TELEPHONE EST TWC01 wireless charger User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3808679
Application ID	KWVSlAWpUQ5L0o18ZLs4iQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.81kB (47592 bits)
Date Submitted	2018-04-08 00:00:00
Date Available	2018-04-08 00:00:00
Creation Date	2018-04-03 15:30:24
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2018-04-03 15:30:24
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Wireless charger
User Manual
Thanks for choosing us!
This is a smart phone wireless charger that allows you enjoy the fun
to digital products easily.
Please kindly read the user manual before using and keep it for future
reference.
Connect to Power Adapter
*Connect the power adapter to socket.
*Connect adapter to the USB 2.0 interface, the other micro USB to the
wireless charger.
Standby state: green LED light is on
Turn on: blue and green led light show on 2 seconds, then blue light extincted,
green light stay on
Charging: blue LED light flashing twice then start breath. when charging
finished all lights off
FOD: led light twinkling once a second until take foreign objects away
Full charging: when charging finished all lights off
Notes:
1.Do not squeeze or collied.
2.DO not disassemble or throw into fire or water, to avoid causing a
short circuit leakage.
3.Do not use wireless charger in severely hot, humid or corrosive
environments, to avoid circuit damage and occur leakage phenomenon.
4.Do not place too close with magnetic stripe or chip card ( ID
card, bank card, etc.) to avoid magnetic failure.
5.Please keep the distance at least 20cm between implantable medical
devices ( pacemakers, implantable cochlear, etc.) and the wireless
charger , to avoid potential interference with the medical device.
6.To take care of the children, to ensure that they won't pay the
wireless charger as a toy, to avoid unnecessary accidents.
7.Please keep the charger away from or other liquid.
8.If you need to clear the charger, please make sure it is not
connected power supply.
9.Using Environment temperature remains 0-35°
*Do not squeeze or collied.
*Do not disassemble or throw into fire or water, to avoid
The involved image are sketch maps, end-product subject to the abject
entity.
Includes: wireless charger, charge cable, user's manual.
*AC adapter is excluded, please buy separately or use the mobile phone
original adapter if need.
Specification
Output:5w（ＭＡＸ）
Charging Efficiency:≥75%
Charging Distance≤8mm
Applicable Devices
1.Fast charging：Samsung galaxy note 5 s7/s7 edge
s8+/s8
plus, Standard charging :Samsung galaxy s6/s6 edge plus, Nokia 1520,
Nexus 6 LG, and more.
2.Samsung Devices with reserved wireless charging interface ( not
included ) next to battery :Galaxy S3/S4/S5 Note 2/Note 3,ect.
3.Devices ( Android/ ios )with QI-enable charging receiver or receiver
case ( not included ).
Please note : All devices must conform to QI standard.
4.Iphone 8 and above all applicable!
Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications made to this device not expressly approved by
TELEPHONE EST (HK) CO., LTD may void the FCC authorization to operate this
device.
Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 2018:04:03 15:30:24+08:00
Modify Date                     : 2018:04:03 15:30:24+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : <545354575043303138CEDECFDFB3E4B5E7C6F7CBB5C3F7CAE92E747874202D20BCC7CAC2B1BE>
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:aa9d73d8-29d5-4a88-ba7b-a87787a01f82
Instance ID                     : uuid:2a853568-d514-4f92-b4be-7ca98489ce51
Page Count                      : 2

EXIF Metadata provided by EXIF.tools