TECHCity Technology LM-312M LIGHT SWITCH User Manual LM 311M 312M

Download:
Mirror Download [FCC.gov]
Document ID	1895026
Application ID	0ZaGcwTVKHcGoJ3aIO3Lzg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.93kB (174139 bits)
Date Submitted	2013-02-06 00:00:00
Date Available	2013-02-06 00:00:00
Creation Date	2013-01-10 15:07:05
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2013-02-01 16:40:15
Document Title	Microsoft Word - LM-311M_&_312M.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Patrick

Name : 1 Circuit --- RF, Touched, 2-Way Cut
Model No. : LM-312M
Wiring Diagram:
Power & Loading: LM-312M (AC-110V, Max. Load 1,000W)
PLS check Annex A for the
detail & install switches
according to the site
environment
Button/Circuit(s) Settings
Setting / Control
1. PLS use [-] screwdriver (wound with tape) to dismantle the
panel.
2. Press & hold the Touch Sensor Area w/ your finger
3. Take a stick to press the Setup Button (feel a “click”),
when the red light on, let go your finger & setup stick.
4. The red light on, means the switch is under the setting mode
(window = 10 Sec.), if not, PLS repeat step (1) & (2).
5. Take a remote (ex. RC-07/RC-09), select Zone (Zone 1,2 or
3), press number (position) then press ON to send the RF
code to the switch.
6. When red led blinks then turns off, it means the setting is
completed. PLS use the remote to control the switch
ON/OFF, to confirm the setting.
7. PLS wait 30 sec. after installed the panel, till the sensor adapt
the thickness of the panel, then you may touch the panel to
switch ON/OFF the light.
8. Control: a.) Touch sensor area to turn ON/OFF the light.
b.) Remote: select Zone (Zone 1,2 or 3), press number
Warning!
1. Be sure to determine the correct wiring of the power supply polarity, wrong wiring will result in damage to the product and may endanger th
2. Before setup, make sure the voltage loading of the circuit switch complies with local regulations. Improper usage of electric
power and exceeding loading voltage will cause damage to the product.
3. This product is a low-power RF wireless carrier communications transmission systems, in order to reduce environmental obstacles lead
to remote insensitive, please try not to use the larger than the average residential space (details contact Dealer)
4. If for unavoidable necessary, must do installation under electrified condition, PLS connect LINE (Black) & NEUTRAL (White),
each to their corresponding wire first, turn off the switch, then connect the FIXTURE (Blue), & done!。
Annex A：Wiring Diagram
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:02:01 16:40:15+08:00
Create Date                     : 2013:01:10 15:07:05+08:00
Metadata Date                   : 2013:02:01 16:40:15+08:00
Format                          : application/pdf
Title                           : Microsoft Word - LM-311M_&_312M.doc
Creator                         : Patrick
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Document ID                     : uuid:1ad409f1-c479-4ef3-b837-7f6df73d8860
Instance ID                     : uuid:16336deb-8e2f-4895-809c-f57e46ca56da
Page Count                      : 3
Author                          : Patrick

EXIF Metadata provided by EXIF.tools