Users Manual

 - 1 - TF-200                            VER 101  WIRELESS DONGLE  Operation Manual
-Y -GͲΥΥΖΟΥΚΠΟ͙͚͑͑͑͢ͲΝΝ͑ΣΚΘΙΥΤ͑ΣΖΤΖΣΧΖΕ͙͚͑ͣ͑͟΅ΙΚΤ͑ΞΒΟΦΒΝ׏Τ͑ΔΠΟΥΖΟΥΤ͑ΒΣΖ͑ΔΙΒΟΘΖΕ͑ΨΚΥΙΠΦΥ͑ΟΠΥΚΔΖ͙͚͑ͤ͑͟ͺΗ͑ΪΠΦ͑ΨΒΟΥ͑ΥΠ͑ΜΟΠΨ͑ΒΓΠΦΥ͑ΕΖΥΒΚΝΖΕ͑ΠΗ͑ΥΙΚΤ͑ΞΒΟΦΒΝ͑ΒΟΕ͑ΨΒΟΥ͑ΥΠ͑ΒΤΜ͑ΤΠΞΖΥΙΚΟΘ͑ΥΠ͑ΠΦΣ͑ΔΠΞΡΒΟΪ͑ΡΝΖΒΤΖ͑ΔΠΟΥΒΔΥ͑ΥΠ͑ΠΦΣ͑ΒΘΖΟΔΪ͑ΠΣ͑ ͑ ΙΖΒΕ͑ΠΗΗΚΔΖ͑͟ ͙͚͑ͥ͑΁ΝΖΒΤΖ͑ΦΟΕΖΣΤΥΒΟΕ͑ΥΙΒΥ͑ΨΖ͑ΕΠΟ׏Υ͑ΥΒΜΖ͑ΒΟΪ͑ΣΖΤΡΠΟΤΚΓΚΝΚΥΪ͑ΒΓΠΦΥ͑͑ ͑ ͑ ΥΙΚΤ͑ΡΣΠΕΦΔΥ͙͚͑ͦ͑͟ΈΖ͑ΔΒΟΟΠΥ͑ΡΣΠΧΚΕΖ͑ΤΖΔΦΣΖ͑ΤΖΣΧΚΔΖ͑ΓΖΔΒΦΤΖ͑ΚΥ͑ΨΚΝΝ͑ΡΠΤΤΚΓΝΖ͑ ͑ΚΟΥΖΣΗΖΣΖΟΔΖ͑ΥΙΚΤ͑ΪΖΒΣ͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͑͟FCC STATEMENTThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesiredoperation.[Note] The manufacturer is not responsible for any interference, for example RADIO or TVinterference, caused by unauthorized modifications to this equipment. Such modifications could voidthe user's authority to operate the equipment.[IMPORTANT NOTE] To comply with FCC RF exposure compliance requirements, this device must not be co-located or operating in conjunction with any other antenna or transmitterGG
 - 3 - A. INTRODUCTION    Thank  you  very  much  for  purchasing  our  products.  TF-200  is  designed to  deal  for  various  request  of  industry  scene. You  can  use  anytime  this  radio  system. Please read this manual before you use this product then to make       use of collect and to apply functions.   <Precaution>   ◆  Please  avoid  it  from  changeable  temperature.   ◆  please  don’t  too  much  shock  to  it. ◆ Please put it seasoned place.  ◆ Keep it out of the direct rays of the sun and avoid a vibration. ◆ Please don’t put it high voltage and too much electric wave place. ◆ Please avoid from the rain.  ◆ Don’t take it apart, remodel, convert and fix intentionally.  ◆ Please you charge only use an adapter for attachments.  B. FEATURE   ◆  The  wireless  transmitter  and  a  receiver.   ◆  It  can  use  for  wireless  printer  if  it  connect  to  serial-printer.       USER MODE     : YJ-360 printer     EXT. KEY MODE  : YJ-380 printer
 - 4 - C. TECHNICAL SPECIFICATIONS       ◆  General specifications Case material  Engineering Plastic Temperature range  -10℃  ~ 40℃ Display lamp  Red (power on) Adaptor  DC 5V, 2A    ◆ Wireless communication specifications RF frequency range  2402 ~ 2480 MHz Output power  Under 10 dBmChannel width  2 MHz Frequency offset  <  ±30ppm Transmit data rate  250Kbps,500Kbps Receiver sensitivity  -99dBm (PER <1%) Maximum input level  0dBm RF In/out impedance  50 ohm (TXRF, RXRF) Spurious(2nd harmonics)  < -30dBm Radio link effective range  Approx. 100M (Open space)
 - 5 -   ◆ PRODUCT SIZE           ◆  SPECIFICATIONS: 9PIN D-SUB CONNECTOR PIN1  PIN2 PIN3  PIN4 PIN5 PIN6 PIN7 PIN8  PIN9   TXD  RXD    GND       VCC DC 5VBaud rate: 9600bps, 8bit, 1 stop bit, none parity     ◆  LAMP & ADAPTOR JACK   Switch of setting up state and wireless mode  Lamp of state  Adapter of power (5V)       ◆  ITEMS - Body: 1EA     - Manual: 1EA - Adaptor: 1EA (OPTION) - USB-RS232C cable: 1EA (OPTION)
 - 6 - D. CONSTITUTION OF WIRELESS  (1)  Serial  printer [When  it  use  for  printer  to  set  MODE 2] It  can  print  weigh  date  by  wireless  when  it  connects  to  serial  printer.          [YJ-360]                              [YJ-380] YJ-360 It can print only USER MODE. It has many functions TF-100 It use for printing to use wireless controller.  YJ-380 It  has  many  functions  for  example  are  EXT.KEY  MODE  etc.   It can print the total and subtotal from simple indicator or a scale   when  they  connect  to  it. When  YJ-360  or  YJ-380  uses  it  needless  any  power  source  from  external.  (Printer  has  power  sources  itself)  (2)  PC  :  RS-232C  9PIN  D-SUB  serial port When computer has 9PIN D-SUB serial port, you can use TF-200 by connecting directly. But when that time, you must use additional power adaptor (it is being sold separately)    (3) PC : USB port It needs not to use additional power adaptor by using the extra exchanging cable (it is being sold separately. cable  has  power  sources  itself)
 - 7 - E. SETTING MODE  ◆  Setting of mode - The way to change mode. - Connect the power while pressing the switch  - Mode is changed after light that is orange color turning on and off of   light for the 5 seconds.   red -> green     red -> green - When the changing to the mode you hoped is not completed, can change by repeating the flow 1~3 till success  1 2 3
 - 8 -  ◆  Map of constitution   - MODE 1 [lamp: red] : COORDINATOR - MODE 2 [lamp: green] : END DEVICE There is only one of ‘Mode 1’ in group. ‘Mode 2’ can connect with the machine number of N. You can connect like the picture of below [ 1 : 1 ] [ 1 : N ]                      F. SETTING A WIRELESS GROUP
 - 9 - ◆  Setting a wireless group - The way to enter the pairing mode   - When you enter the pairing mode, it has no connection with a condition of mode. Press  “set switch”  of the TF200 for the 5 seconds with the power on that connected.   - After 5 seconds , If entering to the pairing mode is completed, Light that is suitable to the mode turns on and off. Way to enter the pairing mode of both products of MODE 1 and MODE 2 are same way.   1 2 3 If  you  press  the  ‘set  button’  on  the  MODE  1 when condition of that is same with (2), Entering to the pairing mode will be completed over  turning  on and off with red & green.
 - 10 - MEMO
  EC Declaration of Conformity  Manufacturer  TMT ENGINEERING CO., LTD.       Address 901, Gangbuk electronic complex #229-10, Beon-dong,   Gangbuk-gu, Seoul, 142-705 South Korea       Declares that the following product  Product Name:  ZIGBEE WIRELESS DONGLE   Model Number:  TF-200   conforms to the technical regulations applicable to the product within the scope of Directives 2006/95/EC (LVD), 2004/108/EC (EMC), and 1999/5/EC (R&TTE):  Article 3.1(a)  Health  EN 50371:2002   Article 3.1(a)  Safety  IEC 60950-1:2001 EN 60950-1:2006      Article 3.1(b)  EMC  EN 301 489-1 V1.8.1 (2008-04)     EN 301 489-17 V1.3.2 (2008-04)        Article 3.2  Radio  EN 300 328 V1.7.1 (2006-10)             All essential radio test suites have been carried out. The relevant technical file is available for inspection.  Notified Body  EMCCert Dr. Rasek GmbH    Boelwiese 5    91320 Ebermannstadt    Germany     EU Identification Number: 0678    This declaration is issued under the sole responsibility of the manufacture and, if applicable, his authorized representative.    Point of contact Sim JaeIl, TEL:+82-2-987-7001, FAX:+82-2-987-8007    (Name, telephone and fax number)      South Korea, February 22, 2010   Jae il Sim   (Place, date of issue)  (Signature)       Sim Jaeil / Assistantant Engineer     (Name and title in block letters)

Navigation menu