TENDA TECHNOLOGY FH1206 High Power Wireless AC1200 Dual Band Router User Manual part 1 of 4
SHENZHEN TENDA TECHNOLOGY CO., LTD. High Power Wireless AC1200 Dual Band Router part 1 of 4
Contents
- 1. User Manual_part 1 of 4
- 2. User Manual_part 2 of 4
- 3. User Manual_part 3 of 4
- 4. User Manual_part 4 of 4
User Manual_part 1 of 4
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2326501 |
| Application ID | nIHwnWXy2hLmVVXuQh2SYw== |
| Document Description | User Manual_part 1 of 4 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 229.85kB (2873178 bits) |
| Date Submitted | 2014-07-16 00:00:00 |
| Date Available | 2014-07-16 00:00:00 |
| Creation Date | 2014-07-08 17:03:18 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2014-07-08 17:03:19 |
| Document Title | User Manual_part 1 of 4 |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Tenda |
High Power Wireless AC1200 Dual Band Router High Power Wireless AC1200 Dual Band Router Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. All the products and product names mentioned herein are the trademarks or registered trademarks of their respective holders. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co., Ltd. No part of this publication can be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the prior written permission of Shenzhen Tenda Technology Co., Ltd. If you would like to know more about our product information, please visit our website at http://www.tendacn.com. Disclaimer Pictures, images and product specifications herein are for references only. To improve internal design, operational function, and/or reliability, Tenda reserves the right to make changes to the products described in this document without obligation to notify any person or organization of such revisions or changes. Tenda does not assume any liability that may occur due to the use or application of, the product or circuit layout(s) described herein. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all sta tements, information and recommendations in this document do not constitute the warranty of any kind, express or implied. II High Power Wireless AC1200 Dual Band Router Preface Thank you choosing Tenda! Please read this user guide before you start! This user guide instructs you to install and configur e the router. This user guide uses the following formats to highlight special messages: Note: This format is used to highlight information of importance or special interest. Ignoring this type of note may result in ineffective configurations, loss of data or damage to device. Tip: This format is used to highlight a procedure that will save time or resources. Knowledge Center: Description of fields on the device GUI. Technical Support support02@tenda.com.cn Skype: tendasz YouTube: Tendasz1999 Hotline: 1-800-570-5892 (USA) (044)197-780-6119 (UK) (061) 1300787922 (Australia) (0852)36120883 (HongKong) (064) 800787922 (New Zealand) Website: http://www.tendacn.com III High Power Wireless AC1200 Dual Band Router Table of Contents I Product Overview ............................................................................................... 1 1 Package Contents .............................................................................................. 1 2 Getting to kno w yo ur router ............................................................................... 1 LEDs on Front Panel ......................................................................................... 1 Label ................................................................................................................ 3 3 Position Your Router ......................................................................................... 3 II Quick Internet Setup ......................................................................................... 5 1 Getting Prepared ............................................................................................... 5 2 Hard ware Install ............................................................................................... 5 3. Internet Setup .................................................................................................. 7 Configure PC .................................................................................................... 7 Configure Router .............................................................................................. 7 4 Verify Internet Connectivity ............................................................................ 11 5 Join Your Wireless Network ............................................................................. 13 Join Your Wireless Network - Windo ws 7 ......................................................... 13 Join Your Wireless Network - Windo ws XP ....................................................... 16 III Features & Configurations ............................................................................. 19 1 Status ............................................................................................................. 19 1.1 System Status ............................................................................................ 19 1.2 WAN Status ............................................................................................... 20 1.3 LAN Status ............................................................................................... 21 1.4 Wireless Status .......................................................................................... 21 1.5 Connection Status ...................................................................................... 22 2 Network .......................................................................................................... 22 2.1. LAN Settings ........................................................................................... 22 2.2. WAN Settings ........................................................................................... 23 2.3 Port Mode ................................................................................................. 28 2.4 MAC Clone ............................................................................................... 29 2.5. DHCP ...................................................................................................... 30 2.6 DHCP Client List ...................................................................................... 31 2.7 Static Assignment ...................................................................................... 32 2.8 DHCP Server - Guest Network ................................................................... 33 3 Wireless Settings ............................................................................................ 35 3.1 Wireless-Basic .......................................................................................... 35 3.2 Guest Network .......................................................................................... 36 3.3 Security .................................................................................................... 38 3.4 Advanced .................................................................................................. 39 3.6 Wireless Extender ...................................................................................... 41 3.5 Access Control .......................................................................................... 71 IV High Power Wireless AC1200 Dual Band Router 3.7 WPS Setup ................................................................................................ 75 3.8 Connection Status ...................................................................................... 78 4 Advanced Applications .................................................................................... 79 4.1 Band width Control .................................................................................... 79 4.3 DDNS ....................................................................................................... 81 4.1 Virtual Server ............................................................................................ 84 4.2 DMZ Host ................................................................................................. 87 4.4 UP nP ........................................................................................................ 88 4.6 Route Table ............................................................................................... 89 4.5 Static Route .............................................................................................. 89 5 Security .......................................................................................................... 94 5.1 MAC Filter ................................................................................................ 94 5.2 Client Filter .............................................................................................. 96 5.3 URL Filter ................................................................................................ 98 5.4 Remote Web Management ........................................................................ 100 6 Tools ............................................................................................................ 101 6.1 Logs ....................................................................................................... 101 6.2 Traffic Statistics ...................................................................................... 102 6.3 Time ....................................................................................................... 104 6.4 Change Password ..................................................................................... 105 6.5 Backup .................................................................................................... 106 6.6 Restore ................................................................................................... 108 6.7 Firmware Update ..................................................................................... 109 6.9 Reboot .................................................................................................... 112 Appendix 1 Configure PC TCP/IP Settings ........................................................ 114 Windo ws 7 ....................................................................................................... 114 Windo ws XP .................................................................................................... 120 Appendix 2 Join Your Wireless Network ........................................................... 124 Join Your Wireless Network - Windo ws 7 .......................................................... 124 Appendix 3 Factory Default Settings ................................................................. 129 Appendix 4 FAQs ............................................................................................... 131 Appendix 5 Remove Wireless Network fro m Your PC ..................................... 133 Windo ws 7 ....................................................................................................... 133 Windo ws XP .................................................................................................... 134 Appendix 6 Safety and Emission Statement ....................................................... 137 High Power Wireless AC1200 Dual Band Router I Product Overview 1 Package Contents Unpack the package. Your box should contain the following items: If any of the parts are incorrect, missing, or dama ged, contact your Tenda dealer. Keep the carton, including the original packing materials, in cas e you need to return the product for repair. 2 Getting to know your router LEDs on Front Panel D. FH1201 High Power Wireless AC1200 Dual Band Router LED Status Description PWR Solid Indicates a proper connection to the power supp ly Off SYS connection betwe en the power outlet and router. Blinking System is functioning correctly. Solid/Off The unit is malfunctioning. Solid WPS Blinking WAN Power is not supplied to the router. Please check the power WPS is enabled Device is performing WPS authentication on a client device. Off WPS function is disabled negotiation is completed Solid WAN port connected correctly Blinking WAN port is transferring data Off Solid LAN port connected correctly （ 1/2/3） Blinking LAN port is transferring data 2.4GHz Solid Blinking Off 5GHz Solid Blinking Off WPS authentication No link is detected on this port. LAN Off or No link is detected on this port. 2.4G wireless radio is on Data being transferred over 2.4G wireless network 2.4G wireless radio is off 5G wireless radio is on Data being transferred over 5G wireless network 5G wireless radio is off Buttons & Interfaces on Back Panel High Power Wireless AC1200 Dual Band Router 1→WiFi： Wireless radio ON/OFF button. Pressing the WiFi On/Off button turns the wireless radios on and off. 2→WPS/RST: P ressing it for over 7 seconds restore s the device to factor y defa ult settings. For device's factory default settings, see Appendix 3 Factory Default Settings. Pressing it for about 1 second enable s WPS-P BC and the WP S LED blinks. You can use this button to quickl y add a wir eless device or co mputer to your wireless net work. 3→LAN (1/2/3): The local (LAN) Ethernet ports are for cabling the device to local computers, switches, etc. 4→WAN: The Internet (WAN) Ethernet port is for cabling the router to a cable or DSL modem. 5→PWR: The power port for connecting the router to power outlet. Label 1→Default Login IP address. This IP address is to be used to access the router ’s settings through a web browser. If you change it , you have to open a new connection to the new IP address and log in again. 2→MAC address. 3→WPS pin code. 3 Position Your Router The operating distance or range of your wireless connection can var y significantly depending on the ph ysical place ment of you r router. For best per formance, place your router: Near the center of the area where your computers, smart phones and other devices operate, and preferably within line of sight to your wireless devices. High Power Wireless AC1200 Dual Band Router In an elevated location such as a high shelf, keeping the number of walls and ceilings between the router and your other devices such as computers and smart phones to a minimum. Away from electrical devices that are potential sources of interference, such as ceiling fans, home security systems, microwaves or PCs. Away from any large metal surfaces, such as a solid metal door or aluminum studs. Away from other materials such as glass, insulated walls, fish tanks, mirrors, brick, and concrete that can also affect your wireless signal. High Power Wireless AC1200 Dual Band Router II Quick Internet Setup 1 Getting Prepared Before you start the installation process, you need to prepare the following: Item Router Power Adapter PC Ethernet Cable Ethernet Cable from the incoming Internet side Gather Information ISP Description Find it in your package Please use the power adapter that comes in the package. Using a power adapter with a different v oltage rating than the one included with the router will cause damage to the router. Should have a installed IE8 or higher browser You will need it to connect your PC to the router This is provided by your ISP Your Internet service provider (ISP) should have provided you with all of the information needed to connect to the Internet.If you cannot locate this information, ask your ISP to provide it. If your ISP uses a PPPoE Internet connection, you will need ISP login name and password. If you use a DHCP Internet connection, no information is needed. If your ISP gives you a fixed or static IP address for Internet connection, you will need to gather the following information: 1) IP Address 2) Subnet Mask 3) Gateway 4) DNS Server 5) Alternate DNS Server (Optional) 2 Hardware Install Note ------------------------------------------------------------------------------------- Before you start, make sure you can access Intern et by connecting the cable from the incoming Internet side to your PC. ------------------------------------------------------------------------------------------------ High Power Wireless AC1200 Dual Band Router ① Connect the cable from the incoming Internet side to the WAN port on the router. ② Connect one of the LAN ports on the router to the RJ45 (NIC) port on your PC using an Ethernet cable. ③ Connect the router to a surge protected power strip using the included power adapter. High Power Wireless AC1200 Dual Band Router Note ------------------------------------------------------------------------------------ Using a power adapter with a different voltage rating than the one included with the Device will cause damage to the Device. ------------------------------------------------------------------------------------------------ 3. Internet Setup Configure PC If your computer is set to a static or fixed IP address (this is uncommon), change it to obtain an IP address automatically from the router. If you are unsure , see Appendix1 Configure PC TCP/IP Settings. Configure Router Step 1. Log in to Web manager. ③ ① Launch a web browser, say, IE. ② In the address bar, input 192.168.0.1, and press "Enter". The login window appears. High Power Wireless AC1200 Dual Band Router ④ This router will automatically detect WAN connection status when you press the Enter key (This happens when you f irst time set up the router or when you restore the router to factory default settings). ⑤ The following screen appears when your Internet connection type is detected. Click OK. High Power Wireless AC1200 Dual Band Router ⑥ And the Quick Setup screen appears after you clicked the OK button. Tip -------------------------------------------------------------------------------------- 1. If you are not using the PPPoE or Dyn amic IP (DHCP) Internet connection type, see Static IP. 2. The default Internet connection type is DH CP (Dynamic IP). 3. The router has a preset wireless sec urity key of 12345678 but it is deactivated by factory default. However if you click the OK button on that page, the wireless security key of 12345678 will be activated automatically. 4. Here we use the WPA -PSK/AES for explanation. If you want to use other security mode and/or cipher type, see Security. -----------------------------------------------------------------------------------------------Step 2. Internet Setup & Wireless Security Setup A. Select Dynamic IP (DHCP) to obtain IP Address information automatically from your ISP. Select this option if your ISP does not give you any IP information or user name and password. B. Select PPPoE if your ISP uses a PPPoE connection and gives you a PPPoE user name and a PPPoE password. Dynamic IP (DHCP) & Wireless Security Setup High Power Wireless AC1200 Dual Band Router ① Select Dynamic IP (DHCP). ② The default wireless band is 2.4G and default wireless security key is 12345678. For better security key, please change the default security key (Security key should be 8-63 characters). ③ Click Save to save your settings. PPPoE & Wireless Security Setup ① Select PPPoE. 10 High Power Wireless AC1200 Dual Band Router ② Enter the ISP login name and password . ③ The default wireless band is 2.4G and default wireless security key is 12345678. For better security ke y, please change the default security key (Security key should be 8 -63 characters). ④ Click Save to save your settings. 4 Verify Internet Connectivity System will automatically enter the Status screen after you save the settings made on the Quick Setup screen. A. If the connection status displays "Connected" (as shown below). you are connected to the Internet. B. If connection status displa ys "Cable i mproperly co nnected! ”， the connection between the router and Internet fails. Make sure the cable from the incoming Internet side is properly connected to the router's WAN port. If nothing is wrong, "Connecting" or "Connected" will be displayed. 11 High Power Wireless AC1200 Dual Band Router I f the connection status disp la ys "Connecting …” and WAN IP address displa ys "0.0.0.0", wait until the page updates five ti mes. And if it still displays "Connecting …” try the following steps: ① Make sure physical connections are correctly established. ② Make sure you can access Internet on your PC without using the router. ③ If your ISP uses a PPPoE Internet connection, make sure you entered the correct ISP login name and password. ④ If the problem is still unsolved, see 2.4 MAC Clone. 12 High Power Wireless AC1200 Dual Band Router 5 Join Your Wireless Network Having finished above settin gs, you can search for the device's default wireless network (SSID) from your wireless devices (notebook, iPad, iPhone, etc) and enter a security key to connect to it wirelessly. Tip -------------------------------------------------------------------------------------- 1. The router's SSID is Tenda_XXXXXX by default. You can find it on the label on the bottom of the router. 2. Also, you can find the MAC address on label on the bottom of the router. 3. To join your wireless network, the PC you use must have an installed wireless network adapter. If not, install one. ------------------------------------------------------------------------------------------------ Join Your Wireless Network - Windows 7 ① Click the icon Tip -------------------------------------------------------------------------------------- If you cannot find the on the notific ation area on the botto m right corner. icon, tr y disabling the wire d network adapter or unplug the Ethernet cable fro m the wi red network adapter of yo ur P C and refresh your de sk top. If the problem re mains unsolved, see Join Your Wireless Network - Windows 7. ------------------------------------------------------------------------------------------------ 13 High Power Wireless AC1200 Dual Band Router ② Select the wireless n etwork you wish to connect and click Connect. 14 High Power Wireless AC1200 Dual Band Router ③ If you see the screen below, you are connecting to the wireless network. ④ Enter the security key and click OK. ⑤ When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. 15 High Power Wireless AC1200 Dual Band Router Join Your Wireless Network - Windows XP ① Right click My Network Places from your PC's desktop and select Properties. 16 High Power Wireless AC1200 Dual Band Router ② Right click Wireless Network Connection and select View Available Wireless Networks. ③ Double click the wireless network you wish to 17 connect. High Power Wireless AC1200 Dual Band Router ④ Enter the security key and click Connect. ⑤ When you see Connected displayed next to the wireless network you selected, you have connected to the wireless network successfully. 18 High Power Wireless AC1200 Dual Band Router III Features & Configurations For more and advanced feat ures, click Advance d on the home page. 1 Status 1.1 System Status Click Advanced on the home page and the Status screen appears. Here you can view the router ’s WAN status and system status as noted below: Tip ---------------------------------------------------------------------------------------- 1. Connection Status: Displays the router's current WAN connection status: Disconnected, Connecting, or Connected. For explanation of the 3 connection statuses, see 4 Verify Internet Connectivity . 2. IP Address/Subnet Mask/WAN subn et mask/Gateway/Primary DNS Server/Secondary DNS Server: This type of information appears only if the router successfully connects to Internet via a PPPoE or DHCP (dynamic IP) connection. However if you connect the router to Internet with static IP setting s provided by your ISP, these fields will display the settings you entered whether the router successfully connects to the Internet or not. 3. If nothing appears in the secondary DNS server field, there is no available secondary DNS server. ------------------------------------------------------------------------------------------------ 19 High Power Wireless AC1200 Dual Band Router 1.2 WAN Status Click Status -> WAN Status to enter the WAN Status screen as seen below. 20 High Power Wireless AC1200 Dual Band Router 1.3 LAN Status Click Status -> LAN Status to enter the LAN Status screen as seen b elow. 1.4 Wireless Status Click Status -> Wireless Status to enter the Wireless Status screen as seen below. 21 High Power Wireless AC1200 Dual Band Router 1.5 Connection Status Click Status -> Connection Status to enter the Connection Status screen. 2 Network 2.1. LAN Settings Click Network -> LAN to enter the LAN configuration screen.Here you can configure the LAN IP address. This IP address is to be used to access the router ’s settings through a web browser. Be sure to make a note of any changes you apply to this page. Tip ---------------------------------------------------------------------------------------- 1. Default IP address and subnet mask are respectively 192.168.0.1 and 255.255.255.0. 2. This router does not support VLSM. 3. Be sure to make a note of any changes you apply to this page. If you change the LAN IP address of the router, you have to open a new connection to the new IP address and log in again. ------------------------------------------------------------------------------------------------ 22 High Power Wireless AC1200 Dual Band Router Configuration Procedures： ① Change the IP address to the one you wish to use, for example, 192.168.10.1. ② Click Save to save your settings. 2.2. WAN Settings Click Network -> WAN to configure your Internet connection settings. Select your Internet connection type: A. Select PPPoE if your ISP uses a PPPoE connection and gives you a PPPoE user name and a PPPoE password. B. Select Static IP if your ISP provides you with fixed or static IP address settings (special deployment by ISP; this is rare). C． Select DHCP (Dynamic IP) if you can access Internet simply by directly connecting your computer to an Internet -enabled ADSL/Cable modem without configuring any settings. 23 High Power Wireless AC1200 Dual Band Router PPPoE Configuration Procedures: ① Internet connection Type: Select PPPoE. ② ISP Username: Enter the ISP login name. ③ ISP Password: Enter the ISP login password. ④ Click Save to save your settings. Knowledge Center ----------------------------------------------------------------1. MTU ： The MTU (maximum transmission unit)is the largest data packet a network device transmits. The normal MTU value for most Ethernet networks is 1500 bytes, or 1492 b yte s for PPPoE connections. For some ISPs, you might need to change the MTU. This is rarely required, and should not be done unless you are sure it is necessary for your ISP connection. For more information, see WAN MTU Setup. 2. Service Name: This is the descriptive na me of the current connection. your ISP provides it. 24 Only enter it if High Power Wireless AC1200 Dual Band Router 3. Server Name: This is the descriptive na me of the server. On l y enter it if your ISP provides it. -----------------------------------------------------------------------------------------------Static IP Configuration Procedures: ① Internet connection Type: Select Static IP. ② IP Address/Subnet Mask/WAN subnet mask/ Gateway/Primary DNS Server/Secondary DNS Server: Enter the ISP information you gathered in 1 Getting Prepared. ③ Click Save to save your settings. Dynamic IP (DHCP) 25 High Power Wireless AC1200 Dual Band Router Configuration Procedures: ① Internet connection Type: Select Dynamic IP (DHCP). ② Click Save to save your settings. WAN MTU Setup The MTU (maximum transmission unit)is the largest data packet a network device trans mits. The normal MTU value for most Ethernet networks is 1500 bytes, or 1492 bytes for PPPoE connections. For some ISP s, you might nee d to change the MTU. This is rarel y required, and should not be done unless you are sure it is necessar y for your ISP connection. When one network device communicates across the Internet with another, the data packets travel through many devices along the way. If a device in the data path has a smaller MTU value than the other devices, the data packets have to be "fragmented" to accommodate the device with the smallest MTU value. The best MTU value for Tenda routers is often just the factory default value. In some situations, changing the MTU value fixes one problem but causes another. Leave the MTU unchanged unless one of these situations occurs: A. You have problems connecting to your ISP or other Internet service, and the 26 High Power Wireless AC1200 Dual Band Router technical support of either your ISP or Tenda suggests changing the MTU value. Below web-based applications might require an MTU change: A secure website that does not open, or displays only part of a web page Yahoo email MSN portal B. You use VPN and encounter serious performance problem s. C. You used a program to optimize MTU for performance reasons, and now you have connectivity or performance problems. If you suspect an MTU problem, try changing the MTU to 1400. If this does not help, gradually reduce the MTU from the maxi mum value of 1500 until the problem disappears. The common MTU sizes and applications are listed in the table below. MTU 1500 Application Typical for connections that do not use PPPoE or VPN. 1492 1472 Used in PPPoE environments. Maximum size to use for pinging. (La rger packets are fragmented.) Used in some DHCP environments. Used in PPTP environments or with VPN. 1468 1436 Note ------------------------------------------------------------------------------------A wrong/i mproper MTU val ue ma y cause Internet co mm unication problems. For e xa mple, you ma y be unable to access cer tain websites, fra mes within websites, secure login pa ges, or FTP or P OP servers. ------------------------------------------------------------------------------------------------ 27 High Power Wireless AC1200 Dual Band Router 2.3 Port Mode Click Network -> Port Mode to enter the WAN port mode screen. Here you can configure the router's WAN speed and duplex mode. Tip ---------------------------------------------------------------------------------------- 1. The best port mode is often just the factory default of "Auto". 2. In some situations, you might need to change the port mode. For example, if the cable connected to your router's WAN port is too long, you may need to use 10M full-duplex or 10M half -duplex for better performance. ------------------------------------------------------------------------------------------------ 28 High Power Wireless AC1200 Dual Band Router 2.4 MAC Clone Some ISPs (Internet Service Providers) require end -user's MAC address to access their network. This feature copies your current PC's MAC address to the r outer. Click Network -> MAC Clone to enter the MAC Clone screen. Knowledge Center -----------------------------------------------------------------1. Restore Default M AC: Reset the router ’s WAN MAC to factory default. 2. Clone M AC: Clicking this butto n copies the MAC a ddress of the co mputer that you are no w using to the router. Also, you can manually enter the MAC address that you want to use. You have to use the computer whose MAC address is allowed by your ISP. -----------------------------------------------------------------------------------------------To restore default MAC address: ① Click Restore Default MAC. ② Click Save to save your settings. To clone the MAC address of the computer that you are now using to the router: 29 High Power Wireless AC1200 Dual Band Router ① Click Clone MAC. ② Click Save to save your settings. To manually enter the MAC address allowed by your ISP: ① Enter the MAC address allowed by your ISP. ② Click Save to save your settings. 2.5. DHCP DHCP (Dynamic Host Configuration Protocol) assigns an IP address to each device on the LAN/private network. When you enable the DHCP Server, the DHCP Server will automatically allocate an unused IP address from the IP address pool specified in this screen to the requesting device as long as the device is set to "Obtain an IP Address Automatically". If you disable this feature, you have to manually configure the TCP/IP settings for all PCs on your LAN to access Internet. Click Network -> DHCP Server to enter the DHCP Server screen. Here you can change the DHCP IP address pool and lease time. Configuration Procedures: 30 High Power Wireless AC1200 Dual Band Router ① DHCP Server: Select whether to enable or disable the DHCP server feature. ② Start IP/End IP: You can specify the starting and ending address of the IP address pool here. These addresses should be part of the same IP address subnet a s the router ’s LAN IP address. ③ Lease Time: The lease time is a time length that the IP address is assigned to each device before it is refreshed. ④ Click Save to save your settings. Tip ---------------------------------------------------------------------------------------- 1. By default, the router functions as a DHCP server. Do not disable the DHCP server feature unless you want to manually configure the TCP/IP settings for all PCs on your LAN. 2. Lease time will be renewed automatically upon expiry. No addition al configurations are needed. 3. If you are not an advanced user, the default DHCP server settings are recommended. -----------------------------------------------------------------------------------------------2.6 DHCP Client List Click Network -> DHCP Clients to enter the DHCP Clients screen. Here you can view the host name, IP address, MAC address, and lease time information. Tip ------------------------------------------------------------- You can know whether there are unauthorized accesses by viewi ng the client list. -------------------------------------------------------------------31 High Power Wireless AC1200 Dual Band Router 2.7 Static Assignment Click Network -> Static Assignment. Here you can specify a reserved IP address for a PC in the LAN. That PC will always receive the same IP addre ss each time when it accesses the DHCP server. Reserved IP addresses could be assigned to servers that require permanent IP settings. Static Assignment Application Example: To have a PC at the MAC address of 44:37:E6:4F:37:3B always receive the same IP address of 192.168.0.123. Configuration Procedures: ① Enter the IP address: 192.168.0.123. ② Enter the MAC address of 44:37:E6:4F:37:3B. ③ Click Add. 32 High Power Wireless AC1200 Dual Band Router ④ Click Save to save your settings. Tip ---------------------------------------------------------------------------------------- 1. If the IP address you have reserved for your PC is currently used by another client, then you will not be able to obtain a new IP address from the device's DHCP server, instead, you must manually specify a different IP address for your PC to access Internet. 2. For PCs that has already obtained IP addresses, you may need to perform the Repair action to activate the configured static IP addresses. -----------------------------------------------------------------------------------------------2.8 DHCP Server - Guest Network Click Network -> DHCP - Guest Network to enter the guest network DHCP server screen. If you enable the built -in DHCP server for Guest Network on this device, it will automatically configure TCP/IP protocol setting s for all DHCP -Client-enabled PCs on the Guest Network, including IP address, subnet mask, gateway and DNS etc. Configuration Procedures: ① Click Enable. ② Start IP Address: Specify the start of the range for the pool of IP addresses in the same subnet as the device. 33 High Power Wireless AC1200 Dual Band Router End IP Address: Specify the end of the range for the pool of IP addresses in the same subnet as the device. ③ Click Save to save your settings. Click Network -> Client List - Guest Network to enter the guest network DHCP client list screen. This section displays a guest network DHCP dynamic client list, which includes host name, IP address, MAC address and lease time info. Refresh: Click to update the page. 34 High Power Wireless AC1200 Dual Band Router 3 Wireless Settings 3.1 Wireless-Basic Here you can configure the basic wireless settings o f the router. Tip ---------------------------------------------------------------------------------------- 1. Primary SSID is Tenda_XXXXXX by default, where XXXXXX is the last six characters in the device's MAC address. You can find this MAC address on th e label attached on the bottom of the device. 2. If you are not an advanced user, it is advisable to only change the SSID (name of the network) and channel and leave other items unchanged. ------------------------------------------------------------------------------------------------ Configuration Procedures: ① Band: Select 2.4GHz or 5GHz. ② Primary SSID: This is the public name of your wireless network. ③ Channel: Select a channel or select Auto to let system automatically select one for your wireless network to operate on if you are unsure. The best selection is a channel that is the least used by neighboring networks. 35
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Modify Date : 2014:07:08 17:03:19+08:00 Create Date : 2014:07:08 17:03:18+08:00 Metadata Date : 2014:07:08 17:03:19+08:00 Creator Tool : Microsoft® Word 2010 Format : application/pdf Creator : Tenda Document ID : uuid:7b5079e5-9554-445a-a1cc-a5cd80503d9a Instance ID : uuid:3276cdec-c553-49de-b16c-7dc27faf4442 Producer : Microsoft® Word 2010 Page Count : 40 Author : TendaEXIF Metadata provided by EXIF.tools