TENDA TECHNOLOGY A18 Dual Band WiFi Repeater User Manual A18V1 0 TDE01 03

Download:
Mirror Download [FCC.gov]
Document ID	3662205
Application ID	44bfzfPf9CrDpOV6uJ6+Ug==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	391.42kB (4892794 bits)
Date Submitted	2017-12-04 00:00:00
Date Available	2017-12-04 00:00:00
Creation Date	2017-11-20 11:18:44
Producing Software	Corel PDF Engine Version 15.2.0.686
Document Lastmod	2017-12-04 09:56:16
Document Title	A18V1.0-TDE01安装指南03曲
Document Creator	CorelDRAW X5
Document Author:	user

Tenda
Quick Installation Guide
AC1200 Dual Band WiFi Repeater
AC750 Dual Band WiFi Repearter
ModeleiS, A15
LED Descriptions
Solid on The repeater has started, “
pwn LED Blinking The repeateris starting.
Off The repeateris not powered on,
On AWPs connection has been established.
WPS LED Blinking AWPS connection is being established,
off The wps function is disabled.
fittest!zzziiiffszissif’“'“WWW“
Signal LED Sam M The repeater is too faraway from the router.
Relocate the repeater closer to the router.
\ off The repeater does not connect to yourWiFi route )
Method 1: Extending Your WiFi Network Using Web UI
0 Power on the Repeater
Plug the repeater into a poweroutiet
near the router in the same room.
Wait until the PWR LEDturns Solid blue.
9 Extend Your Wifi Network
1 . Connect your WiFi device to the repeaters
3 Select a WiFi network (SSiD) you want to
WiFi network TendanT. extend.
a WMN () seiecrawmnerwarkyouwanrro
extend
TendagExT 55 My home wit. a e
Ensure that the Mobile Data (if anyi
function ofyourWiFi device is disabled.
2. Start a web browser, enter re.tenda.cn or
1 92.1 53.0354 in the address bar (0 Iogin.
Create a login password for later attempts
(recommend).
m serenade
4 Enterthe password ofthe WiFi network
you want to extend.
Vuur exisiino lMFl network
rnrei the password or-Mycianewn-
<9
re.tenda.cn
C TheexiendedWlFlnelwafk
Password is n characralslw
connrm m
sack
not Now
ssio
vv7name7win7sccxr
vassword otrne extended rework is
srmrasyouiexisi navni ineiwoik
Wait a moment, the Extended suuess'ull
page appears.
a Relocate the Repeater
1. For better performance, plug the repeater into an
outlet halfway between the router and the WiFi
dead zone.
The location you choose must be within the range
ofyourexisting WiFi network.
2.Wait until the Signal LED turns blue. if not, relocate
the repeater closer to the router.
3. Connect yourWIFi devices to the repeater using the
55le set by yourself, or your router's ssm with a
suffix JXT/SGEXT, and using theWiFi password
same as yourWiFl router.
Antenrra’s upward and vertical to the ground
:)Slgnal
Blue: Good connection
Red. Bad connection
Method 2: Extending Your WiFi Network Using WPS
Vou can use Method 1 if your router has aWFS button lpossible
icons ofawps button: ',@,or“b’). Otherwise, use Method i.
0 Power on the Repeater
Plug the repeater into a power
outlet near the router in the
same room.
Wait until the PWR LEDtums
solid blue.
0 Extend Your WiFi Network
l . Press the is button on the router and within 2 minutes press the is button
on the repeater.
press
2.Wait until the signal Lco on the repeaterturnssolid blue. lfthe Signal LED does
notturn solid blue, try Method i.
9 Relocate the Repeater
‘I. For better performance, plug the repeater into an
outlet halfway between the router and the WiFi
dead zone.
The location you choose must be within the range
ofyour existing WiFi network.
2.Wait until the signal LEDturns blue. lfnot, relocate
the repeater closer to the router.
3. connect yourWiFl devices to the repeater.
The repeater‘s 55le are yourWiFl router‘s SSlD with
a suffix ,ExT/sfisxT.The wil=i password of the repeater
is same asyourwiri router.
Antenna’s upward and vertical to thegnsund
asignal
iilue- Good connection
lied: Bad connection
FAQ
or: I cannot login to the Web UI orthe repeater. What should I do?
Try the following solutions:
- if a WiFi device is used, ensure that yourWiFi device has connected
to the repeater‘s WiFi network TendanT, and the Mobile Data
(ifany) function is disabled.
- lfa computer is used, ensure thatyourcomputer has connected to
the repeater‘s WiFi network TendagExT, and your computer has set
to Obtain an IP address automatically and Obtain DNS server a
ddress automatically.
- Restore the repeater to factory settings, and try again.
Q2: How to restore the repeater to factory settings?
When the PWR LED of the repeater is solid on, press the RESET button
on the repeater using a paperclip, and releaseAfterthe PWR LED
turns solid on, the repeater is restored to the factory settings,
Q3:Tl|e repeater cannot find thew
what should I do?
network of my router.
The router may be encrypted with WEP or WPAIWPA (Enterprise)
algorithm, Change the encryption type ofthe router to wpaepsx
or WPA2-PSK, and try scanning again.
C€
cc iviarlrWarning
This is a class a product in a domestic environment, this product maycause radio interference,
in which case the user may be required to rake adequate measures
Operations in the it 5—5.256Hz band are restricted to indoor use only
This equipment Should be installed and operated with minimum distance 20cm between the
radiatorsyourbody
NOTE: (i) The manufacturer is not responsible forany radio orTv interlerence caused by
unauthorized modifications to this ad ' ment.
[2)To avoid unnecessary radiation interference, it is recommended to use a shielded
RJAS cable.
Declaration of Conformity
hereby, SHENZHENTENDATECHNDLOGV co. LTD declares thatthe radio equipment type M5
is in compliancewrth Directive muss/Eu.
Thefull text olthe Eu declaration ofconformity is available at the following internet
address: http:rrwww.tendacn.com/enrservice/downloadrcatarlol html.
EIRP Power (Mam):
2.45H1;i9.5dBm
son: 20,5dBm
Dpenle frequency:
1 46 EU/ZADurZABZ SMHZ(CHicCHi31
so: EU/Si50—5250MH1(CH36—(H4Ei
Software Ve n- vi 5 i 3 07.05
F@
rcc Statemeni
This equipment has been tested and found to complywith the limits for a class a digital device,
pursuant to Part is ofthe FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation This equipment generates, uses and
can radiate radiofrequency energy and, ifnot installed and used in accordance with the
instructions, may cause harmful interference ro radio communications However, there is no
guarantee that interference will not occur in a particular installation. lfthis equipment does
cause harmful interrerence to radio or television reception, which can be determined by
turning the equipment offand on, the user is encouraged to try to correct the interference by
one or more of the following measures,
. Reorlcnt or relocate the receiving antenna.
. lncreasetheseparation betweenthe equipmentand receiver
- connect the equipment into an outlet on a circuit different from that to which the receiver is
connected
. consult the dealer oran experienced radio/TVtechnician for help
This device is restricted to be used in the indoor.
operation is subiectto the following two conditions. Hi this device may not cause harmful
interference, and izl this device must accept any interference received, including interference
that may cause undesired operation
Radiation Exposure Statement
This device complies with F(( radiation exposure limits Set forth foran uncontrolled
environmenrand italso complies with Parr is ofthe rcc RF Rules
This equipment Should be installed and operated with minimum distance 20cm between the
radiatoroyourbody
cant“
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
This transrniner must not be (La—located or operating in coniunction with any other antenna or
transmitter.
NOTE: (i) The manufacturer is not responsible forany radio orTv interference caused by
unauthorized modifications to this equipment. lzi To avoid unnecessary radiation interference.
ills recommended to use a shielded RJAS cable
fl lill
nccrctiuo
This product bears the selective sorting symbol forWaste electrical and electronic equipment
(WEEE) This means thatthls product must be handled pursuantto European directive ZOiZ/iQ/
cu in orderto be recycled or dismantled to minimize its impact on the environment.
User hasthe choice to give his productto a competent recycling organization or tothe retailer
when he buys a new electrical orelectronic equipment
in Rsswaming
industry CanadamSScGen Issue!)
The device for operation in the band SiSDcSZSO MHz is only for indoor use to reducethe
potential for harmful interference to co—channel mobile satellite systems
les dispositifs fonctionnant dans la bande SiSQcSZSO Mhz sont reserves uniquement pour une
utilisation a l‘inte‘rieur afln de re‘duire les risoues de brouillage preludiciable aux systemes de
satellites mobiles utilisant les memes canaux
This device complies with lndusrry Canada's licence—exempt RSSs Oper
following two conditions:
tirThis device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation ofthe device
Le present appareil est conforme aux (NR d‘lndustrie canada applicables aux appareils radio
exempts de licence, L'exploitation est autorisee aux deux conditions suivantes,
(|) l‘appareil ne doit pas produire de brouillage,
(2) l‘utilisateur de I‘apparell doit acceptertout brouillage radioe‘lectrigue subi. méme si le
brouillage est susceptible d‘en compromettre le fonctionnement.
n is subiecr to the
i: had
ion Exposure Statement:
This transmitter must not be co—locared or operating in coniunction with any other antenna or
transmitter This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body,
(et cmmeur ne doit pas etre coeplace‘ ou ne fonctionnant en meme temps qu‘aucunc autrc
anrenne ou e'merreur cer equipemenr devrair erre insralle' er actionne avec une distance
minimum de 20 centimetres entre le radiateur et votre corps.
The device meets the exemption from the routine evaluation limi in section 2.5 of R55 m
and compliance wrth R55c|02 RF exposure, users can obtain canadian information on HF
exposure and compliance
Le dispositirrencontre l‘exemption des limites courantes devaluation dans la section 2,5 de
R55 i02 et la conformi a l‘exposltiun de RSSciD2 rf, utilisateurs peut obtenir l‘information
canadienne sur l‘exposition et la conformite de rf.
acac cz okocccic ctcsrknnircvtv
trLUHuMTNLATPLP'TkosiXKriSEuK
Operating temperature: o°c~4o°c Operating humidity: renown hh, nonccondensing
Technical Support
ShenzhenTendaTechnology Co, Ltd.
sea Floor,Tower E3, N0,i om , zhongshanyuan Road, Nanshan District, Shenzhen,
China SiBDSZ
United States Hotlln i7500757075892
Canada Hotline: |7388799575966
HorigKong Hotline: OOSSZcEi 93i 995
Skype: endasz
Website: http:// wwwtendacncom
Ecma’ upporr@tenda.com.cn
copyright
fa mi 7 shenzhen Tenda Technology co, Ltd All rights reserved.
Tenda is a registered trademark legally held by shenzhen Tenda Technology Co, Ltd Other
brand and product names mentioned herein are trademarks or registered trademarks of
their respective holders. Specifications are subject to change without notice,

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : user
Create Date                     : 2017:11:20 11:18:44+08:00
Modify Date                     : 2017:12:04 09:56:16+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : user
Title                           : A18V1.0-TDE01安装指南03曲
Creator Tool                    : CorelDRAW X5
Metadata Date                   : 2017:11:20 11:20:09+08:00
Producer                        : Corel PDF Engine Version 15.2.0.686
Document ID                     : uuid:81f099d8-4df8-4ab2-bc20-46114a12f6a5
Instance ID                     : uuid:8af30c4a-74c2-4cae-9d75-b489c5716b15
Page Count                      : 1
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)

EXIF Metadata provided by EXIF.tools