TELEPHONE EST X3 Bluetooth speaker User Manual E keyway jade bony 5 14

TELEPHONE EST (HK) CO., LTD Bluetooth speaker E keyway jade bony 5 14

Users Manual

X3 User manual1、Safety Warning and Transportation SafetySafety Warning●For correct and safe use, please read the safety warning carefully and follow all theinstruction .●When forbidden using wireless device or device use would interrupt electronicdevice and safety potential , please turn off the power supply .●In flammable and explosive area, please turn off the power supply, and follow therelated instruction, so as not to cause explosion or fire. Flammable and explosivearea include but not limited in: gas station, fuel section (like: capsule under the shipdeck), flammable or heavy chemicals transport and store device, with explosivedanger mark area, area with the mark of "turn off the two‐way wireless electronicdevice"Transportation Safety●When flying on plane , please follow the rule of airline. Turn off the power supplybefore the taking off of plane, to avoid the potential risk。FCC Caution.This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.Any Changes or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate the equipmentNote: This equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits are designed toprovide reasonable protection against harmful interference in a residentialinstallation. This equipment generates uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does causeharmful interference to radio or television reception, which can be determined byturning the equipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:‐Reorient or relocate the receiving antenna.‐Increase the separation between the equipment and receiver.‐Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.NotesIt will heat slightly when charging or in normal operation, that's normal phenomenon.Please turn off the switch of power supply when cleaning the overall unit, and cut offthe outer connect.●Please take good care of the overall unit and its accessories ,and try to use in tidyenvironment. Don't let overall unit and its accessories to contact fire or lighting buttetc.●Try to keep the product and its accessories dry. Don't contact water or moisture.●Please don't fall off, throw or tread.●Please don't use antistatic soft cloth to clean the overall unit. Don't use chemicals(like alcohol, benzene etc) chemical washing or frosted cleaning detergent.●Please don't put the overall unit and its accessories to too cold or too hot area.●Please use our company's authorized accessories .●Please don't tear down the overall unit, or you could not have the free guaranteeservice of our company.1. Buttons and interface description2. Bluetooth phone call button, status indicator light3. Volume selection, power switch4. Micro usb port, charge port, line in port5. Charge indicator light1. system connection figure2. PlaymusicontheBluetoothdevice3. Noted: the effective working range between the Bluetooth and M1 is about 10 meters (30feet)4. Slide switch ④to select the Bluetooth audio source, and then the blue statusindicator light flashes.5. Turn on Bluetooth on the device.6. Select X3 on the device to pair, when the speaker has “bi” sound and the bluestatus indicator light growly flashes, which means the pairing is successful and itis on the status of standby. For some devices, you have to enter "0000" as thepin code.7. PlaymusicontheBluetoothdevice.5、Using X3 DialingWhen calls:●Press the Bluetooth button to answer the phone●The direction light shines every second in calls●Redial the bluetooth button to hang off※You could speak directly to the Microphone, to get the best call effect !
●In calls press the button of " Speaking key" twice to transfer to mobile to answer .Voice dial directionAfter matching successfully, press twice of the "speaking key" to start the voice dialfunction of IPHONE, could dial calls, play music.Call back the last call:On standby, press the "speaking key" for about 2 seconds, then could call the finalcall in our mobile phone!6、Connect the external device player1、Slip switch④to AUX to choose the voice source of AUX in . The direction lightturns to red.2、By the ISDN electronic‐wire attached MOMI, would connect the outer device ofM1.3、Play music on your devise, X3 could magnify your public address7. Technical Specifications(Note: If the Product Information changes, will inform)Compability:Most Bluetooth Smartphone , Tablet computer, Sound EquipmentiPad, iPad1, iPad2, iPad3, iPad4, ipad mini;iPhone; iPhone3 or more advanced Part Number ;iPod Touch : Third‐generation , or more advancedAndroid tablet computer and smartphone .Android 2.1 and Bluetooth2.1 or more advanced versions compatible;Other sound equipment: With Bluetooth2.1 or more advanced versions .Junction:Bluetooth model: HFP，A2DP v1.2；Bluetooth scope: Sight, 10 meters or 30 inches ;Microphone: built‐in microphoneUSB Charging: YESMessage input (3.5 mm): YESOutput power (RMS): 1.5 WSound system: Single TrackVoice box: 2.0 inchSpeaker Drive: Supermagnet SystemBattery type: Lithium battery(built‐in) 650mAhBattery supporting Play Duration: About 8 hoursAccessories:Cable used for: 35mm message input and USB charging
8、Common malfunction and exclusionNo power on●Low battery , please charge for your X3No sound●Adjust the volume of mobile phone or Personal Computer.●Make sure your Bluetooth Terminal are in effective Receiving Range .●Check whether the switch is at the right tap position of sound source .AccessoryX3 speaker, Micro usb cable, warranty card, Certificate of Approval

Navigation menu