TECHCity Technology CS-322F LIGHT SWITCH User Manual CS 322F 20130110

Download:
Mirror Download [FCC.gov]
Document ID	1894345
Application ID	PLbc1QKVfp/urmC1ujKPfA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.84kB (335522 bits)
Date Submitted	2013-02-05 00:00:00
Date Available	2013-02-05 00:00:00
Creation Date	2013-01-10 17:51:42
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2013-01-31 11:43:02
Document Title	Microsoft Word - CS-322F_20130110.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Patrick

Name : 1 Circuit --- Touch,RF,RS485
Model No. : CS-322F
Loading: AC-220V, Max.1,500W
Button/Circuit(s) Settings
1. Please check Annex A to remove the panel.
2. Press & hold the Touch Sensor Area w/ your finger
3. Take a stick to press the Setup Button (feel a “click”),
when the red light on, let go your finger & setup stick.
4. The red light on, means the switch is under the setting mode
(window = 10 Sec.), if not, PLS repeat step (1) & (2).
5. Take a remote (ex. RC-07/RC-09), select Zone (Zone 1,2 or
3), press number (position) then press ON to send the RF
code to the switch.
6. When red led blinks then turns off, it means the setting is
completed. PLS use the remote to control the switch
ON/OFF, to confirm the setting.
7. PLS wait 30 sec. after installed the panel, till the sensor adapt
the thickness of the panel, then you may touch the panel to
switch ON/OFF the light.
8. Control: a.) Touch sensor area to turn ON/OFF the light.
b.) Remote: select Zone (Zone 1,2 or 3), press number
(position) then press ON/OFF.
9. This product can also set ID via RS-485 link, PLS follow
step 1~4 & send code (Light No. [X] [ON]) by PC to the
Warning!
switch to complete the setting.
1. This switch may co-work with a mechanical 2-way SW, PLS prepare voluntarily before installation.
2. This series of SW can be install on wall or collected on the roof. Possesses 2-way cut &
RS-485 communication functions
3. PLS use “Twisted pair + Isolation cloth “cable for RS-485 linkage
4. PLS use M type as doing the RS-485 connection, to ensure the communication signal stable.
5. The largest circuit of each of the RS-485 communication is limited to 32 sets of nodes, more than 32 sets
of nodes or the distance is too long; please use RS-485 node connector.
6. Note: RS-485-type switches are designed for specific engineering applications. Please be sure to contact your
dealer or the company's Technical Services Department before ordering.
7. Be sure to determine the correct wiring of the power supply polarity, wrong wiring will result in damage to the
product and may endanger the safety
8. Before setup, make sure the voltage loading of the circuit switch complies with local regulations.
Improper usage of electric power and exceeding loading voltage will cause damage to the product.
9. This product is a low-power RF wireless carrier communications transmission systems, in order to reduce
environmental obstacles lead to remote insensitive, please try not to use the larger than the average residential
space (details contact Dealer)
Annex A：Panel Installation
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:01:31 11:43:02+08:00
Create Date                     : 2013:01:10 17:51:42+08:00
Metadata Date                   : 2013:01:31 11:43:02+08:00
Format                          : application/pdf
Title                           : Microsoft Word - CS-322F_20130110.doc
Creator                         : Patrick
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:f5de2346-6e17-4e6b-bbab-1751870bf989
Instance ID                     : uuid:1cc203fe-ccc5-48c1-a7bf-4b271067d1cf
Page Count                      : 4
Author                          : Patrick

EXIF Metadata provided by EXIF.tools