TIT ENG NL200 CARD LAMINATOR User Manual Users manual

TIT ENG Co.,Ltd. CARD LAMINATOR Users manual

Contents

Users manual

Contents Safety Precautions 05 Getting Started 08Product Overview 08Buttons 3802 ©2017 T.I.TENG Co., Ltd. All rights reserved 03POINTMAN LAMINATOR NL200 User Manual Button Control & Menu 38In the Box 09 Names of Parts 10NL200 (Dual-sided Printing) 10 12NL200H (Dual-sided printing, Card Input Hopper) 14 16 Open Front Cover 18 Close Front Cover 19 Load Upper Cleaning Roller & Films 20Load Upper Cleaning Roller 20Load Films to Upper Cartridge 22 Load Lower Cleaning Roller & Films Load Cards 24 28Load lower Cleaning RollerPlace cards in the Input hopper 24 28Load Films to Lower CartridgeLoad Cards after taking out the Card Input Hopper 26 29 Load/Unload Card Stacker to Laminator 31Load Card Stacker to Laminator 31Remove Cards after Taking Out Card Stacker 32Remove Cards without Taking Out Card Stacker 33 Connect Power & Communication Cables 34Connect Power Cable 34Connect Communication Cable 34 Power On Card Input Hopper Lock 35 36 Front Cover Lock 37Pass Mode 39Lamination Temperature (Temper_set) 42Film Position (Start POS set) 44Power Saving Mode (Power saving) 46Path Sensor 48Serial No. (Product_infor) 51Factory Reset (Factory init) 53 Maintenance Instructions 56Supported Cards 56 56 56 56 56① Size② Thickness③ Acceptable Cards④ Unacceptable CardsClean the Exterior 57 Clean the Laminator 57Clean Roller Using Cleaning Card 57Clean the Blue Cleaning Roller 60NL200U (Upper Single-sided Printing)NL200L (Lower Single-sided Printing)
04 ©2017 T.I.TENG Co., Ltd. All rights reserved 05 Laminator Specifications 64Features 64Standard Feature 64 64 64 64 64 65 65 65① Laminating Type② Laminating Function③ Laminating Speed④ Laminating Temperature⑤ Supported Card SizeOptional Specifications 65Laminator Specifications 65 65 65 65 65 65 65 65① Product Dimensions (Width X Length X Height) and Weight1) NL200(Standard)2) NL200 (Standard, Card Stacker)3) NL200H (Standard, Card Input Hopper)4) NL200H (Standard, Card Input Hopper, Card Stacker)② Power Supply③ Interface⑥ Film Patch Dimensions ⑦ Film Patch CapacitySafety PrecautionsBefore using or maintaining the product, please read this manual carefully. Not following the instructions included in this manual may result in fire and injuries such as electric shocks and burns. To prevent any damage to product or person, please read and follow the safety instructions and keep this manual handy for fu-ture reference. We are not responsible for any injuries or damages when the product is not used in compliance with these precautions.- Symbols used in this manualPlease follow the safety instructions indicated as Warning, Caution, Important, Note, Prohi-bition, Electrical Hazard, Fire Hazard and High Temperature.Check the following symbols used for easy understanding:NoteThis is a note that provides more details or information that is useful for users.ImportantUse this information to check and inspect for the proper operation of the product.CautionNot following this warning can cause service interruption or product damage.WarningThese warnings must always be followed; otherwise, this may result in serious injury or damage.High TemperatureIndicates a warning about high temperatures.Fire HazardIndicates a potentially hazardous situation which may result in fire.Electrical HazardIndicates a potentially hazardous situation which may result in electric shock. ProhibitionIndicate a hazardous action which must be avoided at all times. Warranty Certificate 66 Regulatory 67POINTMAN LAMINATOR NL200 User ManualError Messages & Solutions 61 Troubleshooting 61Remove Jammed Card 62 Film Specifications 63Patch-Type Film 63
Do not use a damaged plug or loose outlet.PowerDo not pull the cable to unplug or touch the plug with wet hands.Do not bend the cable by force or place any heavy objects on it.Keep unplugged if not in use for an extended period of time or in case of lightening or thunder.Check whether the power cable is plugged into the outlet completely.The product must be used with AC power with rated label. Please contact us or authorized service representative if you require any assistance.If the product is exposed to rain or liquid, please turn off and unplug the cable, and contact an authorized service representative.The surface of the product may be very hot right after using it. Please leave it for at least 15 minutes before making any contact.Operation/HandlingKeep the power plug clean, away from dust and water.CleaningUnplug when cleaning, and do not spray water or use benzene or thinner.Do not use the product if the power cable is damaged as it may result in electric shock or fire.Do not install the printer in a place where it may be subjected to moisture, dust, or splashes of water (rain).Installation/StorageKeep the printer away from heat sources, as well as lit candles and cigarettes.Keep any flammable liquid, gas, and aerosol away from the printer.Do not place the product where its vent can be blocked or interrupted. Make sure that the product is unplugged when installing it. (The cable may be damaged and cause fire or electric shock.)Do not place metal objects, chemicals, or anything with water on it.Misc.If you observe smoke, odor, or noise from the printer, unplug it immediately and contact your dealer.Do not disassemble, repair, or modify the printer arbitrarily.Do not remove any cover or protective device that is attached with screws.Do not operate the printer while your hand is placed inside.Clean and maintain the printer according to the user instructions.Do not block the air vent on the product as it can cause overheating or fire. Do not install the product as a built-in unit in a place with poor ventilation.Make sure that the power cable is properly arranged for your safety. Do not place the printer in direct sunlight as it may cause a malfunction.Do not place the product on the surface that is not stable (e.g. bed, sofa).06 ©2017 T.I.TENG Co., Ltd. All rights reserved 07POINTMAN LAMINATOR NL200 User Manual
Thank you for purchasing POINTMAN LAMINATOR.This laminator is designed to laminate PVC cards of your specifications by applying special films on Single and Dual sides using halogen heat to prevent duplication. This model can be used for membership cards, employee cards and access cards which need to be secure and should not be duplicated. Up to 500 cards can be laminated on Single and Dual sides as standard and both single and dual-sided lamination is supported. The model features a high-level security lock to prevent unauthorized access to the system and films and users can easily replace the cartridge thanks to the door-type cover. The 4LINE display panel shows information about the system for users. Various types of cards are supported and it can be connected to a card/retransfer printer if required for better user experience and compatibility. - In the BoxAC Power CableUSB CableStacker Cleaning RollerNL200(Dual-sided Printing)Getting StartedPlease make sure that all the components and accessories are included in the box. If there are any missing or damaged items, then please contact your dealer for assistance.Important-Product OverviewNL200U(Upper Single-sided Printing) NL200L(Lower Single-sided Printing)FilmQick Start GuideOPTION 08 ©2017 T.I.TENG Co., Ltd. All rights reserved 09OPTION POINTMAN LAMINATOR NL200 User ManualNL200H(Dual-sided Printing, Card Input Hopper)Card Input Hopper LockOPTION
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual10 11Names of Parts-NL200 (Dual-sided Printing)OPTION Front Cover ButtonOpens the Front Cover.Front CoverOpens the cover to replace the Film and Cleaning Roller.Front Cover LockThe Front Cover can be locked to protect the Film and other parts inside.Power SwitchTurns the laminator on/off.Fan VentCirculates air through the vent.Card EjectorReleases the laminated cards.Card StackerStacks the laminated cards. (max. 150 cards)LCD DisplayDisplays the system status.Menu Navigation ButtonsUsed to navigate the menu.OK ButtonUsed to confirm your choice on the menu.Menu ButtonUsed to enter or exit the menu. (press once: enter, press once on the menu: exit)Name DescriptionUSB PortUsed to connect the laminator and other devices using the USB cable.RS232C PortUsed to connect the laminator and other devices using the RS232C cable.AC Power PortSupplies power to the laminator using the AC power cable.Air VentCirculates air to keep the temperature under control.KnobRotate the knob to remove a jammed card.RFID Antenna CoverUsed to keep the RFID antenna in place.RFID AntennaRead the RFID tag on the film.Upper Film CartridgeUsed to load the films in the upper side. (max. 500 films can be loaded)Cartridge Load/Eject ButtonUsed to remove or replace the cartridge.Lower Film CartridgeUsed to load the films in the lower side. (max. 500 films can be loaded)Card SlotInsert the cards to be laminated.RJ11 PortUsed for connecting to a NUVIA card printer. (communication port)Name Description
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual12 13-NL200H (Dual-sided printing, Card Input Hopper)RJ11 PortUsed for connecting to a NUVIA card printer. (communication port)OPTION Front Cover ButtonOpens the Front Cover.Front CoverOpens the cover to replace the Film and Cleaning Roller.Front Cover LockThe Front Cover can be locked to protect the Film and other parts inside.Power SwitchTurns the laminator on/off.Fan VentCirculates air through the vent.Card EjectorReleases the laminated cards.Card StackerStacks the laminated cards. (max. 150 cards)LCD DisplayDisplays the system status.Menu Navigation ButtonsUsed to navigate the menu.OK ButtonUsed to confirm your choice on the menu.Menu ButtonUsed to enter or exit the menu. (press once: enter, press once on the menu: exit)Name DescriptionUSB PortUsed to connect the laminator and other devices using the USB cable.RS232C PortUsed to connect the laminator and other devices using the RS232C cable.AC Power PortSupplies power to the laminator using the AC power cable.Air VentCirculates air to keep the temperature under control.KnobRotate the knob to remove a jammed card.RFID Antenna CoverUsed to keep the RFID antenna in place.RFID AntennaRead the RFID tag on the film.Upper Film CartridgeUsed to load the films in the upper side. (max. 500 films can be loaded)Cartridge Load/Eject ButtonUsed to remove or replace the cartridge.Lower Film CartridgeUsed to load the films in the lower side. (max. 500 films can be loaded)Card input hopper(Standard)Stores cards to laminate(max. 100 cards)Card Input hopper Lock Used to lock the card Input hopper for SecurityName DescriptionOPTION
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual14 15OPTION Front Cover ButtonOpens the Front Cover.Front CoverOpens the cover to replace the Film and Cleaning Roller.Front Cover LockThe Front Cover can be locked to protect the Film and other parts inside.Power SwitchTurns the laminator on/off.Fan VentCirculates air through the vent.Card EjectorReleases the laminated cards.Card StackerStacks the laminated cards. (max. 150 cards)LCD DisplayDisplays the system status.Menu Navigation ButtonsUsed to navigate the menu.OK ButtonUsed to confirm your choice on the menu.Menu ButtonUsed to enter or exit the menu. (press once: enter, press once on the menu: exit)Name Description-NL200U (Upper Single-sided Printing)USB PortUsed to connect the laminator and other devices using the USB cable.RS232C PortUsed to connect the laminator and other devices using the RS232C cable.AC Power PortSupplies power to the laminator using the AC power cable.Air VentCirculates air to keep the temperature under control.KnobRotate the knob to remove a jammed card.RFID Antenna CoverUsed to keep the RFID antenna in place.RFID AntennaRead the RFID tag on the film.Upper Film CartridgeUsed to load the films in the upper side. (max. 500 films can be loaded)Cartridge Load/Eject ButtonUsed to remove or replace the cartridge.Lower Cartridge CoverUsed to protect the lower cartridge when not in use.Card SlotInsert the cards to be laminated.RJ11 PortUsed for connecting to a NUVIA card printer. (communication port)Name Description
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual16 17OPTION Front Cover ButtonOpens the Front Cover.Front CoverOpens the cover to replace the Film and Cleaning Roller.Front Cover LockThe Front Cover can be locked to protect the Film and other parts inside.Power SwitchTurns the laminator on/off.Fan VentCirculates air through the vent.Card EjectorReleases the laminated cards.Card StackerStacks the laminated cards. (max. 150 cards)LCD DisplayDisplays the system status.Menu Navigation ButtonsUsed to navigate the menu.OK ButtonUsed to confirm your choice on the menu.Menu ButtonUsed to enter or exit the menu. (press once: enter, press once on the menu: exit)Name Description-NL200L (Lower Single-sided Printing)USB PortUsed to connect the laminator and other devices using the USB cable.RS232C PortUsed to connect the laminator and other devices using the RS232C cable.AC Power PortSupplies power to the laminator using the AC power cable.Air VentCirculates air to keep the temperature under control.KnobRotate the knob to remove a jammed card.RFID Antenna CoverUsed to keep the RFID antenna in place.RFID AntennaRead the RFID tag on the film.Upper Film CartridgeUsed to load the films in the upper side. (max. 500 films can be loaded)Cartridge Load/Eject ButtonUsed to remove or replace the cartridge.Card SlotInsert the cards to be laminated.RJ11 PortUsed for connecting to a NUVIA card printer. (communication port)Name DescriptionUpper Cartridge CoverUsed to protect the upper cartridge when not in use.
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual18 19Open Front Cover1. Press the Front Cover Button.2. Once the cover opens slightly, pull the cover by the handle to open it completely.Close Front Cover- Do not force the Front Cover in when the cartridge is not loaded correctly as it can damage the product. - Cards will not be laminated properly if the Front Cover is not fully closed. (Make sure it is closed.) - If the Front Cover is not closed completely, the LCD Display Panel indicates the message: “COVER OPEN”. Important1. Push the Front Cover in until it “clicks”.
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual20 21Load Upper Cleaning Roller & Films1. Pull the cartridge out while pressing the Cartridge Load/Eject Button to remove it from the laminator.- Load Upper Cleaning Roller2. Align the Cleaning Roller with its hole and push it down until it clicks.After installation of cleaning roller- Make sure that it is fully inserted into the Cleaning Roller Hole before pushing the indicated area.ImportantCleaning roller hole
©2017 T.I.TENG Co., Ltd. All rights reserved POINTMAN LAMINATOR NL200 User Manual22 231. Load the films in the correct position as shown in the image below.- Load Films to Upper Cartridge- Place the white film core on the core guide. - The white film core does not fit the black film core guide.- Do not force the film core in as it can damage the cartridge. - Check the position of the RFID tag.Important2. Check the position of the Upper Film Cartridge and films for rewinding and push the cartridge in until it clicks.RFID Tag Reader RFID Tag

Navigation menu