TOKWA PRECISION TECHNOLOGY VR-651B Car Radio User Manual
SHENZHEN TOKWA PRECISION TECHNOLOGY CO., LTD. Car Radio
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2971823 |
| Application ID | r6TFYUfx6e5Ec6e/W02Jyw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 203.75kB (2546910 bits) |
| Date Submitted | 2016-04-27 00:00:00 |
| Date Available | 2016-04-27 00:00:00 |
| Creation Date | 2016-04-19 16:25:35 |
| Producing Software | Acrobat Distiller 9.3.2 (Windows) |
| Document Lastmod | 2016-04-19 16:26:33 |
| Document Title | User Manual |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | PRD004 |
VR-651/VR-651B 2 DIN 6.5” Monitor Touch Screen DVD/CD/MP3/MP4 AM/FM Radio Support Bluetooth (Only for VR-651B model) Owner’s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver. WARNING! To promote safety, certain functions are disabled unless the parking brake is on. The Unit is designed to detect parked status and must be connected to the power supply side of the parking brake switch. Improper connection or use of his connection may violate applicable law and may result in serious injury or damage. To avoid the risk of damage and injury and the potential violation of applicable laws, this unit is not for use with a video screen that is visible to the driver. To avoid the risk of accident and the potential violation of applicable laws, the front Video image feature should never be used while the vehicle is being driven. Also, other video displays should not be in a location where it is a visible distraction to the driver. In some countries or states the viewing of images on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed and this unit’s DVD features should not be used. Please remember to wear your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled. The supplier waves any and all liability when these warnings are not followed. OPERATION PRECAUTIONS Only connect to a 12Vdc battery and negative grounding. Avoid placing the product in direct sunlight, in areas with high levels of dust, high temperatures (over 40°C) or high humidity (over 90%). In case of high temperatures, cool down the car interior by means of ventilation or air-conditioning. Operate in well ventilated areas. Do not turn on or off the product in short intervals. When turning the unit off, wait for at least 10 seconds prior to turning the unit on again. Do not operate the player with scratched, bended or broken discs and when a disc is not loaded properly, do not force it into the player. Do not watch video playback while driving which will cause serious danger and risks of traffic accident. It may violate the laws and regulations. (There may be exceptional case, i.e., using rear view camera and navigation system) Do not install the unit where the operation for safety driving is restrained. Do not disassembly the unit by yourself, if need repairing, please take the unit to the after service center. Do not open and close the monitor manually, it may damage the monitor tilt system. Do not touch the LCD screen by hard objects, it may damage or give scratch to the LCD screen. If the back of monitor touches dashboard or air-conditioner inlet etc after open the monitor , then setup TILT level in monitor TILT menu to prevent damage from repeat touching. Car parking under direct sunlight may increase the temperature inside the car and the unit may not be in proper operation, please try it again after the temperature returns to normal. Do not replace the fuse on the power cable without professional guidance, using improper fuse may cause damage to the unit or even cause burn the unit. Do not use irregular shaped Disk. IR remote control operation may be hindered by monitor when the monitor is opened, thus please use the remote control at the similar level of remote control receiver. Do not install the unit where the cooling fan is blocked. CONTENTS WARNING! ................................................................................................................. 2 OPERATION PRECAUTIONS .................................................................................... 2 CONTENTS ................................................................................................................ 3 ACCESSORIES .......................................................................................................... 4 INSTALLATION / UN-INSTALLATION ....................................................................... 5 WIRING CONNECTIONS ........................................................................................... 6 PANEL………....……………………………………………………………………………....7 REMOTE CONTROL .................................................................................................. 8 REMOVE BATTERY ................................................................................................. 10 MAIN MENU ............................................................................................................. 10 ƹ RADIO PLAYER ................................................................................................... 10 ƹ DVD PLAYER ...................................................................................................... 11 ƹUSB/SD/MMC OPERATION ................................................................................. 12 ƹAV-IN MODE ......................................................................................................... 13 ƹSETTING CONTROL ............................................................................................ 13 BLUETOOTH SECTION(Only for VR-651B model) .................................................. 14 STEERING WHEEL CONTROL ............................................................................... 15 OTHER FUNCTIONS ............................................................................................... 15 NOTES ON DISC ..................................................................................................... 16 TROUBLESHOOTING .............................................................................................. 17 TROUBLESHOOTING .............................................................................................. 18 TECHNICAL SPECIFICATIONS ............................................................................... 19 BLUETOOTH CONNECTION ATTENTION INSTRUCTIONS .................................. 20 VIDEO FILE CONVERSION ..................................................................................... 21 ACCESSORIES Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring Washer, M5 Nut 1 each (2) Mounting Strap (3) Bolt (4) Screw (5) Mounting Collar (6) Release Key (7) Screw (8) Rubber Cushion Remote Control Warranty card User Manual Power cable Trim ring Noted: Product image may vary from the actual delivery Installation/Un-Installation Note Before starting installation of the unit, make sure the wiring is connected properly. Use only the parts provided with the unit to ensure proper installation. The use of unauthorized parts may cause malfunction. Install the unit where it does not get in the driver’s way and will not injure the passenger in case there is a sudden stop, like an emergency stop. INSTALLATION ˄Figure 1˅ Insert the unit into dash-board hole and fix it If necessary, place the mount strap at the rear of the unit and fix it with provided washer as figure 2. Place Trim Ring over the unit and installation is completed as figure 1. UN-INSTALLATION Insert the supplied extraction keys into the unit and pull the unit out with keeping the extraction keys. (as Figure. 4) Figure 4 Wiring Connections Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection. Caution: Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit. 3. Cut the connector; connect the colored leads of the power cord to the car battery as shown in the color code table below for speaker and power cable connections. Function Ground--Black Battery 12V (+)---Yellow Auto Antenna---Blue Steering Wheel Control---Blue/Black Parking (GND)---Brown Rear Right(+)---Purple Rear Right(-)---Purple/Black Stripe Front Right(+)---Grey Front Right(-)---Grey/Black Stripe Reverse 12V (+)--Pink Power 12V(+)--Red Front Left(+)---White Front Left(-)---White/Black Stripe Rear Left(+)---Green Rear Left(-)---Green/Black Stripe PANEL 1. IR Sensor IR Remote control signal receiving window. Max distance is 6-8 meters, 45 angels. 2. VOL Button Rotate VOL to increase or decrease the volume. Press it to show the main menu. 3. POWER/MUTE Button Press it to turn on the unit. Press and hold for 2 seconds to turn the unit off .Press the button briefly to Mute .Please note that the volume will be muted on all audio output connector. 4. MODE Button Press it to select the mode: Radio, DVD (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 5. EJECT Button Press to eject a disc. If the disc is not removed for about 10 seconds after eject, the disc is reinserted automatically. 6. USB slot USB slot, for Multimedia playback files only. Insert a USB into this slot and the unit will automatically start reading and playback the card. * Supported Music File Format: MP3, WMA Files. 7. AUX Jack Put the AV plug into the AV-IN jack which was marked on front panel. 8. Reset slot 9. DISC slot 10. Info Display Information Display LCD when operation the unit. REMOTE CONTROL 1. POWER Power on or off. 2. MODE button Press it to select the mode: Radio, DISC (if there is a disc in unit), USB (if there is a USB device in the unit), CARD (if there is a SD/MMC card in the unit) and AV IN. 3. PLAY/PAUSE button In DVD mode, press it to pause playback, press again to resume. 4. Mute/Root button : Short press this button to mute the volume output, press it again to resume volume. 5. BAND/ RDM˄Only for Bluetooth˅ In Radio mode, press to change radio band in sequence of FM1 FM2 FM3 AM1 AM2 In DVD mode, press to play randomly. 6. Cursor buttons Use the buttons to select the menu item, the title track or to show next frame. 7. MENU/ROOT button Short press it to show main menu,. In DVD mode, long press it to enter TITLE MENU (Enable only if the DVD disc with title menu). 8. SUBTITLE button Press it to select the subtitle language (Available only if the disc with subtitle function). 9. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 10. ENTER button Press it to confirm selection or setting. 11. Cursor buttons Use the buttons to select the menu item, the title track or to show next frame. 12. SETUP button In DVD mode press it to enter the setup menu. 13. EJECT button Press it to eject the disc. 14. Cursor buttons Use the buttons to select the menu item. the title, track or to show next frame. 15. ANGLE/ACCEPT button (Only for Bluetooth) In DVD mode, press it repeatedly to change the viewing angle (Available only with a recorded DVD file or DVD disc that has this function). In BLUETOOTH mode, press to make a call after inputted a phone number or accept an incoming call. 16. INT / REJECT button (Only for Bluetooth) Press it to activate the intro function. You can play the beginning of every track for 10 seconds in sequence. In BLUETOOTH mode, press to reject a coming call or hang up while calling. 17. P.SCN/ RPT In SD CARD/ USB mode, press to repeat REP 1 => REP DIR => REP ALL In DVD mode, press to start repeat REP OFF=>REP Chapter=>REP Title=>REP Off. In Radio mode: PS (Preset Scan): Press to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. AS (Auto Save): Long press to save the stations with good reception automatically. 18. STEREO/MONO (PTY only for RDS/ Bluetooth) Press STEREO button to select STEREO or MONO. 19. VOL+ button Press to increase volume level. 20. A-B/ZOOM button During playback, press it at the starting point of section you want to repeat(A), press this button again at the ending point of the section you want to repeat (B), section A-B repeating starts. Press it again to cancel the A-B repeat function. Press it and hold for two seconds in DVD mode to zoom the image in or out in the sequence of ZOOM 2-> ZOOM 3-> ZOOM 4-> ZOOM 1/2-> ZOOM 1/3-> ZOOM 1/4. 21. LOUD (only for RDS) Press to set LOUD on or OFF. 22. / seek- button In DVD mode, Press button to skip to the previous track. Press and hold button for two seconds to activate fast reverse (REW) search in a track. In RADIO mode, press button to start searching automatic, press and hold for two seconds to start manual searching. button Frequency down. 23. SEL button (only for RDS) Press it to enter the SOUND SETTING menu, and press Cursor UP/DN buttons to choose an item and press cursor left/right buttons to set the item. Press SEL button again to exit the menu. 24. / seek + button In DVD mode, Press button to skip to the next track.Press and hold button for two seconds to activate fast forward (FF) search in a track. In RADIO mode, press button to start searching automatic, press and hold for two seconds to start manual searching button Frequency up. 25. STOP/PBC button Press it to Stop playback from the current position, press it again to final stop to the very beginning. Press PLAY/PAUSE button to play. Press and hold for two seconds to set PBC on/ off in VCD mode. 26. OSD button In DVD mode press it to enter the OSD menu, press and hold for 2 seconds to set video setup. (RED /GREEN /BLUE /BRIGHT / CONTRAST /SHARP /COLOR RESET /BACK) 27. VOL- button Press to decrease volume level. 28. AUDIO/GOTO button In DVD mode press it to select the audio language. In VCD mode, press it to select the sound track in the sequence of MONO L =>MONO R =>STEREO. Go to: in DVD modeˈpress and hold for 2 seconds to show TIME SEARCH menu, select number and confirm to go to certain position directly. When press button to enter TITLE/CHAPTER selection mode, select number and confirm to go to certain TITLE or CHAPTER position directly. 29. Digit 0-9 buttons In radio mode, select 1-6 the desired band; In DVD mode, select track. Noted˖The RC is the universal and full-featured. Some options are available with the corresponding model. REMOVE BATTERY Note: The distance may vary according to the brightness of ambient light. If the remote is not used for an extended period of time, remove the battery to prevent possible damage from battery leakage and corrosion. Do not place any objects between the remote control unit and the sensor on the unit. Do not drop the remote control onto the floor; it will damage it beyond repair. Do not use the remote control unit, while simultaneously operating the remote control unit of any other equipment; they may interfere resulting in improper operation. The battery normally last for about one year although depending how often the remote control is used. If the remote control unit isn’t working even when it is operated near the unit, replace the battery with a new battery of the same make and use only a lithium cell battery type: CR2025 (3V). Dispose empty batteries in accordance with your local governmental regulations. Do not short-circuit, disassemble, heat or dispose of fire or flames the battery. Keep the battery out of reach of children, should the battery be swallowed, immediately consult a doctor. MAIN MENU The best way to discover the program is to explore each screen in detail, and to find out how to move from one to another. Read this chapter for a guided tour. Unit starts by displaying the Main menu. This is the root of the screen hierarchy, and you can simply access all features by tapping on the touch screen buttons. Tap the icons to enter a desired mode. 10 ƹ RADIO PLAYER To start Radio, tap RADIO button on main menu screen. Touch this icon to select MUTE ON or OFF. Touch this icon to select EQ POPėROCKėCLASSėJAZZFLATėOFF Touch this icon to choose the bands: FM1, FM2, FM3, AM1, AM2. Touch this icon to select LOUD ON or OFF. Touch this icon select LOC ON/OFF or DX for distance station. Touch this icon select stereo or mono sound reception. Slide this icon to select stations. Touch this icon to select station forward manually. Touch and hold this icon to select station forward automatically. Touch this icon to select station backward manually. Touch and hold this icon to select station backward automatically. Touch this icon to back to the main menu. ƹ DVD PLAYER To start DVD Player, tap on DVD button from main menu screen. You will not see any buttons while DVD is played. Buttons will appear when you tap on TFT screen. Tap the screen again to hide the buttons. NOTE 1. DVD Player will automatically start playing when you insert any DVD disc, MEMORY card or USB device. 2. Warning displays if the vehicle is moving for driver's safety. 3. DVD Player will not only play video, but also picture and music files as well. 11 Touch it to pause/play. Touch it to present stop. Touch it to skip to the previous track. Touch and hold for 2 seconds to retune to the beginning of the track. Touch it to skip to the next track. Touch and hold for 2 seconds to activate fast forward (FF) search in a track. Start fast rewind or fast forward. Press one of the keys again to change the spooling speed. Press the Play key to regain normal playback. Touch it to turn on / off random playback. Touch it to enter to next page menu. Touch it to select: repeat 1 => repeat ALL=>repeat DISC=> repeat OFF. Touch it to show display playback progress. Touch it to show DVD main. Touch this button to return to the title. Select the preferred language for the subtitles Touch it to select Audio. Touch it to select playback track or chapter. ƹUSB/SD/MMC OPERATION When a file disc, USB or a memory card is played, the screen will show following interface: Touch it to select music files. Touch it to select photo files. Touch it to select video files. Touch it to enter to next page menu. Touch it to enter to previous page menu. Touch it to return menu. Touch it to present stop. Touch it to skip to the previous track. Touch it to pause/play. Touch it to skip to the next track. Touch it to turn on / off random playback. Touch it to select: repeat all=>repeat 1=> repeat off. Touch it to show playlist. 12 ƹAV-IN MODE To start AV-IN Mode, tap on AV-IN button from main menu screen. Connect the external audio/video signal source to this unit. Select AV-IN mode in the main menu or by pressing repeat Mode button on the front panel. Note: If there is no external video input, the TFT displays “NO SIGNAL”. ƹSETTING CONTROL To start SETTING, tap SETUP icon on main menu. Your device has default system settings. You can customize the settings to suit your personal needs. Once you change settings, your new settings will remain until you change it again. TIME: Adjust the digital time. DATE: Adjust the digital date. BEEP: Select keypad sound on or off. CALIBRATION: Touch screen and adjustment. SWC: Steering wheel control. LANGUAGE: Select different language. EQ: Select the EQ type. VOL: Adjust the digital volume. TREBLE: Select the digital treble effect. BASS: Select the digital bass effect. LONDNESS: Selecting loudness ON will emphasize the low frequency output. FADER: Front/rear Fader control. STANDARD: Select the digital of standard. BRIGHT: Select the digital of bright. SOFT: Select the digital of soft. USER: Select the digital of user. RDS: Select RDS OFF or ON. BLUETOOTH: Select BT OFF or ON. HEADLIGHT: Select headlight OFF or ON. BRAKE: Select brake OFF or ON. RADIO AREA: USA1USA2RussiaJapanEurope 13 BLUETOOTH SECTION(Only for VR-651B model) Warning: Driving and having a telephone conversation at the same time is dangerous, please park your car before having a telephone conversation. The supplier waves any and all liability when this warning is not followed. To enter Bluetooth mode, please tap Bluetooth icon on main menu or press mode button on remote. Bluetooth connected mode Tap the icon phone. to turn to the interface as above, and open the BT function on the mobile Pairing Mode At the 1st time when using BLUETOOTH, you need to pair the mobile phone first. When a phone has not been paired with the unit, the BT icon and Pairing mark will blink continually on the panel. When the unit have connect with phone, the BT icon will turn on and the Mobile phone name (if available) will be display on the panel. According to mobile pairing device manual, after searching new device (Sound Stream), select it, input password "0000" and confirm ok, device paring is finished. The text ‘Enter Number’ will shows on the panel after the pairing is completed. It means device is connected and ready for BLUETOOTH communication. Auto-connect & Disconnect icon on the When power on the unit, the last paired phone will be remembered. Tap the unit, it will connect to the phone via Bluetooth automatically. If you want to disconnect the Bluetooth connection, turn off the mobile phone Bluetooth function, icon on the unit. or tap the 1. CALLING mode In Call mode, the unit can be used as your phone. Making and receiving calls are possible with BLUETOOTH. Simply tap phone number and tap icon to hang up. icon to make a call, and tap 1) Tap icon shortly to delete a wrong digit. icon, the device automatically makes a 2) Tap the call to the latest call in its call log. Voice Transfer During a call, you can change a call from Bluetooth mode to phone by tapping have a call in Bluetooth mode again, tap Transfer icon again. 2. Call history mode 14 icon. To Tap icon to see dialed calls history mode. Tap icon to see received calls history mode. Tap icon to see missed calls history mode. The unit can download automatically all the date from the mobile Phone. Dialed /Received/Missed calls are saved In History mode. The calls in each category are orderly saved from the latest one to the final one.. 3. BT MUSIC to listen music in BT mode. You can select the After connect the mobile phone, tap function with the icon for previous, play / pause, and next. Note: in this mode the ID3 and present information can just display iPhone, other phone may not display this information. STEERING WHEEL CONTROL Tap SWC icon to set steering wheel control function. OTHER FUNCTIONS Subwoofer Connect the subwoofer to the unit using sub output (see electrical diagram). Tap MENU on screen enter into main menu setting choose setting menu. Choose SOUND and set subwoofer ON to enable subwoofer. Parking When the car is stopped and the parking brake is working, the screen can display the video image, otherwise the screen can't display the video image. Back View Camera This unit is equipped with back view camera output. The camera is used to observe the situation behind the vehicle when you are backing the car. Please connect your back view camera with the back car video input. And connect the reverse wire for back a car with the rear gear light. Rear view camera picture will be enabled when you are backing the car. 15 NOTES ON DISC Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body. (GND).Using a BTL circuit and each loudspeaker must be connected with insulated cables according the diagram. Loudspeaker cables and/or optional external power amplifiers must always be about 30cm. away from the antenna and/or antenna extension parts. If want to display for 7” TFT, parking wire must be connected to ground. 16 TROUBLESHOOTING Symptom LCD CD General Power does not turn on. (No sound is produced.) No sound output when operating the unit with amplifiers or power antenna attached. Cause Remedy Fuse is blown In correct wiring Power antennal lead is shorted to ground excessive current is required or remote on the amplifiers or power antenna. Nothing happens The microprocessor when buttons are has malfunctioned pressed. due to noise, etc. Display is not Accurate Panel or main unit Connectors are dirty Compact disc is Sound is bad directly dirty after power is turned Compact disc is on. heavily scratched or warped Water droplets may Sound is bad directly form on the internal after power is turned lens when the car is on. parked in a humid place When deck mechanism error, it show ERROR 1 When disc or servo error, it show Small LCD display ERROR 2 error massage When USB error, it show ERROR 3 When SD error, it show ERROR 4 17 Replace with fuse of the same amperage. If the fuse blows again, consult your store of purchase Consult your local retailer. 1. Turn off the unit. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter. 3. Turn on the unit. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external replay to provide remote-on voltage (excessive current required). Turn off the power, Then press the [no open] button and remove the DCP. Press the reset button for about 2 seconds with a thin rod. Wipe the dirt off with a soft cloth moistened with cleaning alcohol. Clean the compact disc without scratches Replace with a compact disc without scratches. Let it dry for about 1 hour with the power on. Reset the unit. Change the disc or reset the unit. 1.Remove the USB/SD and insert it again 2. File errorˈplease check the file. 3. Reset the unit. TROUBLESHOOTING SYMPTOM NO POWER DISC CANNOT BE LOADED. CAUSE THE CAR IGNITION IS NOT ON. THE FUSE IS BLOWN. REPLACE THE FUSE. PRESENCE OF DISC INSIDE THE PLAYER REMOVE THE DISC IN THE PLAYER THEN PUT A NEW UPWARD. INSERT THE COMPACT DISC WITH THE LABEL FACING UPWARD. CLEAN THE DISC OR TRY TO PLAY A NEW ONE. INSERTING THE DISC IN UPSIDE DOWN. DISC CANNOT BE READ. SOLUTION IF THE POWER SUPPLY IS PROPERLY CONNECTED TO THE CAR ACCESSORY SWITCH THE IGNITION KEY TO “ACC”. COMPACT DISC IS EXTREMELY DIRTY OR DEFECTIVE. TEMPERATURE INSIDE THE CAR IS TOO HIGH. COOL OFF UNTIL THE AMBIENT TEMPERATURE RETURNS TO NORMAL. VOLUME IS IN MINIMUM. ADJUST VOLUME TO A DESIRED LEVEL. WIRING IS NOT PROPERLY CONNECTED. CHECK WIRING CONNECTION. NO SOUND THE OPERATION KEYS DO NOT WORK. SOUND SKIPS. THE RADIO DOES NOT WORK, THE RADIO STATION AUTOMATIC SELECTION DOES NOT WORK. THE BUILT-IN MICROCOMPUTER IS NOT OPERATING PROPERLY DUE TO NOISE. FRONT PANEL IS NOT PROPERLY FIX INTO ITS PLACE. THE INSTALLATION ANGLE IS MORE THAN 30 DEGREES. THE DISC IS EXTREMELY DIRTY OR DEFECTIVE. ADJUST THE INSTALLATION ANGLE TO LESS THAN 30 DEGREES. CLEAN THE COMPACT DISC/TRY TO PLAY A NEW ONE. THE ANTENNA CABLE IS NOT CONNECTED THE SIGNALS ARE TOO WEAK. INSERT THE ANTENNA CABLE FIRMLY SELECT A STATION MANUALLY. 18 PRESS THE POWER BUTTON FOR ABOUT 10 SECONDS TO RESET THE UNIT. TECHNICAL SPECIFICATIONS General Power supply: Current consumption: Maximum power output: Compatible formats: Dimensions (W x D x H) / weight: Working temperature range: ESP function: 11~16V DC max. 10 A 50W x 4 channels (max) DVD/SVCD/VCD/HDCD/MP3/MP4/VIDEO/CDDA/Picture CDCD-R/-RW/DVD±R/±RW playback 185*115*160 mm/2 kg -20ć - +60ć 10 sec. for Audio CD, 120 sec. for MP3 TFT Display Screen size: Resolution: Aspect ratio: Brightness: 6.5inch 800*480 pixel 4:3/16:9 400 cd FM Stereo Radio Frequency range(EUROPE AREA): Frequency range(SOUTH AMERICA AREA) Frequency range(ASIA AREA) 87.5 – 108MHz(Step 50KHz) 87.5 – 108MHz(Step 100KHz) 87.5 – 108MHz(Step 50KHz) 65-74MHz(Step 10KHz) 87.5 – 107.9MHz(Step 200KHz) 18 Frequency range(U.S.A AREA) Preset memory stations: AM/MW Radio Frequency range(EUROPE AREA): Frequency range(SOUTH AMERICA AREA) Frequency range(ASIA AREA) Frequency range(U.S.A AREA) Preset memory stations: Audio specification Frequency response: 20 Hz-20 KHz 522kHz - 1620 KHz(Step 9KHz) 520kHz - 1710 KHz(Step 10KHz) 531kHz - 1602 KHz(Step 9KHz) 530kHz - 1710 KHz(Step 10KHz) 12 Specifications are subject to change without notice. Mass and dimension are approximate. 19 FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Author : PRD004 Create Date : 2016:04:19 16:25:35+08:00 Modify Date : 2016:04:19 16:26:33+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : Acrobat Distiller 9.3.2 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:04:19 16:26:33+08:00 Format : application/pdf Title : Microsoft Word - PS15115开始使用 -VR-651 增加BT,视频指示卡 20151222 Creator : PRD004 Document ID : uuid:f81c23d4-2b8f-4495-a7ce-14be85e9ae1e Instance ID : uuid:1ceb52ee-91be-4e5f-a971-0bdc9d58a224 Page Count : 23EXIF Metadata provided by EXIF.tools