TP Link Technologies C9AV1 C9A FDD-LTE Smartphone User Manual 4

Download:
Mirror Download [FCC.gov]
Document ID	3887821
Application ID	X3qZVfOWfhMxQJNh3W52Ng==
Document Description	User Manual_4
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	216.64kB (2707990 bits)
Date Submitted	2018-06-14 00:00:00
Date Available	2018-06-14 00:00:00
Creation Date	2018-05-18 14:14:01
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-06-07 19:35:35
Document Title	User Manual_4
Document Creator	Adobe InDesign CC 2017 (Windows)

17. 8 Display
Configure the display settings to personalize your phone. For example, you can change the wallpaper, font
size, and screen-off time. On the Home screen, tap
Settings -> Display, You can configure the following
settings:
• Adaptive brightness: Switch on Adaptive brightness and your phone will automatically adjust the screen
brightness according to the ambient brightness. Drag the slider under Adaptive brightness to adjust the
brightness. The screen brightness will stay constant regardless of the ambient brightness if you disable
automatic screen brightness. To adjust the screen brightness, you can also swipe down from the status bar:
Check to enable automatic screen brightness
Drag slider to adjust brightness manually
• Wallpaper: Tap Wallpaper -> Select new wallpaper, choose the desired wallpaper and follow the onscreen
instructions to set it as the Home screen or Lock screen wallpaper (or both). For another two ways to set
wallpaper, you can either go to
Themes ->
-> Wallpapers to set wallpaper, see Change the
wallpaper; or touch and hold the a blank area on the Home screen to access the Home screen editor, then
Wallpapers at the lower right corner to set wallpaper, see Set the Home screen wallpaper.
tap
• LED indicator: If Notification indicator is enabled, the LED indicator will blink green when you receive
notifications. If Charging indicator is enabled, the LED indicator will light in yellow when your phone is offscreen charging, and it turns to green when the charging is complete; once you unlock the screen, the LED
indicator will be off.
• Eye protection mode: Turn on the switch to decrease the blue light of the screen to reduce harm to the
retina. You can make a schedule by turning Scheduled on and set the specific time. You can drag the slider
to adjust the color temperature for a cooler or warmer screen color.
• Font size: Tap to set the font size.
• Automatically lock: Make the phone lock automatically after a certain time of inacticity.
• Auto-rotate screen: If this option is enabled, your screen’s orientation will switch automatically depending
on how you hold your phone when performing certain operations, such as browsing a web page or viewing
a picture.
17. 9 Apps
On the Home screen, tap
Settings -> Apps to enter Apps screen, you can:
• View installed apps: Tap Installed to view the apps you installed. Then tap an app and you can uninstall it (To
install an app, you can also touch and hold the app on Home screen, then drag it to Uninstall in the status
Chapter 17 . Settings
67
bar); force it stop (This function only works when the app is run in background); view storage, data usage
information and configure other more funtions.
• View installed apps: Tap All or swipe the screen left to view all the apps in your phone. Then tap an app and
you can disble it (Some pre-installed apps cannot be disabled); force it stop (This function only works when
the app is run in background); view storage, data usage information and configure other more funtions.
• More options for Apps: Tap -> Default apps settings to configure more default settings for assist & voice
input, Home app, Browser app and so on. Tap -> Reset app preferences to reset all preference for disabled
apps, disabled app notifications, default applications for actions, background data restrictions for apps and
any permission restrictions. After resetting app preferences, you will not lose any app data.
17. 10 Permissions
Your phone comes with a permission manager that you can use to restrict app permissions and protect your
Settings -> Permissions to configure the detailed permissions.
personal data. On the Home screen, tap
17. 11 Storage
Check whether there is enough space on your phone’s internal storage or microSD card before downloading
update packages or large files.
Settings -> Storage to view available storage information and how much storage space Apps/
Go to
Images/Videos/Audio/System/Other/Cached data occupy respectively.
Note:
Other includes shared files saved by apps, files downloaded from the Internet or Bluetooth, Andriod files and so on.
17. 12 Battery
On the Home screen, tap
Settings -> Battery, you can configure the following settings:
• Smart power saving: If this option is enabled, the location information service and app autostart function will
be restricted, notifications will not light the screen, and visual effects will be reduced.
• Ultra power saving: If this option is enabled, only a few apps such as Phone and SMS are allowed, then tap
on the top right corner to exit ultra power saving mode.
• Off-screen cleanup: Tap Off-screen cleanup and you can:
Tap to restore default settings
If this option is enabled, all the background apps will be
cleared up three minutes after the screen is off
If this option is disabled/enabled, this app will not be/be
cleared up three minutes after the screen is off (This function
only works when the app is running in background)
Chapter 17 . Settings
68
• Background power consumption apps: The power consuming apps running on the background will display
on the screen. Tap High power consumption reminder, you can:
Tap to restore default settings
If this option is enabled, a notification will be sent to you once high
power consumption behavior by any app listed below is detected
If this option is disabled/enabled, a notification will not be/be sent
to you once high power consumption behavior by this app listed
is detected
• Show battery percentage: Turn the switch on to enable the display of the battery percentage in status bar.
17. 13 Smart settings
On the Home screen, tap
Settings -> Smart settings, and you can configure the following functions:
• Button settings: Tap to select the Back button on the left/right of the Home button, then the Recent button
will be on the contrary side of the Home button.
• Float button: The Float button gives you access to a number of frequently-used options and features, such as
the Back button, Home button, and one-touch optimization. You can move the floating button around the
screen for easy one-hand use. For detailed instrutions, please see Float button.
• Screen-off gestures: Switch on to enable using gestures to start features and apps on an off-screen. Then you
may turn the switch(es) on this interface to enable the gestures for screen control/music control/wake apps.
• Taking screenshots by gestures: Switch on to enable sliding three fingers on the screen to take screenshots.
• Glove mode: Switch on to increase screen sensitivity so that it can be operated even when wearing gloves.
• Accessibility: Accessibility features make it easier for users with impaired vision or hearing to use their phone.
For detailed instrutions, please see Accessibility.
17. 14 Float button
The Float button gives you access to a number of frequently-used options and features, such as the Back
button, Home button, Recent apps button, taking a screenshot and locking screen. You can move the floating
button around the screen for easy one-hand use.
Settings -> Smart settings -> Float button and turn the switch on. Once enabled, the Float button
Go to
will be shown on all screens except the Lock screen and Notification Panel. Tap
to expand the Float
button menu.
Chapter 17 . Settings
69
Home
Recents
Screenshot
Back
Lock
From the menu, you can:
• Tap
to return to the Home screen.
• Tap
to display the list of recently used applications.
• Tap
to take a screenshot.
• Tap
to return to the previous screen.
• Tap
to lock the screen.
17. 15 Accessibility
Accessibility features make it easier for users with impaired vision or hearing to use their phone. On the Home
Settings -> Smart settings -> Accessibility, and you can configure the following functions:
screen, tap
TalkBack
TalkBack is an accessibility feature designed for visually and hearing impaired users. It provides audible prompts
and captions to help you operate your phone. When TalkBack is enabled, your phone will issue audible prompts
for all content that you tap, select, or enable. Please enable with caution.
• Enable or disable TalkBack
1 ) Tap TalkBack and turn the switch on, and then tap OK to enable TalkBack. The audible tutorial will be
started automatically when you enable TalkBack for the first time.
2 ) Tap
, and then turn on Explore by touch. Your phone will not issue audible prompts for the content
that you tap unless you turn on Explore by touch.
3 ) Disable TalkBack by tapping the switch until the the audible tutorial tells you “On-Switch, doule tap to
toggle”, then doule tap the switch and follow the audible prompts.
• Use TalkBack to control your phone
After you have enabled TalkBack, use gestures to:
1 ) Browse the screen: Use two fingers to swipe the screen (instead of one). Swipe up or down with two
fingers to scroll through menu lists. Swipe left or right to move between screens.
2 ) Select an item: Tap an item with one finger to select it (it will not open). The phone will read out the
content of the selected item.
3 ) Open an item: Double-tap any part of the screen using one finger to confirm your selection from the
previous step. For example, if you want to open Weather
, two steps are required: Tap the Weather
once using one finger, and then tap twice on any part of the screen.
• Configure the TalkBack settings
TalkBack settings can be customized to suit your individual needs.
Chapter 17 . Settings
70
1 ) On the TalkBack screen, tap
on the top right corner of the screen.
2 ) You can adjust the speech volume, text-to-speech settings, control gestures, and more.
Magnification gesture
Use magnification gestures to zoom in on a specific area (The keyboard and the navigation bar cannot be
magnified).
Tap Magnification gesture and turn on the switch.
• Zoom in: Tap the screen three times in quick succession to zoom in. Tap the screen three times again to
zoom back out. Magnification gestures will still be enabled when you tap the screen three times. Turn off the
magnification gestures switch to disable magnification gestures. While zoom in, you can:
1 ) Browse a magnified area: Swipe the screen using two or more fingers.
2 ) Adjust the zoom level: To zoom in, spread your fingers apart on the screen. To zoom out, pinch two or
more fingers together on the screen.
• Zoom in temporarily: Tap the screen three times in quick succession and hold your finger on the screen.
Keep your finger on the screen and swipe to browse a magnified area. Release your finger to zoom back out.
17. 16 Apps Cloner
1.
On the Home screen, tap
Settings -> App Cloner.
2.
Apps available for App Cloner will display on the screen. When App Cloner is enabled for an app, two app
icons will appear on the Home screen, running indepently of the original app. This allows you to log in to
two accounts at once. This feature is not supported on third-party Home screen.
3.
will show on the lower right corner of the cloned app icon
When you enable App Cloner for an app,
on the Home screen, differing from the original app icon.
17. 17 Screen lock, fingerprint & security
On the Home screen, tap
settings:
Settings -> Screen lock, fingerprint & security, you can configure the following
• Fingerprint management: Tap it and follow the onscreen instructions to add fingerprint(s). For more
information, see Configure your fingerprint.
• Press and hold your fingerprint to capture: Toggle the switch to enable/disable capturing when pressing and
holding your fingerprint.
• Screen lock: If you have added fingerprint(s) for your phone, then the screen lock will be the Pattern/PIN/
Password you have set before you add fingerprint(s) by default. If you haven’t added fingerprint(s), tap
Screen lock, then None means setting no screen lock for your phone, Swipe means you can swipe the
screen to unlock your phone, Pattern/PIN/Password means using the pattern/PIN/password to unlock yur
phone. Choose one of the five above as desired and follow the onscreen instructions to set your screen lock.
Note:
To remove the screen unlock password, tap Screen lock and verify your screen lock method, then tap None and
follow the onscreen instructions.
• Lock screen message: Tap it and enter your lock screen signature, then tap SAVE. Your lock screen signature
will be displayed on the lock screen.
• Palm rejection mode: Switch on to prevent misoperation of the mobile phone due to squeezing or sliding
in the pocket.
• Smart lock: Before using smart lock, set a screen lock. Keep your device unlock when it’s safe with you. Smart
Lock can do this by recognizing signals like when your device is in your pocket or near you home.
1 ) Tap Learn more to get more detailed information.
Chapter 17 . Settings
71
2 ) Tap On-body detection and turn the switch on to keep your device unlocked while it’s on you (On-boby
detection can’t distinguish between you and someone else. If someone takes your device while it’s unlocked, they
might be able to access it. Please enable this function with caution).
3 ) Tap Trusted places to add location where device should be unlocked.
4 ) Tap Trusted devices to add device to keep this device unlocked when connected; tap Trusted vioce
to set voice recognition.
• App lock: App lock allows you to set a protection way for your important apps. Once you restart your phone
or unlock the phone screen, you will be asked to enter your app lock method when initially opening the
apps. App lock enhances the protection of your private information and prevents unauthorized access to
important apps on your device. When you access app Lock for the first time, follow the onscreen instructions
to set Pattern/PIN/Password as your app lock method.
1 ) Turn on the switch next to the apps that you want to encrypt. You will need to enter the Pattern/PIN/
Password you have set each time you open an encrypted app.
to
2 ) Tap App Lock and verify your app lock method to enter App lock screen, then you can: tap
change password or enable using fingerprint to unlock encrypted app(s); switch off to disable app lock.
• Set up SIM card lock: Enable the SIM card lock to prevent others from using your SIM card. You will need to
enter your SIM card PIN each time you turn on your phone or insert your SIM card into another phone.
Note:
Make sure you have received a SIM PIN from your carrier before enabling the SIM lock. If you have forgotten your SIM PIN,
call your carrier.
• Make passwords visible: Switch on to enable viewing the passwords you enter when setting App lock or SIM
card lock.
• Unknown sources: Switch on to enable installation of apps from unknown sources.
• More security settings: Tap it and follow the onscreen instructions to cofigure more security settings.
17. 18 Location
Enable location-based services to ensure that map, navigation, and weather applications can access your
location information.
1.
Go to
Settings -> Location, turn on the switch to enable the location services. You can also swipe
Location to
down from the status bar to open the Quick Settings Panel, and then touch and hold
enter Location setting screen and turn on the switch.
2.
Tap Mode and you can choose from three different modes:
• High accuracy: Use GPS, WLAN, Bluetooth, or cellular networks to determine location. Select this option
for highly accurate positioning.
• Battery saving: Use WLAN, Bluetooth, or cellular networks to determine location. Select this option for
reduced power consumption and longer standby times.
• Device only: Use GPS to determine location. Select this option to reduce mobile data usage.
17. 19 Google
On the Home screen, tap
Chapter 17 . Settings
Settings -> Google to check the details about Google.
72
17. 20 Accounts
When you use your phone for the first time, you can set up a connection with your existing account or create
a new account.
Add an account
1.
Go to
settings -> Accounts.
2.
Tap
3.
Select an account type, and then follow the onscreen instructions to enter your account information. Once
you have added an account, some apps will automatically log in this account next time you open the
apps. For example, if you have add a Google account, then apps like Calendar, Chrome will automatically
log in this account and vice versa.
Add account.
Delete an account
1.
Go to
settings -> Accounts and the account you have added will display on the screen.
2.
Tap the account that you want to delete, and then tap -> Remove account to delete it.
Synchronize accounts
Enable the sync feature to keep all of your phone’s data up-to-date and prevent data loss. You can sync emails,
contacts, and other data from your old phone or computer. The type of data that can be synced depends on
the account type. Some applications may not support syncing for all data types.
1.
Go to
2.
Tap and check the Auto-sync data box to turn it on. Then any changes you make to your accounts on
the web will be automatically copied to your phone. Some accounts may also automatically copy any
changes you make on the phone to the web. A Google account works this way.
settings -> Accounts.
Note:
settings -> Accounts -> and uncheck the Auto-sync data box.
1.
To disable auto-sync feature, go to
2.
settings -> Accounts -> , uncheck the AutoIf you only want to sync the data of some account(s), go to
sync data box and tap OK. Tap the account of which the data you want to sync, then tap Sync now.
17. 21 Language & input
Go to
Settings -> Languages & input to manage your phone’s language and input settings.
Change the system language
1.
To change the system language, tap Languages -> Add a language and select the language you need.
2.
Tap the language or touch and hold the language and drag it to the top of the list.
Keyboard & input methods
• Virtual keyboard: Tap to select the keyboards you need and turn the switch next to the keyboard on.
• Physical keyboard: Tap and switch on Show virtual keyboard to enable keeping the virtual board on screen
when your phone is connected to a physical keyboard. Tap Physical keyboard -> Keyboard shortcuts
helper to view the available shortcuts in your phone.
Advanced help
• Spell checker: Switch on to enable spell checker.
• Text-to-speech output: Tap to configure the text-to-speech settings
• Pointer speed (Mouse/trackpad): Drag the slider to adjust the pointer speed of your muse or trackpad.
Chapter 17 . Settings
73
17. 22 Backup & reset
Backups help ensure that you never lose your data. You can back up app data, WLAN passwords and other
settings to Google servers. Restore your phone to its factory settings if it crashes or is slow to respond.
Go to
Settings -> Backup and reset, and you can:
Backup and restore
• Back up my data: Switch on to enable your device and app data regularly being saved to the Google server,
including WLAN passwords, contacts, emails, photos, etc.
• Backup account: Tap to select the accounts you want to back up or add a new account.
• Automatic restore: Switch on to enable your phone restoring backup settings and data when reinstalling an
app.
Network settings reset
Tap Network settings reset -> RESET SETTINGS to reset all network settings, including WLAN, cellular data
and Bluetooth. This action cannot be undone, please enable with caution.
Factory data reset
Back up important data on your phone before restoring factory settings. Restoring factory settings will erase
all personal data from your phone’s internal storage, including your Google account, system and app data and
settings, download apps, music, photos and other user data.
Tap Factory data reset -> FACTORY DATA RESET to restore your phone to factory settings. Your phone will
restart automatically when the process is complete. This action cannot be undone, please enable with caution.
17. 23 Date & time
Go to
Settings -> Date & time to configure the settings, you can set the following options:
• Automatic date & time: Switch on to use network-provided time. You can also switch it off to manually adjust
the date/time by tapping Set date/Set time on this interface.
• Automatic time zone: Switch on to use the network-provided time zone. You can also switch it off to manually
adjust the time zone by tapping Select time zone on this interface.
• Use 24-hour format: Toggle the switch to enable/disable using 24-hour format.
• Week starts on: Tap to choose the day when a week starts on as desired.
17. 24 System update
Over-the-Air updates (OTA updates)
1.
Go to
Settings -> System update. Your phone will automatically check for updates.
2.
If it turns out to be the latest version for your system, you have no need to update; if a new system version
displays on the screen, follow the onscreen instructions to update your system.
Local updates
1.
Go to http://www.neffos.com/en/support and find your phone model, then download the updates
package under Firmware to your phone. You can also go to your nearest Neffos service center to download
the updates package to your phone (It is recommended to use OTA updates and sometimes the updates
package will not be placed on the website).
Chapter 17 . Settings
74
2.
Go to
Settings -> System update -> -> Local updates, tap the file and then tap OK to confirm
update. During the update process, please do not turn off or restart the phone manually. After updating,
you phone will restart automatically.
Check version number
Go to
Settings -> System update -> -> Current to check your phone’s version number.
Configure more settings
Go to
Settings -> System update -> -> Settings and you can:
• Auto download update packages: Switch on to enable your phone to download update packages over
WLAN automatically.
• Download over mobile network: Switch on to enable your phone carrying out downloads over a mobile
network automatically when disconnected from WLAN.
• Update overnight: Switch on to enable the update being carried out automatically at 2:00-5:00 a.m. when the
battery level is more than 30%.
Note:
1.
Using unauthorized third-party software to update your phone may render your phone unusable or put your personal
information at risk. Always update through your phone’s online update feature or send your phone to a nearby
authorized Neffos service center for assistance.
2.
Your personal data will not be erased during a system update unless you have installed an incompatible app. It is
better to back up important data before updating your phone.
3.
When updating, ensure that your phone has at least 30% battery power remaining.
4.
After updating, you may find that some third-party applications are incompatible with your system, such as Internet
banking applications and games. This is because it takes a while for third-party application developers to release
updates for new Android releases. Please wait until a new version of the application is released.
5.
You can also check your phone’s version number in
Build number.
6.
If there is any issuse with your current system version, your phone will download an intact new version in your phone
automatically. After downloading, there will be a notification reminding you to update your system. Then follow the
onscreen instructions to update.
Settings -> About phone -> Software information ->
17. 25 About phone
View your phone’s specifications in a few simple steps. You can view information about your phone’s status,
model, baseband version and so on.
Go to
Settings -> About phone. Swipe up or down on the screen to view information about the IMEI
information, SIM status, model number, build number and more.
Chapter 17 . Settings
75
Appendix A: Specifications
Specifications
Size and Weight
Height: 146.5 mm
Width: 70.9 mm
Depth: 8.3 mm
Weight: 143 g
Color
Cloudy Grey/Moonlight Silver
Display
5.45 inches, HD+ (1440 x 720)
295 PPI
IPS
CPU
Memory
External Memory
MTK6739WW
4*Cortex-A53 1.5GHz
IMG8XE1PPC 570MHz
ROM: 16 GB
RAM: 2 GB
Micro SD Card (up to 128 GB)
Camera
Front 5 Mega-pixel
Rear 13 Mega-pixel, Auto Focus
Network
FDD-LTE Cat4
(up to 150 Mbps DL/50 Mbps UL)
HSPA+
(up to 21 Mbps DL/11.5 Mbps UL)
DC-HSPA+
(up to 42 Mbps DL/11.5 Mbps UL)
Sensors
Fingerprint Sensor, Compass, Accelerometer, Ambient Light Sensor, Proximity
Sensor
Audio formats:
Audio
Video
Connectivity
MP3, AAC, WAV, M4A, OGG, OGA, AMR, AWB, FLAC, MID, MIDI, XMF, IMY, RTTTL, RTX, OTA,
MP4, 3GP
Dual MIC
Video formats:
M4V, MP4, MOV, AVI, 3GP, 3G2, MKV, WEBM
Decoder: 1080p/30fps
Encoder: 1080p/30fps
Wi-Fi 802.11b/g/n, 2.4 GHz,
Bluetooth: 4.2
Dual Nano SIM Cards (Dual SIM Dual Standby)
SIM1 Support 2G/3G/4G
SIM2 Support 2G/3G/4G
76
Specifications
Network Standard
Location Technology
Cloud Service
Operation System
Battery
In the box
FDD-LTE/WCDMA/GSM
TP706C:
FDD-LTE: band 2/4/7
WCDMA: band 2/4/5
GSM: band 2/5
GPS/A-GPS, GLONASS
Supported
Android 7.1.1
3020 mAh (Typical)
Neffos C9A
Charger
USB Cable
Quick Start Guide, Warranty Card, Safety Notice
77
Appendix B: Technical Support
Contact our technical support if you have any questions related to this product.
Countries/Regions
Support
Global
Website: www.neffos.com
Tel: +86 755 26504400
E-mail: info@neffos.com
support@neffos.com
Address: South Building, No.5 Keyuan Road, Central Zone, Science &
Technology Park, Nanshan, Shenzhen, P. R. China Postcode: 518057
Americas
Middle East& Africa
Brazil
E-mail: suporte.br@neffos.com
Tel: 4007-2172 (Capitais e Regiões metropolitanas)
0800-608-9799 (Demais localidades)
11 2222-1245 (SP) 21 3180-0092 (RJ)
Service Time: segunda a sexta-feira das 09:00 as 18:00 Sábado das 09:00
as 15:00
Mexico
Website: www.neffos.com.mx
Tel: +52 55 91388104
E-mail: sales.mx@tp-link.com
support.mx@tp-link.com
Address: Goldsmith 53, Piso 1, Col. Polanco Chapultepec Del. Miguel
Hidalgo, México , Distrito Federal C.P. 11560.
Columbia
Website: http://www.neffos.com/co/
Tel: +57 (1)8773545
E-mail: support.co@tp-link.com
Address: Autop. Medellín Km 1.5 Vía Parque la Florida, Bod. 45 Parque
Ind. Terrapuerto, Cota, Cund.
Peru
Website: www.neffos.com.pe
Tel: +51 1 2402960 Anexo 2967
E-mail: Alejandro.torres@tp-link.com
Address: Avenida Republica de Panamá 3545 Oficina 802. San Isidro.
Lima Perú
Venezuela
Website: www.neffos.com
Tel: +86 755 26504400
E-mail: info@neffos.com
support@neffos.com
Address: South Building, No.5 Keyuan Road, Central Zone, Science &
Technology Park, Nanshan, Shenzhen, P. R. China Postcode: 518057
United Arab
Emirates
Website: www.neffos.com
Tel: +86 755 26504400
E-mail: info@neffos.com
support@neffos.com
Address: South Building, No.5 Keyuan Road, Central Zone, Science &
Technology Park, Nanshan, Shenzhen, P. R. China Postcode: 518057
78
Countries/Regions
Support
Germany
Website: www.neffos.de
Tel: +49 1806-633367 (Mon-Fr 8: 00-17: 00; 20ct/Anruf aus dem dt.
Festnetz)
E-mail: support.de@neffos.com
sales.de@neffos.com
Address: TP-LINK Deutschland GmbH, Robert-Bosch-Straße 9, 65719
Hofheim am Taunus
France
Support technique: support.fr@neffos.com
Adresse: 16-18 avenue Morane Saulnier, 78140 Vélizy-Villacoublay,
France.
Téléphone: +33 (0)5 63 21 27 41
Commercial: sales.fr@neffos.com
Questions d’ordres générales: info.fr@neffos.com
Service après-vente: rma.fr@neffos.com
Greece
Website: www.neffos.gr
Tel: 210-5197500
E-mail: support.gr@neffos.com
Service time: 09.00 - 17.00
Address: Λ. Κηφισού38 – 38A, 104-42
Portugal
Tel: +351 219 667 944/5/6
E-mail: suporte.pt@neffos.com
De Segunda a Sexta (excepto feriados), das 09h00 às 13h00 e das
14h00 às 18h00.
Italy
Website: www.neffos.it
Via Gobetti 2/A, 20063 Cernusco sul Naviglio (MI)
Per informazioni per il tuo business:
E-mail: sales.it@neffos.com
Tel: +39 02 92392211
Russia
Телефон: 8 (495) 228 55 66
Телефон тех. поддержки: 8 (495) 228-55-60 (для Москвы и
Московской области)
Телефон тех. поддержки: 8 (800) 250-55-60 (бесплатно из любого
региона РФ)
E-mail: Info.ru@neffos.com
E-mail технической поддержки: support.ru@neffos.com
E-mail отдела сервиса: service.ru@neffos.com
Адрес: г. Москва, ул. Электрозаводская, 27 стр. 7 офис 501
Spain
Website: www.neffos.es
Tel: 902 060 365
E-mail: info.es@neffos.com
soporte.es@neffos.com
Address: Calle Quintanavides 17, 3ª planta Puerta E, 28050 Madrid
Ukrain
Tel: 0 (800) 505-508
E-mail: support.ua@neffos.com
Service Time:10:00AM to 10:00PM, working day, Monday to Friday.
Europe
79
Countries/Regions
Europe
Support
Bulgaria
Website: http://www.neffos.bg
Tel: +40 311 070 963
+40 311 011 290
E-mail: support.ro@neffos.com
service.ro@neffos.com
sales.ro@neffos.com
info.ro@neffos.com
Romania
Website: http://www.neffos.ro
Tel: +40 311 070 963
+40 311 011 290
E-mail: support.ro@neffos.com
sales.ro@neffos.com
info.ro@neffos.com
service.ro@neffos.com
Czech
Website: http://cz.neffos.com/
E-mail: sales.cz@neffos.com
Tel: CZ +420 212 812 625 / SK +421 233 056 981
Address: Kutvirtova 339/5, Praha 5, 150 00
Poland
ul. Ożarowska 40/42, Duchnice 05-850, Poland
neffos.pl@tp-link.com
Wsparcie techniczne:
support.pl@neffos.com
Telefon:
+48 (0) 801 002 228
+48 22 360 63 90 (dla połączeń z telefonów komórkowych)
Opłata: Zgodnie z taryfą operatora.
Godziny pracy: Od poniedziałku do piątku w godzinach 9:00-17:00.
Turkey
Genpa Telekomünikasyon ve İletişim Hizmetleri San. Tic. A.Ş.
Adres: Etiler Mah. Nispetiye Cad. No:101 34337 Etiler Beşiktaş / İstanbul
TELEFON / FAKS: 0212 359 0 359 / 0212 287 27 27
support.tr@neffos.com
sales.tr@neffos.com
Ukraine
Украина, 04053, Киев, ул. Металлистов, 20, Офисний центр VEDA,
2-й этаж
www.neffos.com/uk-ua/
+38 (044) 590-51-13
sales.ua@tp-link.com
0 (800) 505-508 та (044) 590-51-14 Часы работы: ПН-ЧТ, с 10:00 до
22:00,
ПТ с 10:00 до 21:00, СБ, ВС – нерабочие дни. Стоимость звонков на
горячую линию согласно тарифов вашего оператора и бесплатно
со всех стационарных телефонов Украины.
support.ua@tp-link.com
+38 (044) 590-51-77
service.ua@tp-link.com
80
Countries/Regions
Support
India
Website: www.neffos.in
E-mail: marketing.in@neffos.com
Address: 401, peninsula heights, C.D. Barfiwala Road, Juhu lane. Andheri
(west) Mumbai 400058 - India.
Indonesia
Website: www.neffos.com
Tel: +86 755 26504400
E-mail: info@neffos.com
support@neffos.com
Address: South Building, No.5 Keyuan Road, Central Zone, Science &
Technology Park, Nanshan, Shenzhen, P. R. China Postcode: 518057
Malaysia
Website: www.neffos.com.my
E-mail: support.my@neffos.com
Tel: +603 2110 0862 (Mon - Sun, 10am - 10pm)
+603 2141 4358 (Mon - Sun, 10am - 10pm)
Address: UG-CB4, Plaza Low Yat, Off Jalan Bukit Bintang, 55100 Kuala
Lumpur.
Thailand
Website: www.neffos.com/th
Tel: 02-4400029 (ค่าบริการขึ้นอยู่กับเครือข่ายที่ใช้งาน)
E-mail:support.th@neffos.com
Service Time: 08:30 - 17:30 วันจันทร์-เสาร์.
Address: บริษัท ทีพี-ลิงค์ เอ็นเตอร์ไพรส์ (ประเทศไทย) จ�ำกัด (ส�ำนักงานใหญ่) 77/159 อาคาร
สินสาธรสาวเวอร์ ชั้น 36 ถนนกรุงธนบุรี แขวงคลองต้นไทร เขตคลองสาน กรุงเทพฯ 10600
Vietnam
Website: www.neffos.vn
E-mail: press.vn@neffos.com
support.vn@neffos.com
sales.vn@neffos.com/ sales.vn@tp-link.com
Tel: +84 8 66894777 (Gi ờ hành chính)
Address: 12A-15 Tòa nhà Vincom, 45A Lý T ự Trọng, Quận 1, TP. Hồ Chí
Minh, Việt Nam
Bangladesh
Website: www.neffos.com
Tel: +86 755 26504400
E-mail: info@neffos.com
support@neffos.com
Address: South Building, No.5 Keyuan Road, Central Zone, Science &
Technology Park, Nanshan, Shenzhen, P. R. China Postcode: 518057
Singapore
Website: www.neffos.com
Tel: +86 755 26504400
E-mail: info@neffos.com
support@neffos.com
Address: South Building, No.5 Keyuan Road, Central Zone, Science &
Technology Park, Nanshan, Shenzhen, P. R. China Postcode: 518057
Asia-pacific
81
Appendix C: Explanation of the symbols on
the product label
The meaning of symbols on the product label is explained below.
Symbol
Explanation
RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment
(WEEE). This means that this product must be handled pursuant to European directive 2012/19/
EU in order to be recycled or dismantled to minimize its impact on the environment. User has the
choice to give his product to a competent recycling organization or to the retailer when he buys
a new electrical or electronic equipment.
To prevent possible hearing damage, do not listen at hign volume levels for long periods.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice.
is a registered trademark of TP-Link Technologies
Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative
such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.
Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
Google, Android, Google Play, YouTube and other marks are trademarks of Google LLC.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, LLC. And any use of
such marks by TP-Link Technologies Co., Ltd. is under license.
http://www.neffos.com
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам
нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
Personal information and data security
The use of some functions or third-party applications on your device could result in your personal information
and data being lost or becoming accessible to others. Several measures are recommended to help you protect
personal and confidential information.
• Place your device in a safe area to prevent it from unauthorized use.
• Set your device screen to lock and create a password or unlock pattern to open it.
• Periodically back up personal information kept on your USIM card, memory card, or stored in your device
memory. If you change to a different device, be sure to move or delete any personal information on your
old device.
• If you are worried about viruses when you receive messages or emails from a stranger, you can delete them
without opening them.
• If you use your device to browse the Internet, avoid websites that might pose a security risk to avoid theft of
your personal information.
• If you use services such as Wi-Fi tether or Bluetooth, set passwords for these services to prevent unauthorized
access. When these services are not in use, turn them off.
• Install or upgrade device security software and regularly scan for viruses.
• Be sure to obtain third-party applications from a legitimate source. Downloaded third-party applications
should be scanned for viruses.
• Install security software or patches released by Neffos or third-party application providers.
• Some applications require and transmit location information. As a result, a third-party may be able to share
your location information.
• Your device may provide detection and diagnostic information to third-party application providers. Third
party vendors use this information to improve their products and services.
• If you have concerns about the security of your personal information and data, please contact support@
neffos.com.
Legal notice
Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
Trademarks and permissions
is a registered trademark of TP-Link Technologies Co., Ltd.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, LLC. and any use of
such marks by TP-Link Technologies Co., Ltd. is under license.
Other trademarks, product, service and company names mentioned may be the property of their respective
owners.
Third-Party software statement
Neffos does not own the intellectual property of the third-party software and applications that are delivered
with this product. Therefore, Neffos will not provide any warranty of any kind for third party software and
applications. Neither will Neffos provide support to customers who use third-party software and applications,
nor be responsible or liable for the functions or performance of third-party software and applications.
Third-party software and applications services may be interrupted or terminated at any time, and Neffos
does not guarantee the availability of any content or service. Third-party service providers provide content
and services through network or transmission tools outside of the control of Neffos. To the greatest extent
permitted by applicable law, it is explicitly stated that Neffos shall not compensate or be liable for services
provided by third-party service providers, or the interruption or termination of third-party contents or services.
Neffos shall not be responsible for the legality, quality, or any other aspects of any software installed on this
product, or for any uploaded or downloaded third-party works in any form, including but not limited to texts,
images, videos, or software etc. Customers shall bear the risk for any and all effects, including incompatibility
between the software and this product, which result from installing software or uploading or downloading
the third-party works.
This product is based on the open-source Android platform. Neffos has made necessary changes to the
platform.
Therefore, this product may not support all the functions that are supported by the standard Android platform
or may be incompatible with third-party software. Neffos does not provide any warranty or representation in
connect with any such compatibility and expressly excludes all liability in connection with such matters.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO
WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE MADE IN RELATION TO
THE ACCURACY, RELIABILITY OR CONTENTS OF THIS MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL NEFFOS BE LIABLE FOR
ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF PROFITS, BUSINESS,
REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS REGARDLESS OF WHETHER SUCH LOSSES
ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO
THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF NEFFOS ARISING FROM THE USE OF THE
PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE
PURCHASE OF THIS PRODUCT.
Privacy policy
To better understand how we protect your personal information, please see the privacy policy at www.neffos.
com.
Safety information
This section contains important information about the operation of your device. It also contains information
about how to use the device safely. Read this information carefully before using your device.
Electronic device
Do not use your device if using the device is prohibited. Do not use the device if doing so causes danger or
interference with other electronic devices.
Interference with medical equipment
• Follow rules and regulations set forth by hospitals and health care facilities. Do not use your device where
prohibited.
• Some wireless devices may affect the performance of hearing aids or pacemakers. Consult your service
provider for more information.
• Avoid using your device within a 15 cm range of a pacemaker if possible, as your device can interfere with
the pacemaker. To minimize possible interference with a pacemaker, use your device only on the side of
your body that is opposite the pacemaker.
• If you use medical equipment, contact the equipment manufacturer before using your device to determine
whether or not the equipment will be affected by radio frequencies emitted by the device.
• Do not use your device near devices or apparatuses that emit radio frequencies, such as sound systems or
radio towers Radio frequencies may cause your device to malfunction.
• Do not use your device near devices or apparatuses that emit radio frequencies, such as sound systems or
radio towers. Radio frequencies may cause your device to malfunction.
• Electronic devices in your car may malfunction, due to radio interference from your device. Contact the
manufacturer for more information.
Protecting your hearing when using a headset
•
To prevent possible hearing damage, do not listen at high volume levels for long periods.
• Using a headset at high volumes may damage your hearing. To reduce this risk, lower the headset volume
to a safe and comfortable level.
• Exposure to high volumes while driving may cause distraction and increase your risk of an accident.
• Do not use a headset while driving or riding. Doing so may distract your attention and cause an accident, or
may be illegal depending on your region.
Areas with flammables and explosives
• Turn off your device in potentially explosive environments instead of removing the battery. Always comply
with regulations, instructions and signs in potentially explosive environments.
• Do not use your device at refueling points (petrol stations), near fuels or chemicals, or in blasting areas.
• Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the
device, its parts, or accessories.
Traffic security
• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your
wireless device while driving.
• Concentrate on driving. Your first responsibility is to drive safely.
• Do not hold the device while driving. Use hands-free accessories.
• When you must make or answer a call, pull of the road safely and park the vehicle first.
• RF signals may affect the electronic systems of motor vehicles. For more information, consult the vehicle
manufacturer.
• Do not place the device over the air bag or in the air bag deployment area in a motor vehicle. Doing so may
hurt you because of the strong force when the air bag inflates.
• On an aircraft, using electronic devices can interfere with the aircraft’s electronic navigational instruments.
Make sure the device is turned off during takeoff and landing. After takeoff, you can use the device in flight
mode if allowed by aircraft personnel.
Operating environment
• Do not expose the device to heavy smoke or fumes. Doing so may damage the outside of the device or
cause it to malfunction.
• Do not use or store your device in areas with high concentrations of dust or airborne materials. Dust or
foreign materials can cause your device to malfunction and may result in fire or electric shock.
• Do not use your device during thunderstorms to protect your device against any danger caused by lightning.
• Avoid exposing your device and battery to very cold or very hot temperatures. Extreme temperatures can
damage the device and reduce the charging capacity and life of your device and battery.
• Prevent the battery from coming into contact with metal objects, as this can create a connection between
the + and – terminals of your battery and lead to temporary or permanent battery damage.
• Do not expose your device to direct sunlight (such as on a car dashboard) for prolonged periods.
• To protect your device or accessories from fire or electrical shock hazards, avoid rain and moisture.
• Keep the device away from sources of heat and fire, such as a heater, microwave oven, stove, water heater,
radiator, or candle.
• Do not place sharp metal objects, such as pins, near the earpiece or speaker. The earpiece may attract these
objects and result in injury.
• Prevent the multipurpose jack and the small end of the charger from contact with conductive materials,
such as liquids, dust, metal powders, and pencil leads. Conductive materials may cause a short circuit or
corrosion of the terminals, which may result in an explosion or fire.
• Stop using your device or applications for a while if the device is overheated. If skin is exposed to an
overheated device for an extended period, low temperature burn symptoms, such as red spots and darker
pigmentation, may occur.
• Do not touch the device’s antenna. Otherwise, communication quality may be reduced.
• Do not allow children or pets to bite or suck the device or accessories. Doing so may result in damage or
explosion.
• Observe local laws and regulations, and respect the privacy and legal rights of others.
• Do not use your device’s camera flash directly in the eyes of people or pets. Otherwise temporary loss of
vision or damage to the eyes may occur.
• While using your device, leave some lights on in the room and do not hold the screen too close to your eyes.
Child’s safety
• Comply with all precautions with regard to child’s safety. Letting children play with the device or its
accessories may be dangerous. The device includes detachable parts that may present a choking hazard.
Keep away from children.
• The device and its accessories are not intended for use by children. Children should only use the device with
adult supervision.
Accessories
• Using an unapproved or incompatible power adapter, charger or battery may cause fire, explosion or other
hazards.
• Use manufacturer-approved batteries, chargers, accessories, and supplies
• Using generic batteries or chargers may shorten the life of your device or cause the device to malfunction.
They may also cause a fire or cause the battery to explode.
• TP-LINK cannot be responsible for the user’s safety when using accessories or supplies that are not approved
by TP-LINK.
Charger safety
•
•
•
•
•
•
•
•
•
•
•
•
For pluggable devices, the socket-outlet shall be installed near the devices and shall be easily accessible.
Unplug the charger from electrical outlets and the device when not in use.
Do not drop or cause an impact to the charger.
Do not use damaged power cords or plugs, or loose electrical sockets. Unsecured connections can cause
electric shock or fire.
Never use a damaged charger or battery.
Do not touch the device or the charger with wet hands. Doing so may lead to short circuits, malfunctions,
or electric shocks.
If your charger has been exposed to water, other liquids, or excessive moisture, take it to an authorized
service center for inspection.
Ensure that the charger meets the requirements of Clause 2.5 in IEC60950-1/EN60950-1 and has been tested
and approved according to national or local standards.
Connect the device only to products with the USB-IF logo or with USB-IF compliance program completion.
Do not bend or damage the power cord. Doing so may cause electric shock or fire.
Do not use your device while it is charging or touch your device with wet hands. Doing so may cause electric
shock.
Do not short-circuit the charger or the device. Doing so may cause electric shock or fire, or the battery may
malfunction or explode.
Battery safety
• Do not connect battery poles with conductors, such as keys, jewelry, or other metal materials. Doing so may
short-circuit the battery and cause injuries or burns.
• Keep the battery away from excessive heat and direct sunlight. Do not place it on or in heating devices, such
as microwave ovens, stoves, or radiators. Batteries may explode if overheated.
• Do not attempt to modify or remanufacture the battery, insert foreign objects into it, or immerse or expose
it to water or other liquids. Doing so may lead to fire, explosion, or other hazards.
• If the battery leaks, ensure that the electrolyte does not make direct contact with your skins or eyes. If the
electrolyte touches your skins or splashes into your eyes, immediately flush with clean water and consult a
doctor.
• In case of battery deformation, color change, or overheating while charging or storing, immediately stop
using the device and remove the battery. Continued use may lead to battery leakage, fire, or explosion.
• Do not put batteries in fire as they may explode. Damaged batteries may also explode.
• Dispose of used batteries in accordance with local regulations. Improper battery use may lead to fire,
explosion, or other hazards.
• Do not bite or suck the device or the battery. Doing so may damage the device or result in an explosion or
fire.
• Do not smash or pierce the battery, or expose it to high external pressure. Doing so may lead to a short
circuit or overheating.
• Do not drop the device or battery. If the device or battery is dropped, especially on a hard surface, and may
be damaged.
• If the device standby time shortens significantly, replace the battery.
• Do not handle a damaged or leaking Lithium Ion (Li-Ion) battery. For safe disposal of your Li-Ion battery,
contact your nearest authorized service center.
• If you notice strange smells or sounds coming from your device or the battery, or if you see smoke or liquids
leaking from the device or battery, stop using the device immediately and take it to a TP-LINK Service Centre.
Failure to do so may result in fire or explosion.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDING TO THE INSTRUCTIONS.
Cleaning and maintenance
• Keep the device and accessories dry. Do not attempt to dry it with an external heat source, such as a
microwave oven or hair dryer. Do not turn on your device if it is wet. If your device is already on, turn it off
and remove the battery immediately (if the device will not turn off or you cannot remove the battery, leave
it as-is). Then, dry the device with a towel and take it to a service canter.
• Do not expose your device or accessories to extreme heat or cold. These environments may interfere with
proper function and may lead to fire or explosion.
• Avoid collision, which may lead to device malfunctions, overheating, fire, or explosion.
• Before you clean or maintain the device, stop using it, stop all applications, and disconnect all cables
connected to it.
• Do not use any chemical detergent, powder, or other chemical agents (such as alcohol and benzene) to
clean the device or accessories. These substances may cause damage to parts or present a fire hazard. Use a
clean, soft, and dry cloth to clean the device and accessories.
• Do not store your device near magnetic fields for extended periods of time. Your device may malfunction or
the battery may discharge from exposure to magnetic fields. Magnetic stripe cards, including credit cards,
phone cards, passbooks, and boarding passes, may be damaged by magnetic fields.
• Do not use your device with the back cover removed. The battery may fall out of the device, which may
result in damage or malfunction.
• Do not dismantle or remanufacture the device and its accessories. This voids the warranty and releases
the manufacturer from liability for damage. In case of damage, contact an authorized service center for
assistance or repair.
• If the device screen is broken in a collision, immediately stop using the device. Do not touch or attempt to
remove the broken parts. Promptly contact an authorized service center.
• Do not store your device with metal objects, such as coins, keys, and necklaces. Your device may be scratched
or may malfunction. If the battery terminals come into contact with metal objects, this may cause a fire.
Emergency calls
The availability of emergency calls is subject to your cellular network quality, service provider policy, and local
laws and regulations. Never rely solely on your device for critical communications like medical emergencies.
Environmental protection
• The device and its accessories (if included), such as the power adapter, headset, and battery should not be
disposed of with household garbage.
• Disposal of the device and its accessories is subject to local regulations. Support proper collection and
recycling.
Disposal and recycling information
This marking on the product, accessories or literature indicates that the product and its electronic
accessories (e.g. charger, batteries, headset, USB cable) should not be disposed of with other household waste.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please
separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This
product and its electronic accessories should not be mixed with other commercial wastes for disposal.
This product is RoHS compliant.
EU regulatory conformance.
Body worn operation
The device complies with RF specifications when used near your ear or at a distance of 5mm from your body.
Ensure that the device accessories, such as a device case and device holster, are not composed of metal
components. Keep the device away from your body to meet the distance requirement.
Certification information (SAR)
This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and
receiver. As recommended by international guidelines, the device is designed not to exceed the limits for
exposure to radio waves. These guidelines were developed by the International Commission on Non-Ionizing
Radiation Protection (ICNIRP), an independent scientific organization, and include safety measures designed
to ensure the safety of all users, regardless of age and health.
The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy
absorbed by the body when using a device. The SAR value is determined at the highest certified power level
in laboratory conditions, but the actual SAR level during operation can be well below the value. This is because
the device is designed to use the minimum power required to reach the network.
The SAR limit adopted by Europe is 2.0 W/kg averaged over 10 grams of tissue, and the highest SAR value for
this device complies with this limit.
The highest SAR value reported for this device type when tested at the ear is 0.961 W/kg, and when properly
worn on the body is 1.604 W/kg.
Declaration of conformity:
TP-Link hereby declares that the device is incompliance with the essential requirements and other relevant
provisions of directives 2014/53/EU and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.neffos.com/en/ce.
The following marking is included in the product:
This device may be operated in all member states of the EU. Observe national and local regulations where the
device is used.
This device may be restricted for use, depending on the local network.
Restrictions or Requirements in following countries:
Operations in the 5.15-5.25 GHz band are restricted to indoor usage only.
AT
EE
IS
NO
BE
EL
IT
PL
BG
ES
LI
PT
CH
FI
LT
RO
CY
FR
LU
SE
CZ
HR
LV
SI
DE
HU
MT
SK
DK
IE
NL
UK
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
 -Reorient or relocate the receiving antenna.
 -Increase the separation between the equipment and receiver.
 -Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
 -Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This C9A FDD-LTE Smartphone meets the government's requirements for exposure to
radio waves. The guidelines are based on standards that were developed by independent
scientific organizations through periodic and thorough evaluation of scientific studies. The
standards include a substantial safety margin designed to assure the safety of all persons
regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:
C9A FDD-LTE Smartphone (FCC ID: TE7C9AV1) has also been tested against this SAR limit.
The highest SAR value reported under this standard during product certification for use at the
ear is 0.367W/kg and when properly worn on the body is 1.206W/kg. the Hotspot SAR value is
1.206W/kg,the simultaneous transmission SAR value is 0.686W/kg on the head and 1.304W/ kg
on the body. This device was tested for typical body-worn operations with the back of the
handset kept 10mm from the body. To maintain compliance with FCC RF exposure
requirements, use accessories that maintain a 10mm separation distance between the user's body
and the back of the handset. The use of belt clips, holsters and similar accessories should not
contain metallic components in its assembly. The use of accessories that do not satisfy these
requirements may not comply with FCC RF exposure requirements, and should be avoided.
Body-worn Operation
This device was tested for typical body-worn operations with the handset kept 10mm from the
body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain
a 10mm separation distance between the user’s body and the handset. The use of belt clips,
holsters and similar accessories should not contain metallic components in its assembly. The use
of accessories that do not satisfy these requirements may not comply with FCC RF exposure
requirements, and should be avoided. The FCC has granted an Equipment Authorization for this
model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2018:05:18 14:14:01+08:00
Creator                         : Adobe InDesign CC 2017 (Windows)
Modify Date                     : 2018:06:07 19:35:35+08:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2018:06:07 19:35:35+08:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Format                          : application/pdf
Document ID                     : uuid:e9994bc9-7dd6-44f9-a6db-8057556b02dd
Instance ID                     : uuid:bebc81f3-8c56-4d64-9a1a-ce927896387d
Producer                        : Adobe PDF Library 15.0
Page Count                      : 26

EXIF Metadata provided by EXIF.tools