TMI 070035F-070043 HEADREST 7.0" 16:9 LCD MONITOR User Manual AS700 user s manual0522

Download:
Mirror Download [FCC.gov]
Document ID	1000935
Application ID	8wcqIR9Yi+ZCzZUVQCGceA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.33kB (404184 bits)
Date Submitted	2008-09-14 00:00:00
Date Available	2008-09-14 00:00:00
Creation Date	2008-05-23 14:15:34
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2008-05-23 14:15:34
Document Title	AS700 user's manual0522.pdf
Document Creator	PScript5.dll Version 5.2
Document Author:	rachel.tsai

TMI PRODUCTS, INC.
OPERATING
INSTRUCTIONS
Headrest 7.0" 16:9 Color Display Monitor
Model No.AS700
Important Notice
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is
equipped with a television or screen that is located in the motor vehicle at
any point forward of the back of the driver's seat, or that is visible directly
or indirectly to the driver while operating the vehicle.
CAUTION
1.
2.
3.
4.
Do not expose to direct sunlight for extended periods of time.
Do not drop the monitor or expose to strong impacts.
Keep the monitor clean and dry.
Do not operate the monitor at temperatures below -22째F (-30째C) or above 185째F (85째C).
9100768
Installation Guide:
The kit includes a protective trim ring and an optional spacer ring for use when the mounting
surface is uneven.
1. Select appropriate locations in your vehicle for the monitor .
2. Be sure there is sufficient depth for the trim ring. Add the spacer ring for shallow locations
with uneven curved surfaces such as upholstery. Be sure there is enough space for both
the trim ring and for any excess interconnect cable.
3. Ensure that the interconnect cable will reach from the monitor location .
4. Create the required opening for the monitor and trim ring. Be sure it is not too large, and
that there is enough space behind the trim ring to store any excess interconnect cable.
Excess cable does not fit within the trim ring.
5. Route the cable through the opening in the trim ring
6. Connect the cable to the monitor.
7. Securely snap the monitor into place.
Cable
If you need to remove the monitor from the trim ring, insert a credit card between the monitor and
the trim ring to release the monitor from the flexible locking retainer tabs. Gently pull the monitor
from the trim ring. Very gentle pressure can be applied using the credit card.
01
Electrical Connections:
Passage side
A (L)
AV IN 3
A (R)
A (L)
AV IN 1
SERIAL NO.
BLACK-GND
RED-ACC
YELLOW-BATTERY
4 Green-Park
POWER CORD
AD-7071
Red --- ACC
ADAPTORS
INPUT DC-13.2V
FUSE 2A
IR OUT
Black --- GND
A (R)
Drive side
Yellow ---Power
Green --- Park
Note: P leas e make s ure all cables are connected
correctly, wrong connections will damage
the monitor.
02
Basic Operation:
Front Control Panel:
1. IR Receive
2. LCD Panel
10. Earphone
3. POWER : ON / OFF / AUX Selection button
(press and hold the button will power off)
9. A / V AUX
8. IR Transmitter
(2 Input)
4. SOURCE : Select the internal AV1 / AV2 / AV3
player
5/!MENU : Activation of Menu Indicator
6/!UP : Positive and Negative Adjustment
7/!DOWN : Positive and Negative Adjustment
(POWER)
Pressing this POWER (
) button will turn the unit on. If unit off, a single
press should turn the unit on.
Source
SOURCE
This button lets you select the internal AV1 / AV2 / AV3 player.
03
Basic Operation:
Menu
MENU
If the source unit selected has a Setup Menu, you can access it by
pressing Source Menu. With the AV1 / AV2 / AV3, this button activates
the screen Constrast / Brightness / Color / Tint / Shapness / Dimmer /
Screen / Reset default feature.
5, 6
Up / Down
Press to move up or down in a menu or to change channel when
watching TV.
On-Screen-Display Settings:
MODE:
When monitor is power on, press mode button on remote or power button control panel to select
video inputs AV1/AV2/AV3 NTSC/PAL. (Press and hold power button on control panel
will power off the monitor.)
VOLUME:
Press up/down button on remote or on control panel to select "VOLUME" setting, "VOLUME"
setting will show as below (right chart).
VOLUME
04
On-Screen-Display Settings:
CONSTRAST:
Press Menu button on remote or on control panel, OSD menu will show on LCD screen as below
(left chart), press up/down button on remote or press and hold up/down button on control panel to
select "CONSTRAST" setting, "CONSTRAST" setting will show as below (right chart).
CONSTRAST
BRIGHTNESS:
Press Menu button on remote or on control panel, OSD menu will show on LCD screen as below
(left chart) , press enter button on remote or power button on control panel to select "BRIGHTNESS"
setting, "BRIGHTNESS" setting will show as below (right chart).
BRIGHTNESS
COLOR:
Press Menu button on remote or on control panel, OSD menu will show on LCD screen as below
(left chart), press up/down button on remote or press and hold up/down button on control panel to
select "COLOR" setting, "COLOR" setting will show as below (right chart).
05
On-Screen-Display Settings:
TINT:
Press Menu button on remote or on control panel, OSD menu will show on LCD
screen as below (left chart), press up/down button on remote or press
and hold up/down button on control panel to select "TINT" setting. "TINT" setting
will show as below (right chart).
TINT
SHAPNESS:
Press Menu button on remote or on control panel, OSD menu will show on LCD
screen as below (left chart), press up/down button on remote or press
and hold up/down button on control panel to select "SHAPNESS" setting.
"SHAPNESS" setting will show as below (right chart).
SHAPNESS
DIMMER:
Press Menu button on remote or on control panel, OSD menu will show on LCD
screen as below (left chart), press up/down button on remote or press
and hold up/down button on control panel to select "DIMMER" setting. "DIMMER"
setting will show as below (right chart).
DIMMER HIGH
DIMMER LOW
06
DIMMER MEDIUM
On-Screen-Display Settings:
SCREEN:
Press Menu button on remote or on control panel, OSD menu will show on LCD
screen as below (left chart), press up/down button on remote or press
and hold up/down button on control panel to select "SCREEN" setting. "SCREEN"
setting will show as below (right chart).
SCREEN
NORMAL
SCREEN
ZOOM
SCREEN
WIDE
FM MODULE:
Press Menu button on remote or on control panel, OSD menu will show on LCD
screen as below (left chart), press up/down button on remote or press and hold
up/down button on control panel to select "FM MODULE" setting."FM MODULE"
setting will show as below (right chart).
FM MODULE
ON
FM MODULE
FM MODULE
OFF
FM CHANNEL:
Press Menu button on remote or on control panel, OSD menu will show on LCD
screen as below (left chart), press up/down button on remote or press
and hold up/down button on control panel to select "FM CHANNEL" setting."SCREEN"
setting will show as below (right chart).
FM CHANNEL
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
88.5MHZ
88.7MHZ
88.9MHZ
89.1MHZ
89.3MHZ
89.5MHZ
89.7MHZ
89.9MHZ
07
On-Screen-Display Settings:
RESET DEFAULT
Press Menu button on control panel, OSD menu will show on LCD screen as below (left chart),
Press up/down button on control panel to select "RESET DEFAULT" setting. "RESET" setting will
show as below (right chart).
RESET DEFAULT
BASIC FUNCTIONS :
Press and hold Menu button about 5 seconds on control panel to select from the
Channel A / B /OFF various mode settings, OSD menu will show on LCD screen as
below (down chart), press up/down button on remote or press and hold up/down
button on control panel to select "BASIC FUNCTIONS" setting. The mode setting
status will change each time when MENU button is pressed. "MENU" setting will
show as below (down chart).
MENU
IR CHANNEL CH A
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH A
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH A
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH B
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH B
AV SYSTEM
AV1 / 2
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH B
AV SYSTEM
AV1 / 2 / 3
MIRROR
ON
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
08
MENU
IR CHANNEL CH OFF
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
Basic Functions :
MENU
IR CHANNEL CH A
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH A
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH A
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH B
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
AUTO
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH OFF
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
ON
DIMMER
MANUAL
FM-FUNC
ON
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH B
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
OFF
EXIT
SOFTWARE VERSION 7071 V1.0
MENU
IR CHANNEL CH B
AV SYSTEM
AV1 / 2 / 3
MIRROR
OFF
SCREEN
OFF
DIMMER
MANUAL
FM-FUNC
OFF
EXIT
SOFTWARE VERSION 7071 V1.0
Installation Notes:
The Wide Screen Universal Monitor includes mounting options described in the
following sections. Before you install the monitor, consider the following
important notices:
1. NEVER install this monitor where it can be viewed from the driving position;
this is a violation of many state and local vehicle codes.
2. Avoid mounting locations where there is a risk of impact with a passenger in
the event of an accident.
3. Always mount the monitor securely using the mounting hardware that is
provided. Do not use the monitor unless it is properly secured to the vehicle.
09
Highlights:
7" Active TFT LCD
AS700 with built-in FMM
AS700
- Without FMM
- Can be use for visor monitor
Monitor can be turned ON when Parking is high or floating
Monitor will shut down when parking is set to Low.
Front access AUX and Headphone jacks
No AV Box
Very competitive cost
HS3.1 replacement
A/V Input and Output:
Input:
Input from DVD loader (RCA)
Input from Game Console or the second DVD player (RCA)
Front bezel Aux input
Output:
Diver side FMM for Audio
Driver and Passenger side IR audio
Front bezel earphone
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation
FCC RF Radiation Exposure Statement:
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
10

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2008:05:23 14:15:34+08:00
Modify Date                     : 2008:05:23 14:15:34+08:00
Page Count                      : 11
Creation Date                   : 2008:05:23 06:15:34Z
Mod Date                        : 2008:05:23 06:15:34Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : rachel.tsai
Metadata Date                   : 2008:05:23 06:15:34Z
Creator                         : rachel.tsai
Title                           : AS700 user's manual0522.pdf

EXIF Metadata provided by EXIF.tools