TOA WM-3310 VHF-FM Wireless Microphone User Manual WM 3310
TOA Corporation VHF-FM Wireless Microphone WM 3310
TOA >
Manual
8. OPERATING INSTRUCTIONS
UHF WIRELESS MICROPHONE WM-3310
WM-3310H
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS .............................................................................. 10
2. GENERAL DESCRIPTION ........................................................................... 11
3. FEATURES ........................................................................................................ 11
4. HANDLING PRECAUTIONS ........................................................................ 11
5. NOMENCLATURE ........................................................................................... 12
6. BATTERY INSERTION ................................................................................... 13
7. OPERATION ...................................................................................................... 13
8. OPERATIONAL HINTS .................................................................................. 14
9. DISTANCE BETWEEN THE MICROPHONE AND THE MOUTH ..... 14
10. CHANNEL NUMBER SETTING .................................................................. 14
11. AUDIO LEVEL ADJUSTMENT (SENSITIVITY CONTROL) ............... 14
12. LICENSE REQUIREMENT ........................................................................... 15
13. SPECIFICATIONS ........................................................................................... 15
Accessories ............................................................................................................ 15
10
•To prevent the electromagnetic wave from badly
influencing medical equipment, make sure to
switch off the unit's power when placing it in close
proximity to the medical equipment.
•When the unit is not in use for 10 days or more, be
sure to take the battery out of the unit because
battery leakage may cause personal injury or
contamination of environment.
•Make sure to observe the following handling
precautions so that a fire or personal injury does
not result from leakage or explosion of the battery.
·Do not short, disassemble, heat nor put the
battery into a fire.
·Never charge batteries of the type which are not
rechargeable.
· Do not solder a battery directly.
· Be sure to use the specified type of battery.
·Note correct polarity (positive and negative
orientation) when inserting a battery in the unit.
·Avoid locations exposed to the direct sunlight,
high temperature and high humidity when storing
batteries.
WARNING
1. SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
•Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Indicates a potentially hazardous situation which, if mishandled, could result in
death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could result in
moderate or minor personal injury, and/or property damage.
WARNING
CAUTION
CAUTION
11
2. GENERAL DESCRIPTION
The wireless microphone WM-3310 is of lavalier type, while the WM-3310H is of headset
type, and all are designed for use on VHF band.
The WM-3310/-3310H accommodate the supplied microphone unit or headset with a cardioid pick-up
pattern and are suitable for speech reinforcement applications. The built-in circuitry is so designed to minimize
the influence from ambient noise.
3. FEATURES
• One frequency can be selected from 6 operating frequencies of 6 frequencies of 169 – 216 MHz.
•An optimized PLL-synthesizer minimizes the oscillation frequency drift resulting from the ambient
temperature or voltage fluctuation.
• Audio level control adjusts the microphone sensitivity.
•Battery lamp indicates battery consumption to prevent the unit from malfunctioning when the battery level
remarkably decreases.
• Compact size and high reliability
4. HANDLING PRECAUTIONS
•Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as
doing so may result in unit failure.
• Never open nor remove the unit case to modify the unit. Refer all servicing to your nearest TOA dealer.
• Take care not to drop the unit onto the floor nor bump it against a hard object as the unit could fail.
•Do not place the unit in locations of high temperature (ex. in a car parked in summer) or high humidity as the
unit could fail.
• Do not use the unit in locations where it is exposed to seawater.
•To clean, use a dry cloth. When the unit gets very dirty, wipe lightly with a cloth damped in a dilute neutral
cleanser, then wipe with a dry cloth. Never use benzine, thinner, or chemically-treated cleaning towel.
• Avoid using a mobile telephone near the wireless microphone in use. Noise could be picked up.
Windscreen
Microphone
Windscreen
ø3.5
Plug lock
Gooseneck
Microphone
[ Headset ] (WM-3310H only)
12
5. NOMENCLATURE
Power/Battery lamp
(Orange LED)
Power ON/OFF
switch (push lock)
Audio level control
Clip
(Rotates 360.)
Channel select switch
32
23.5
102
142
62
Crip
Plug lock
ø3.5
Unit: mm
[ Main unit ] [ Microphone unit ] (WM-3310 only)
Tie-clip attachment
This part
rotates 360.
13
6. BATTERY INSERTION
Step 1. Holding the microphone body, slide
the battery cover down to open it. The
battery cover is designed not to be
removed from the body.
Step 2. Insert the battery 6LR61 (Alkaline 9 V) according to the instructions attached
to the inside of the battery compartment. Pay attention to the correct polarity
when inserting the battery.
Step 3. Replace the battery cover.
1
Battery replacement
•A brand-new battery will provide the power enough to operate the unit
continuously for 10 hours.
•As long as the battery has sufficient power for the microphone to function
properly, the orange LED will light. When the orange LED starts to fade and
then flash, replace it with a new one.
Power/Battery lamp
(Orange LED)
7. OPERATION
Step 1. Plug the microphone's plug into the input connector as illustrated.
Step 2. Make sure that the receiver and the wireless microphone are of the same channel (frequency).
Step 3. If they are not identical in channel, you have to adjust the channel switch.
Step 4. Press the microphone ON/OFF switch to turn on the microphone.
The orange LED indicates the circuit is active.
Step 5. Make sure to press the ON/OFF switch again to turn off the microphone after using.
2
1Plug lock
Secure the connection
with the plug lock.
14
10. CHANNEL NUMBER SETTING
Step 1. Slide the battery cover down to open it.
Step 2. Using the supplied screwdriver, set the Channel setting
switch pointer to the desired channel number.
Step 3. Replace the battery cover.
Note: Make sure that the wireless microphone is identical to the wireless tuner in the channel number.
Should the microphone's setting differ from that of the tuner, the tuner does not receive the
microphone signal.
22222222
11. AUDIO LEVEL ADJUSTMENT (SENSITIVITY CONTROL)
To change the factory-preset level, follow the procedures below.
Step 1. Holding the microphone body, slide the battery cover down
to open it. The battery cover is designed not to be removed
from the body.
Step 2. Switch on the power of the tuner and microphone.
Step 3. Adjust the audio level control using the supplied screwdriver.
The microphone sensitivity increases as the control is rotated
clockwise, and decrease as rotated counterclockwise.
3Audio level control
3Audio level control
3Audio level control
3Audio level control
3Audio level control
3Audio level control
3Audio level control
3Audio level control
9. DISTANCE BETWEEN THE MICROPHONE AND THE MOUTH
[Lavalier type version (WA-3310)]
Keep your mouth 15-20 cm away from the microphone for the best possible sound reproduction. Take care
not to bring your mouth too close to the microphone (within 5 cm) as this impairs speech clarity if you speak
loudly.
[Headset type version (WA-3310H)]
By adjusting the gooseneck, locate the microphone with the supplied windscreen in front of your mouth, and
position it 3-5 cm away from your mouth for the best sound reproduction. When the microphone is too close to
your mouth or you speak too loud, speech clarity will be impaired, making it hard for the audience to hear
announcements.
8. OPERATIONAL HINTS
•The microphone's service distance is 3 – 100 m. When the microphone user moves in a facility, signal
dropouts (momentary losses of signal reception) may be encountered. These dropouts are caused by the
building's architectural designs or materials which block the travel of or reflect the radio signal. If this occurs,
the user needs to change locations for better signal reception.
•The proper operation of your wireless system may be interfered with by other system operating on the same
frequency. In such cases, change the operating frequency of your system. (As to dealing with the
interference, refer to the operating instructions of the wireless tuner.)
•Should you have any questions regarding the use or availability of TOA wireless products, please contact
your local TOA dealer.
15
Microphone Element Electret condenser type, cardioid pattern
Emission F3E
Frequency Range 169 – 216 MHz, UHF
Selectable Channel 6 channels
RF Carrier Power Less than 50 mW
Tone Frequency 32.768 kHz
Modulation System PLL synthesizer
Maximum Input Level 120 dB SPL
Battery 6LR61 (9 V x 1)
Battery Life 10 hours (alkaline)
Indicator Power/Battery lamp (common use)
Antenna wire type
Operating Temperature –10 to +50°C
Finish Resin, coating, dark gray
Dimensions 62 (w) x 142 (h) x 32 (d) mm
Weight 150 g (with battery)
13. SPECIFICATIONS
[ WM-3310 ]
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1
12. LICENSE REQUIREMENT
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Step 4. Adjust the corresponding tuner's volume control so that its knob points to the 2 o'clock position. If the
tuner's AF PEAK indicator remains lit, readjust the microphone's audio level control to the position
that causes the indicator to flash when the tuner output level reaches its peak. The AF PEAK indicator
lights when the output level reaches the point of about 3 dB below the clipping level.
Note
The AF PEAK indicator operates in response to the volume control position.
However, the AF LEVEL indicator (on the WT-3810) indicates the level regardless of the volume
control setting.
Step 5. Replace the battery cover.
Main unit
Emission F3E
Frequency Range 169 – 216 MHz, UHF
Selectable Channel 6 channels
RF Carrier Power Less than 50 mW
Tone Frequency 32.768 kHz
Modulation System PLL synthesizer
Maximum Input Level 120 dB SPL
Battery 6LR61 (9 V x 1)
Battery Life 10 hours (alkaline)
Indicator Power/Battery lamp (common use)
Antenna wire type
Operating Temperature –10 to +50°C
Finish Resin, coating, dark gray
Dimensions 62 (w) x 142 (h) x 32 (d) mm
Weight 150 g (with battery)
Headset
Microphone Element Electret type, cardioid pattern
Power Source DC (supplied from lavalier pack)
Output Impedance 1.6 k ± 30% (1,000 Hz)
Cable Length 1.45 m
Connector ø3.5 mm mini-plug
[ WM-3310H ]
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1
Main unit
Emission F3E
Frequency Range 169 – 216 MHz, UHF
Selectable Channel 6 channels
RF Carrier Power Less than 50 mW
Tone Frequency 32.768 kHz
Modulation System PLL synthesizer
Maximum Input Level 120 dB SPL
Battery 6LR61 (9 V x 1)
Battery Life 10 hours (alkaline)
Indicator Power/Battery lamp (common use)
Antenna wire type
Operating Temperature –10 to +50°C
Finish Resin, coating, dark gray
Dimensions 62 (w) x 142 (h) x 32 (d) mm
Weight 150 g (with battery)
Headset
Microphone Element Electret type, cardioid pattern
Power Source DC (supplied from lavalier pack)
Output Impedance 1.6 k ± 30% (1,000 Hz)
Cable Length 1.45 m
Connector ø3.5 mm mini-plug
[ WM-3310H ]
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1
Main unit
Emission F3E
Frequency Range 169 – 216 MHz, UHF
Selectable Channel 6 channels
RF Carrier Power Less than 50 mW
Tone Frequency 32.768 kHz
Modulation System PLL synthesizer
Maximum Input Level 120 dB SPL
Battery 6LR61 (9 V x 1)
Battery Life 10 hours (alkaline)
Indicator Power/Battery lamp (common use)
Antenna wire type
Operating Temperature –10 to +50°C
Finish Resin, coating, dark gray
Dimensions 62 (w) x 142 (h) x 32 (d) mm
Weight 150 g (with battery)
Headset
Microphone Element Electret type, cardioid pattern
Power Source DC (supplied from lavalier pack)
Output Impedance 1.6 k ± 30% (1,000 Hz)
Cable Length 1.45 m
Connector ø3.5 mm mini-plug
[ WM-3310H ]
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1
Main unit
Emission F3E
Frequency Range 169 – 216 MHz, UHF
Selectable Channel 6 channels
RF Carrier Power Less than 50 mW
Tone Frequency 32.768 kHz
Modulation System PLL synthesizer
Maximum Input Level 120 dB SPL
Battery 6LR61 (9 V x 1)
Battery Life 10 hours (alkaline)
Indicator Power/Battery lamp (common use)
Antenna wire type
Operating Temperature –10 to +50°C
Finish Resin, coating, dark gray
Dimensions 62 (w) x 142 (h) x 32 (d) mm
Weight 150 g (with battery)
Headset
Microphone Element Electret type, cardioid pattern
Power Source DC (supplied from lavalier pack)
Output Impedance 1.6 k ± 30% (1,000 Hz)
Cable Length 1.45 m
Connector ø3.5 mm mini-plug
[ WM-3310H ]
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1