TIC Audio BD1 Bluetooth Speaker User Manual MINI380

TIC Audio Inc Bluetooth Speaker MINI380

15_BD1 UserMan,r1

User ManualC ookieBC
Cookie Please follow the instruction in this guide to enjoy the best sound.
User ManualC o o ki e
Hold "O" button to power on and offPress "O" button to play/pause music(for compatible bluetooth device/app)
TIC Coo kiePress "O" button for 2 seconds to activate Bluetooth discovery mode.Quickly press "O" button twice to disconnect existing Bluetooth connection and return to discovery mode.
Use "line in" to connect any audio device via a 3.5mm cable. Speaker will automatically switch to AUX mode if a device is connected. Speaker will automatically switch back to Bluetooth mode once the device is disconnected.Use "line out" to output music to any headphone or audio receiver. The speaker will work as a Bluetooth receiver whenconnected. The speaker will be muted when a headphone/receiver is connected to the "line out".
While connected to a smartphone in Bluetooth mode, you can short press the "O" button to answer any incoming call and longpress the "O" button to refuse. While talking, short press the "O"button to end the call.
Press the buttons to decrease or increase volume.
Connect speaker via USB cable to any power source (USB charger, powerbank, laptop, etc.) to charge battery.
You can conveniently mount thespeaker on any flat metallic surfaceusing the magnetic mount on theback of the speaker.Magnetic Mount
Cookie/BD18W4.8" 1.6" 2.0 StereoAudio out for headphone or receiver3.5mm AUX INBattery Capacity:2200mAhProduct: Bluetooth Speaker1A
1)Read these instructions.2)Keep and follow all instructions.3)Heed all warnings.4)For indoor products, do not use this apparatus near water. For outdoor products, please do not expose apparatus to water longer than its intended time and level. The apparatus is no longer water resistant if the charging/connection port cover is opened. Please ensure the port cover is closed tightly if used near water.5)Clean only with a dry cloth.6)Do not install this apparatus near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat.7)Do not block any ventilation openings. Install this apparatus in accordance with the manufacturer's instructions.8)Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A ground-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.9)Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.10)Use only attachments and accessories specified by the manufacturer.11)Unplug this apparatus during lightning storms or when unused for long periods of time.12)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, or the apparatus had been exposed to rain or moisture, does not operate normally or has been dropped.13)Do not expose this apparatus to dripping or splashing, and ensure that no objects filled with liquids, such as vases, are placed on the apparatus.14)To disconnect this apparatus from the AC mains completely, disconnect the power supply cord plug from the AC receptacle.15)The mains plug of the power supply cord shall remain readily operable.16)Do not expose batteries to excessive heat such as sunshine, fire, or the like.17)This is not a children's product and is not intended for use by children under 14 years old.CAUTION:Risk of Electric Shock. Do Not Open.The lightning flash with an arrowhead symbol, within an equilateral triangle, is intended to IMPORTANT SAFETY INSTRUCTIONS:
FCC WarningThis device complies with Part 15 of the FCC Rules. Operation is subject to the following twoconditionswhile port cover is opened for charging or connection.
(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may causeundesired operation. Changes or modifications not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.Note 1: This equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonableprotection against harmful interference in a residential installation. This equipment generates,uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which the receiver isconnected.—Consult the dealer or an experienced radio/TV technician for help.Note 2: 1.Changes or modifications to this unit not expressly approved by the party responsiblefor compliance could void the user’s authority to operate the equipment.

Navigation menu