TENDA TECHNOLOGY FH1206 High Power Wireless AC1200 Dual Band Router User Manual part 2 of 4

SHENZHEN TENDA TECHNOLOGY CO., LTD. High Power Wireless AC1200 Dual Band Router part 2 of 4

User Manual_part 2 of 4

High Power Wireless AC1200 Dual Band Router 36 ④ Click Save to save your settings. Knowledge Center ------------------------------------------------------------------ 1. 802.11 Mode (Network Mode): Select a correct mode according to your wireless clients.  11b: This network mode delivers wireless speed up to 11Mbps and is only compatible with 11b wireless clients.  11g: This network mode delivers wireless speed up to 54Mbps and is only compatible with 11g wireless clients.  11b/g mixed: This network mode delivers wireless speed up to 54Mbps and is compatible with 11b/g wireless clients.  11b/g/n mixed: This network mode delivers wireless speed up to 300Mbps and is compatible with 11b/g/n wireless clients.  11ac：This network mode delivers wireless speed up to 867Mbps. 2. SSID Broadcast: This option allows you to have your network names (SSIDs) publicly broadcast or if you choose to disable it, the SSIDs will be hidden. 3. Channel Bandwidth: Select a proper channel bandwidth to enhance wireless performance. This option is available only in 802.11b/g/n. Wireless speed in the channel bandwidth of 20/40 is 2 times in 20. 4. Extension Channel: This is used to ensure N speeds for 802.11n devices on the net work. This option is available only in 11b/g/n mixed mode with channel bandwidth of 20/40. ------------------------------------------------------------------------------------------------ 3.2 Guest Network Click Wireless -> Guest Network to enter the Guest Network screen. The Guest Network feature allows guests to access Internet and other users on the guest network while disallowing them to access Device web manager, users on master network and clients behind the LAN ports. Thus the wireless master network is secured. Configuration Procedures: ① Band: Select 2.4GHz or 5GHz.
High Power Wireless AC1200 Dual Band Router 37 ② Guest Network: Select whether to enable or disable the Guest Network feature. It is disabled by default. ③ Click Save to save your settings.
High Power Wireless AC1200 Dual Band Router 38 3.3 Security Click Wireless -> Security to enter the Security screen. Here you can define a security key to secure your wireless network against unauthorized accesses. To secure your wireless network ① Select a band, for example, 2.4GHz. ② Select the wireless network (SSID) you wish to encrypt. ③ Select a security mode, cipher type configure a security key. ④ Click Save to save your settings. Tip ---------------------------------------------------------------------------------------- For better security, compatibility and wireless speed, we recommend the WPA-PSK and AES. ------------------------------------------------------------------------------------------------
High Power Wireless AC1200 Dual Band Router 39 Knowledge Center ------------------------------------------------------------------ 1. WEP：Wireless speed can reach up to 54Mbps if WEP - Open is selected. 2. Key Select: Select a key to be effective for the current WEP encryption. For example, if you select Key 1, wireless clients must join your wireless network using this Key 1. 4. WPA-PSK：WPA personal, support AES and TKIP+AES cipher types. 5. WPA2-PSK：WPA2 personal, support AES and TKIP+AES cipher types. 6. WPA/WPA2-PSK mixed: If selected, both WPA-PSK and WPA2-PSK secured wireless clients can join your wireless network. 7. AES: If selected, wireless speed can reach up to 300Mbps. 8. TKIP: If selected, wireless speed can reach up to 54Mbps. 9. TKIP+AES: If selected, both AES and TKIP secured wireless clients can join your wireless network. ------------------------------------------------------------------------------------------------ 3.4 Advanced Click Wireless -> Advanced to configure the advanced wireless settings. This section allows you to config advanced settings, including AP Isolation, Beacon interval, Fragment threshold, RTS threshold and DTIM interval, etc, for your wireless networks. Normally, the default settings will work. If not, change them according to the suggestions given by your ISP or Tenda technical staff.
High Power Wireless AC1200 Dual Band Router 40 Knowledge Center ------------------------------------------------------------------------------- 1 AP Isolation: Isolates clients connecting to the primary SSID. 2 Beacon Interval: A time interval between any 2 consecutive Beacon packets sent by an Access Point to synchronize a wireless network. Do NOT change the default value of 100 unless necessary. 3 Fragment Threshold: Specify a Fragment Threshold value. Any wireless packet exceeding the preset value will be divided into several fragments before transmission. DO NOT change the default value of 2346 unless necessary. 4 RTS Threshold: If a packet exceeds such set value, RTS/CTS scheme will be used to reduce collisions. Set it to a smaller value provided that there are distant clients and interference. For normal SOHO, it is recommended to keep the default value unchanged; otherwise, device performance may be degraded. 5 DTIM Interval: A DTIM (Delivery Traffic Indication Message) Interval is a countdown informing clients of the next window for listening to broadcast and multicast messages. When the packets arrive in the router ’s buffer, the router will send DTIM (delivery traf fic indication message) and DTIM interval to alert clients of the receiving packets.
High Power Wireless AC1200 Dual Band Router 41 6 TX Power: This option lets you adjust your wireless TX power. ------------------------------------------------------------------------------------------------ 3.6 Wireless Extender Use this wireless extender feature to extend your existing wireless network.
High Power Wireless AC1200 Dual Band Router 42 Click Wireless -> Wireless Extender to enter the following screen. This device provides three modes to extend your wireless network:  To extend your wireless network using the universal repeater feature, see Universal Repeater.  To extend your wireless network using the WISP client router (wireless WAN) feature, see WISP Mode.  To establish Wireless Distribution System and extend your wireless network, see WDS. Tip ---------------------------------------------------------------------------------------- If "Disable" is selected, the wireless extender feature will be deactivated. ------------------------------------------------------------------------------------------------
High Power Wireless AC1200 Dual Band Router 43 Universal Repeater Mode Universal Repeater: Use this universal repeater mode to extend your existing wireless network. The application scenario is shown in the figure below: In this mode, you only need to configure the following settings on the Tenda wireless router:  Configure LAN IP: Specify an IP address that is in the same subnet as yet different from the remote wireless router for this Tenda wireless router.  Universal Repeater: Configure this router to bridge the remote wireless router for extended network coverage. Tip -------------------------------------------------------------------------------------- Before you start, make sure you have the following information: 1. Remote router's SSID, security mode, cipher type and security key. 2. Remote router's LAN IP address. 3. No Ethernet cable is connected to the Tenda wireless router's WAN port. ------------------------------------------------------------------------------------------------
High Power Wireless AC1200 Dual Band Router 44 Universal Repeater Application Example: Assuming the remote wireless router has the following information: SSID：Tenda_0FF02D Security Mode: WPA-PSK Cipher Type: AES Security Key: 12345678 LAN IP Address: 192.168.0.1 Configuration Procedures: ① Click Network -> LAN to configure an IP address that is in the same subnet as yet different from the remote wireless router for this Tenda wireless router. ② Click OK in the appearing screen. ③ Select Universal Repeater and click Open Scan.
High Power Wireless AC1200 Dual Band Router 45 ④ Select the remote router's wireless network (SSID) and click Close Scan. ⑤ The SSID, channel, MAC address, security mode and cipher type of the remote router will be added automatically on this page. You only need to enter the security key and click Save.
High Power Wireless AC1200 Dual Band Router 46 Note ------------------------------------------------------------------------------------- 1. This router's primary SSID will automatically change to match that of the remote router when the Universal Repeater feature is configured successfully. Please do not change this SSID. Changing this SSID may interrupt the wireless bridge link. 2. When the Universal Repeater is configured successfully, wireless clients need to join this Tenda wireless router's SSID for Internet access. ------------------------------------------------------------------------------------------------ Verify Bridge Connectivity: ① Connect your PC to this Tenda wireless router via a wired or wireless connection and set it to "Obtain an IP address automatically". If you are not clear, see Appendix 1 Configure PC TCP/IP Settings. ② Wait until your PC successfully obtains an IP address.
High Power Wireless AC1200 Dual Band Router 47 Last number differs from that of the remote wireless router's LAN IP address. This is the remote router's LAN IP address.
High Power Wireless AC1200 Dual Band Router 48 ③ Click Start ->Ｒｕｎ． ④ Enter cmd and click OK. ⑤ Enter "ping default gateway IP address”. Here in this example, enter "ping 192.168.0.1" and press Enter. If you see a similar screen (highlighted area), the bridge is established successfully.
High Power Wireless AC1200 Dual Band Router 49 WISP Client Router Mode WISP Mode: This is the WISP (Wireless Internet Service Provider) Client Router Mode. In this mode the router acquires Internet access from your WISP AP or a wireless Access Point on an existing network. Below shows the typical topology: In this mode, you only need to configure the following settings on the Tenda wireless router:
High Power Wireless AC1200 Dual Band Router 50  WISP Mode Setup: This mode establishes a wireless connection between the wireless LAN interface of the remote wireless router and the wireless WAN interface of your Tenda wireless router.  Internet Setup: Configure this Tenda router to access Internet. Tip--------------------------------------------------------------------------------------- Before you start, make sure you have the following information: 1. Remote router's SSID, security mode, cipher type and security key. 2. Internet connection information provided by the remote wireless router. 3. No Ethernet cable is connected to the Tenda wireless router's WAN port. ------------------------------------------------------------------------------------------------ WISP mode (Wireless WAN feature) Application Example: Assuming the remote wireless router provides the following information: SSID: Tenda_home Security Mode: WPA-PSK Cipher Type: AES Security Key: 12345678 Internet Connection Type (for client): DHCP (dynamic IP) Configuration Procedures:
High Power Wireless AC1200 Dual Band Router 51 ① Click Network -> WAN to configure the Internet connection.
High Power Wireless AC1200 Dual Band Router 52 ② Click Wireless -> Wireless Extender, select WISP Mode and click Open Scan. ③ Select the remote router's wireless network (SSID) and click Close Scan.
High Power Wireless AC1200 Dual Band Router 53 ④ The SSID, channel, MAC address, security mode and cipher type of the remote AP will be added automatically on this page. You only need to enter the security key and click Save. ⑤ Click Reboot on the appearing screen to reboot the router.
High Power Wireless AC1200 Dual Band Router 54 ⑥ System automatically enters the home page (Quick Internet Setup screen) after reboot. Click the Advanced button there. ⑦ Click Status -> WAN Status to check the WAN status.
High Power Wireless AC1200 Dual Band Router 55 ⑧ If the WAN Connection Status keeps displaying "Connecting....", change the LAN IP address of this router to a different subnet from the remote router's LAN IP address. ⑨ Click OK on the appearing screen to reboot the router.
High Power Wireless AC1200 Dual Band Router 56 ⑩ Click Reboot on the appearing screen to reboot the router. System automatically enters the Status screen after reboot. Check the WAN Connection Status, if it displays "Connected", you have successfully connected to Internet.
High Power Wireless AC1200 Dual Band Router 57 Note ------------------------------------------------------------------------------------- 1. This router's primary SSID will automatically change to match that of the remote router when the WISP (client router) mode feature is configured successfully. Please do not change this SSID. Changing this SSID may interrupt the wireless link. 2. When the WISP (client router) mode is configured successfully, wireless clients need to join this Tenda wireless router's SSID for Internet access. ------------------------------------------------------------------------------------------------ Verify Bridge Connectivity: ① Connect your PC to this Tenda wireless router via a wired or wireless connection and set it to "Obtain an IP address automatically". If you are not clear, see Appendix 1 Configure PC TCP/IP Settings. ② Wait until your PC successfully obtains an IP address. Last number differs from that of this Tenda router's LAN IP address. This is the LAN IP address of this Tenda router.
High Power Wireless AC1200 Dual Band Router 58 ③ Click Start ->Run ④ Enter cmd and click OK.
High Power Wireless AC1200 Dual Band Router 59 ⑤ Enter "ping Tenda router's gateway IP address"． Here in this example, enter "ping 192.168.0.1" and press Enter. If you see a similar screen (highlighted area), the bridge is established successfully. WDS Mode WDS (Wireless Distribution System) includes Wireless Bridge and Wireless AP. The differences are described as below: Operating in Wireless AP mode, clients can access Internet by connecting to the router via an Ethernet cable or wirelessly. Operating in Wireless Bri dge mode, clients can access Internet by connecting to the router via an Ethernet cable or wirelessly joining the router's secondary SSID (wireless network) or guest network. WDS: Wireless distribution system (WDS) is a system enabling the wireless interconnection of access points in an IEEE 802.11 network. It allows a wireless network to be expanded using multiple access points without the traditional requirement for a wired backbone to link them. The Tenda wireless router can function as a base station AP to create a wireless network or as a repeater AP to repeat and extend the base station AP's wireless network to a farther and wider
High Power Wireless AC1200 Dual Band Router 60 range. The following figure shows an application scenario. In this mode, you must set up both the base station AP, and the repeater AP. Tip--------------------------------------------------------------------------------------- Before you start, verify the following: 1. Tenda wireless router 1 that functions as a base station AP has successfully connected to Internet. 2. No Ethernet cables are connected to the WAN ports of the repeater APs: Tenda wireless routers 2 and 3. ------------------------------------------------------------------------------------------------ WDS Application Example (as shown in the application scenario above): Step 1: Configure Base Station AP (Tenda Wireless Router 1)
High Power Wireless AC1200 Dual Band Router 61 ① Mode: Select WDS Mode. ② WDS Mode: Select Wireless AP. ③ SSID: Customize a SSID, for example, Tenda_home. ④ Channel: Specify a channel for the base station AP to operate on, for example, 2437MHz (Channel 6). ⑤ Remote MAC Address: Manually enter the MAC addresses of the two remote repeater APs (You can click Open Scan to view the MAC addresses). ⑥ Security Mode: Specify security mode/authentication type, cipher type and security key for the base station AP. ⑦ Click Save to save your settings. ⑧ Click Network -> DHCP Server on the base AP's configuration interface to enable the DHCP server.
High Power Wireless AC1200 Dual Band Router 62 Step 2: Configure Repeater AP (Tenda Wireless Router 2) ① Click Network -> LAN to specify a LAN IP address that is in the same subnet as yet different from the base station AP. Click OK in the appearing screen. ② Click Wireless -> Wireless Extender, select WDS Mode from the Mode drop-down
High Power Wireless AC1200 Dual Band Router 63 list, select Wireless AP from the WDS Mode drop-down list and then click Open Scan. ③ Search for and select the base station AP's SSID and then click Close Scan.
High Power Wireless AC1200 Dual Band Router 64 ④ The SSID, channel, MAC address, security settings except security key of the base station AP will be automatically added to the corresponding fields. You only need to enter the security key of the base station AP and click Save.
High Power Wireless AC1200 Dual Band Router 65 ⑤ Click Network -> DHCP Server, disable the DHCP server there and then click Save. Step 3: Configure Repeater AP (Tenda Wireless Router 3) ① Click Network -> LAN to specify a LAN IP address that is in the same subnet as yet different from the base AP and the other remote AP.
High Power Wireless AC1200 Dual Band Router 66 ② Click OK in the appearing screen. ③ Click Wireless -> Wireless Extender, select WDS Mode from the Mode drop-down list, select Wireless AP from the WDS Mode drop-down list and then click Open Scan. ④ Search for and select the base station AP's SSID and then click Close Scan.
High Power Wireless AC1200 Dual Band Router 67 ⑤ The SSID, channel, MAC address, security settings except security key of the base station AP will be automatically added to the correspo nding fields. You only need to enter the security key of the base station AP and click Save.
High Power Wireless AC1200 Dual Band Router 68 ⑥ Click Network -> DHCP Server, disable the DHCP server there and then click Save. Note -------------------------------------------------------------------------------------- 1．To set up a wireless network with WDS, both access points must be WDS capable. 2．This router's primary SSID will automatically change to match that of the remote router when the WDS feature is configured successfully. Please do not change this SSID. Changing this SSID may interrupt the wireless bridge link. 3． When the WDS is configured successfully; wireless clients need to join this Tenda wireless router's SSID for Internet access. ------------------------------------------------------------------------------------------------ Verify Bridge Connectivity: ① Connect your PC to this Tenda wireless router via a wired or wireless connection and set it to "Obtain an IP address automatically". If you are not clear, see Appendix 1 Configure PC TCP/IP Setting. ② Wait until your PC successfully obtains an IP address.
High Power Wireless AC1200 Dual Band Router 69 Last number differs from that of the remote wireless router's LAN IP address. This is the remote router's LAN IP address.
High Power Wireless AC1200 Dual Band Router 70 ③ Click Start ->Run． ④ Enter cmd and click OK. ⑤ Enter "ping default gateway IP address"．Here in this example, enter "ping 192.168.0.1" and press Enter. If you see a similar screen (highlighted area), the bridge is established successfully.
High Power Wireless AC1200 Dual Band Router 71 3.5 Access Control Specify a list of devices to "Permit" or "Forbid" a connection to your wireless network via the devices’ MAC Addresses. Click Wireless -> Wireless Access Control to enter the configuration screen. There are three options available: Disable, Deny Access to Wireless Network and Allow Access to Wireless Network.
High Power Wireless AC1200 Dual Band Router 72 A. If you want to allow all wireless clients to join your wireless network, select Disable. B. If you want to allow ONLY the specified wireless clients to join your wireless network, select Allow Access to Wireless Network. C. If you want to disallow ONLY the specified wireless clients to join your wireless network, select Deny Access to Wireless Network. Wireless Access Control Application Example: To only allow your own notebook at the MAC address of C8:3A:35:C2:CA:E7 to join your wireless network (SSID：Tenda_home) Configuration Procedures: ① Select the wireless band you wish to use, for example 2.4Ghz. ② Click Enable. ③ Select Allow Access to Wireless Network. ④ Click Add.
High Power Wireless AC1200 Dual Band Router 73
High Power Wireless AC1200 Dual Band Router 74 ⑤ Select or enter your wireless MAC address and click Save. ⑥ Below screen will then appear. Tip ---------------------------------------------------------------------------------------- 1. Up to 16 wireless MAC addresses can be configured. 2. If you don't want to configure the complex wireless security settings and want to disallow others to join your wireless network, you can configure a wireless access control rule to allow only your own wireless device. ------------------------------------------------------------------------------------------------
High Power Wireless AC1200 Dual Band Router 75 3.7 WPS Setup Click Wireless -> WPS to enter WPS screen. Wi-Fi Protected Setup makes it easy for home users who know little of wireless security to establish a secure wireless home network, as well as to add new devices to an existing network without entering long passphrases or configuring complicated settings. Simply enter a PIN code or press the software PBC button or hardware WPS button (if equipped) and a secure wireless connection can be established. A． If your wireless network is not secured, you can use the WPS to quickly encrypt your wireless. B． If your wireless network is secured with WPS, you can quickly join your wireless network with a WPS capable adapter (Only WPA2-PSK and Mixed WPA/WPA2-PSK are supported). You can use WPS PBC or WPS PIN to establish a secure connection.  PBC: Establish WPS connection using the the software PBC button or hardware WPS button (if equipped).  PIN: Establish WPS connection using the PIN code. To secure a wireless network with WPS Knowledge Center ------------------------------------------------------------------ 1. Reset OOB: If clicked, the device's SSID and security mode will become unconfigured so that WPS can reconfigure the device's SSID, security settings. When the action of Reset OOB completes, the device's SSID will be restored to factory default, and security mode will be disabled (none). ------------------------------------------------------------------------------------------------

Navigation menu