TECNO MOBILE AX8 Mobile phone User Manual Sanjeev

Download:
Mirror Download [FCC.gov]
Document ID	3588416
Application ID	yx35iaN5f3+zTqLoQfId5w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	86.66kB (1083295 bits)
Date Submitted	2017-09-29 00:00:00
Date Available	2017-09-30 00:00:00
Creation Date	2017-09-21 16:16:19
Document Lastmod	2017-09-21 16:16:19
Document Title	Sanjeev
Document Creator	WPS Office
Document Author:	daishengsheng

User Manual
Mobile Phone
Model：
Model：AX8
1 Taking care of your device
Your device is a product of superior design & craftsmanship
and should be handled with care: The following
recommendations will help protect your phone:

Keep the device dry. Precipitation, humidity,
and all types of liquid or moisture may contain
minerals that can rust electronic circuits. Shut down
the phone when it suffered water damage (Do not pull
out the battery), and boot up the phone after it is dry.

Do not store the device under extreme
temperatures;
temperatures; it can damage the battery and shorten
device lifespan.

Do not use or store device in dusty and dirty
areas;
areas; the electronic components may be damaged.

Do not attempt to open device in any way
other than instructed in this guide. Repairs attempted
by an entity other than designated service
agent/center will void warranty.
Licking the charger is strictly prohibited; saliva is more
corrosive than water. Residual saliva may short-circuit
phone and damage its motherboard, causing the device to
become inoperable; charger may also be damaged in the
process.
WARNING:
Licking USB plug is strictly prohibited.

Do not drop, knock, or shake device. Rough
handling can disrupt internal circuit boards and fine
mechanical
mechanical parts.

Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the device. Use a soft
and dry cloth to wipe down surfaces.
Battery & charger safety





Do not place battery in fire,
fire, explosion may
occur. With concern for the environment, please abide
local laws & ordinances in battery disposal.
Only use original battery, charger, and
accessories applicable to the specific mobile model.
Failure to do so voids the warranty and may result in a
hazard.
hazard.
Power off mobile prior to testing its charger. If
charger malfunctions, off-mode will prevent damage
to the motherboard.
Please keep the charging mobile away from
small children.
Do not touch charger or mobile with wet hands;
it’
it’s hazardous and may damage electronic parts.
WARNING:
WARNING:

Risk of explosion if original battery is replaced.
replaced.

Tampering with mobile OS and ROOT voids
warranty and may cause software instability.
2 Know your phone
1.
3.
5.
7.
9.
11.
13.
15.
17.
Earphone plug
Receiver
USB port
Front camera
Volume key
Light/proximity sensor
Virtual key
SIM card slot
Tri-color light
2.
4.
6.
8.
10.
12.
14.
16.
Power key
Rear camera
Flash
Speaker
Microphone
Microphone
Front flash
Fingerprint ID key
T-card slot
3 SIM / SD card installation
1. Power off mobile.
2. Refer to the following picture for SIM / SD card
installation.
4 Home screen
Home screen showcases frequently used apps, you can
also display ubiquitous information
information such as time, date,
etc.
5 Dialing
Tap the phone icon to open call interface. Enter contact
number via keypad to start a call. The keypad interface
also enables functions such as texting and contact
storage.
6 Notification & function toggle
The notification screen displays new information & events;
simply tap the notification to access its detailed content.
The function-toggle screen lists commonly used functions
and their virtual switches. Tap a switch to quickly turn a
function on/off.
7 Messages
The message function sends plain or multimedia texts to
your friends. Tap a message to view its content. Tap the
“Compose new message”
message” key to start composing a
message
message and send it to designated contact.
10
8 Camera
The camera function captures your surroundings via the
front or rear camera. Various types of white balance are
available to accommodate different lighting conditions.
Beauty function can be used with selfies.
selfies.
11
9 My picture
My picture can be used to browse images and photos from
mobile or SD card storage; editing functions can be
performed. Images can be designated as wallpaper or
contact avatar. The sharing function allows images to be
shared with friends via Bluetooth and MMS, etc.
12
10 Wi-Fi
Enabling Wi-Fi grants access to local hotspots and allows
you to browse Internet. Private networks will require a
password.
13
11 Factory data reset
“Factory data reset” resets all configurations to their
default state. Internal mobile storage is cleared of all data
including apps, photos, music, videos, mail, contacts, etc.
This procedure may take a long time. Please wait patiently
for mobile to restart and do not power off.
WARNING:
Factory data reset as a last resort. Once activated all user
data & configurations are deleted and cannot be restored.
14
FCC Caution.
Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is
subject to the condition that this device does not cause harmful
interference.
Information to user.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Information to the user.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
15
-Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This Mobile phone meets the government's requirements for
exposure to radio waves. The guidelines are based on standards that
were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards
include a substantial safety margin designed to assure the safety of
all persons regardless of age or health.
FCC RF Exposure Information and Statement The SAR limit of USA
(FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:
AX8(FCC ID: 2ADYY-AX8) has also been tested against this SAR limit.
The highest SAR value reported under this standard during product
certification for use at the ear is 0.67 W/kg and when properly worn
on the body is 1.40 W/kg. This device was tested for typical
body-worn operations with the back of the handset kept 10mm
from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 10mm separation
distance between the user's body and the back of the handset. The
use of belt clips, holsters and similar accessories should not contain
metallic components in its assembly. The use of accessories that do
not satisfy these requirements may not comply with FCC RF
exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations. To comply
with RF exposure requirements, a minimum separation distance of
1.0 cm must be maintained between the user’s body and the
handset, including the antenna. Third-party belt-clips, holsters, and
similar accessories used by this device should not contain any
metallic components. Body-worn accessories that do not meet these
16
requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
17

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 17
Author                          : daishengsheng
Comments                        : 
Company                         : 
Create Date                     : 2017:09:21 16:16:19+08:16
Creator                         : WPS Office
Modify Date                     : 2017:09:21 16:16:19+08:16
Producer                        : 
Source Modified                 : D:20170921161619+08'16'
Subject                         : 
Title                           : Sanjeev
Trapped                         : false

EXIF Metadata provided by EXIF.tools