TOMTOP Technology LB2 KOOGEEK WIFI SMART LED LIGHT BULB User Manual LB2 2

Shenzhen TOMTOP Technology Co., Ltd. KOOGEEK WIFI SMART LED LIGHT BULB LB2 2

User Manual

LIGHT BULBQUICK START GUIDEQUICK START GUIDEOperation is Subject to the Following Two ConditionsThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.The distance between user and products should be no less than 20cmThis device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the follow two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) Cet appareil ne doit pas provoquer d'interférences et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.fFollow Koogeek www.facebook.com/koogeek1. Screw the Smart Light Bulb into a desired light socket. The Smart Light Bulb will light up in warm white to indicate it is ready for network setup.2. Make sure your iPhone or iPad (iOS 8.1 or later) is connected to a 2.4GHz Wi-Fi network. Using the router utility software, shutdown 5GHz Wi-Fi networks. 3. Download and open the free Koogeek Home app from the App Store.4. Log in or sign up for a Koogeek account or simply tap Skip.5. Tap “+” on the top right corner and follow the on-screen directions to complete network setup.6. When prompted, scan the setup code or manually enter the setup code, and then follow the step to add the device to the Home and Room. Please keep the setup code for future use.7. You can assign a name to your Smart Light Bulb and use this name when speaking to Siri. For example, you can name your Smart Light Bulb “Bedroom Light”, then launch Siri and speak “Turn on the Bedroom Light”.8. Set up customized scenes to control multiple devices with a single command. For example, if you assign the “I'm going to bed” command to the scene of turning off bedroom light and turning on the living room light, when you speak “I'm going to bed” to Siri, everything is done. 9. For troubleshooting visit www.koogeek.com Note:The use of a HomeKit-enabled accessory need the follow permissions: Settings > iCloud > iCloud Drive > Turn OnSettings > iCloud > Keychain > Turn OnSettings > Privacy > HomeKit > Koogeek Home > Turn OnSafety WarningsTurn off power before inspection, installation and removal.For indoor use onlyRemove Smart Light Bulb from the light socket before cleaningDO NOT clean with liquidDO NOT use in wet or damp areasKeep children away from Smart Light BulbDO NOT exceed the recommended electrical ratingsDO NOT use with dimmersDO NOT use in enclosed environmentsLegalUse of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 10.1 or later or an iPad with iOS 10.1 or later set up as a home hub.Note: To add more light bulbs (or repeat the Smart Light Bulb setup process), tap “+” and you will see the accessory list. Each accessory has an identification code, e.g., Koogeek-XXX-XXXXXX. Make sure the last 6 characters of the identification code is consistent with the last 6 characters of MAC on your Smart Light Bulb. Smart Light Bulb OverviewRestore factory settingsForm factor: E27LED power: 7W (Max.)Input: 100 - 240AC , 50/60 Hz 0.07A ( MAX )Luminous flux: 500LMWi-Fi: 802.11b/g/n, 2.4 GHz ONLYGeneral useAfter you screw the Smart Light Bulb into your existing light fitting, use your wall light switch to turn on and off the Smart Light Bulb for 5 times and then the light color of the Smart Light Bulb will turn red. When the light color turns cold white again, it indicates that you have restored the device to factory settings.E27 base Specifications
Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. 

Navigation menu