TENDA TECHNOLOGY D151V3 150 Mbps Wireless N ADSL2+ Modem Router User Manual D151V3 0 ARL01 10033226

Download:
Mirror Download [FCC.gov]
Document ID	3491462
Application ID	GCG5jr5B3+uLnnWj4b4mAg==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	194.37kB (2429592 bits)
Date Submitted	2017-08-01 00:00:00
Date Available	2017-08-01 00:00:00
Creation Date	2017-07-24 13:40:32
Producing Software	Adobe PDF library 11.00
Document Lastmod	2017-08-01 09:29:46
Document Title	D151V3.0-ARL01安装指南10033226
Document Creator	Adobe Illustrator CC 2014 (Windows)
Document Author:	user

n Connect the Modem Router
Tenda
LED Indication
Snlldon Themodcmfouturisconnectedtoapowersupplypfopely
(b
Installation Guide Plenum ..
You can download the user guldl from wwwtendeori com i Blinking rh. iyfllm lswnfllng preperty
for more details oi the modern router.
isoMbpe wireless NADstt Modem Router
Mod-i. Dlsi v3
on Yh-iyslnmoounolwork
solloon rhe modem rcuierouinine an IP address
elrnnno rhe modern reuterlc irrnemrttlnc flail
solider.
V) D" rhe wvs neooileiren oroceuruuecesetul
elinnno rhe modem rcuierls DuffelmlnwWPSlleqollatioll with a clientdzvlce
o" TheWFStellurelsdiubledmrtn-WFStulureiseniblsdbuttnu
i '.
modern rout-f no" not perform nlgollallonwnhawtnlnn clilnl
x/ 59““ solioon rhetmrelereteature leeneoleo
Eltnktnv outnisoeinctrnnernirtedwtrelereiv
Off rh. Wu-lui nature i(diiat7lld
Snlldon Thispon l: ronntctod tor device properly
. — Ethemet cable Telephone cable
. elrnnno rhre port it trrnrmlttlne ortr
Pc
Telephone
Packing List
Modern Router ' 1
Ethernet cable ' t
:nfige cable - 2
p er‘
pawsrndaptcr ‘1 among rhe device it doingADSLnegutlatlon
Installation Guide ' 1
on Yhtsvon lr norconnoettd to adtvtc-
sullaun rh-modemrout-festablishesanADSlcann-ctlonsuccnnlully
on Th-DSLnonlsnnlcnnmcladtoadnvlu
iieny item it incorrect. misting eroameced. Dime kesv me original Package Not-
ano contact the vendor tor replacement lrrirrieolaieiy
ifyau use an Ethernet cable to connect your computer to the internet before using this the LED is resemo
modern rout-r. connect the ethemu cent. to the peril oftll- modern router for internet
ace-es ' images herein are for reference only Please refer to the actual product
a Configure the MOdem ROUter Ifyour link type is Phone cable. configure the modern routerafter the DSL LED lights up and keeps on.
1. Log in to the Modem Router 2. Configure the Internet Parameters
1) Start a web browser, enter 192,163.1 ,1 in the address bar and tap ”your ISP is AirteltDSL). the modern router will automatically negotiate with Airtel ISP requiring pm.
Enter on the keyboard. no configuration once you plug the DSL port. If not. configure the modern router as below.
on Mom- page. yuuclnufuhl-fdiublnthewm‘lnutlaltlf‘. couch-neeihernnlrer
ssio ermine“ tr.y
E WmdowS Meme. Emma, 1)Link/Connection type: Select the link type and connection type according to yourenvironment.
(Ehternot cabteappliesto Ethernet access and take Appendix 1: Connect the Modem Router to
O o . 192.168'1'1 the internet through Ethernet Cablefor references.) ”km,“
2) Country and ISP details: Select your location country and your ISP from the list. Then finish the
merry (EdinE virwrvy our to Favoritcs(A) ISP details(VPI/VC|. user name and password).
more Enabli w
wearerssip [Wtuptoazitsciri
3)C|ick OKto save and apply your settings. more», l
Wail-Ll hey is nllfl- uo etos'uscli out her ore-sews
2) Enter the login user name and password (admin for both by default)
and click Login
to... -
I Dlswnnwled I Connected
— 3. Connect Your Wireless De e to the
User Name cnnmmsau. Winona WiFi of the Modem Router
Password , M s“ i Use yourwireless device to scan the SS|D(WiFiname)and
"my "D connect to it.
Link “In: Phohecable Default wireless SSID Alrtal_Zarot0|lch
corrosion rye. cache lmtsinfofmanonpromadbylocallSFl Defaullwireless key: rtel@113
country India
ISP Atrial 3? Note
17 1-. _ _ . Afteryou connectto the WIFI successfully. you can accessthe internet
" p VFW“ VP' ‘ m ml VC'L m 555” . it you want to configure the modem router using youfwifeless device,
if you change the default login user name end password, end forget them. hold down the ow pm ”my." D by you need to connect it to the WiFi ofthe modern routerfirst
Rsr outton tars secondr to reret the modern reuterto factory default settings. and then
too in to the modem router again With the default iogln information iodmin tor oothi Password mexiciloth is so
Tenda lnstalla ton Guide
Appendix 1: Connect the Modem Router to the Appendix 2: Ports/Buttons Description Appendix 3: FAQs
Internet through Ethernet Cable
When the modern router only serves as a wireless router. connect it to the internet as follows. Q1. What can I do if I cannot access the UI (User Interface)
of the modern router?
A1: Check the local PC IP settings and make sure it is 'Obtain an
IP address automatically". and then retry.
‘ .What canldoiflcannot access thelnternet?
Ethernet Jack : Try the following steps one by one:
Check your cables and make sure they all are plugged well.
(Telephone line. Ethernet cable and power adapter)
Go through the Internet settings and make sure you have
selected the correct connection type and have typed the network
It you want to use iPrv service. connect thr setrtDD box to any port
tpon1,2.3oroic1the modern router seem bux TV parameters correctly. Ifthey are not. consult your ISP and replace
Generally. the modern router can automatically negotiate with the set» . . .
topoox.and setthe portyouconnectedestheiPTv port. 1: ° them W'”‘ the correct information.
o If you still cannot access the Internet. reset your modem router to
its factory defaults and reconfigure it.
a Contact ourTechnical Support if the problem still exists.
ortlorr rum onloffthe modem router
Fiher’moctem m Hold ltdownfofsseconds until allLEDslIghtup one-and imn rel-sis- liie 03- What can I do if I forget my password?
PC '“M‘e mm” '°“"”°'“‘"'Y de'“”““'"“5 0 If you forgot the login password, restore the router to its
Connectthecomputertaport1.2or3 Connectthelnterhettothe EnabletheWPSIeatureonthewebulolthemodemrnuter.and|hert pressthls factory defaults and then use the default login User Name
modern neuter through portu button for 3 seconds to perform WPs negotiation Within 2 minutes, enable the
WPs feature orthe wireless device to establish WPs connection, ”admin" and Password “admin“ to log in.
Note that you need to reconfigure the router after resetting it
You can still refer to 2 Configure the Modem Router to configure it.
Link Type: Select Ethernet cable. to factory defaults. . .
Then complete the other internet parameters according to the information provided by your e If you forgot yourwtreless key. log in to the router's User Interface.
internet service provider. And on Home page, you can check or change the wireless key.
Preee it to turn oniott the WiFi ofthe modem router
Appendix 4: Safety and Emission Statement
Q4. How dolreset the modem routerto Its factory defaults? Operation is subject to the following two conditions: (1) this devlce may not cause
A .Withthe router powered on, press and hold the RST button harmful interference. and (2) this device must accept any interference received,
on the rear panel of the router for about 6 seconds. CE Mark Warning :cLud‘ing iréterrerencse‘tlrat may cause ””95"“ ”Gram"
. . a la ion x osure a emen
(All LEDS WI|| flash and the dams restarts) This is a Class B product. In a domesticenvironment. this product may cause radio interference. in This equipmepm should be installed and operated whh minimum dispance 20cm “Mean
which case the user may be required to take adequate measures. .
This equipment should be installed and operated with minimum distance 20cm between the "‘9 'fid'at‘" 8‘ Y°“' b°dY~
radiator 8t your body. Caution:
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by Any changes or modifications not expressly approved by the party responsible for
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference. it compliance could void the "saris anthem}, (0 sperm (his equipmem
'5'“°'""“‘”“9“‘° “593 ““9““ RJ‘5 ““9 This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference. it is recommended to use a Shielded RJ45 cable,
Fcc Statement
This equipment has been tested and found to comply with the limits for a Class B digital device.
s“°""‘°" 79"“ Tech"°'°9y c°'i L‘d' pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection
5.5 Floor. Tower E3. No.1001. Zhongshanyuan Road. against harmful interference in a residential installation. This equipment generates. uses and can
Nanshan District. shenzhencnina. 518052 radiate radio frequency energy and, if not installed and used in accordance with the instructions.
Website; m. y/wwwtenugcmom may cause harmful interference to radio communications. However. there is no guarantee that _ RECYCLING
p . , .
Egmail.suppm@tenda mm on interference will not occur in a particular installation. if this equipment does cause harmful This productbearslhe selective sorting symbollorWasle electricaland electronic
j ' ' interference to radio ortelevision reception. which can be determined by turning the equipment off enlwpfriem (WEEE)- This means that this ProdUCt must be handled nursyaiitto European
Skyvev tendasz and on. the user is encouraged to try to correct the interference by one or more of the following directive 2012/19/EU in orderio be recycled ordismantied to minimize its impact on the
Phone: Global hctline: use 755)27657180 measures; environment.
_ Reoriem a, remake the receiving antenna User has the choice to give his product to a competent recycling organization orto the
© m7 5mm" Tum "ohmic“ Co” LN. All rights "mm. 7 Increase me warm.“ between the equipment and receiven reteiierwhen he buys a new electrical or electronic equipment.
Vanda“.”Enteredtrademarkllgllly held byShsnlhenTBIIHIYGCMD'DQYCDrt-tdr — Connect the equipment into an outlet on a circuit different from that to which the receiver is
othsrorano and productnamesmentloned herein aretfademafks or registersdtrademarhs . , .,
ofthelrrespeetlve holders ¢°""“t9d- OperatingTemperature: O C~40 C
specificationer.sociecttocneneewrihcui notice. — Consult the dealer or an experienced radio/TV technician for help. Operating Humidity: (10-90) ”/oRH. non-condensing

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : user
Create Date                     : 2017:07:24 13:40:32+09:00
Modify Date                     : 2017:08:01 09:29:46-07:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : Adobe Illustrator CC 2014 (Windows)
Metadata Date                   : 2017:08:01 09:29:46-07:00
Thumbnail Width                 : 200
Thumbnail Height                : 256
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 10453 bytes, use -b option to extract)
Producer                        : Adobe PDF library 11.00
Format                          : application/pdf
Creator                         : user
Title                           : D151V3.0-ARL01安装指南10033226
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 699.999995
Max Page Size H                 : 900.000018
Max Page Size Unit              : Millimeters
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Document ID                     : xmp.did:a0651fd8-4903-274a-a950-91b2e1541e84
Instance ID                     : uuid:38a64edd-0a03-4a66-9935-36de39710238
Original Document ID            : xmp.did:a0651fd8-4903-274a-a950-91b2e1541e84
Rendition Class                 : proof:pdf
Derived From                    : 
History Action                  : saved
History Instance ID             : xmp.iid:a0651fd8-4903-274a-a950-91b2e1541e84
History When                    : 2017:07:24 13:40:21+08:00
History Software Agent          : Adobe Illustrator CC 2014 (Windows)
History Changed                 : /
Page Count                      : 1

EXIF Metadata provided by EXIF.tools