TECHNOGYM S p A GIT000004 RFID module User Manual NFC
TECHNOGYM S.p.A. RFID module NFC
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2029486 |
| Application ID | DObTg1cWa2JU+tWSV7ICCA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 45.3kB (566277 bits) |
| Date Submitted | 2013-07-31 00:00:00 |
| Date Available | 2013-07-31 00:00:00 |
| Creation Date | 2013-06-27 17:47:58 |
| Producing Software | Bullzip PDF Printer / www.bullzip.com / Freeware Edition |
| Document Lastmod | 2013-06-27 17:47:58 |
| Document Title | Microsoft Word - NFC User Manual.doc |
| Document Author: | fdamiani |
TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 NFC User Manual.doc Pag. 1 di 8 Technogym ® NFC 12V Reader 0wq00484AB User/Integration manual Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 NFC User Manual.doc Pag. 2 di 8 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 Table of contents General overview ................................................................................................... 3 Description ............................................................................................................ 3 Communication and connector ............................................................................... 5 Operating mode .................................................................................................... 5 NFC compatibility................................................................................................... 7 Mechanical dimensions........................................................................................... 7 Installation ............................................................................................................ 8 FCC Statements ..................................................................................................... 8 Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 NFC User Manual.doc Pag. 3 di 8 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 1 General overview NFC 12V Reader with Technogym code 0wq00484AB is an accessory of Technogym Equipment that let them communicate with Technogym MyWellness app running on NFC enabled mobile phones, in a contactless way. Once a NFC phone is approached to the NFC 12V reader it automatically launches Technogym MyWellness app on the phone and exchange user specific training data to the equipment. In this way the equipment unequivocally identifies the user and configures itself with a GUI, workout and training time specifically for this user. 2 Description NFC 12V Reader is made by a board inside a plastic housing that may change depending of the Technogym equipment where the device must be mounted on. Technogym equipment can be enabled to interact with NFC mobile phones connecting NFC reader 0WQ00484AB and with Technogym Mifare Classic tags connecting Mifare reader 0WQ00485AA “in chain mode” to NFC reader, as follow: Optional accessory Technogym equipment (host) NFC reader (first) Mifare reader (second) Picture 1 – System block diagram NFC reader and Mifare reader never work at the same tame. Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 NFC User Manual.doc Pag. 4 di 8 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 This block diagram can be better understood in the next picture, overlayed with the real equipment: Mifare reader (second NFC reader (first) Technogym equipment (host) Picture 2 – Equipment with overlayed block diagram The connection to the host is made by means of a cable that allows: Device powering; Data communication (the host SW manage a serial port switch to enable once the NFC reader and once the Mifare reader, working in time slots). The module antenna is embedded on the board and its positioning on the equipment is shown with a specific indication: NFC antenna indicator Mifare reader indicator Picture 3 – NFC and Mifare indications. Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 NFC User Manual.doc Pag. 5 di 8 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 3 Communication and connector Connector of NFC 12V Reader has the following signals and pinout: Data • • • • Picoblade Molex on the device (on board) Description +12Vdc TX out RX in N.C. N.C. N.C. N.C. GND communication is standard RS232 with next parameters: Baud rate: 115200 bps; Data bits: 8; Parity: None; Stop Bit: 1; Over this serial communication Technogym has developed a proprietary communication protocol implemented on every host that may be connected to this device. The SW driver for the NFC Reader is developed by Technogym an integrated into Operating System of the host. 4 Operating mode The Technogym equipment host switches continuously between NFC and Mifare reader, looking for a compatible device present in the RF field. NFC reader will communicate to NFC mobile phones once the phone is located in the RF field. After that mobile phone with preinstalled Technogym MyWellness application will manage the communication to the equipment, that will be able to unequivocally will identify the user and its training data. Use case is shown in the following pictures: Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 NFC User Manual.doc Pag. 6 di 8 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 Picture 4 – User places NFC mobile phone in front of NFC indicator Picture 5 – User identified from the equipment through NFC link Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 NFC User Manual.doc Pag. 7 di 8 5 NFC compatibility The NFC module will be compatible with the following handsets: • • • • • Google NEXUS S Samsung GALAXY NEXUS GT-i9250 Samsung MINI 2 S6500 NFC Sony Xperia P LT22i LG 4X This list may be subject to future changes according to new devices released on the market in the coming months. For a complete list of devices which integrate NFC please refer to: http://www.nfcworld.com/nfc-phones-list/ http://www.paywithisis.com/ http://www.nfc.cc/nfc-phones/ New mobile phone compatibility will be obtained through a software update. 6 Mechanical dimensions The NFC 12V reader has the following mechanical dimensions: Reference PBC_W PCB_L PCB_H Ant_W Ant_L MAX dimension 83mm 45mm 1.6mm 40÷60mm (tbd) 40mm The electronic board has all components on one side only and the connectors must be of type SMT. Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13 NFC User Manual.doc Pag. 8 di 8 TECHNOGYM S.p.A. Via G. Perticari, 20 - 47035 Gambettola (FC) - Italia Tel.: +39 (0) 547- 56047 Picture 6 - NFC 12V reader mechanical dimensions 7 Installation Each equipment has a specific upgrade kit to upgrade it with NFC 12V Reader 0wq00484AB, please refer to the specific equipment service manual to get the right part number with the right housing and the right installation procedure. 8 FCC Statements FCC § 15.19 Labelling requirements This device complies with part 15 of the FCC Rules subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. When integrating the module into end products, the end product label shall be marked in the following way: Contains FCC ID: ZQWGIT000004 FCC § 15.21 Information to user Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Rev. 1.0 Author: Alessandro Cevoli Data di stampa: 27/06/13
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 8 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : 70590cd8-e19c-11e2-0000-9c72a45c3ae3 Producer : \376\377\000B\000u\000l\000l\000z\000i\000p\000 \000P\000D\000F\000 \000P\000r\000i\000n\000t\000e\000r\000 \000/\000 \000w\000w\000w\000.\000b\000u\000l\000l\000z\000i\000p\000.\000c\000o\000m\000 \000/\000 \000F\000r\000e\000e\000w\000a\000r\000e\000 \000E\000d\000i\000t\000i\000o\000n Modify Date : 2013:06:27 17:47:58+02:00 Create Date : 2013:06:27 17:47:58+02:00 Creator Tool : UnknownApplication Document ID : 70590cd8-e19c-11e2-0000-9c72a45c3ae3 Format : application/pdf Title : \376\377\000M\000i\000c\000r\000o\000s\000o\000f\000t\000 \000W\000o\000r\000d\000 \000-\000 \000N\000F\000C\000 \000U\000s\000e\000r\000 \000M\000a\000n\000u\000a\000l\000.\000d\000o\000c Creator : \376\377\000f\000d\000a\000m\000i\000a\000n\000i Author : fdamianiEXIF Metadata provided by EXIF.tools