TESONIC MVEB Bluetooth Earphones User Manual

TESONIC INTERNATIONAL (HK) LTD. Bluetooth Earphones

User manual

User ManualBasic Specifications■ Size: 31x28x9mm■ Weight: 17.2g (Aluminum Materials)■ Charging port: Micro USB■ Keys: 3 (MFB button, volume+/forward button , volume- /backward button,)■ Battery: Rechargeable lithium polymer battery 3.7V; 120mAh■ Charging Specifications: DC 5V/80~120mA■ Charger Output: 5V/0.5 ~ 1.0A■ Charge Indicator: Red LED light (Charging) / Blue LED light (Charging completed)■ Standby time: 120 hours■ Talk time: up to 5 hours■ Music time: up to 6 hours■ Charging time: 2-3 hours■ Volume control / Variable for per stage : Stage 16 / 1.5dBvariablefor per stage.■ Operating temperature: Charging 0 ~ 40 ℃, charging than -20 ~ 60 ℃.■ Storage temperature : -40 ~ 80 ℃.Speaker and MIC parameters■ Speaker Specifications / mode : Φ15.4mm, Dynamic■ Magnet type:Nb-Fe-Be■ Distortion:Below 0.3%■ Impedance:32Ω/typ■ Frequency Frequency (Hz): 20Hz ~ 20KHz■ MIC style: Capacitive■ MIC Sensitivity : -42 ± 3dB,Φ6.0mm
Bluetooth Parameters■ Bluetooth version: 4.1+EDR■ Support Profile: HSP, HFP, A2DP, AVRCP■ The remote control to speaker: MFB ( Power ON / Power Off / Play / Pause) ;Vol+/Next song,Vol-/Previous song.■ Device Name: S-1■ Pass: 0000■ RF transmitter: class II (-6dBm ~ +4 dBm)■ Receive sensitivity:-92dBm■ Transmission Range (Hz): 2.40GHz ~ 2.48GHz■ Transmission distance: 10mOperating Instructions:Power On:When the headset is off, press and hold the Multi-Function Button (MFB) for 2 seconds.The LED indicator will flash slowly in blue.The headset will be paired with the lastconnected bluetooth device or mobile phone automatically when turned on.Power Off:When the headset is on, press and hold the MFB for 4 seconds. The LED indicator willflash slowly in red. The headset will disconnect from your phone devices when turned off.Pairing Mode:When the headset is off, press and hold the MFB for 5 seconds until the LED indicatorflashes red and blue in alternating colors.Note: If you release the MFB before the headset goes into pairing mode, it will power onand connect with the last paired device. If you want to pair the headset with a new phonedevice, please power off the headset and enter into pairing mode.Easy Connect FunctionIf the headset doesn’t connect with any phone when it’s on, you will need to enter theheadset into pairing mode by pressing volume- and volume+ concurrently.Answering CallsIf a call comes in when listening to music or headset is standing by, press the MFB toanswer the incoming call.If the music is playing, it will pause automatically during the call.After finishing your call, the music will start playing automatically.Reject CallsIf a call comes in when listening to music or headset is standing by, press and hold theMFB for 2 seconds to reject the call.End Calls
Press the MFB to terminate a phone call.If you are listening to the music previously,it willrestart again.VolumeTo adjust the volume when talking on the phone, press the volume+ or volume- to makevolume go up or down. When you reach the max/min volume, you will hear a warningtone.Last Number RedialWhen listening to music or headset is standing by, double click the MFB to redial the lastnumber. If you are listening to music, it will pause automatically during the call.Voice-Command DialIf your mobile phones supports this function, press and hold MFB for 2 seconds to activatevoice command. By re-pressing and re-holding MFB for 2 seconds during the voice dialmode, voice dial will be canceled.Note: Please refer to the manual of your mobile phone for voice-command dial support.MuteWhen talking on the phone, press and hold volume+ or volume- for 2 seconds to muteyour microphone. You will hear the caller, but the caller will not to hear you.Note: There will be a warning tone every 3 seconds, reminding you that you are in mutemode.Quit MuteHold volume+ or volume- for 2 seconds to exit mute mode.Switching Between Your Mobile Phone and HeadsetWhen talking on the phone, double-click the MFB to switch the voice from your headset toyour mobile phone. By double clicking the MFB again, the voice will switch back to theheadset.ReconnectWhen the headset and mobile phone are disconnected, press the MFB to reconnect.Note: Some devices may have a prompt screen, that will ask you if you would like to pairyour device.Pause and Restart MusicWhen listening to music, click MFB to pause music and click MFB again to restart music.Play Previous SongPress volume- to play previous song.Play Next Song
Press volume+ to play next song.Connect with 2 Mobile PhonesA. First disconnect the Bluetooth device from your phone if it is already connected.B. Press volume+ and volume- concurrently to put the headset in pairing mode.C. Turn on and search Bluetooth device onyour second phone until your find“S-1” and select to begin pairing.D. Please pair again with your first mobile phone device.E. Now you should have two mobile phones connected with the headset.Transfer CallsWhen you’re talking on the phone and receive another incoming call, press the MFB for 2seconds to reject the incoming call. If you click V+ and V- concurrently, you will receive theincoming call. Your first call will be placed on hold. When you click V+ and V-concurrently again, you will switch back to your first call. You should hear a beep. Duringthis time your second call will be placed on hold. You can also end the call by clicking theMFB.Note: This operation requires that your mobile phone supports the call waiting feature.Working temperature: 0～+45℃Storage temperature: -10～60℃LED Indicator StatusChargingRed LED LightCharging CompleteBlue LED LightPower On (Connected)Blue LED light flashes once every 3 secondsPower On (Talking)Blue LED light flashes twice every 4 secondsPower On (Incoming Call)Blue LED light flashes continuouslyMusic PlayingBlue LED light flashes twice every 4 secondsPower On (Not Connected)Blue LED light flashes once every 5 secondsBattery LowRed LED light flashes once every twenty secondsPairing ModeLED light flashes in red and blue alternately
RF Exposure Information and StatementThis equipment complies with FCC radiation exposure limits set forth for an uncontrolledenvironment. This equipment should be installed and operated with minimum distance of 20 cmbetween the radiator and your body. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subjectto the following two conditions: (1) this device may not cause harmful interference, and (2) thisdevice must accept any interference received, including interference that may cause undesiredoperation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage est susceptible d'en compromettre le fonctionnement.NOTE: The manufacturer is not responsible for any radio or TV interference caused byunauthorized modifications to this equipment. Such modifications could void the user’s authorityto operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generatesuses and can radiate radio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one or moreof the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.-Consult the dealer or an experienced radio/TV technician for help- This device and its antenna(s) must not be co-located or operating in conjunction with any otherantenna or transmitter.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subjectto thefollowing two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesiredoperation.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radioexemptsde licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si lebrouillage estsusceptible d'en compromettre le fonctionnement.(i) Ce dispositif doit être installé et exploité dans une enceinte entièrement fermée afin de prévenirlesrayonnements RF qui pourraient autrement perturber la navigation aéronautique. L’installationdoit êtreeffectuée par des installateurs qualifiés, en pleine conformité avec les instructions du fabricant.(ii) Ce dispositif ne peut être exploité qu'en régime de non-brouillage et de non-protection,c’est-à-direque l’utilisateur doit accepter que des radars de haute puissance de la même bande de fréquencespuissent brouiller ce dispositif ou même l’endommager. D’autre part, les capteurs de niveau àproposdesquels il est démontré qu’ils perturbent une exploitation autorisée par licence de fonctionnementprincipal doivent être enlevés aux frais de leur utilisateur.

Navigation menu