TEKSUN TECHNOLOGY 5B103BT Bluetooth speaker User Manual C8ABD2B3B4ABD5E6CDBCC6AC

Download:
Mirror Download [FCC.gov]
Document ID	2646935
Application ID	Y57pf2jE2d8U1sIpmUFWGg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	262.83kB (3285398 bits)
Date Submitted	2015-06-14 00:00:00
Date Available	2015-06-15 00:00:00
Creation Date	2015-05-27 14:25:37
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-06-12 14:53:00
Document Title
Document Creator	PScript5.dll Version 5.2
Document Author:	toby

Splash Block Blue’roofh Speaker
Operation Manual HY—SPLH
FCC ID: 2ADXMSBIOBBT
BT ID: D025318
Thank you for purchasing the Hype® Splash Black
Bluetooth Speaker. Please read all instructions carefully
before using and retain this manual for future use and
reference.
PACKAGE CONTENTS
- Splash Block Bluetooth Stereo Speaker
- Micro USB Charging Cable
- Optional AUX Cable
- Operation Manual
KEY FEATURES
- Compatible with Bluetoothenabled devices
- Built—in rechargeable battery
- Built—in mic 8. onetouch answer button
- Media/volume control shortcuts
SAFETY INSTRUCTIONS
Keep the unit away from heat sources, direct sunlight,
humidity, water and any other liquids.
Do not operate the unit of it has been exposed to water,
moisture or any other liquids to prevent against electric
shock, explosion and/or injury to yourself and damage to
the unit.
Do not use the unit if it has been dropped or damaged in
any way.
Repairs to electrical equipment should only be
performed by a qualified electrician. Improper repairs
may place the user at serious risk.
Do not puncture or harm the exterior surface of the
product in any way.
Keep the unit free from dust. lint, etc.
Do not use this unit for anything other than its intended
use or purpose. Doing so may damage the device.
This product is not a toy. Keep out of reach of children.
Do not use the headset at excessive levels as this may
damage hearing.
Do not expose batteries, battery pack, or batteries to
installed to excessive heat, such as direct sunlight, or
open flame.
FEATURES
- Bluetooth wireless connection
- Media and volume shortcut controls
- Built—in rechargeable battery
NOTE: DO NOT SUBMERGE SPEAKER
KEYS
d) ,2" I« »I-+
POWER PLAV/ PAUSE REWIND / FORWARD VOLUME 7/
ON/OFF & ANSWER/END VOLUME - VOLUME 4»
CALLS
Press once to Press once to Press to
Press 8: Press to go to prev. go to next decrease or
hold to turn play/ pause track. hack. Increase
on/ofr. muslc. volume
Press 8r hold to respectively
turn on/off.
CHARGING THE SPEAKER
The speaker come with a built—in rechargeable battery.
Before using it for the first time, we recommend you
charge the battery fully. Only use the supplied USB cable
to charge the speaker.
Connect the USB cable to a computer USB port or a USB
wall charger and to the charging jack of the speaker. The
red LED light will illuminate while the speaker is charging.
A full charge of the battery takes around 3 hours. When
the battery is fully charged, the LED light will turns off.
Disconnect the speaker at this point. The speaker will then
be ready for use.
PAIRING THE SPEAKER
l . Ensure the speaker is turned off. If it is not, please tum off
the speaker first before pairing.
2. Press and hold the Power On/Off button for 5-7
seconds until the blue LED turns on. This will indicate your
speaker is now in pairing mode.
3. Place the speaker and the Bluetooth device to which
you would like to pair it within the operating distance. We
recommend keeping the two devices no further than 3
feet apart.
4. Ensure Bluetooth is enabled on your phone or music
device. Refer to the manufacturer‘s instructions for how
to enable Bluetooth on your device.
5. Once you have activated Bluetooth on your device,
select the earphones “HY—SPLH” from the list of available
Bluetooth devices.
6. Please note, pairing mode on the speaker will last for
two minutes. If no devices are paired after two minutes,
the speaker will automatically return to standby mode.
7. If pairing is unsuccessful, turn off the speaker first and
repair following the aforementioned steps. Once you
have paired the speaker with a device, the speaker will
remember this device and will pair automatically when
the device‘s Bluetooth is activated and in range. You do
not need to repair any previously connected devices.
If prompted, enter password or PIN Number ”0000."
CARE AND MAINTENANCE
- Do not expose the headset to liquid, moisture, or
humidity to avoid damage to the product's internal
circuitry.
- Do not use abrasive cleaning solvents to clean the unit.
- Do not expose the headset to extremely high or low
temperatures as this will shorten the life of the electronic
device, destroy the battery, and/or distort certain plastic
parts.
. Do not dispose of the earphones in fire as they may
explode or combust.
. Do not expose the headset to contact with sharp
objects as this will cause scratches and damage.
. Do not let the earphones fall from high places, as doing
so may damage the internal circuitry.
~ Do not attempt to disassemble the earphones.
SPECIFICATIONS
Bluetooth:
Supported Profiles:
Operating Distance:
Play Time:
Talk fime:
Frequency:
Battery:
Charging Input:
Charging fime:
Frequency Response:
Sensitivity:
Speaker Size:
Speaker Output:
Distortion:
Impedance:
V2.1 + EDR
A2DP Vi .2,
AVRCP Vi .3
GAVDP VI .2
Up to 33ft (10m)
I 50mins
Up to 8 Hours
2.4 GHz—2.480 GHz
3.7V I200mAh Lithium-Ion
DC 5V, iOOOmAh
~3 Hours
ISOHz—QOkHz
80dB
(1350mm
Two $Watt Speakers
510%
40
WARRANTY INFORMATION
The condition of this warranty and our responsibilities
under this warranty are as follows:
Supplier's warranty Is non-transferable. And this warranty Is
limited to the oflginal purchaser only.
‘ You must be able to prove the date of original purchase
of the unit with 0 dated receipt.
“ The warranty is not applicable if the product has been
subject to physical abuse, improper installation, modifica—
tion or repair by unauthorized third party.
' The responsibility of supplier's products shall be limited to
the repair of replacement of the product as its sole
discretion.
' Specifically exempt from any warranty are limited—life
consumable components subject to normal wear and
tear such as batteries, decorates and other accessones.
" A supplier will not take any responsibility it the failure of
the unit has resulted from accident, abuse, misuse. or any
unauthorized repair, modification or disassemble.
" Modification and repair of the unit should be done by
authorized and qualified service personnel, Center or
returned to the manufacturer.
" This warranty gives you specific legal rights, and you
may also have other rights which vary under local laws.
In the event that the speaker does not function property,
retum it to the store where it was purchased.
The following conditions comprise the requirements
and scope of our warranty conditions and do not
affect our legal and contractual warranty obligations.
We offer a warranty on our products in accordance
with the following conditions:
i) Hype® products are covered by a 12 month
warranty. We will resolve damages or defects on Hype®
products free of charge within 12 months of the
purchase date under the following warranty
conditions. For any damage or defect determined
later than 12 months after the purchase date, proof of
a manufacturing fault must be submitted for repair
under warranty.
2) The warranty does not cover batteries and other
parts, which are considered consumables, parts that
break easily such as glass or plastic or defects based
on normal wear and tear, There is no warranty
obligation in the event of marginal differences
compared to the target appearance and workman-
ship provided these have a negligible effect on the
product’s fitness for use, in the event of damage
caused by chemical or electrochemical effects, by
water or generally from abnormal conditions.
3) The warranty will be performed in such a way that
we shall decide whether to repair the defective parts
or to replace them with working parts free of charge.
Hype® reserves the right to exchange the product fora
replacement product of equal value if the product
sent in cannot be repaired within a reasonable time or
at a reasonable cost. Requests cannot be made for
repairs to be carried out on site. Parts that have been
replaced or exchanged become our property.
4) The warranty claim does not apply if repairs or other
work is carried out by unauthorized persons or if our
products are equipped with additional parts or
accessories that are not approved for our product.
5) Warranties that have been activated do not cause
the warranty period to be extended, nor do they
trigger a new warranty period. The warranty period for
any replacement parts installed ends w'rth the warranty
period for the entire product.
6) Any other further claims are excluded, especially
those for replacement due to damage caused to the
outside of the product, provided there is no obligatory
legal liability. We therefore accept no liability for
accidental, indirect or other consequential damage of
any kind, which leads to usage restrictions, data loss,
and loss of earnings or interruption to business.
Asserting a warranty claim:
1) To make use of the warranty service for hardware
issues, you must contact the Hype® Service Center by
email at support@dglusa.com
2) Hype® will try to diagnose and solve your problem. If
it is determined that a warranty claim exists, you will be
given an RMA number (Return Material Authorization)
and will be asked to send the product to Hype®.
IMPORTANT: Hype® will only accept parcels that have
an RMA number.
Please observe the following when sending the
product:
1) Send the product suitably packaged with carnage
and insurance paid. Do not enclose any accessories
with the product (cables, chargers, manuals, etc.)
unless the Hype® Service Center specifies otherwise.
2) Mark the RMA number on the outside of the
package in such a way that it is visible and clearly
legible.
3) You must enclose a copy of the sales slip as proof of
purchase.
4) Once Hype® has received the product, it will meet its
warranty obligations in accordance with the warranty
conditions and will return the product to the sender
with carriage and insurance paid.
Service outside of warranty
Hype® can refuse any service claim made that is not
covered by the warranty.
If Hype® agrees to provide a service outside the
warranty, the customer will be invoiced for all repair
and transport costs. Hype® will not accept any
packages that have not first been approved by Hype®
by means of an RMA (Return Material Authorization).
Contact us with questions or for support at:
support@dglusaucom
FCC STATEMENT
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications
not expressly approved by the party.
Responsible for compliance could void the user's authority
to operate this equipment. (Example- use only shielded
interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, i
ncluding interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF
exposure requirement. The device can be used in portable
exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2015:06:12 14:53+08:00
Create Date                     : 2015:05:27 14:25:37+08:00
Metadata Date                   : 2015:06:12 14:53+08:00
Format                          : application/pdf
Title                           : 
Creator                         : toby
Document ID                     : uuid:aab58d1d-3c99-4830-96af-fd96599bb9d3
Instance ID                     : uuid:02e352a2-ee7d-49d1-8a82-571eca8f3f8a
Has XFA                         : No
Page Count                      : 9
Author                          : toby

EXIF Metadata provided by EXIF.tools