TECNITOYS JUGUETES 0014-9T My First Scalextric User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	991787
Application ID	HDeVFdWKcGqf1sx3h+4SAA==
Document Description	Users Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.04kB (275450 bits)
Date Submitted	2008-08-28 00:00:00
Date Available	2008-08-28 00:00:00
Creation Date	2008-08-20 09:22:46
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual 1

CE COMPLIANCE STATEMENT
TecniToys Juguetes. S.A., Avda. Diagonal 545 7“, 08029 Barcelona, here by states that:
My First Driving School by SCX ref. 18000
Complies with the following European Directives:
- 88137ch as amended by 92/59/EEC and 93/68/EEC. Toy Safety Directive.
- QC/S/EEC . (Compliance assessment for telecommunications devices), radio control toys
This statement is issued based on compliance with the following European Standards:
- EN 71:1998/1 (+A5:2000+A12001+A2,A6,A7:2002+A822003+A9,A10,A11:2004) y EN 71 :2003/2
EN 50088:1996 + A1: 1996 + A2: 1997 + A3: 2002
EN300-220-1 (VHS-1 2002—09
EN300-220-3 (V1 -1 -1 2002-09
EN301-489—1 (V1-4-i 2002-08)
EN301»439»3(V1~4-l 2002-08)
Any non specified use of the instruction manual and/or the use of the product for any task or purpose other
than that it was designed and manufactured for, will void this statement and be user’s entire responsibility.
This pioduciwas manuiaotiled hya company which oomplies with European Directive 2002/96/56 corineming elemrical and electronic apparatus
and managementol waste therefrom.
The product may contain substance which are harmful to the environment if they are handled improperly ur in a manner which contravenes
miren’i legislation. The crossed-out mitiainer is a symbol illustrating scleclive disposal of electrical or elerfimnic apparatus in order to encourage
its recycling wherever possible.
_ Please show responsibility towards the environment and recycle this product attire end of its uselul life.
WARNING
Improper use 01 me remote controller batteries may lead to overheating, battery leakage, explosion and damage or injury. Please
read the following instructions careiully.
b Do not attempt to recharge non-rechar eable batteries.
- Remove the batteries from the toy to cgarge rechargeable batteries.
- Charge rechargeable batteries uhdersupervision.
- Use batteries of the recommended type or the equivalent.
- Do not short-circuitthe power terminals.
- Do not mix different makes of battery togemer.
- Do not mix new and used batteries.
Do not mix alkaline, standard (zinc carbon) and rechargeable (Ni-Cd) batteries.
Insert batteries the right way round as regards polarity. as shown In the battery compartment.
Remove used batteries from the vehicles and controllers, and dispose of them in the appropriate container.
Do not put batteries on a tire, or allow them to leak or explode.
Avoid children handling the batteries. Batteries must be changed by an adult.
' Keep these instructions for future reference.
NOTE: 9183995 or modifications which are not expressly approved by the manufacturer may invalidate the user’s authorization
to use t is evice.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to opeiale
the equipment
NOTE: This equipment has been tested and found 03 comply with the limits fora Class B digital device, pursuant to Pail 15 oi the FCC Rules These limits
are designed to pnwide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and. if not installed and used in accordance with the instructions, may cause harmful interference to radio communications
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which an be determined hy turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more oi the following measures:
0 Recrieni or relocate the receiving antenna. t increase the separalion between the equipment and receiver. - Connect the equipment into an outlet on a
circuit ditlerent from that to whlch the receiver is needed. . Coreult the dealer or an experienced radio/TV technician for help.
Only for USA
FCC lD 9H-0014A7T/ V9H—0014 Tl V9 0014 MADE lN CHlNA This itey' part 15 of the FCC Rules. Operation
‘ to the following two cond ns 1) this device may not cause harmful interference, rid (2) this device must accept any
interference received, including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2008:08:20 09:22:46
Page Count                      : 1

EXIF Metadata provided by EXIF.tools