TOHNICHI MFG TFH256MCAR RF TRANSCEIVER User Manual FH256 User Manual FCC IC

Download:
Mirror Download [FCC.gov]
Document ID	1412320
Application ID	t8wQwdPf1QkesWXtvesS8A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	19.49kB (243601 bits)
Date Submitted	2011-02-01 00:00:00
Date Available	2011-02-01 00:00:00
Creation Date	2007-08-24 10:04:12
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2011-01-20 10:01:33
Document Title	Microsoft Word - FH256_User_Manual_FCC_IC.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

REMOTE SIGNAL TORQUE WRENCH
OPERATIONAL MANUAL
RF Transceiver
T-FH256MC-AR
RF Terminal
R-FH256
RF Setting Box
SB-FH256
(Option)
Federal Communication Commission Declaration of Conformity (DoC)
Statement
Model No: R-FH256, SB-FH256
Trade Name
TOHNICHI
Responsible Party
Tohnichi America Corp.
Address
677 Academy Drive, Northbrook, Illinois 60062
Telephone No
847-272-8480
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected. • Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Caution:
Any changes or modifications not expressly approved by the party responsible for product
compliance could void the user's authority to operate the equipment.
To comply with FCC RF exposure compliance requirements, this device must not be
co-located or operating in conjunction with any other antenna or transmitter.
Canada Regulatory Compliance Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du
Canada.
For Customers in Canada
This device complies with RSS 210 of Industry Canada (IC).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired
operation of this device.
L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
(1) il ne doit pas produire de brouillage et
(2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Exposure to radio frequency radiation
The installer of this radio equipment must ensure that the antenna is located or pointed such
that it does not emit RF field in excess of Health Canada limits for the general population;
consult Safety Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb.
1. Outline
This Remote Signal Type torque wrench sends the tightening completion signal to the
Receiver far from the wrench through radio wave.
The receiver can be connected to the Tohnichi CNA-4mk2 Count Checker to provide
complete tightening assurance system to eliminate missed tightening.
2. Features
■
Antenna-less and Disconnection-less
It is easy to replace the RF Transceiver.
■
Monitoring torque wrenches by ID
It ensures traceability of Torque wrenches by ID (serial number: 7 alphanumeric
digits).
■
Only one model both RF Transceiver and RF Terminal (Minimum spare)
The group channel and torque wrench ID can be easily set and changed from the
RF Setting Box (Option).
■
Efficient working
The user with the torque wrench can know the communication status by an
answerback method.
■
Mountable on Limit Switch(LS) Torque Wrench (T-FH256MC-AR)
The T-FH256MC-AR RF Transceiver can be mounted on any LS Torque Wrench with a
spacer for Limit Switch.
■
Easy replacement of the battery for RF Transceiver only by removing the battery cover.
■
Efficient Setting by wireless technology
The group channel and torque wrench ID can be set and changed by Wireless
technology.
■
Durable Light-weigh aluminum case
The light-weight aluminum case is more durable than silicon case.
■
World wide 2.4GHz band
It is compliant with FCC, IC and CE.
3. Specification
RF Transceiver
Model Name
T-FH256MC-AR
RF Terminal
R-FH256
Frequency
2.402GHz – 2.479GHz
Group Channel
G000 - 255
ID
Signal output
RF Setting Box
SB-FH256
3 digits (numeric), 7 digits (alphanumeric)
N/A
N/A
RS232C
No-Voltage Contact
Output(1a)
RS232C
Power Supply
DC 1.5V (AAA
AC 100V – 240V
DC 9V (Alkaline
Alkaline battery)
Antenna
Operating
dry cell)
Chip antenna
Dipole Antenna
0 – 45 C
Temperature range
Operating distance
Approx. 10 – 20m (The operating distance may shorten depending
the operation environment.)
4. Configuration
RF Transceiver
T-FH256MC-AR
Radio wave
Radio wave
Radio wave
RF Setting Box
SB-FH256
(Option)
RS232C
RF Terminal
R-FH256
No-Voltage
Contact
Output(1a)
Count Checker
CNA-4mk2
(Option)
RS232C
: Work Flow
: Control Flow
5. Appearance and components
6. Operation
6-1 Precaution
① Handle the torque wrench with care.
② Read the Operation Manual before operation.
③ In case that the an adjustable screw of Preset/Pre-lock type wrench is changed, the
switching mechanism may not work well. Please contact a Tohnichi authorized distributor or
Tohnichi office for replacing a Stud of the torque wrench.
6-2 Replacing RF Transceiver
① Loosen two screws of the transceiver and remove it.
② Install the transceiver, and tighten the screws. (Tightening torque T=270cN・m)
Note: Stud, which comes from wrench, should not be between place spring and the Battery
case when installing the Transceiver.
6-3 Setting the Time to Avoid Double Counting
① The Timer is set to 1 second when delivered.
② To change the time setting, return the variable resistance (VR2) on the Receiver board.
(Refer to “5. Appearance and components”.)
③ The time can be set between 0.2 sec and 2.2 sec.
6-4 Battery Check
① Push the Transmitter-Receiver Check Switch.
② If the Operation Check LED is Green, the battery should be serviceable. If it is red,
replace the battery. Refer to “6-5 Replacing Battery for Transmitter”.
6-5 Replacing Battery for RF Transceiver
① Loosen two screws of the battery cover and remove it.
② Remove the empty Battery, and insert a new one.
③ Always use an AAA Alkaline Battery.
④ Install the battery cover, and tighten the screws by a torque driver. (Tightening torque
T=63cN・m)
6-6 Channel, Group and ID Setting
6-6-1 RF Transceiver Setting
① Set the Setting Selector Switch on the RF Transceiver to “Left” side. The Operation
Check LED turns red and is flashing.
② Push the GET Switch on the RF Setting Box. The current setting appears on the upper
display.
③ Set up a channel group, a criterion code and ID (3 digits).
④ Push the SET Switch on the RF Setting Box.
⑤ The Operation Check LED turns green and lights up around 1 second. After that, it turns
red and starts to flash.
⑥ After confirmed the setting, set the Setting Selector Switch to “Right” side.
6-6-2 RF Terminal Setting
① Set the Setting Selector Switch on the RF Terminal to “Left” side. The SIGNAL LED is
flashing.
② Push the GET Switch on the RF Setting Box. The current setting appears on the upper
display.
③ Set up a channel group, a criterion code and ID (3 digits).
④ Push the SET Switch on the RF Setting Box.
⑤ The buzzer of the RF Terminal starts if the buzzer ON/OFF switch is set to ON.
⑥ After confirmed the setting, set the Setting Selector Switch to “Right” side.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2007:08:24 10:04:12+09:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2011:01:20 10:01:33+09:00
Metadata Date                   : 2011:01:20 10:01:33+09:00
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - FH256_User_Manual_FCC_IC.doc
Document ID                     : uuid:e1c22fd5-0ab1-4a63-8812-50803741488b
Instance ID                     : uuid:132cda00-83c7-492a-b58a-521a0cf58757
Page Count                      : 9
Author                          : Administrator

EXIF Metadata provided by EXIF.tools