TOKWA PRECISION TECHNOLOGY NS651 Car Radio User Manual

SHENZHEN TOKWA PRECISION TECHNOLOGY CO., LTD. Car Radio

User Manual

NS-651 2 DIN 6.5' Touch Screen DVD/CD/MP3/MP4 Player AM/FM Radio Support Bluetooth Owner‟s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.
2 WARNING! To promote safety, certain functions are disabled unless the parking brake is on. The Unit is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of his connection may violate applicable law and may result in serious injury or damage. To avoid the risk of damage and injury and the potential violation of applicable laws, this unit is not for use with a video screen that is visible to the driver.  To avoid the risk of accident and the potential violation of applicable laws, the front Video image feature should never be used while the vehicle is being driven. Also, other video displays should not be in a location where it is a visible distraction to the driver. In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this unit‟s DVD features should not be used.  Please remember to wear your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.  The supplier waves any and all liability when these warnings are not followed. OPERATION PRECAUTIONS  Only connect to a 12Vdc battery and negative grounding.  Avoid placing the product in direct sunlight, in areas with high levels of dust, high temperatures (over 40°C) or high humidity (over 90%). In case of high temperatures, cool down the car interior by means of ventilation or air-conditioning.  Operate in well ventilated areas.  Do not turn on or off the product in short intervals. When turning the unit off, wait for at least 10 seconds prior to turning the unit on again. Do not operate the player with scratched, bended or broken discs and when a disc is not loaded properly, do not force it into the player.  Do not watch video playback while driving which will cause serious danger and risks of traffic accident. It may violate the laws and regulations. (There may be exceptional case, i.e., using rear view camera and navigation system)  Do not install the unit where the operation for safety driving is restrained.  Do not disassembly the unit by yourself, if need repairing, please take the unit to the after service center.  Do not open and close the monitor manually, it may damage the monitor tilt system.  Do not touch the LCD screen by hard objects, it may damage or give scratch to the LCD screen.  If the back of monitor touches dashboard or air-conditioner inlet etc after open the monitor , then setup TILT level in monitor TILT menu to prevent damage from repeat touching.  Car parking under direct sunlight may increase the temperature inside the car and the unit may not be in proper operation, please try it again after the temperature returns to normal.  Do not replace the fuse on the power cable without professional guidance, using improper fuse may cause damage to the unit or even cause burn the unit.  Do not use irregular shaped Disk.  IR remote control operation may be hindered by monitor when the monitor is opened, thus please use the remote control at the similar level of remote control receiver.  Do not install the unit where the cooling fan is blocked.
3 CONTENTS WARNING! ................................................................................................................. 2 OPERATION PRECAUTIONS .................................................................................... 2 CONTENTS ................................................................................................................ 3 ACCESSORIES .......................................................................................................... 4 UNIT INSTALLATION AND REMOVAL…………………………………………………...5 WIRING CONNECTIONS ........................................................................................... 6 FRONT PANEL ........................................................................................................... 8 REMOTE CONTROL .................................................................................................. 9 REMOVE BATTERY ................................................................................................. 11 MAIN MENU ............................................................................................................. 12 ◆ RADIO .................................................................................................................. 12 ◆ DVD PLAYER ...................................................................................................... 13 ◆ USB/TF INTERFEACE OPERATION ................................................................... 13 ◆SETTING CONTROL ............................................................................................ 14 ◆BLUETOOTH SCETION ....................................................................................... 15 ◆AUX-IN MODE ...................................................................................................... 17 OTHER FUNCTIONS ............................................................................................... 17 NOTES ON DISC ..................................................................................................... 18 TROUBLESHOOTING .............................................................................................. 19 TROUBLESHOOTING .............................................................................................. 20 TECHNICAL SPECIFICATIONS ............................................................................... 21 BLUETOOTH CONNECTION ATTENTION INSTRUCTIONS .................................. 22 VIDEO FILE CONVERSION ..................................................................................... 23
4 ACCESSORIES Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) Mounting Strap 1 (3) Bolt 1 (4) Screw 4 (5) Mounting Collar 1 (6) Release Key 2 (7) Screw 1 (8) Rubber Cushion 1 Note: Product image may vary from the actual delivery. Warranty card User Manual Remote Control ISO cable Trim ring
5 INSTALLATION / UN-INSTALLATION Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driver‟s way and will not injure the passenger in case there is a sudden stop, like an emergency stop.  INSTALLATION （Figure 1）  Insert the unit into dash-board hole and fix it  If necessary, place the mount strap at the rear of the unit and fix it with provided washer as figure 2.  Place Trim Ring over the unit and installation is completed as figure 1.  UN-INSTALLATION Insert the supplied extraction keys into the unit and pull the unit out with keeping the extraction keys. (as Figure. 4) Figure 4
6 WIRING CONNECTIONS Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle‟s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. 3. Cut the connector; connect the colored leads of the power cord to the car battery as shown in the color code table below for speaker and power cable connections NOTE: Never connect cable to the system while it is connected to the battery power. Whenever the unit is disconnected from the battery, the preset memory will be erased and the unit will go back to its factory defaults. When the brown cable for steering wheel control connected to the steering wheel, we can use the steering wheel to control some unit Note: To watch video the parking wire should be connected to break signal. 2 cables is connected to a Hands-Free device (not included). Parking wire Note: The parking wire is connected with brake signal; for safety, the programs can be seen on the monitor after braking the car. Connecting the reversing line to taillight on the car
7 After connecting, when you start up the reverse gear, the unit will receive the picture from car rear view camera. Note: - Only use groundless loudspeakers. - Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loudspeakers at higher volumes. - Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. - Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body (GND). The unit is using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram. - Loudspeaker cables and/or optional external power amplifiers must always be about 30cm away from the antenna and/or antenna extension parts. Connect the speakers according the following diagram, incorrect connections will damage the unit or your loudspeakers Correct connection Left front - Right front | Left rear - Right rear Incorrect connections
8 FRONT PANEL 1. IR Sensor IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 2. EJECT Button Press to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is reinserted automatically. 3. POWER/MUTE Button Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off .Press the button briefly to Mute .Please note that the volume will be muted on all audio output connector. 4. Main Menu Press menu button to go into home page. 5. VOLUME Button Adjust the volume level by turning the knob clockwise to increase or counterclockwise to decrease. 6. USB slot 7. RESET Button Press it with a thin, sharp object. The device will then be reset to factory default settings. 8. AUX Jack Connect an external audio source to the AUX-IN jack. 9. MIC 10.DISC Slot 11. Info Display Information Display LCD when operation the unit. 12. TF CARD slot TF card slot, for Multimedia playback files only. Insert a TF CARD into this slot and the unit will automatically start reading and playback the card. 8 9 8 9 8 9 1 2 3 4 5 6 7 8 9 10 11 12
9 REMOTE CONTROL 1. POWER Power on or off. 2. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 3. PLAY/PAUSE button In DVD mode, press it to pause playback, press again to resume. 4. Mute/Root button : Short press this button to mute the volume output, press it again to resume volume. 5. BAND/ RDM（Only for Bluetooth） In Radio mode, press to change radio band in sequence of FM1 → FM2 → FM3 → AM1 → AM2 In DVD mode, press it to play randomly. In Bluetooth mode, press it to clear number. 6. Cursor buttons Use the buttons to select the menu item, the title track or to show next frame. 7. MENU/ROOT button Short press it to show main menu,. In DVD mode, long press it to enter TITLE MENU (Enable only if the DVD disc with title menu). 8. SUBTITLE button Press it to select the subtitle language (Available only if the disc with subtitle function). 9. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 10. ENTER button Press it to confirm selection or setting.
10 11. Cursor buttons Use the buttons to select the menu item, the title track or to show next frame. 12. SETUP button In DVD mode press it to enter the setup menu. 13. EJECT button Press it to eject the disc. 14. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 15. ANGLE/ACCEPT button (Only for Bluetooth) In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded DVD file or DVD disc that has this function). In BLUETOOTH mode, press to make a call after inputted a phone number or accept an incoming call. 16. INT / REJECT button (Only for Bluetooth) Press it to activate the intro function. You can play the beginning of every track for 10 seconds in sequence. In BLUETOOTH mode, press to reject a coming call or hang up while calling. 17. P.SCN/ RPT In SD CARD/ USB mode, press to repeat REP 1 => REP DIR => REP ALL In DVD mode, press to start repeat REP OFF=>REP Chapter=>REP Title=>REP Off. In Radio mode: PS (Preset Scan): Press to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. AS (Auto Save): Long press to save the stations with good reception automatically. 18. STEREO/MONO (PTY only for RDS/ Bluetooth) Press STEREO button to select STEREO or MONO. 19. VOL+ button Press to increase volume level. 20. A-B/ZOOM button During playback, press it at the starting point of section you want to repeat(A), press this button again at the ending point of the section you want to repeat (B), section A-B repeating starts. Press it again to cancel the A-B repeat function. Press it and hold for two seconds in DVD mode to zoom the image in or out in the sequence of ZOOM 2-> ZOOM 3-> ZOOM 4-> ZOOM 1/2-> ZOOM 1/3-> ZOOM 1/4. 21. LOUD (only for RDS) Press to set LOUD on or OFF. 22. / seek- button In DVD mode, Press button to skip to the previous track. Press and hold button for two seconds to activate fast reverse (REW) search in a track. In RADIO mode, press button to start searching automatic, press and hold for two seconds to start manual searching. button Frequency down. 23. SEL button (only for RDS) Press it to enter the SOUND SETTING menu, and press Cursor UP/DN buttons to choose an item and press cursor left/right buttons to set the item. Press SEL button again to exit the menu. 24. / seek + button In DVD mode, Press button to skip to the next track, press and hold button for two seconds to activate fast forward (FF) search in a track. In RADIO mode, press button to start searching automatic, press and hold for two seconds to start manual searching button Frequency up. 25. STOP/PBC button Press it to Stop playback from the current position, press it again to final stop to the very beginning. Press PLAY/PAUSE button to play. Press and hold for two seconds to set PBC on/ off in VCD mode.
11 26. OSD button In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup. (RED /GREEN /BLUE /BRIGHT / CONTRAST /SHARP /COLOR RESET /BACK) 27. VOL- button Press to decrease volume level. 28. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO. Go to: in DVD mode，press and hold for 2 seconds to show TIME SEARCH menu, select number and confirm to go to certain position directly. When press button to enter TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or CHAPTER position directly. 29. Digit 0-9 buttons In radio mode, select 1-6 the desired band; In DVD mode, select track. Noted：The RC is the universal and full-featured. Some options are available with the corresponding model. REMOVE BATTERY Note:  The distance may vary according to the brightness of ambient light.  If the remote is not used for an extended period of time, remove the battery to prevent possible damage from battery leakage and corrosion.  Do not place any objects between the remote control unit and the sensor on the unit.  Do not drop the remote control onto the floor; it will damage it beyond repair.  Do not use the remote control unit, while simultaneously operating the remote control unit of any other equipment; they may interfere resulting in improper operation.  The battery normally last for about one year although depending how often the remote control is used. If the remote control unit isn‟t working even when it is operated near the unit, replace the battery with a new battery of the same make and use only a lithium cell battery type: CR2025 (3V).  Dispose empty batteries in accordance with your local governmental regulations.  Do not short-circuit, disassemble, heat or dispose of fire or flames the battery.  Keep the battery out of reach of children, should the battery be swallowed, immediately consult a doctor.
12 MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by tapping on the touch screen buttons. Tap the icons to enter a desired mode. ◆ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Touch this icon to select station forward manually. Touch and hold this icon to select station forward automatically. Touch this icon to select station backward manually. Touch and hold this icon to select station backward automatically. Touch this button can choose FM1=>FM2=>FM3=>AM1=>AM2. Touch it to select AM1=>AM2. Touch this button to search forward stations. Touch this button to search backward stations. Touch this button can turn on or turn off Local function. Touch this button to select Mono or Stereo sound reception. Touch this button can scan the stations from 1-6, Long Touch it to save the stations with good reception automatically and scan each station for about 5 seconds. Touch this button enter to Setting mode. Touch this button adjust the screen backlight to LOW-MID-HIGH. Touch this button enter to Home main menu. Touch this button adjust the EQ, it can choose User =>Rock =>Pop=> Jazz=>Electric =>Flat => User.
13 Note: When a radio signal is not received, the default for ST / MO function, once received radio function automatically converted to ST. ◆DVD PLAYER To start DVD Player, tap DVD icon from main menu screen. TOUCH SCREEN MENU Touch it to skip to the previous track. Touch and hold for 2 seconds to retune to the beginning of the track. Touch it to pause/play. Touch it to skip to the next track. Touch and hold for 2 seconds to activate fast forward (FF) search in a track. In DVD mode, touch it to select the audio language. In VCD mode, touch it to select the sound track in the sequence of mono L => mono R =>auto L => auto R =>stereo. Zoom the image in or out in the sequence of ×2,×3,×4,×5,×1/2,×1/3,×1/4. Touch it to setting Brightness=> Contrast=>Hue=>Saturation=>Sharpness. In DVD mode, touches it chooses REP 1=> REP Title => REP ALL=> REP off. In VCD mode, touch it can choose REP 1=> REP Title => REP ALL=> REP off. Touch it to turn on / turn off random playback. Touch it enter to next page. Touch it enter to previous page. Touch this button adjust the EQ, it can choose User =>Rock =>Pop=> Jazz=>Electric =>Flat => User. In DVD mode, touch it to select the subtitle language. In VCD mode touch it can choose PBC ON or OFF. Touch this button adjust the screen backlight to LOW-MID-HIGH. Touch this button enter to Setting mode. Touch it to select title. Touch it to select chapter. Note: 1. DVD Player will automatically start playing when you insert any DVD disc, MEMORY card or
14 USB device. 2. Warning displays if the vehicle is moving for driver's safety. 3. DVD Player will not only play video, but also picture and music files as well. ◆USB INTERFACE OPERATION USB When a USB is played, the screen will show following interface: To play MP3/ MP4 files from a USB flash memory, insert a USB flash memory into the USB port on the back of the unit. The unit will play automatically MP3/MP4//JPEG files. Press it to repeat REP 1 => REP DIR => REP ALL. Press it to skip to the previous track. Play/pause button. Press it to skip to the next track. Touch it to enter TITLE MENU (you can choose music, picture and Video to play). Press it to turn on / turn off track randomly playback. Press it to select title. Press it to select chapter. TF Card To play MP3/ MP4/ WMA/JPEG files on a TF card, insert the card into the card slot .The unit will play automatically MP3/MP4/ WMA/JPEG files. ◆SETTING CONTROL To start SETTING, tap SETUP icon on main menu. Your device has default system settings. You can customize the settings to suit your personal needs. Once you change settings, your new settings will remain until you change it again. OSD Language: English, Chinese Traditional, Thailand and Hebrew Radio Area: Europe, USA, South America, Russian and Asia. Time Setting: Setting the date and time. BEEP: Select keypad sound on or off. Version :The software version is just for your reference. Restore Default: Restore
15 Audio Language: Chinese, English, Japan, French, Spanish, Portuguese, Latin and German. Subtitle Language: Chinese, English, Japan, French, Spanish, Portuguese, German and Off. Menu Language: Chinese, English, Japan, French, Spanish, Portuguese, German and Off. Sound Effect: Adjust EQ and balance surround and field. Subwoofer: Select the frequency 80Hz→120Hz→60Hz →off. Loudness: Turn loudness on or off. Loud Cutoff Freq:400Hz→800Hz→2400Hz. Aspect Ratio: 4:3PS→4:3LB→16:9. Adjust: adjust the screen backlight to LOW-MID-HIGH. Panel: Adjust dimmer, back light and panel light. Auto Connect: Select auto connect phone on or off. Auto Answer: Select auto answer phone on or off. BULETOOTH SCETION Warning: Driving and having a Telephone conversation at the same time is dangerous, please park your car before having a telephone conversation. The supplier waves any and all liability when this warning is not followed. To enter Bluetooth mode, you can tap Bluetooth icon on Main menu or long press the mute/Bluetooth button on the Remote Control or press mode button on remote or on front panel.
16 A user can make own choice by tap the buttons. Tap Dial button to enter call mode. Tap In calling button to check received calls. Tap Out calling button to check dialed cal Tap Missed calling button to check missed calls. Tap Phone Book button to use phone book functions. Tap Music button to start Bluetooth Music player. Tap this icon delete paired phone. Tap this button turn to next page. Tap this button turn to previous page. Tap this button disconnected phone. Tap this icon translate Bluetooth to mobile phone mode. Tap this icon to clear number. Tap this button Making and accept calling. Tap this button Hand up and reject calling. Pairing Mode At the 1st time when using BLUETOOTH, you need to pair the mobile phone first.When a phone have not been paired with the unit, the BT icon and Pairing mark will blink continually on the panel. When the unit have connect with phone, the BT icon will turn on and the Mobile phone name (if available) will be display on the panel. According to mobile pairing device manual,after searching new device(NESA), select it, input password "0000" and confirm ok, device paring is finished. The text „Enter Number‟ will shows on the panel after the pairing is completed. It means device is connected and ready for BLUETOOTH communication. Auto-connect – Disconnect When power on the unit, the last paired phone will be connected to the device via Bluetooth automatically, after searching about one minute, if the device cannot find the paired phone, it will stop searching. When in standby mode (unconnected), long press Bluetooth button on remote control to active auto-connect function and the device will search the last paired phone. If you want to disconnect the Bluetooth connection, turn off the Bluetooth on the phone. 1. Dial BUTTON Tap on Dial button to enter call mode. In Call mode, the unit can be used as your phone. Making and receiving calls are possible with BLUETOOTH. Simply tap phone number and tap button to make a call, and tap button to hang up. 1.) Tap button shortly to delete a wrong digit, or press Reject/INT button on remote to delete all the numbers at once. 2) Tap button the device automatically makes a call to the latest call in its call log. Voice Transfer During a call, you can change a call from Bluetooth mode to phone by tapping Transfer button. To have a call in Bluetooth mode again, tap Transfer button. NOTE: the phonebook only supports Western Characters. Any difference in character will be shown such as “+, * or # ”
17 2. In calling/Out calling mode Tap In calling button or Out calling to see received and dialed calls.The unit can download automatically all the date from the mobile Phone.Dialed/Received/Missed calls are saved In History mode .Tap Up/Down arrow load previous/next history record.The calls in each category are saved from the latest one to the final one.Select a number and tap Send button to enter calling mode. 3. BT PHONE BOOK The unit can download the data from phone, when the pairing between a phone and the unit automatically completed. The unit displays the data which have been downloading from a phone. Select a number and tap Send button to make a calling. 4. (A2DP) Music Mode Tap Music button to listen music in Bluetooth mode. You can select the function with the key for previous, play or pause,stop and next. A2DP (Advanced Audio Distribution Profile) Music Player A2DP is a function which can receive the audio frequency signal from the mobile phone, amplified by the car audio and played out by the car speakers. Notice: your mobile phone need to support A2DP. Tap the buttons on the screen as shown, or press corresponding buttons (PAUSE/PLAY, STOP, PREVIOUS/NEXT) on remote control to play, pause, play previous, or next music file. AUX IN MODE To start AUX-IN Mode, tap on AUX-IN button from main menu screen.Connect the external audio source to this unit. Select AUX-IN mode in the main menu. OTHER FUNCTIONS Subwoofer Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on screen enter into main menu setting choose setting menu. Choose SOUND and set subwoofer ON to enable subwoofer. Parking When the car is stopped and the parking brake is working, the screen can display the video image, otherwise the screen can't display the video image Back View Camera This unit is equipped with back view camera output. The camera is used to observe the situation behind the vehicle when you are backing the car. Please connect your back view camera with the back car video input. And connect the reverse wire for back a car with the rear gear light. Rear view camera picture will be enabled when you are backing the car.
18 NOTES ON DISC  Only use groundless loudspeakers.  Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes.  Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit.  Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body.  (GND). using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram.  Loudspeaker cables and/or optional external power amplifiers must always be about 30cm. away from the antenna and/or antenna extension parts.  If want to display for 7” TFT, parking wire must be connected to ground.
19 TROUBLESHOOTING Symptom Cause Remedy General Power does not turn on. (No sound is produced.) Fuse is blown Replace with fuse of the same amperage. If the fuse blows again, consult your store of purchase In correct wiring Consult your local retailer. No sound output when operating the unit with amplifiers or power antenna attached. Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage (excessive current required). Nothing happens when buttons are pressed. Display is not Accurate The microprocessor has malfunctioned due to noise, etc. Turn off the power, Then press the [no open] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Panel or main unit Connectors are dirty Wipe the dirt off with a soft cloth moistened with cleaning alcohol. CD Sound is bad directly after power is turned on. Compact disc is dirty Clean the compact disc without scratches Compact disc is heavily scratched or warped Replace with a compact disc without scratches. Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place Let it dry for about 1 hour with the power on. LCD Small LCD display error massage When deck mechanism error, show ERROR 1 Reset the unit. When disc or servo error, it show ERROR 2 Change the disc or reset the unit. When USB error, t show ERROR 3 1.Remove the USB and insert it again 2. File error，please check the file. 3. Reset the unit.
20 TROUBLESHOOTING SYMPTOM CAUSE SOLUTION NO POWER THE CAR IGNITION IS NOT ON. IF THE POWER SUPPLY IS PROPERLY CONNECTED TO THE CAR ACCESSORY SWITCH THE IGNITION KEY TO “ACC”. THE FUSE IS BLOWN. REPLACE THE FUSE. DISC CANNOT BE LOADED. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. DISC CANNOT BE READ. INSERTING THE DISC IN UPSIDE DOWN. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. COMPACT DISC IS EXTREMELY DIRTY OR DEFECTIVE. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. TEMPERATURE INSIDE THE CAR IS TOO HIGH. COOL OFF UNTIL THE AMBIENT TEMPERATURE RETURNS TO NORMAL. NO SOUND VOLUME IS IN MINIMUM. ADJUST VOLUME TO A DESIRED LEVEL. WIRING IS NOT PROPERLY CONNECTED. CHECK WIRING CONNECTION. THE OPERATION KEYS DO NOT WORK. THE BUILT-IN MICROCOMPUTER IS NOT OPERATING PROPERLY DUE TO NOISE. PRESS THE POWER BUTTON FOR ABOUT 10 SECONDS TO RESET THE UNIT. FRONT PANEL IS NOT PROPERLY FIX INTO ITS PLACE. SOUND SKIPS. THE INSTALLATION ANGLE IS MORE THAN 30 DEGREES. ADJUST THE INSTALLATION ANGLE TO LESS THAN 30 DEGREES. THE DISC IS EXTREMELY DIRTY OR DEFECTIVE. CLEAN THE COMPACT DISC/TRY TO PLAY A NEW ONE. THE RADIO DOES NOT WORK, THE RADIO STATION AUTOMATIC SELECTION DOES NOT WORK. THE ANTENNA CABLE IS NOT CONNECTED THE SIGNALS ARE TOO WEAK. INSERT THE ANTENNA CABLE FIRMLY SELECT A STATION MANUALLY.
21 TECHNICAL SPECIFICATIONS General Power supply: 11~16V DC Current consumption: max. 10 A Maximum power output: 4 x 50W channels (max) Compatible formats: DVD/ VCD/ MP3/MP4/VIDEO /CD/CD-R/-RW/DVD±R/±RW/PICTURE PLAYBACK Dimensions (W x D x H) / weight: 178*170*100 mm/2 kg Working temperature range: -20℃ - +60℃ ESP function: 10 sec. for Audio CD, 120 sec. for MP3 TFT display Screen size: 6.5inch Resolution: 800*480 pixel Aspect ratio: 4:3/16:9 Brightness: 460 cd/㎡ Contrast ratio: 500:1 FM Stereo Radio Frequency range(Europe Area): 87.5 – 108MHz(Step 50KHz) Frequency range(U.S.A Area): 87.5 – 107.9MHz(Step 100KHz) Frequency range( South America Area): 87.5 – 108MHz(Step 50KHz) 65-74MHz(Step 10KHz) Frequency range(Russian Area): 87.5 – 107.9MHz(Step 200KHz) Frequency range(Asia Area): 87.5 – 108MHz(Step 100KHz) Preset memory stations: 18 AM/MW Radio Frequency range(Europe Area): 522kHz - 1620 KHz(Step 9KHz) Frequency range(U.S.A Area): 530kHz - 1710 KHz(Step 10KHz) Frequency range(South America Area): 520kHz - 1710 KHz(Step 10KHz) Frequency range(Russian Area): 522kHz - 1620 KHz(Step 9KHz) Frequency range(Asia Area): 531kHz - 1602 KHz(Step 10KHz) Preset memory stations: 12 Audio specification Frequency response: 20 Hz-20 KHz USB interface USB type USB 2.0 full speed Support format mp3 , wma, mpeg1, mpeg2, avi Specifications are subject to change without notice. Mass and dimension are approximate.
23
24
FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 25

Navigation menu