TECHCity Technology RP-20F Controller User Manual

TECHCity Technology Co., Ltd. Controller

User Manual

e2-Live Home Automation Edit by Amos /20150810 0 RP-20F AVhome BOX Instruction manual
e2-Live Home Automation Edit by Amos /20150810 1 Index E2-LIVE HOME APPLIANCES INTEGRATOR RP SERIES ...............................................................................................3 HARDWARE................................................................................................................................................................................4 Front panel................................................................................................................................................................................................6 Rear panel.................................................................................................................................................................................................4 Accessary ..................................................................................................................................................................................................5 IR different areas control...........................................................................................................................................................................6 How to operate different IR control…………………………………………………………………………………………………………………....9 RP-20 Home Control Center……………………………………………………………………………………………………………..11 Software Installation of RP-20................................................................................................................................................................12 RP-20 make sure connect to PC..............................................................................................................................................................12 Install USB driver ...................................................................................................................................................................................12 RP-20 SOFTWARE.......................................................................................................................................................................15 CONNECTION .............................................................................................................................................................................15 FUNCTIONS.............................................................................................................................................................................1616 ID setting.............................................................................................................................................................................................1616 Setting ID of iPower(PS-301or PS-302) .................................................................................................................................................17 IR LEARNING...........................................................................................................................................................................18 Preparation before operation ............................................................................................................................................................ 18 Start to learning IR signal.......................................................................................................................................................................18 Situation of need to re-learning...............................................................................................................................................................20 Leave learning mode...............................................................................................................................................................................21 SCENARIO SETTING..............................................................................................................................................................23 Edit lighting & curtain............................................................................................................................................................................23 Home Appliances ....................................................................................................................................................................................24 Scenario tool ...........................................................................................................................................................................................25 Clearn up memory...................................................................................................................................................................................25 Save.........................................................................................................................................................................................................26 Operation with iPower............................................................................................................................................................................26 Scenario validation .................................................................................................................................................................................27 CONTROL VALIDATION .........................................................................................................................................................29 BACK UP....................................................................................................................................................................................31 backup & restore.....................................................................................................................................................................................31 ID & Scenario.........................................................................................................................................................................................32 ABOUT........................................................................................................................................................................................34
e2-Live Home Automation Edit by Amos /20150810 2Version Description Date Ver. Revised contents Software Version 20130709 REV 1.2 Prototype 070803 2013/7/16 REV 1.2 Prototype 071002 2013/07/18 REV 1.2 Prototype 071805 2013/07/23 REV 1.2 Prototype 071805 2013/10/29 REV 1.5 Formal ver. 102902
e2-Live Home Automation Edit by Amos /20150810 3e2-Live AVhome BOX (RP family) Hardware  e2-Live RF Tx/Rx 2 way transmission  Frequency: 433.92MHz +/- 150KHz  Digital ID code (0000~9999)  Receiving distances：open space 60 meters  RS-485 port (open protocol for system installer to control RP-20F) IR Learning processor  Learning IR code：10KHz～455KHz。IR Code length：360 bit。  IR emitting area：7 zones  Power sources: 5V 1.2A Adaptor Software  Can be linked to 7 devices with 29 motions buttons  24 sets of scenarios with function of edit and save, each scenario can edit total 60 motions. Interval can be inserted into the actions of appliance (IR), from 1 to 60 seconds.  Scenario editorial content include lighting, curtains, appliances and other actions.  How many kinds of devices can be remotely control： 7 sets of appliances, each device with 29 motions buttons 5 lighting areas, each with 12 buttons include ON/OFF/ALL ON/ALL OFF/10%~100% dimmer 1 area of curtain control with specifies the brand 24 sets of scenarios  Backup IR learning code and also scenario setting data, could restore all setting parameters  The following operation system is available： Windows XP Windows 7 (32/64 bits) Windows 8 (32/64 bits) Functions / Type RP-05 RP-10N RP-20F Numbers of IR button 29 buttons 7 HA / 203buttons 7 HA /203 buttons Power status detection no no Yes, must be used with iPower or related IR output mode 2 wires IR output 360 degree IR output 360 degree+7 wires specify separate output Number of order/Macro 60 commands /10 macros 60 commands /10 macros 24 scenarios, 60 commands/ scenario (lighting & curtain control is available) Macro setting edit tool/type RC-09, limited in macro 1,2 RC-09 limited 1~10 RC-09 limited 1~10/ PC scenario 1~24 Suitable environment IR extension small areas Home appliances Lighting/Curtain/HA/Scenario control Others Hidden, IR emission Celling/wall/Desktop Host with USB port, edit setting software
e2-Live Home Automation Edit by Amos /20150810 4Hardware Front Panel Rear Panel 2 pieces of infrared emission LED can be fine tune up/down or left/right (First control point) IR in：IR signal input, from your remote control of appliances. Status：Blue color, IR emission indicator (Indicator will flash while in learning IR code) Tx/Rx：Red color, RF wireless emission and received indicator. IR emission point 2~7 can be extended to the front window of appliances for individual control USB socket, connected to computer Main power input: please make sure use the suitable specification of 5V 1.2A, please take the original packaging adaptor to avoid damage occur. Power current ability less than 1.2A will cause IR operation incorrect No.1 Wiring IR extended emission port, has the same time emission with front IR LED RS-485 (Open protocol for project model used only) 9 pieces of infrared emission LED (First control point)
e2-Live Home Automation Edit by Amos /20150810 5Accessary Extended IR emit wire X 2(1.8m) USB connector wire to PC DC Adaptor (5V 1.2A) CD catalogue & instruction manual Double side adhesive X 6 pieces
e2-Live Home Automation Edit by Amos /20150810 6IR individual areas control RP-20F IR – total 7 areas Point 1: Surround infrared emission on top cover, has the same time emission with the point 1 port of the rear panel Up / down, left / right, Emission angle can be fined tune Applications: Surround infrared LED has 360 degree emit to control whole of home appliances of open space in the same room. IR emission distances: 15 meters maximum, left/right 15 degree fine tune In case of glass, IR refraction may beyond the control range, but you can fine tune the direction of the LED to come into the control range, therefor, before installation, suggest to find out all of the location of your appliances, then choose the suitable place. Open space maximum 15 meters Surround emission Point 1 wired IR output
e2-Live Home Automation Edit by Amos /20150810 7Corresponding to the position of the remote control and setting software RC-09 Operating device + device + action = first point emission For example: TV TV Power, the RP-20 will sent emission by the first point of IR infrared signal . RP-20 software Control Validation / infrared appliances scenarios set / Appliances RP-20 first point controls with six IR emitter + a wired control, you can handle most of the device which is not accommodated in the cabinet environment. But the remote controller of e2-Lvie is only RC-09, RP-20 remote control software support the first point emission, if this environment controlled by the first point, it will control in the range of all of the appliances, we recommend using All emission,the model can achieve the same effect as well. All emission support all kind of remote controller of e2-Live. such as RC-09, itouch, VC-1500 Consistent with previous operating mode, HT-100, RP-20 software, etc., select the device (TV, DVD ...) first, then press (Power, CH +, CH- ....), After RP-20 received, all of the IR emitor will emission at the same time, no need to specify a fixed point. The conditions of single point emission are: There are two same brand device in same space, in order to avoid action together, it will need to specify a single point of emission For example, air-conditioned in living room or master bedroom. Learn the IR signal of air-conditioned to A / C position, The living room can using the first point emission which can emit to all space of the room. The air conditioning of the master room can use a single point of independent wiring type remote control If both need to be controlled together, you can adopt all points emission. After pointing device button and choose "Point 1" emission. The RP-20 will send an infrared signal from the first IR emission point. When the scenario is set, if want to output the first point, then please click on "1",
e2-Live Home Automation Edit by Amos /20150810 8Point 2 ~ 7 are wired control 1. Appliances in Audio/Video cabinet tank: IR signals cannot penetrate the veil, if the device is placed in the cabinet tank, IR emission lines need to be extended to the cabinet in order to control 2. Devices are placed on the range of control IR extension wire can help to solve the problem of IR emit signal been cut off by shelter. 3. If two same brand devices were placed in the same place, for example, the air-condition of living room, master bedroom, Learning IR signal of your air condition onto the button of A/C Use top open IR to remote the air condition in the living room Put point 1 wiring IR to reach your master bedroom to control your second air condition If you want to control both of your air condition, you can use all emission output RP-20 package provides two IR infrared emission lines, connect to appliances can be installed according to the needs of the field wiring. Packaging box with two IR emission line, please let emitting LED being positioned to front of the receiver (attached double-sided adhesive) Position of the IR reception 2~7 ports of IR individual output
e2-Live Home Automation Edit by Amos /20150810 9 How to operate the RP-20F control points individually RP-20F support individual IR emission, following devices can be control individually. RP-20 software, Need to be open by PC RC-09 smart controller, provide three control type of whole region, point second, and point third iTouch APPsoftware, provide whole region, point second, and point third Individual IR control are related with RP-20 wiring and scenario editing actions, according to the installation environment, make sure which device need to be individual control, and with the matching use of hardware and software. The following, for the above-mentioned current e2-Live system provide individual operator interface will be described. Use the software of RP-20F (need to connect to PC) Use RC-09 smart controller 1st press device, example , 2nd press , then all of the IR emit at the same time 1st press device, example , 2nd press , 3rd press , then point 1 of IR emit 1.Select device 2. select which point of IR need to emit 3. press action button to emit has been selected point Number 11 denote second point of IR Number 12 denote thethird point of IR emission
e2-Live Home Automation Edit by Amos /20150810 101st press device, example , 2nd press , 3rd press ,then point 2 of IR emit 1st press device, example 2nd press , 3rd press , then point of 3 IR emit Use itouch (use with PC-09W or PC-09I, Wi-Fi emission) Operation same as RC-09。 Select device first, example , 2nd press , then all points of IR emit Select device first, example , 2nd press , 3rd press , then point 1 emit Select device first, example , 2nd press ,3rd press ,then point 2 emit Select device first, example , 2nd press ,3rd press , then point 3 emit Point 2 emit (Same as RC-09, number 11) Point 3 (same as RC-09, Number 12)
e2-Live Home Automation Edit by Amos /20150810 11RP-20 Home Control Center 1. Please insert the installation CD, it is in the packaging box 2. Installation CD will auto run and open its homepage Software installation of RP-20 Click RP-20 executive program to auto run installation During installation the program may ask you to download the update system of framework, Each computer may have different necessary, please make sure your PC can be connected to network, RP-20F will install necessary program automatically. Click Install Installing RP-20 (takes very short time to install) After completed install, RP-20 will auto open See the software is opened means that the installation is completed You will find active program of RP-20 in the list of Start/All programs
e2-Live Home Automation Edit by Amos /20150810 12RP-20 make sure connect to PC Remove the connector wire out of the package, connect RP-20 and PC + + Note：By using this connector wire to connecting RP-20 with PC to setting any parameters through your PC, does not require a transformer, RP-20 can be powered by PC Power source of PC, but if the setting is completed, installed in a fixed location, Please use the power adapter attached with the package to ensure that the operation of RF and IR transmitter function properly. Install USB driver Connect USB wire to PC, on the screen of right down angle of the PC will show that had automatically found the device of RP-20 USB. x If the computer does not have a suitable driver, the follow message will appear. Or from the Device Manager to confirm whether the RP-20 USB devices can be used Support PC system Windows XP Windows 7 (32/64 位元)Windows 8 (32/64 位元)
e2-Live Home Automation Edit by Amos /20150810 13 If you turn on RP-20, no clickable COM on pull-down menu of the right connections,the USB device is not properly enabled, it can not be connected. If you have any of the above circumstances occur, which means that you need to install RP-20F USB driver manually. take the CD out of the package insert into the CD slot, click USB driver to install. With an exclamation point, which means that the device can not be used, you need to install the driver.
e2-Live Home Automation Edit by Amos /20150810 14 After installation, please re-plug RP-20F USB once again, let the computer detect again. Finish Open RP-20 will automatically appear maybe several connectable positions of COM. Please go to Device Manager to confirm the correct position of the COM, in order to successfully communicate with RP-20. 目前RP-20 取得的連線COM位Please choose the same COM position for RP-20 Click DETECT, currently there are actually connected to RP-2, its software will connect based on hardware COM positionIf there is only one COM position or you had selected the clearly known one, then you can press CONNECT to link
e2-Live Home Automation Edit by Amos /20150810 15RP-20 software Connection Before RP-20 be open, please use USB wire connect RP-20 with PC, then COM port will be detected Home page setting If RP-20 AVhome Box had been connected to PC, then press Detect to automatically find out the connection of COM port. If unconnect If you can not successfully connect, please re-plug USB connector of RP-20, and re-open the software automatically to execute the detect again
e2-Live Home Automation Edit by Amos /20150810 16Functions ID Setting Input 4 digital ID code, Press “wright” to input (0000~9999) When enter impleted 4 digital numbers, it will be field with “0” in front of your input numbers, such as input” 123”, the actual ID would be “0123”, input “66”, would be “0066” When writing success, RP-20 AVhome Box will prompt buzzer and LED. buzzer short “Bi” 4 times LED : Red flash 2 times Here will display the instructions
e2-Live Home Automation Edit by Amos /20150810 17Setting ID of iPower (PS-301 or PS-302) RP-20 work together with iPower to make sure the devices’s power is ON or OFF. This special designed is to solve bland power ON/OFF control on scenario mansging. Perform this function, please plug your home appliances in smart socket of iPower. Use this page, you can setting the location of remote control. Note: This setting must work with our smart socket iPower, specify the selected button of iPower to get into learning mode. Press selected button of this setting page. Such as TV，CD，DVD….. iPower’s red LED will flash, it means received your command and completed setting. Use this For setting ID code, please click the corresponding button of appliances which was plugged into the iPower.r Quick flash indicate successful ID setting If tgere isn’t any flash display, please repeat steps 1~3 Press and hold this buttonPoke a button in setting hole LED solid red (waite for setting ID code) Setting button and indication of LED Use attached setting sticker or paperclip for setting There are 3 AC sockets can beindividual control, and the mechanical tact switch is available If you use this ID wrighting mode, iPower will be set as not received to remote control all power off, please refer to the user menu of iPower for other setting mode
e2-Live Home Automation Edit by Amos /20150810 18IR Learning Preparatory actions before the operation： Tools needed: the original remote control of home appliances z Make sure your home appliances is in the status of energized (Through the phone to activate the camera function), facing camera of your smart phone, press any button of any remote controller, if the emitting light of your remote controller can be seen, that means the emission of remote controller is in normal situation. z Firstly planning useful remote keys of appliances (for example TV) to the correspondent button on RP-20. Start to learn IR signals： 1. Press “Start Learning” button to enable right side buttons function 2. Press the button which to be learned of the device. Such as TV, the following 29 action buttons will become to the usable status. Equipments area become to be a usable status, press TV button into TV learning mode. Buzzer Long Bi~ Red LED flash twice then goes off Blue LED always on
e2-Live Home Automation Edit by Amos /20150810 19 3. Press corresponding function of a button on, such as ： 4. Pick up your remote controller of appliances, facing emission LED to RP-20 ”IR in” then press down the power button to input power ON/OFF code. Attention: means into learning mode 29 action button will enable the buttons to have the function of press Buzzer Short Bi LED Flash Blue LED Buzzer Short Bi LED Blue LED flashed and then stable on IR in, Please alignment here with your remote controller of appliances Use your home appliance's remote to input button signal
e2-Live Home Automation Edit by Amos /20150810 20 5. Repeat step 2~3 to continually to learn remote signal into RP-20 Situations of need to re-learn 1.After input IR signal, if Please re-press the button of appliance IR signal 2. After input IR signal, when you hear of Re-press a button of RC-09, then re-press the button of remote controller, if always fail, If the learning has failed, please contact your dealer for help. . Press “Start learning” then you can select any one of the following devices to get into remote code learning Note: After you came into learning mode, if you don't action within 15 seconds, RP-20 will leave out the learning mode. Beep of buzzer: RP-20 will enable the button of Start Learn. Press again into learning mode once more. Buzzer Short Bi three timesBuzzert One long, one short LED Red flash twice Blue stable on LED Slowly flashing blue LED …. This faded button means it is in the status of learning mode
e2-Live Home Automation Edit by Amos /20150810 21Leave Learning Mode 1.Completed learning all of your appliances IR, please press “Stop Learning” for interup learning mode.” 2. In learning mode, no action over 15 seconds, RP-20 will leave learning mode automatiically When completed all learning action, suggest to operate again all of the buttons of RP-20 for confirm all learning are successfully. Please switch to the following screen: Control ValidationÆInfrared Appliances，Check Operation Bizzer One long Bi~ two hort Bi~ LED Red LED flashed twice and turn off Blue LED flash andfinally distinguish “Start Learing” recovery means leave learning mode
e2-Live Home Automation Edit by Amos /20150810 22 Sequence of operations: 1. Select equipment 2. Select "All emit" 3. Press the right action key 4. Make sure the corresponding buttons are successfully remote control, if there is not, please repeat the learning sequence. RP-20 can specify a different signal IR emitting region If you just want to verify that learning is successful, select "All emit”
e2-Live Home Automation Edit by Amos /20150810 23Scenario Setting Edit lighting & curtain Editable Setting 24 Macros RP-20AVhome Box1~24 Macros ID can be specify difference with RP-20 to corresponding lighting, curtain, and iPower. Please note that in use of any remote control device operation, remote controller ID must same as RP-20, not same as scenario. Devices Light 01 Light 02 Light 03 Light 04 Light 05 Curttain (specify) Keys 01~12 Actions Lighting ON/OFF ALL ON/ALL OFF
e2-Live Home Automation Edit by Amos /20150810 24 Edit Home Appliances Interval: (only appliance action can be inserted interval) from 1 to 60 seconds, up/down to choose or key in the wanted numbers of seconds, maxmum is 60 seconds, more than 60 seconds are limited to 60 seconds. 0 second and 1 second do not have the significant effect. Note: During execution scenario of RP-20, if setting none detect, the interval time still working, for example, TV Power still ON and 10 seconds interval, if the power been detected ON, will perform 10 seconds interval before next action 7 appliances can be choose IR emission location 1~7 & ALL Appliances 29 action If choose power, then must select the status of electric power detection Using iPower to detect appliance power scosumption, according to scenario demands to choose Still ON: detect and asure the power is always ON Still OFF:detect and asure the power is always OFF (refer to P19 for detail instruction)
e2-Live Home Automation Edit by Amos /20150810 25Scenario tool Clearn up memory Empty single scenario action of RP-20, make sure the connection between RP-20 and PC is in normal status before performing. Select the scenario which you want to be deleted After data selected, press here for adding one new command on the bottom of the list Select and move edited data up and down for smooth scenario controlRecovery a previous action, you can always forward recovery Click to delete a selected single data row Save the current page of single scenario setting Save all 24 scenario setting, will take a little time, please be attention to see front RxTx red LED, Stop flash means save compled Still flashing means saving in progress, do not try to operate other function for safty saving RxTx Red LED Flashing three times then turns off
e2-Live Home Automation Edit by Amos /20150810 26According to the following steps, you could insert one action into scenario edit setting program planned well your action conditions, press to add in this edit setting row Click this edit setting row, use to move this edit setting row to where you want be placed Save Single scenario storage, only saving the current scenario of the screen All scenario storage, saving all of the scenarios from No.1 ~ No.24 will take a little bit longer, please make sure it was completed saved after red LED slow flash is stop. During storage, the screen will be temporarily unable to carry out any operation action, please do not remove the USB link cable, so as not to affect the action of storage. operation with iPower 1. Plugs appliances into iPower, such as TV, DVD,CD 2. Use RP-20 to setting the location of remote control (refer to p4) 3. Fine tune every detection of home appliancesons on ipower to make sure correct detection (please refer to iPower menu) 4. Use RP-20 software / scenario edit / power current detection defined Content of scenario edit TV (must to open TV) Still power ON：During perform scenario, RP-20 will check the power current status of TV If the TV is in the status of power ON, then RP-20 do not send out the command action. (to avoid reverse action) If the TV is in the status of Power OFF, then RP-20 will send out the command action to turn on TV Note: Please make sure the main power of iPower is in the status of Power ON, You can recognized the current status of appliances powerby iPower Still power OFF：If TV is in the status of power off, then RP-20 do not send out the command action (to avoid IR reverse action)
e2-Live Home Automation Edit by Amos /20150810 27 If TV is always ON, then RP-20 will send out the aommand to turn off the TV No detect：Don＇t care the status of appliances power ON or OFF, just perform the command of scenario. Scenario Vaidation setting After completed editting and storage of scenario, suggest to confirm the correctness and fluency of perform of scenario, if there is any problem of action then you could easy adjust and fine tune on setting page. Please switch to the following page to perform : control verificationÆscenario verification Scenario editing note: RP-20 provides a rich scenario editing functions let e2-Live scenarios easier to play with the performance of the operation Also need special attention to several important functions when editing a scenario, in order to ensure actually perform the operation of scenarios. 1. RP-20 porovide 7 zones of IR individual emission, with 2 to 6 points of wiring type IR, please make sure the wire is connected to correspondent device for correct remote control. 2. RP-20 provides intelligent power sockets combined with iPower, in scenario editing, there are 7 appliances can detect the actual status of power on / off, if used with iPower, in order to better ensure the accuracy of the scenario action, please make clarify the initial conditions of power ON/OFF 3. RP-20 provide IR with the insert interval function, Lighting and curtain control doesn’t have such Press the button of just edited and storaged. RP-20 will execute the function of scenario, please pay more attention in it should be complete execution
e2-Live Home Automation Edit by Amos /20150810 28function. 4. RP-20 provide different ID for lighting and curtain control, please make sure and input the scenario’s ID before saving, this ID would be stored to RP-20 while saving. 5. After scenario storage, please use Control Verification/Scenario Verification to test immediately to make sure your setting is correct and adjust instantly. Scenario remote controller. You can also use the following remote controllers to perform the following actions scenarios Link to other scenario control RC-09 smart controller (Scenario 1~10) HT-100 LCD Controller (Scenario 1~24) + PC-09W/I+APP software (Scenario1~24) Macro controller (2~6 buttons) LC-X0T(Gang box) MS-X0T(Wall mount) (Scenario 1~10) FS-02N Trigger linking controller (Scenarios 1~10) VC-1800 family Video server+PC-09N (Scenarios 1~10)
e2-Live Home Automation Edit by Amos /20150810 29Control Verifications RP-20 software : The purpose of control verification is to make sure its works after IR learning and scenario setting, it also provide remote control of lighting and curtain, it could be remote control all function of e2-Live via this software. In operation, the network connections of RP-20 or PC must be maintained. Lighting & Curtain Guided operation buttons, select device in sequenceÆLocationÆDimmer/ON/OFF( Dimmer switch only) ALL ON / ALL OFF is for 1st ~5th areas ALL ON/ALL OFF, curtain control is operated with specify brand. 1 2 2 3
e2-Live Home Automation Edit by Amos /20150810 30Appliances Infrared control Select device--ÆIR emission location--ÆAction button Scenario verifications Press button of scenario 01~24，RP-20 will be executed immediately, be careful to operate, 。during operation of scenario, it does not accept others remote commands again.
e2-Live Home Automation Edit by Amos /20150810 31 Backup Setting Backup recovery For RP-20 to read out the backup setting data The information of RP-20 software could backup or recovery are as follow： 1. Remote ID 2. Infrared learning data 3. RP-20 AVhome Box scenario settings Its takes about 2 or 3 minutes to backup or recovery. Do not remove the USB connection, in process of backup or recovery to avoid error reading or wrighting. Press The default storage path, suggest do not changed File names can be modified in either Chinese or English
e2-Live Home Automation Edit by Amos /20150810 32Backup purpose 1. If there is any probrom of RP-20, then you could revovery back to initial status 2. Copy to another RP-20 Recovery： ID & Scenario For RP-20 software setting is finished【Scenario & ID data】, You can save as a file to PC RP-20 can save a single or all of the scenarios to PC for storage, and read back to RP-20 by Input. Purpose of output data of scenario 1. Save for backup file 2. For the purpose of revise current setting data of RP-20 to reduce re-setting time
e2-Live Home Automation Edit by Amos /20150810 33 Output file Open/Close/Muting RP-20 In IR learning, RP-20 is recommended to open the buzzer can help confirm the operation action Output: Save the current scenario settings to PC for later revised using (could be one or more) Press The default storage path, suggest keep the path File names can be modified in either Open Close
e2-Live Home Automation Edit by Amos /20150810 34RP-20 host has received. After editing operation is completed with the relevant settings, you can choose to turn off the buzzer About Restore factory settings： Press and then , IR learning data and scenario setting will be cleare. Please be sure to confirm before execution. ID will be retained, so if you need to change the ID, please use the Home page’s ID settings, to re-write ID Buzzer Long Bi Software Version
FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu