TIC Audio AMP100 Outdoor Wifi&Bluetooth; Receiver-Amplifier User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3948707
Application ID	UhzxosIu3Z3XHrFIlb8hWg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	154.04kB (1925483 bits)
Date Submitted	2018-08-02 00:00:00
Date Available	2018-08-02 00:00:00
Creation Date	2018-08-02 15:53:36
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2018-08-02 15:53:36
Document Title	Users Manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Stephan Huck

11(6))
:I
g:
> W
'0
I—‘
A E
‘1} 11‘
Table of Content
Front Panel .......................................................... 3
Rear Panel ............................................................ 4
Wiring Diagram .................................................... 5
Operation .............................................................. 6
WifiStream Operation ........................................... 7
Main Screen
Device List Screen
Troubleshooting
Specifications
Warnings & Notes
Front Panel Rear Panel
@ ©
6 a) sPEAKERouu smeaoura a};
e . g a,
\_'i v ‘
® ® ® ® ®
(3 power button
® input button ® left AUX Input (white RCA)
@ wifi/bluetooth reset/connect button @ right AUX input (red RCA)
volume E dial
® . . / Q . ® Speaker zonerutput terminals
(9 Wm mode Indicator
bluetooth mode indicator @ Speaker zone B output terminals
® AUX mode indicator 69 power adapter connection
volumeindicator
@ treble EQindicator ® bluetooth antenna
bass EQindicator ® wifi antenna
Wiring Diagram
SPEAKER our A semen our 9
@'@
NOTE:
1. Please ensure that wire polarity (+ & -) matches between amplifier and speakers.
2. AMP-100 does not support bridged output.
Operation
Input Modes
AMP-100 has 3 different mode: Wif, Bluetooth, and AUX line in. Clicking on the input button
will toggle among the 3 modes, as indicated by the LED above the button. When a mode is not
in use, the connection is shut off and has to be reconnected when selected again. Both Wiii and
Bluetooth connection will reconnect automatically when within range.
Power Supply
The power supply provided is rated for outdoor use. However, please ensure that the electrical
outlet where the power adapter is plugged into is covered during use in wet weather. Please
unplugthe adapter from the outlet when not in use or there is a possibility for rain or snow.
In addition, the transformer should not be left in a location where it can be submerged in water.
Antenna
The two provided antennas should be installed before first use. There is no differenoe between
the two antennas. Each antenna can be screwed into either Will or Eluetooth slot.
VolumeiEQ ad'ustment
The dial adjusts the volume, treble, and bass level of the output. Pressing the dial will switch
among adjusting volume, treble, and bass, as indicated by the LED above the dial. Turning it
clockwise/counter-clockwise will increase/decrease the level respectively. The LED will blink
once at the minimum level, twice in the midle, and three times at the maximum level.
Bluetooth connection
First select Bluetooth as input While the LED is flashing, go to the your device's Bluetooth
setting menu and look for "TIC AMP-100 Amplifier". Once the device is connected. the LED will
remain solid. You can hold the reset button for 2 seconds to disconnect any connected device.
The LED will start blinking again. Vou can initiate a full reset and delete all stored BT devices by
holding the reset button for over 5 seconds.
WifiStream Operation
WfiSetup
In order to use this amplifier, you must download the TlC WifiStream
app on the Apple App Store or Google Play. Search for "TlC
WifiStream" in the respective store. Alternatively, follow this QR code
(or go to www.ticcorp.com/wifistrearn) for download links and
additional help for installation and operation.
The TIC WifiStrearn app contains step»by»step instruction on how to connect your amplifier
to your Wifi network. The supplemental instruction below is provided for your convenience.
In order to connect the amplifier to your wifi network, your smartphone or tablet device
must be connected to the same network. This amplifier is only compatible with 2.4G band,
not 5.86 band. Please ensure you are using the 2.46 signal for any multi-oancl router.
During the initial set up, we recommend that you move the amplifier close to the router.
While not required, it will provide the fastest and most seamless set up. However, it is
required that the amplifier is close to the phone/tablet you are using during the setup.
Please note it will take 10-20 seconds to boot up the Wifi system. Vou will hear a musical
phrase once the ampli er is ready to connect and operate. In order to minimize wireless
interference and maximize energy efficiency, the Wifi signal is shutoff when in Bluetooth or
AUX mode. The Wifi system has to boot up each time the mode is selected. The amplifier is
not optimized for constant switching among different input modes but for maximum
performance and efficiency
App Overview
The TIC WifiStream app is required to set up the amplifier and maintain AirPlay capability.
Music can be streamed to any WifiStream device via the app or AirPlay. The app must be
installed on each device that uses the amplifier via AirPlay.
Streaming via AirPlay provides the most seamless experience and the widest range of
compatibility. On Apple devices, you can directly choose the amplifier as the output device
in most native media apps/services (ie. Pandora, Apple Music, Amazon Music, Spotify,
YouTube, Tuneln Radio etc.) under the Aerlay icon.
Android devices may take advantage of AirPlay capability via thirdrparty apps/services.
Additional cost may be applied and service is not guaranteed.
Main Screen
Settiing Menu Service Device List
TIC Amplifier
Service Icon
ESi‘N Radio
Favorite Playlist
nn rm
Music Control
Setting Menu — access music services, favorite, and playlists
Service — access service-specific menu Kt control
Device List — multiaroom and device control
Service Icon — icon to denote current service (nonrclickable)
Favorite — add/delete favorite (local or servicerspecific if applicable)
Playlist — view playlist [local or service’specific if applicable)
Music Control — repeat, back, play/pause, forward/scan, volume control
Device List Screen
Back ( DEv‘lCE Lisi‘ Add WifiStream Device
Palm 5; IRA“ : SpeakerSetfing
lE‘
Channel Setting
Volume Control
rim, imm
l‘r it. mm ml in mi .
.i.
our
Multi-room Control
Instruction Hint
F'niise mi Play/Pause All
Add WifiStream Device — access wifi setup wizard to add more speakers
Speaker Setting — rename speaker & misc speaker setting
Channel Setting - switch output channel (stereo, left-only, or right-only)
Instruction Hint‘ click to see how to set up multi-room groups'
‘ You can group speakers by dragging a ”grouped” speaker into a ”main" speaken
Ungroup by dragging a ”grouped” speaker to the bottom half Once a group is formed,
only the ”main" speaker can be selected in any AirPlay menu. While volume can be
customized individually, speakers in the same group will play content in sync.
Troubleshooting
Issue: Amplifier not connecting to wifi network
Check that wifi mode is selected and the wifi system is ready (may take ”'20 secondsto boot up],
Check ifthe wili network 5le & password is correct and the network you are using is 2,46, not 5.86,
Make sure phone/tabletand amplifier are close to each other during setup.
Amplifier may be out ofwifi range of router, Try moving it closer to router,
Check ifthe router’s internetconnection is active
Hold the wifi reset button until factory default setting is restored and rerun wifi setup wizard,
Issue: Amplifier not connecting to Bluetooth
. Check that Bluetooth mode is selected.
~ Bring Bluetooth device closer to amplifier
~ Hold the Bluetooth reset button lur 5+ seconds and try reconnectingthe Bluetotooth device.
Issue: Audio does not play
Check power is turned on.
Check that the correct input mode is selected and the input device is connected and playing music,
Unmute or turn up volume on amplilier. app and phone/tablet
Check wire connection to loudspeakers is not interrupted and polarity is correct,
If music stops suddently and the power button LED is offwhile an input mode LED is lit, protection
mode is triggered. Simply turn off amplilier for 5 minutes and restart amplifier. Frequent protection
mode triggers may indicate an impedance mismatch in your loudspeaker system,
~ (Forwifi mode via WifiStream app] In device list screen, make sure multi-room group setting is
correct. The wrong speaker maybe chosen.
For additional help. please visit the support & contact us section of our website at
www.ticcorp.comt
10
Specifications
Output Power:
Impedance Range:
Inputs:
Bluetooth Version:
Wifi Band:
Frequency Response:
Input Power:
Cabinetry Material:
lngress Protection Rating:
4 x 50W RMS@80
4-160
Wifi, Bluetooth, AUX line-in
4.2
2.46
ZOHZ - ZOkHZ
DCZ4V 100W
Aluminum
IP64
11
Warnings & Notes
lMPDRTANTSAFETY INSTRUCiIONS
Read thae irlstmctions.
Keep and lollow all instructions.
Heed all warnings.
For indoor products, do not use this apparatus near water. For outdoor products, please do not expose
apparatus to water larger than its intended time and level.
5. Clean only with a dry cloth.
a. Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus
(includiru amplifiers) that produce heat.
7. Do not block any ventilation openings. Install this apparatus in accordance with the manulacturer’s
instructions.
8. Do not deleat the salety purpose ol the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A gmund-type plug has two blades and a third grounding prong. The wide blade or the
third prong is provided lot your salety. ll the provided plug does not fit into youroutlet, consult an electrician lor
replacement of the obsolete outlet.
9. Protect the power cord lroln being walked on or pinched, particularly at plugs. convenience receptacles and
the point where they exit tram the apparatus.
10. Use only attachments and accessories specified by the manulacturer.
11. Unplug this apparatus during lightning storms or when unused for long periods of time.
12. Rater all servicing to qualilied service personnel. Servicing is required when the apparatus has been damaged
in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have tallen
into the apparatus, or the apparatus had been exposed to rain or moisture, does not operate normally or has been
dropped.
13. Do not expose this apparatus to dripping or splashing and ensure that no objects filled with liquids. such as
vases, are placed anthe apparatus.
14. To disconnect this apparatus train the AC mains completely, disconnect the power supply cord plug trom the
A: receptacle.
15. The mains plug of the power supply cord shall remain readily operable.
16. Do not expose batteries to extessille heat such as sunshine, fire, or the like.
17. This is not a children's product and is not intended for use by children under 14 years old.
PPN!"
SOUNDWARNING
Avoid hearing damage by establishing sate listening volumes. Listening to this product at high volumes or tor
extended time periods may cause permanent hearing loss. Protect your hearing by establishing sale volumes. Start
with the volume setting controt at its lowest setting. Slowly increase the volume until you can hear it comfortably
and clearly without distortion. iteduce the volume or stop listening it you experience ringing in your ears or any
discomfort. Consult with a physician ifneeded.
12
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmrul interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user‘s authority to operate the equipment,
Note 1:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful Interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
' Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note 2:
1. Changes or modifications to this unit not expressly approved by the party responsible ror
compliance oould void the user’s authority to operate the equipment.
2. This equipment should be installed and operated with a minimum distance of 20 cm between
the device and your body.
13
WARRANTV
TlC offers a limited one-year iull pans and labor warranty for all of our new products.
Please visit rlc’s warranty page (http://www.ticcorp.com/warranty/l for detail to our latest warranty policy.
TRADEMARK
Apple and the Apple logo are trademarks of Apple Inc, registered in the us. and other countries. App Store is a
service marlr oiApple Incr, repstered in the us. and other countries.
Google Play and the Googie Vlay logo are trademarks of Geogle LLC.
The Bluetooth‘ word mark and logos are registered trademarks owned bythe Bluetooth sic, Inc. and any use of
such merits by [licensee name] is under license. Other trademarks and trade names are those of their respective
owners.
TIC Audio IM. All rights reserved. The TlClogo is a trademark uiTIC Audio Inc, registered in the United States.
Features, specifications, and appearance are subiett to change without notice.
For more information, please visit our website: www.ticcorp,com.
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Stephan Huck
Create Date                     : 2018:08:02 15:53:36+08:00
Modify Date                     : 2018:08:02 15:53:36+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Format                          : application/pdf
Creator                         : Stephan Huck
Title                           : <414D502D313030CAB9D3C3CBB5C3F7CAE92E706466>
Document ID                     : uuid:0d044190-c156-451f-9984-1352250a8dff
Instance ID                     : uuid:ee2c6624-bfec-4077-8250-27f90e12fb44
Page Count                      : 8

EXIF Metadata provided by EXIF.tools