TORRAS TECHNOLOGY CDRZ32 Wireless Charger User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3794676
Application ID	XUm8JOLiVG4OfSwrWi/Zlw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.93kB (286659 bits)
Date Submitted	2018-03-25 00:00:00
Date Available	2018-03-25 00:00:00
Creation Date	2018-03-22 15:22:19
Producing Software	3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Document Lastmod	2018-03-22 08:30:29
Document Title	TSPI0181A 图拉斯 C2无线充电器 说明书
Document Creator	Adobe Illustrator CC 22.0 (Windows)

感谢您购买及使用本产品!
产品概况
使用说明
为了给您带来更好的使用体验，阅读本说明书的同时
也请参阅您的手机或电子产品说明书。
充电感应距离：手机内部感应线圈与无线充电器内部感应
线圈的距离为(4-6)mm，使用时手机请避免带较厚的手机壳。
1. 接通电源，蓝绿灯圈交替闪烁后绿色灯圈常亮，进入待机
手机内部磁感应线圈
CDRZ32 使用说明书
手机
无线充电器内部磁感应线圈
无线充电器
产 品 型 号
CDRZ32
尺
寸
直径≈99mm, 厚度≈13mm
输
入
5V
功
率
充电感应距离
净
重
适 用 机 型
产 品 清 单
4. 请勿在严重高温、潮湿或腐蚀性情况下使用无线充电器，
注：被充电设备必须符合Qi标准才能使用。
近，避免造成磁性失效。
充电器之间的距离至少为20cm，以避免对医疗设备造成
2A, 12V
产品中有害物质的名称及含量
潜在干扰。
8. 请保持充电器远离水或其它液体。
9. 如需清洁充电器，请确保电源断开。
1.5A
10. 请勿给儿童当玩具使用。
15W(Max)
11. 使用环境温度保持在0-45℃。
部件名称
镉 六价硌 多溴联苯 多溴二苯醚
铅
汞
(PBDE)
(Pb) (Hg) (Cd) (Cr(Vl)) (PBB)
金属件
塑胶件
X：表示该有害物质至少在该部件的某一均质材料中的含量
超出GB/T 26572规定的限量要求。标记“X”的部件，皆因全球
技术发展水平限制而无法实现有害物质的替代。
*印刷电路板及组件包括印刷板及其零部件，电容和连接器等。
说明书×1
In order to bring you a better experience, read this manual
and also please refer to your mobile phone or electronic
product manual.
Product overview
Instructions
Charging induction distance: the distance between the inner
induction coil of the handset and the inner inductance coil of
the wireless charger is (4-6) mm, and the mobile phone avoids
using a thicker mobile phone shell when using.
Internal magnetic induction coil of cellphone
Product Specifications:
Product name
Wireless charger
Model
CDRZ32
Phone
Internal magnetic induction
coil of Wireless charger
Diameter≈99mm, Thickness≈13mm
Input
5V
Power
15W(Max)
2A, 9V
2A, 12V
1.5A
Charging induction
distance
(4~6)mm
Net weight
≈138g
Applicable model
The Qi standard of iPhone, Samsung,
LG, Moto and other whole series will
support the wireless charging models
(4 - 6)mm
green light will flash alternately; then green light will
stay on and the charger is standby;
2. Put mobile phone in the induction zone; blue light will
stay on to indicate the phone is charging;
中国制造
user is encouraged to try to correct the interference by
Warranty Card
-- Increase the separation between the equipment and
Phone Number:
9. If you need to clean the charger,make sure it do not
connect to the power.
11. The ambient temperature shall be kept between 0-45℃.
receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician
for help
This device complies with part 15 of the FCC rules. Operation
Changes or modifications not expressly approved by the
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
1. Do not press hard or crash the product.
reasonable protection against harmful interference in a
2. Do not disassemble or reassemble.
residential installation. This equipment generates uses
3. Do not put the product near the fire or into the fire, water.
and can radiate radio frequency energy and, if not installed
4. Do not use wireless charger in severe high temperature
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
5. Do not place too close to a magnetic card(id and bank
there is no guarantee that interference will not occur in a
card)with a magnetic strip or chip to avoid the failure
particular installation. If this equipment does cause harmful
of the magnetism.
interference to radio or television reception, which can
6. Do not put the iron or iron shell on the charger.
深圳市图拉斯科技有限公司版权所有并保留一切权利
-- Reorient or relocate the receiving antenna.
8. Please keep the charger away from water or other liquids.
be determined by turning the equipment off and on, the
网址 : www.torras.hk
生产商：深圳市倍力奇科技有限公司
生产商地址：深圳市龙岗区布吉街道甘李工业园甘李六
路 12 号中海信创新产业城 12 栋
to the medical device.
authority to operate the equipment.
Indicator light
国内热线 : 400-800-1368
商务合作 : sales@torras.hk
charger at least 20cm to avoid potential interference
10. Please do not use the toys for children.
and humidity or corrosion to avoid leakage.
蓝禾集团有限公司
深圳市图拉斯科技有限公司
地址 : 深圳市龙华区民治大道展滔科技大厦 C 座 17 楼
Customer Name:
party responsible for compliance could void the user's
Type-C input port
注：
one or more of the following measures:
the charger will turn on charging protection.
Notes
备
device (pacemakers, implants, etc.) and the wireless
than mobile phones, blue light will keep flashing and
Note: the charging equipment must meet the Qi standard
to be used.
Sensor zone
Wireless charger×1、Type-C data
line×1、Instruction book×1
The parameters above are derived from the laboratory
of TORRAS, The actual parameter would be different
because of products or other factors. The image shown
here is indicative only.
1. When the wireless charger is power-on, blue light and
3. When the wireless charger senses metal objects other
Wireless charger
Size
在中华人民共和国境内销售的电子信息产品必须标识此标志。
圆圈内的数字表示正常使用状态下产品的环保使用期限。
7. Please keep the distance between the implanted medical
址：
其他
本表格依据SJ/T 11364的规定编制。某些型号的产品可能不
GB/T 26572规定的限量要求以下。
执行标准：GB 4943.1-2011
地
硅胶
≈138g
Type-C输入口
购买日期：
导线
O：表示该有害物质在该部件所有均质材料中的含量均在
无线充电器×1、Type-C数据线×1、
联系电话：
产品名称：
印刷电路
板及组件*
包含表中的部分部件。
Moto等全系列支持无线充电机型
客户姓名：
有害物质
(4~6)mm
兼容Qi标准的苹果、三星、LG、
保修卡
为满足中国电子电气产品有害物质限制相关的法律法规和
其他要求，对本产品中有害物质，按部件分类，声明如下。
5. 请勿与带磁条或者芯片的磁卡(身份证、银行卡等)放置太
指示灯圈
Product list
避免损坏电路出现漏电现象。
(4 - 6)mm
无线充电感应区
Thank you for purchasing and using this product!
Please read this Operation Instruction carefully and keep
it properly before using this product.
3. 请勿将产品靠近火源或投入火中、水中。
7. 请保持植入医疗设备(心脏起搏器、植入性耳蜗等)与无线
使用产品前请仔细阅读本使用说明书，并请妥善保管。
CDRZ32 USER'S GUIDE
2. 请勿自行拆装分解或改造。
3. 感应到金属异物时，蓝色灯圈会不停的闪烁，并开启充电
6. 请勿将金属或带金属的手机壳放在充电器上。
产 品 名 称
2A, 9V
状态；
2. 将手机放在感应区内进入充电状态，蓝色灯圈常亮；
保护功能。
无线充电器
产品参数
注意事项
1. 请勿用力挤压或碰撞该产品。
Product Name:
Date of Purchase:
Address:
Notes:
is subject to the following two conditions (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
LANHE GROUP CO., LTD.
SHENZHEN TORRAS TECHNOLOGY CO., LTD.
Add: 17 FLOOR, BLOCK C, ZHANTAO TECHNOLOGY BUILDING,
MINZHI ROAD, LONGHUA DISTRICT, SHENZHEN
Domestic tel: 400-800-1368
Email: support@torras.hk
Web: www.torras.hk
© Shenzhen TORRAS Technology Co., Ltd. All Rights Reserved.
Factory : Shenzhen Powerqi Technology Co., Ltd.
Factory's Address :12th Building, Zhonghaixin Science &
Technology Park, Ganli 6th Rd, Ganli Industrial Park, Buji Street,
Longgang District, Shenzhen, China
Made in China

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Create Date                     : 2018:03:22 15:22:19+09:00
Creator                         : Adobe Illustrator CC 22.0 (Windows)
Title                           : TSPI0181A 图拉斯 C2无线充电器 说明书
Modify Date                     : 2018:03:22 08:30:29Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 1

EXIF Metadata provided by EXIF.tools