TENDA TECHNOLOGY 4G301 Wireless N300 3G/4G Router User Manual Part 1

SHENZHEN TENDA TECHNOLOGY CO., LTD. Wireless N300 3G/4G Router Part 1

Contents

User Manual Part 1

                                                   3G/4G Wireless Router User Guide    I
                                                   3G/4G Wireless Router User Guide    I Copyright Statement   is  the  registered  trademark  of  Shenzhen  Tenda  Technology  Co.,  Ltd.  All  the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com.  Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions  or  changes.  Tenda  does  not  assume  any  liability  that  may  occur  due  to  the  use  or application of the product or circuit layout(s) described herein. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information and recommendations in this document do not  constitute the warranty of any kind, express or implied.
                                                   3G/4G Wireless Router User Guide    II Preface Thank you for choosing Tenda ! Please read this user guide before you start! This user guide instructs you to install and configure your device. This user guide applies to 4G300, 4G301 and 4G302. The 4G301 is used as an example throughout this user guide. This user guide uses the following formats to highlight special messages: Icon Description Note This format is  used to highlight information of importance or special interest.  Ignoring  this  type  of  note  may  result  in  ineffective configurations, loss of data or damage to device. Tip This  format  is  used  to  highlight  a  procedure  that  will  save  time  or resources.  Knowledge Center Description of fields on the device GUI. Technical Support   Website: http://www.tendacn.com   Email:    support02@tenda.com.cn   Skype:    tendasz   YouTube:    Tendasz1999   Hotline:   1-800-570-5892 (USA)              (061) 1300787922 (Australia)     (044)197-780-6119 (UK)            (0852)36120883 (Hong Kong)   (064) 800787922 (New Zealand)
                                                   3G/4G Wireless Router User Guide    III Table of Contents Copyright Statement........................................................................................................................................... I Disclaimer ............................................................................................................................................................. I Preface ................................................................................................................................................................. II This user guide uses the following formats to highlight special messages: ......................................................... II Technical Support ................................................................................................................................................ II Table of Contents ............................................................................................................................................. III I Product Overview ............................................................................................................................................ 1 1 Package Contents.............................................................................................................................................. 1 2 Getting to know your router ............................................................................................................................. 1 2.1 LED ............................................................................................................................................................ 1 2.2 Button & Interface ..................................................................................................................................... 3 2.3 Label .......................................................................................................................................................... 2 II Quick Internet Setup ...................................................................................................................................... 3 1 Getting Prepared ............................................................................................................................................... 3 2. Hardware Install .............................................................................................................................................. 4 2.1 Charging Router ......................................................................................................................................... 4 2.2. Hardware Install ........................................................................................................................................ 4 3 Connect to Router ............................................................................................................................................. 7 3.1 Connect to Device Wirelessly .................................................................................................................... 7 3.2 Connect to Device Using an Ethernet Cable ............................................................................................ 12 4 Smart Mode (Auto-switch between 3GRouter and Wireless Router Mode) ................................................... 12 5 Manual Internet Setup .................................................................................................................................... 13 5.1 Web Login ................................................................................................................................................ 13 5.2 Manual Internet Setup& Wireless Security Setup .................................................................................... 15 III Features & Configurations ........................................................................................................................ 25 1 Status .............................................................................................................................................................. 25 1.1 WAN Status .............................................................................................................................................. 26 1.2 LAN Status............................................................................................................................................... 27 1.3 Wireless Status ......................................................................................................................................... 27 1.4 System Status ........................................................................................................................................... 28 2 Basic Settings ................................................................................................................................................. 28 2.1 LAN Settings ........................................................................................................................................... 29 2.2 WAN Settings........................................................................................................................................... 30 2.3 WAN Speed .............................................................................................................................................. 36 2.4 DNS Settings ............................................................................................................................................ 37 2.5 MAC Clone .............................................................................................................................................. 38
                                                   3G/4G Wireless Router User Guide    IV 2.6. DHCP ...................................................................................................................................................... 39 2.7 DHCP Client List ..................................................................................................................................... 40 3 Wireless Settings ............................................................................................................................................ 42 3.1 Wireless-Basic ......................................................................................................................................... 42 3.2 Wireless Security ..................................................................................................................................... 44 3.3 Access Control ......................................................................................................................................... 45 3.4 Connection Status .................................................................................................................................... 47 4 Security ........................................................................................................................................................... 47 4.1 Client Filter .............................................................................................................................................. 48 4.2 MAC Filter ............................................................................................................................................... 51 4.3 URL Filter ................................................................................................................................................ 54 4.4 Remote Web Management ....................................................................................................................... 56 5 Advanced Applications ................................................................................................................................... 58 5.1 DDNS ...................................................................................................................................................... 58 5.2 Port Forwarding ....................................................................................................................................... 60 5.3 DMZ Host ................................................................................................................................................ 63 5.4 UPNP ....................................................................................................................................................... 64 5.5 Route Table .............................................................................................................................................. 65 6 Bandwidth Control ......................................................................................................................................... 65 7 Tools ............................................................................................................................................................... 67 7.1 Time& Date .............................................................................................................................................. 67 7.2 Firmware Upgrade ................................................................................................................................... 69 7.3 Backup & Restore .................................................................................................................................... 71 7.4 Restore to Factory Default Settings ......................................................................................................... 74 7.5 Change Password ..................................................................................................................................... 75 7.6 Logs ......................................................................................................................................................... 76 7.7 Reboot ...................................................................................................................................................... 76 IV Appendix ........................................................................................................................................................ 77 1 Configure PC TCP/IP Settings ....................................................................................................................... 77 Windows 7 ..................................................................................................................................................... 77 Windows XP .................................................................................................................................................. 83 2 FAQs ............................................................................................................................................................... 86 3 Factory Default Settings ................................................................................................................................. 87 4 Remove Wireless Network from Your PC ...................................................................................................... 88 Windows 7 ..................................................................................................................................................... 88 Windows XP .................................................................................................................................................. 90 5 Safety and Emission Statement ...................................................................................................................... 92
                                                           I Product Overview         1 I Product Overview 1 Package Contents Unpack the package. Your box should contain the following items:    If any of the parts are incorrect, missing, or damaged, contact your Tenda dealer. Keep the carton, including the original packing materials, in case you need to return the product for repair. 2 Getting to know your router 2.1 LED 4G300
                                                           I Product Overview         2  LED Status Description Battery Meter   Red The  amount  of  electrical  energy  capacity  is  less  than 20% Light Green The amount of electrical energy capacity is more than 20% Dark Green The device is charging Blue The unit is fully charged up  4G301  LED Status Description Battery Meter   Red The power level is very low Green Display real-time level of power capacity System LED Blinking The unit is starting up Solid The unit is functioning correctly 4G302
                                                           I Product Overview         3  LED Status Description Battery Meter Red The power level is very low Green Display real-time level of power capacity System LED Blinking The unit is starting up Solid The unit is functioning correctly  2.2 Button & Interface 4G300
                                                           I Product Overview         4  Button/Interface Description Micro USB For charging the unit via a USB cable USB For  connecting  to  a  3G/4G  Modem  or  charging  a  terminal  device (such as iPad, iPhone) ON/OFF Switch Power button to turn the unit on or off. The unit functions as a 3G/4G wireless router when turned on or a power bank when turned off Reset Pressing it with a needle for about 10 seconds resets the unit to the factory defaults RJ45 Functions as a LAN port for connecting to a PC or switch in 3G/4G router mode and WISP mode. In other modes, this port functions as a WAN port for connecting to ISP
                                                           I Product Overview         1 4G301  Button/Interface Description Micro USB Port For charging the unit via a USB cable USB For  connecting  to  a  3G/4G Modem  or  charging a  terminal  device (such as iPad, iPhone) ON/OFF Switch Power button to turn the unit on or off. The unit functions as a 3G/4G wireless router when turned on or a power bank when turned off Battery Meter Press it to view power level Reset Pressing it with a needle for about 10 seconds resets the unit to the factory defaults RJ45 Functions as a LAN port for connecting to a PC or switch in 3G/4G router mode and WISP mode. In other modes, this port functions as a WAN port for connecting to ISP
                                                           I Product Overview         1 4G302   Button/Interface Description Micro USB For charging the unit via a USB cable USB For connecting to a 3G/4G Modem or  charging a terminal device (such as iPad, iPhone) ON/OFF Switch Power button to turn the unit on or off. The unit functions as a 3G/4G wireless router when turned on or a power bank when turned off Battery Meter Press it to view power level Reset Pressing it with a needle for about 10 seconds resets the unit to the factory defaults RJ45 Functions as a LAN port for connecting to a PC or switch in 3G/4G router mode and WISP mode. In other modes, this port functions as a WAN port for connecting to ISP
                                                           I Product Overview         2 2.3 Label   1→Product Model 2→Default Login IP address. This IP address is to be used to access the router’s settings through a web browser. If you change it, you have to open a new connection to the new IP address and log in again. 3→Default login password 4→Default wireless network name (SSID).
                                                       II Quick Internet Setup         3 II Quick Internet Setup 1 Getting Prepared Before you start the installation process, you need to prepare the following: Item Description Router Find it in your package PC Should have a installed IE8 or higher browser Gather  ISP Information  DHCP, PPPoE or Static IP Internet Connection Type: 1. Ethernet Cable from the incoming Internet side: This is provided by your ISP 2.  ISP  Information:  Your  Internet  service  provider  (ISP)  should  have provided you with all of the information needed to connect to the Internet. If you cannot locate this information, ask your ISP to provide it If your ISP uses  a  PPPoE Internet connection, you will  need ISP login name and password   If you use a DHCP Internet connection, no information is needed   If  your  ISP  gives  you  a  fixed  or  static  IP  address  for  Internet connection, you will need to gather the following information: 1) IP Address 2) Subnet Mask 3) Gateway 4) DNS Server 5) Alternate DNS Server (Optional) 3G/4G Internet Connection: 1.  3G/4G  Modem:  For  3G/4G  Internet  connection,  you  need  to  buy  a 3G/4G modem 2.  3G/4G  ISP  Information:  Your  Internet  service  provider  (ISP)  should have provided you with  all of the information needed to connect to the Internet. If you cannot locate this information, ask your ISP to provide it 3.  Ethernet  Cable:  This can  be  found in  the product package. You  will need it to connect your PC to this device WISP Internet Access: 1.  Remote  AP's  SSID,  MAC  address,  security  mode,  cipher  type  and security key 2. Internet connection information provided by the remote AP 3.  Ethernet  Cable:  This can  be  found in  the product package. You  will need it to connect your PC to this device
                                                       II Quick Internet Setup         4 2. Hardware Install 2.1 Charging Router Turn on the router and check the power level indicator LED. (For LED description, see LED) It is advisable to fully charge up the device if the amount of electrical energy capacity is less than 20%.   Charge Method:  Note---------------------------------------------------------------------------------------------------------------------- Please use the USB cable that comes in the package to charge this device. Using a different USB cable might cause damage to this device. 2.2. Hardware Install Select a hardware install method according to your environment. A. If you access Internet by connecting to the Ethernet cable from the incoming Internet side, see DHCP, PPPoE & Static IP to install hardware. B. If you access Internet via a 3G or 4G modem, see 3G Router Mode to install hardware. C. If you acquire Internet access from your WISP AP or a wireless Access Point on an existing network see WISP Mode to install hardware. DHCP, PPPoE & Static IP In this mode, the RJ-45 port on this device functions as a WAN port. You must connect to this device wirelessly.
                                                       II Quick Internet Setup         5  Tip----------------------------------------------------------------------------------------------------------------------------------------- If you want to access and configure this device via a wired connection, simply attach a 3G modem to its USB port and system will automatically switch to the 3G Router mode. The RJ45 port will then function as a LAN port so that you can connect to it using an Ethernet cable. Set up Internet connection and secure your wireless network and then reconnect to this device. 3G/4G Router Mode In this mode, the RJ-45 port  on  this device functions as a WAN port. You can connect to this device using an Ethernet cable.
                                                       II Quick Internet Setup         6
                                                       II Quick Internet Setup         7 WISP Mode In this mode, the RJ-45 port  on  this device functions as a WAN port. You can connect to this device using an Ethernet cable.  3 Connect to Router In the Wireless Router (DHCP, PPPoE, Static IP) mode, clients (such as computers, smart phones and tablets) can only connect to this device wirelessly for sharing Internet access. In the WISP mode or 3G Router mode, computers, smart phones and tablets can access and connect to this device either wirelessly or using an Ethernet cable. 3.1 Connect to Device Wirelessly Tip------------------------------------------------------------------------------------------------------------------------ 1.  The device's SSID is "Tenda_xxxxxx" by default (You can find it on the attached label). 2.  If you secure your wireless network, you must use the security key to join it. 3.  To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one.
                                                       II Quick Internet Setup         8 Windows 7 ① Click the icon    on the notification area on the bottom right corner.   ② Select the wireless network you wish to connect and click Connect.
                                                       II Quick Internet Setup         9 ③ If you see the screen below, you are connecting to the wireless network.    ④ Enter the security key and click OK.    When  you  see  Connected  displayed  next  to  the  wireless  network  you  selected,  you  have connected to the wireless network successfully.
                                                       II Quick Internet Setup         10 Windows XP ① Right click My Network Places from your PC's desktop and select Properties.  ② Right  click  Wireless  Network  Connection  and  select  View  Available  Wireless Networks.
                                                       II Quick Internet Setup         11 ③ Double click the wireless network you wish to connect.  ④ Enter the security key and click Connect.
                                                       II Quick Internet Setup         12 ⑤ When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully.  3.2 Connect to Device Using an Ethernet Cable If your computer is set to a static or fixed IP address (this is uncommon), change it to "Obtain an IP address automatically" and "Obtain DNS server address automatically" from the device. 4 Smart Mode (Auto-switch between 3GRouter and Wireless Router Mode) The device is preset to operate in the smart mode by default.   Depending on whether there is an available 3G modem, system automatically switches to   a) 3G Router mode (in the presence of a 3G modem); clients can share Internet access either through  a  wireless  or  wired  connection  to  the  device.  There  is  no  need  for  additional configurations!   or b) Wireless Router mode (in the absence of a 3G modem): in the wireless router mode
                                                       II Quick Internet Setup         13 and automatically detects and switches between PPPoE and DHCP. If you use the DHCP (Dynamic IP) connection type, you can simply access Internet via a wireless connection to this device, or if you use PPPoE, access this device wirelessly and then set up Internet. See PPPoE. When  you  first  time  open  a  web  page  after  successfully  connecting  to  Internet,  you  will  be prompted to customize a wireless security key to secure your wireless network. Simply follow the onscreen instructions there. Tip------------------------------------------------------------------------------------------------------------------------- This device can automatically detect and switch among the DHCP, PPPoE and 3G router mode depending  on  the  actual  environment.  If  the  Auto-switch  feature  is  disabled,  the  device  will automatically  detect  and  switch  to  the  right  Internet  connection  type  in  case  of  an  Internet connection failure. 5 Manual Internet Setup Read this section only when you fail to access Internet after you have tried the above mentioned steps or  you can  access  Internet and  want to  change  the SSID (wireless network name) and security key of this device.   5.1 Web Login ① Launch a web browser, say, IE.   ② In the address bar, input 192.168.2.1, and press "Enter".
                                                       II Quick Internet Setup         14 ③ Enter the login password and click Login. The default password is admin.   ④ You will come to the setup wizard interface.    Here you can quickly set up Internet.    Tip------------------------------------------------------------------------------------------------------------------------------------------- 1.  If you access Internet by connecting to the Ethernet cable from the incoming Internet side, see Static IP. 2.  If you don't want to use the Auto-switch feature, check the Disable Auto-switch mode box. 3.  You can also enable the Auto-switch mode feature after you manually set up Internet and your wireless network so that your router can fit different environment, eliminating manual intervention.
                                                       II Quick Internet Setup         15 5.2 Manual Internet Setup& Wireless Security Setup Read  the  following  and  determine  your  Internet  connection  type.  Then  follow  the  right  setup wizard. A. If your ISP provides you with an Ethernet cable from the incoming Internet side but no ISP login account or IP information, your ISP uses a DHCP connection. See DHCP. B. If your ISP provides you with an Ethernet cable from the incoming Internet side and ISP login account, your ISP uses a PPPoE connection. See PPPoE. C. If your ISP provides you with an Ethernet cable from the incoming Internet side IP information (IP address, subnet mask, gateway IP address, DNS server address), your ISP uses a static IP connection. See Static IP. D. If you access Internet via a 3G or 4G modem, see 3G/4G Router Mode. E. If you acquire Internet access from your WISP AP or a wireless Access Point on an existing network, see WISP Mode.
                                                       II Quick Internet Setup         16 DHCP ① Select Hotel Mode: Dynamic IP and click Next.  ② Configure your wireless network: SSID, channel, security settings and then click Next. SSID:Tenda_762038 Channel: 6 Security Mode: WPA-PSK               Cipher Type: AES               Security Key: Myrouter
                                                       II Quick Internet Setup         17 ③ MAC Clone Setup: Enter the computer or broadband modem authorized by your ISP. Then click Next.  ④ Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly and you will be able to access Internet.  Tip------------------------------------------------------------------------------------------------------------------------- Upon successful configuration, the RJ-45 port on the device functions as a WAN port and clients must only access the device wirelessly.
                                                       II Quick Internet Setup         18 PPPoE ① Select Residence Mode: PPPoE and click Next.  ② Configure your wireless network: SSID, channel, security settings and then click Next. SSID:Tenda_762038 Channel: 6 Security Mode: WPA-PSK             Cipher Type: AES           Security Key: Myrouter
                                                       II Quick Internet Setup         19 ③ Internet Setup & MAC Clone: Enter your ISP login user name and password (case sensitive) and the MAC address of the computer or broadband modem authorized by your ISP. Then click Next.  ④ Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly and you will be able to access Internet.  Tip------------------------------------------------------------------------------------------------------------------------- Upon successful configuration, the RJ-45 port on the device functions as a WAN port and clients must only access the device wirelessly.
                                                       II Quick Internet Setup         20 3G/4G Router Mode Tip------------------------------------------------------------------------------------------------------------------------- In this mode, you only need to configure the router. No additional configurations are required on the 3G/4G modem. ① Select 3G/4G Router Mode and click Next.  ② Select your 3G ISP and click Next.
                                                       II Quick Internet Setup         21 ③ Configure your wireless network: SSID, channel, security settings and then click Next. SSID:Tenda_762038 Channel: 6 Security Mode: WPA-PSK             Cipher Type: AES           Security Key: Myrouter  ④ Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly or using an Ethernet cable and you will be able to access Internet.   Tip------------------------------------------------------------------------------------------------------------------------- Upon successful configuration, the RJ-45 port on the device functions as a LAN port and clients can access the device either wirelessly or via a wired connection.
                                                       II Quick Internet Setup         22  WISP ① Select WISP Mode: WISP and click Next.  ② WISP Setup: Enter or specify the SSID, MAC, channel, security settings provided by your WISP and then click Next.
                                                       II Quick Internet Setup         23 ③ Configure your wireless network: SSID and security settings and then click Next. SSID:Tenda_762038 Security Mode: WPA-PSK             Cipher Type: AES           Security Key: Myrouter  Tip------------------------------------------------------------------------------------------------------------------------------------------- In WISP mode, your wireless network must be set to operate on the same channel as your WISP AP. ④ Internet Setup:    Configure the Internet connection settings and then click Next. If you are unsure, consult your WISP.
                                                       II Quick Internet Setup         24 ⑤ Click Finish and wait for the device to restart automatically. After reboot, reconnect to this device wirelessly or using an Ethernet cable and you will be able to access Internet.  Tip------------------------------------------------------------------------------------------------------------------------- Upon successful configuration, the RJ-45 port on the device functions as a LAN port and clients can access the device either wirelessly or via a wired connection.
                                                       III Features & Configurations           25 III Features & Configurations 1 Status This section includes the following:   WAN Status LAN Status Wireless Status System Status   Click Status to enter the page.
                                                       III Features & Configurations           26 1.1 WAN Status WAN Status in Wireless Router Mode & WISP Mode (WISP Client Router Mode):  WAN Status in 3G/4G Router Mode:    Tip-------------------------------------------------------------------------------------------------------------------------------------------- IP  Address/Subnet  Mask/WAN  subnet  mask/Gateway/Primary  DNS  Server/Secondary  DNS Server: This type of information appears only if the router successfully connects to Internet via a PPPoE or DHCP (dynamic IP) connection. However if you connect the router to Internet with static IP settings provided by your ISP, these fields will display the settings you entered whether the router successfully connects to the Internet or not. If nothing appears in the secondary DNS server field, there is no available secondary DNS server.
                                                       III Features & Configurations           27 1.2 LAN Status  1.3 Wireless Status
                                                       III Features & Configurations           28 1.4 System Status  Knowledge Center ---------------------------------------------------------------------------------------------- 1.    WAN MAC Address: The device’s current WAN MAC address. 2. System Time: Current system time on this device. The device automatically synchronizes the system time with Internet time servers. 3.    Up Time: Displays the time duration indicating how long the router has been up since startup. Up time is recounted and renewed upon poweroff. 4.    Connected Clients: Displays the number of DHCP clients. 2 Basic Settings This section includes the following: LAN Setup WAN Setup WAN Speed DNS Settings MAC Clone DHCP Server DHCP Client List   To change the device's login IP address, see LAN Setup.
                                                       III Features & Configurations           29   To set up Internet, see WAN Setup.   To set up speed and duplex mode for the WAN port, see WAN Speed Setup.   To configure DNS server, see DNS Setup.   To clone MAC address, see MAC Clone.   To configure DHCP server, see DHCP Server.   To assign static IP addresses and view LAN device information, see DHCP Client List.       2.1 LAN Settings Here you can configure the LAN IP Address and Subnet Mask. This IP address is to be used to access the device’s settings through a web browser. Be sure to make a note of any changes you apply to this page.   Tip------------------------------------------------------------------------------------------------------------------------------------------- 1.Default IP address and subnet mask are respectively 192.168.2.1 and 255.255.255.0. 2. Be sure to make a note of any changes you apply to this page. If you change the LAN IP address of the router, you have to open a new connection to the new IP address and log in again. Also, you have to set the default gateway addresses of all LAN PCs to this new IP address. 3. The router's LAN IP address and WAN IP address cannot be on the same IP segment. If not, the router will not be able to access Internet.  Configuration Procedures: ① Change the IP address to the one you wish to use, for example, 192.168.10.1. ② Click Save to save your settings.
                                                       III Features & Configurations           30 2.2 WAN Settings Click Basic -> WAN Setup to configure your Internet connection settings.   3G/4G Router Mode  Configuration Procedures: ① Country: Select your country. ② Service Provider: Select your 3G/4G ISP. ③ User Name/Password: Enter the user name and password for 3G/4G Internet service. ④ Click Save.   Knowledge Center ---------------------------------------------------------------------------------------------- Connect  Automatically:  Connect  automatically  to  the  Internet  after  rebooting  the  system  or connection failure.
                                                       III Features & Configurations           31 Connect Manually: Require the user to manually connect to the Internet before each session. Connect  On  Demand: Re-establish  connection  to  the  Internet  only  when  there  is  data transmitting. Connect During Specified Time Period: Connect automatically to the Internet during a specified time length.  Wireless Router & WISP Client Router Mode A. Select PPPoE if your ISP uses a PPPoE connection and gives you a PPPoE user name and a PPPoE password. B. Select  Static  IP  if  your  ISP  provides  you  with  fixed  or  static  IP  address  settings  (special deployment by ISP; this is rare). C.Select  DHCP  (Dynamic  IP)  if  you  can  access  Internet  simply  by  directly  connecting  your computer to an Internet-enabled ADSL/Cable modem without configuring any settings.
                                                       III Features & Configurations           32 PPPoE  Configuration Procedures: ① Internet Connection Type: Select PPPoE. ② ISP Username: Enter the ISP login name. ③ ISP Password: Enter the ISP login password. ④ Click Save to save your settings. Knowledge Center ---------------------------------------------------------------------------------------------- 1.  MTU:  The  MTU  (maximum  transmission  unit)  is  the  largest  data  packet  a  network  device transmits. The normal MTU value for most Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. For more information, see WAN MTU Setup. 2.    Service Name: This is the descriptive name of the current connection.    Only enter it if your ISP provides it.
                                                       III Features & Configurations           33 3.    Server Name: This is the descriptive name of the server. Only enter it if your ISP provides it.  Static IP  Configuration Procedures: ① Internet Connection Type: Select Static IP. ② IP  Address/Subnet Mask/WAN subnet  mask/Gateway/Primary DNS Server/Secondary DNS Server: Enter the ISP information you gathered in 1GettingPrepared. ③ Click Save to save your settings.
                                                       III Features & Configurations           34 DHCP  Configuration Procedures: ① Internet Connection Type: Select DHCP. ② Click Save to save your settings. WAN MTU Setup The MTU (maximum transmission unit) is the largest data packet a network device transmits. The normal  MTU  value  for  most  Ethernet  networks  is  1500  bytes,  or  1492  bytes  for  PPPoE connections. For some ISPs, you might need to change the MTU. This is rarely required, and should  not  be  done  unless  you  are  sure  it  is  necessary  for  your  ISP  connection.  When  one network device communicates across the Internet with another, the data packets travel through many devices along the way. If a device in the data path has a smaller MTU value than the other devices, the data packets have to be "fragmented" to accommodate the device with the smallest MTU value. The best MTU value is often just the factory default value. In some situations, changing the MTU value fixes  one problem but  causes  another.  Leave the  MTU unchanged unless one  of  these situations occurs: A. You have problems connecting to your ISP or other Internet service, and either your ISP or our technical support suggests changing the MTU value. Below web-based applications might require an MTU change:
                                                       III Features & Configurations           35   A secure website that does not open, or displays only part of a web page   Yahoo email   MSN portal B. You use VPN and encounter serious performance problems. C. You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. If you suspect an MTU problem, try changing the MTU to 1400. If this does not help, gradually reduce the MTU from the maximum value of 1500 until the problem disappears.
                                                       III Features & Configurations           36 The common MTU sizes and applications are listed in the table below. MTU Application 1500 Typical for connections that do not use PPPoE or VPN. 1492 Used in PPPoE environments. 1472 Maximum  size  to  use  for  pinging.  (Larger  packets  are fragmented.) 1468 Used in some DHCP environments. 1436 Used in PPTP environments or with VPN. Note --------------------------------------------------------------------------------------------------------------------- A wrong/improper MTU value may cause Internet communication problems. For example, you may be unable to access certain websites, frames within websites, secure login pages, or FTP or POP servers. 2.3 WAN Speed Click Basic -> WAN Speed to the configuration interface. Here you can configure the WAN speed and duplex mode.  Tip-------------------------------------------------------------------------------------------------------------------------------------------- 1. The router operates in "Auto-negotiation" (or Auto) mode by default. Usually, it works for most cases. In some situations, you might need to change the port mode. For example, if the cable connected to your router's WAN port is  longer than 100m, you may  need  to  use  10M  full-duplex or  10M half-duplex for better performance. Ensure that your router's WAN port operates with the same speed and duplex mode as the remote link partner. If not, your router's WAN port may not receive and send data.
                                                       III Features & Configurations           37 2.4 DNS Settings Click Basic -> DNS Settings to enter the DNS configuration interface.  Configuration Procedures: ① DNS Settings: Check to enable the DNS settings. ② Primary DNS Server: Enter the IP address of your ISP’s primary DNS server. ③ Secondary DNS Address: If a secondary DNS server address is available, enter it here. This field is optional. ④ Click Save to save your settings. Note --------------------------------------------------------------------------------------------------------------------- The default DNS settings are recommended. Only change the DNS default settings if you know that your ISP requires specific servers. If incorrect DNS settings are configured, webpages will be unable to open.
                                                       III Features & Configurations           38 2.5 MAC Clone Some ISPs (Internet Service Providers) require end-user's MAC address to access their network. This feature copies your current PC's MAC address to the router. Click Basic -> MAC Clone to enter the MAC Clone screen.  Knowledge Cente------------------------------------------------------------------------------------------------ 1. Restore Default MAC: Reset the router’s WAN MAC to factory default. 2. Clone MAC: Clicking this button copies the MAC address of the computer that you are now using to the router. Also, you can manually enter the MAC address that you want to use. You have to use the computer whose MAC address is allowed by your ISP. To restore default MAC address: ① Click Restore Default MAC. ② Click Save to save your settings. To clone the MAC address of the computer that you are now using to the router: ① Click Clone MAC. ② Click Save to save your settings. To manually enter the MAC address allowed by your ISP: ① Enter the MAC address allowed by your ISP.
                                                       III Features & Configurations           39 ② Click Save to save your settings. 2.6. DHCP DHCP  (Dynamic  Host  Configuration  Protocol)  assigns  an  IP  address  to  each  device  on  the LAN/private network. When you  enable  the  DHCP Server, the  DHCP Server will  automatically allocate an unused IP address from the IP address pool specified in this screen to the requesting device as long as the device is set to "Obtain an IP Address Automatically". If you disable this feature, you have to manually configure the TCP/IP settings for all PCs on your LAN to access Internet. Click Basic -> DHCP Server to enter the DHCP Server screen. Here you can change the DHCP IP address pool and lease time.  Configuration Procedures: ① DHCP Server: Select whether to enable or disable the DHCP server feature. ② Start IP/End IP: You can specify the starting and ending address of the IP address pool here.  These  addresses  should  be  part  of  the  same  IP  address  subnet  as  the  router’s  LAN  IP address.
                                                       III Features & Configurations           40 ③ Lease Time: The lease time is a time length that the IP address is assigned to each device before it is refreshed. ④ Click Save to save your settings. Tip-------------------------------------------------------------------------------------------------------------------------------------------- By default, the router functions as a DHCP server. Do not disable the DHCP server feature unless you want to manually configure the TCP/IP settings for all PCs on your LAN. 1.  Lease  time  will  be  renewed  automatically  upon  expiry.  No  additional  configurations  are needed. 2.  If you are not an advanced user, the default DHCP server settings are recommended. 2.7 DHCP Client List Click Basic -> DHCP Client List. Here you can view the DHCP dynamic client list, which includes host name, IP address, MAC address, and lease time information.  Tip--------------------------------------------------------------------------------------------------------------------------------------------- You can know whether there are unauthorized accesses by viewing the client list. Also, you can specify a reserved IP address for a PC in the LAN. That PC will always receive the same IP address each time when it accesses the DHCP server. Reserved IP addresses could be assigned to servers that require permanent IP settings. Static Assignment Application Example: To have a PC at the MAC address of 44:37:E6:4F:37:3B always receive the same IP address of

Navigation menu