TENDA TECHNOLOGY FH1201 High Power Wireless AC1200 Dual-band Router User Manual part 4 of 4

SHENZHEN TENDA TECHNOLOGY CO., LTD. High Power Wireless AC1200 Dual-band Router part 4 of 4

User Manual_part 4 of 4

                                            High Power Wireless AC1200 Dual Band Router 116 ④ Click Change adapter settings.  ⑤ Click Local Area Connection and select Properties.
                                            High Power Wireless AC1200 Dual Band Router 117 ⑥ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
                                            High Power Wireless AC1200 Dual Band Router 118 ⑦ Select Obtain an IP address automatically and click OK.
                                            High Power Wireless AC1200 Dual Band Router 119 ⑧ Click  OK  on  the  Local  Area  Connection  Properties  window to  save  your settings.
                                            High Power Wireless AC1200 Dual Band Router 120 Windows XP ① Right-click My Network Places and select Properties.  ② Right click Local Area Connection and select Properties.
                                            High Power Wireless AC1200 Dual Band Router 121 ③ Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
                                            High Power Wireless AC1200 Dual Band Router 122 ④ Select Obtain an IP address automatically and click OK.
                                            High Power Wireless AC1200 Dual Band Router 123 ⑤ Click  OK  on  the  Local  Area  Connection  Properties  window to  save  your settings.
                                            High Power Wireless AC1200 Dual Band Router 124 Appendix 2 Join Your Wireless Network Tip ------------------------------------------------------------- To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one. -------------------------------------------------------------------- Join Your Wireless Network - Windows 7 ① Click Start -> Control Panel.
                                            High Power Wireless AC1200 Dual Band Router 125 ② Click Network and Internet.    ③ Click Network and Sharing Center.
                                            High Power Wireless AC1200 Dual Band Router 126 ④ Click Change adapter settings.   ⑤ Right  click  the  Wireless  Network  Connection  and  select Connect/Disconnect.
                                            High Power Wireless AC1200 Dual Band Router 127 ⑥ Select the wireless network you wish to connect and click Connect. Depending on whether you are joining a  secured or unsecured wireless network,  you will see different screens: A. If you are joining an unsecured wireless network as seen below:  B. If you are joining a secured wireless network as seen below:
                                            High Power Wireless AC1200 Dual Band Router 128 You are required to enter a security on the following screen. Enter the security key and click OK.   ⑦ When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully.
                                            High Power Wireless AC1200 Dual Band Router 129 Appendix 3 Factory Default Settings Item Default Settings Router Login Login    IP Address 192.168.0.1 Network Settings Internet  Connection Type DHCP MAC Address Find  it  on  the  label  attached  to  the bottom of your device. MTU PPPoE: 1450 Dynamic IP: 1450 Static IP: 1450 WAN Speed Auto-negotiation DNS Disabled LAN Settings IP Address 192.168.0.1 Subnet Mask 255.255.255.0 DHCP Server Enabled IP Pool 192.168.0.100~192.168.0.200 Time Zone (GMT+08:00)Beijing, Chongquing, Hong Kong, Urumq Set  Time  and  Date manually Disabled Wireless Settings Wireless Enabled Primary  SSID (Network Name) Tenda_XXXXXX    (XXXXXX  is the  last  six  characters  in  the device's MAC address) Wireless Extender Disabled Network Mode 11b/g/n mixed SSID Broadcast Enabled AP Isolation Disabled Channel Auto Channel Bandwidth 20/40 Extension Channel Auto WMM Capable Enabled APSD Capable Disabled Security Mode None WPS Disabled Tools Remote  Web Management Disabled Login Password None Others Bandwidth Control Disabled Traffic Statistics Disabled DMZ Host Disabled
                                            High Power Wireless AC1200 Dual Band Router 130 UPnP Enabled Security Disabled
                                            High Power Wireless AC1200 Dual Band Router 131 Appendix 4 FAQs This section provides solutions to problems that may occur during installation and operation of the device. Read the following if you are running into problems.   If  yo ur  pro blem  is  no t  covered  he re ,   pl ease  feel  free   to  go  to  w ww.ten da cn.co m   to  find  a  sol u tion  or  e m ail   your  proble ms  to :  suppo rt@ten d a.co m .cn   or  s upport 02@tenda .com. c n. We  w ill   be m o re tha n happ y to  h elp yo u  out   as so o n as  possi ble.   1. Q: I cannot access the device's management interface. What should I do?   Make  sure  the  power  LED  on  the  device's  front  panel  is  on  and  the  SYS LED blinks normally.  Make  sure all  cables  are  correctly connected  and  the corresponding  LAN LED on the device is on.  Verify  that  your  PC's  TCP/IP  settings  are  configured  correctly.  If  you select  the  "Use  the  following  IP  address"  option,  set  your  PC's  IP  address  to any  IP  address  between  192.168.0.2~192.168.0.254.  Or  you  can  select  the "Obtain an IP address automatically" option.  Check  the  IP  address  you  entered  in  your  browser.  It  should  be http://192.168.0.1.  Open  your  browser  and  click  Tools  ->  Internet Options  ->  Connections -> LAN settings, uncheck the Use a proxy server for your LAN option.    Press  the  WPS/RST  button  for  over  7  seconds  to  restore  your  device  to factory default settings. Then log to your device again. 2. Q: I changed the login password and unfortunately forget it. What should I do? Press  the  WPS/RST  button  for  over  7  seconds  to  restore  your  device  to  factory default settings. 3. Q: My computer shows an IP address conflict error after having connected to the device. What should I do?  Make  sure  there  are no  other  DHCP servers on  your  LAN  or other  DHCP servers are disabled.
                                            High Power Wireless AC1200 Dual Band Router 132  Make sure the device's LAN IP is not used by other devices on your LAN. The device's default LAN IP address is 192.168.0.1.  Make sure the statically assigned IP addresses to the PCs on LAN are not used by others PCs. 4.  Q:  I  have  problems  connecting  to  Internet/Secure  websites  do  not  open  or displays only part of a web page. What should I do? This  problem  mainly  happens  to  users  who  use  the  PPPoE  or  Dynamic  IP  Internet connection type. You  need to change the MTU size. Try changing the MTU to 1450 or 1400. If  this  does not help,  gradually reduce  the MTU  from the maximum value until the problem disappears.
                                            High Power Wireless AC1200 Dual Band Router 133 Appendix 5  Remove Wireless Network from Your PC If  you  change  wireless  settings  on  your  wireless  device,  you  must  remove  them accordingly from your PC; otherwise, you may not be able to wirelessly connect to this device. Below describes how to do remove a wireless network from your PC. Windows 7 ① Right-click the Network icon and select Properties.   ② Select Manage Wireless Networks.
                                            High Power Wireless AC1200 Dual Band Router 134 ③ Select the wireless network and click Remove network.  Windows XP ① Right-click My Network Places and select Properties.
                                            High Power Wireless AC1200 Dual Band Router 135 ② Right click Wireless Network Connection and then select Properties.
                                            High Power Wireless AC1200 Dual Band Router 136 ③ Click Wireless Networks, select the wireless network name under Preferred networks and then click the Remove button.
                                            High Power Wireless AC1200 Dual Band Router 137 Appendix 6 Safety and Emission Statement   CE Mark Warning This is a Class B product in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures  NOTE:(1)The  manufacturer  is  not  responsible  for  any  radio  or  TV  interference caused by unauthorized modifications to  this  equipment.(2) To  avoid  unnecessary radiation interference, it is recommended to use a shielded RJ45 cable    FCC Statement This  device  complies  with  Part  15  of  the  FCC  Rules.  Operation  is  subject  to  the following two conditions: (1) This device may not cause harmful interference, and (2)  this  device  must  accept  any  interference  received,  including  interference  that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.    These limits are designed to provide  reasonable  protection  against  harmful  interference  in  a  residential installation. This equipment generates, uses and can radiate radio frequency energy and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause harmful  interference  to  radio  communications.    However,  there  is  no  guarantee that interference will not occur in a particular installation.    If this equipment does cause  harmful  interference  to  radio  or  television  reception,  which  can  be determined  by  turning  the  equipment  off  and  on,  the  user  is  encouraged  to  try  to correct the interference by one of the following measures: -  Reorient or relocate the receiving antenna.
                                            High Power Wireless AC1200 Dual Band Router 138 -  Increase the separation between the equipment and receiver.  -  Connect the equipment into an outlet on a circuit different from that        to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help. FCC  Caution:  Any  changes  or  modifications  not  expressly  approved  by  the  party responsible  for  compliance  could  void  the  user's  authority  to  operate  this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.   Radiation Exposure Statement This  equipment  complies  with  FCC  radiation  exposure  limits  set  forth  for  an uncontrolled  environment.  This  equipment  should  be  installed  and  operated  with minimum distance 20cm between the radiator & your body. NOTE:  (1)  The  manufacturer  is  not  responsible  for  any  radio  or  TV  interference caused by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable

Navigation menu