TOHNICHI MFG FHD256M RF Module User Manual FHD256M

Download:
Mirror Download [FCC.gov]
Document ID	942808
Application ID	am6zI6TqUBOyVxMp2OUlHQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.4kB (17497 bits)
Date Submitted	2008-05-17 00:00:00
Date Available	2008-05-17 00:00:00
Creation Date	2008-05-13 20:13:09
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2008-05-13 20:13:09
Document Title	Microsoft Word - User_Manual_FHD256M.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User Manual
TOHNICHI RF MODULE
MODEL: FHD256M
The purpose of this manual is to explain correct way how to integrate module FHD256M to the end
product. It includes procedures that shall assist you to avoid unforeseen problems. This manual
presents information that shows how module and end product, where module integrated, complies
with regulations in certain regions. Any modifications, not expressly approved by the manufacturer
could void the authority to operate in these regions.
The TOHNICHI RF MODULE, model FHD256M is installed in a hand-held operation only portable
device or in a fixed device. Held to head operation is prohibited.
And the FHD256M RF MODULE has to be installed and used in accordance with the technical
description/installation instructions provided by the manufacturer.
For detail information concerning type approval of this module (e.g. where this module is already
pre-approved) please contact the authorized local distributor or the manufacturer.
The system may only be implemented in the configuration that was authorized. Note that any
changes or modifications to this equipment not expressly approved by the manufacturer could void
the user’s authority to operate this equipment.
Regulatory Information
USA-Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be
determined by tuning the equipment off and on, the user is encouraged to try and correct the
interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
Labeling
TOHNICHI RF MODULE C FHD256M is labelled as below.
FCC ID: UY6-FHD256M
The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when
the module is installed into the system, “Contains FCC ID: UY6-FHD256M” shall be placed on the
outside of final host system.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at least
20 cm must be maintained between the antenna of this device and all persons. This device
must not be co-located or operating in conjunction with any other antenna or transmitter.
Canada-Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation of this device.
L ‘ utilization de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce
brouillage est susceptible de compromettre le fomctionnement du dispositif.
The term “IC” before the equipment certification number only signifies that the Industry Canada
technical specifications were met.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for
successful communication.
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing.
Pour empecher que cet appareil cause du brouillage au service faisant l’objet d’une licence, il doit
etre utilize a l’interieur et devrait etre place loin des fenetres afinde Fournier un ecram de blindage
maximal. Si le matriel (ou son antenne d’emission) est installe a l’exterieur, il doit faire l’objet d’une
licence.
Caution: Exposure to Radio Frequency Radiation.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it
does not emit RF field in excess of Health Canada limits for the general population; consult Safety
Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2008:05:13 20:13:09+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:05:13 20:13:09+09:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - User_Manual_FHD256M.doc
Document ID                     : uuid:dba47cf2-7650-4d54-80bf-942ba0013f0a
Instance ID                     : uuid:ecd4ee89-b9b1-4c65-b2a1-c5c99f8f9b19
Page Count                      : 4
Author                          : Administrator

EXIF Metadata provided by EXIF.tools