TP Link Technologies HS200 Smart Wi-Fi Light Switch User Manual HS200 UM 20160425
TP-Link Technologies Co., Ltd. Smart Wi-Fi Light Switch HS200 UM 20160425
HS200_UM_20160425
User’s Manual
HS200
1910011729 RE V 1.0.0
Smart Wi-Fi Light Switch
Copyright & Trademarks
Specications are subject to change without notice. is
a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other
brands and product names are trademarks or registered trademarks
of their respective holders.
No part of the specications may be reproduced in any form or
by any means or used to make any derivative such as translation,
transformation, or adaptation without permission from TP-LINK
TECHNOLOGIES CO., LTD.
Apple and App Store are trademarks of Apple Inc., registered in the
U.S. and other countries.
Android and the Google Play logo are trademarks of Google Inc.
© 2016 TP-LINK. All rights reserved.
www.tp-link.com
5 Introduction
7 Product Requirements
7 Smart Wi-Fi Light Switch Installation
10 Using Kasa with Smart Switch
10 Kasa Account
11 Customizing Smart Switches
13 Scheduling
14 Creating Scenes
15 Away Mode
17 Energy Monitoring
18 Maintaining the Smart Switches
18 Firmware Update
19 Resetting
21 Troubleshooting
21 Frequently Asked Questions
22 Usage Tips
23 Support
24 Specications
24 Limited Warranty
Contents
5www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Introduction
TP-LINK Smart Wi-Fi Light Switch is a standard,
single-pole, wall light switch that can be controlled via
your iOS or Android devices. Along with the TP-LINK
Kasa mobile app, you can follow an intuitive wiring
instructions provided to replace your standard in-
wall switch, connect the Smart Switch to your home
network, then control your lights and create custom
lighting automations from anywhere, at anytime with an
Internet connection.
The Smart Switch is compatible with incandescent,
LED, Halogen, and compact uorescent light
bulbs. The switch also includes a white backlight
LED indicator to easily locate the switch at night.
6www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Blinking Amber and Green: App-
Cong mode initiated.
Green: Successfully connected to
the Wi-Fi network.
Blinking Amber: Resetting or during
rmware update.
Red: No Wi-Fi connection.
White: Lit up when the light is
switched OFF to show the Smart
Switch location in the dark.
Press to reboot the Smart Switch.
Press and hold (about 5 seconds)
until the Wi-Fi status LED blinks
amber and green alternately to
initiate App-Cong mode.
Press and hold (about 10 seconds)
until the Wi-Fi status LED blinks
green rapidly to factory reset the
Smart Switch.
RESET
RESTART
7www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Product Requirements
• In-wall installation with hardwired connections.
• A smartphone or tablet running iOS 8 and up or
Android 4.0 and up.
• A Wi-Fi connection (supports 802.11b/g/n
standard).
Smart Wi-Fi Light Switch Installation
Important Safety Information
Before installing, servicing, or removing the Smart
Switch, read and follow all safety precautions, including
the following:
• WARNING: RISK OF ELECTRIC SHOCK OR FIRE.
Turn OFF power supply at the circuit breaker or
fuse. Use a noncontact voltage tester to ensure the
power is off.
• The Smart Switch must be installed and used in
accordance with the National Electric Code (NEC)
or your local electrical code. If you are unfamiliar
with these codes and requirements, or are
uncomfortable performing the installation, consult
8www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
a qualied electrician.
• The Smart Switch is an indoor single-pole switch
that requires a neutral connection.
• Do not install the Smart Switch with wet hands or
when standing on wet or damp surfaces.
1 Download TP-LINK Kasa from App Store or Google
Play.
OR
Scan QR
code
2 Connect mobile device to your 2.4GHz Wi-Fi
network.
Note: The Smart Switch only supports 2.4GHz
networks.
9www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
3 Lauch Kasa and follow the wiring steps provided,
then connect the Smart Switch to your home
network.
Sketch 9:41 AM 100%
Before we start
Have you already wired up your
Smart Switch?
NOT YE T
Yes, I have
Log in to access your devices.
Welcome
home
Sketch 9:41 AM 100% Sketch 9:41 AM 100%
Start the con guration
Locate the reset button below the
switch on the left.
NEXT
Press and hold for 5 seconds until the
Wi-Fi light blinks amber and green.
RESE T
10www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Using Kasa with Smart Switch
Kasa Account
While you don’t have to have a Kasa account to use TP-
LINK Smart Home devices, signing up for an account
provides added functionality such as:
• Synchronization of settings and congurations to
all your mobile devices.
• Ability to control and congure the devices from
outside your home.
• Use of third-party services and products such as
Amazon Echo.
Devices can only be associated with one Kasa account.
To remove the association, turn off Remote Control in
the Kasa’s settings, or factory reset the device.
After creating your Kasa account, you will need to verify
the email associated with your account by clicking a
link in an email that Kasa sends you. Until you verify the
email, much of the above functionality will not work.
11www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Kasa Settings
Kasa Settings allows you to set your global preferences
such as:
• Remote Control to control your Smart Home
devices outside of your home. You need to sign in to
your Kasa account rst to turn on this function.
• Location and Time to set the location and time
of where the Smart Home devices are located so
that the Away Mode and Schedules can run on
time. You can set your home’s location using your
smart device’s GPS function, or manually enter the
latitude and longitude coordinates.
• Firmware Update to update your Smart Home
devices when there is an update available. Refer to
Firmware Update for instructions.
Customizing Smart Switches
You can personalize your Smart Switches with name,
icon, and other information from the switch’s details
screen.
12www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Time Zone
Device Time
DEVICE TIME
Device Settings
9:41 PM 100%
Device Name Front Porch Switch
San Francisco
Location
Sept 15, 2015 12:00 PM
Model
Firmware Version
DEVICE INFO
MAC Address
Hardware Version
1.0.0
1.0.0
00:01:02:03:04:05
HS220
Device Icon
Delete Device
Remote Control
DEVICE CONTROLS
Disabled
1. On the Devices screen, tap on the row of the Smart
Switch to go to its controls.
2. Tap the (Settings) icon at the top-right corner.
3. On the Device Settings screen, tap the icon for
each setting you want to personalize.
• Device Name – Create a unique name for your
Smart Switch.
• Device Icon – Choose one of the available icons
or use your own custom icon.
13www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Scheduling
You can set up your lights to illuminate around your
home at specic times on specic days of the week.
Schedules
9:41 PM 100%
No events yet!
Add Events by tapping the button on the
top right. Your saved event will be listed here.
SAVECANCEL
Create Event
9:41 PM 100%
At
Turn my Smart Plug
Repeating every
7 0 1
8 0 2
am
5 5 9
4 5 8
6 0 0 pm
:
SM T W T F S
ON
1. On the Devices screen, tap on the row of the Smart
Switch that you want to create a schedule for.
2. Tap (Schedule) to open the Schedule screen.
3. Tap to create an event.
4. Within the Create Event screen, set your preferred
state for the light bulb (ON or OFF), time, and day(s).
5. Tap Save.
14www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
You can create as many events as you like and edit
them at any time from the Schedule screen.
Creating Scenes
Take full advantage of your TP-LINK Smart Home
devices in your home with “Scenes”. A scene is a preset
group of Smart Devices (such as Smart Plugs and
Smart Switches) that can be customized and controlled
simultaneously at the touch of a button from your
smartphone or tablet to easily set your mood or t any
special occasion. For example, set a customized “Movie
Time” to turn on the home theater system plugged
into a Smart Plug and dim down the lights in your
Entertainment Room to 10% at the same time.
Please keep in mind that SCENES can only be set and
controlled once you’re signed in to your Kasa account.
15www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Devices
Scenes
Scenes let you set the mood of your
home in one tap.
Good Morning
Get ready for the day by
turning on your devices
Movie Night
Dim the lights for
showtime
Good Night
Turn everything off
before bedtime
Custom
Create your own scene
9:41 PM 100%
Scenes
1. On the main Home screen, tap the (Scenes) tab
to switch to the Scenes view.
2. Choose one of the preset scenes to start, or
choose Custom to set up your own scene that is
personalized to suit your liking. To set a scene,
you will need to select one or more devices to be
controlled, and then dene their actions and/or
states.
16www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Bedroom Lamp
BULBS
PREVIEW
Main Kitchen Lights
Side Kitchen Lights
Christmas Gnome
SWITCHES
PLUGS
60%
Party Bulb
ON
OFF
Next
9:41 PM 100%
Set Scene
!
Note that you must have at least one Smart Device
in order to create a scene.
Away Mode
Away Mode allows you to automate your Smart
Switches in combination with other Smart Home
products to respond to your specic schedules. For
example, turn on and off Smart Devices at certain
intervals to simulate occupancy when you’re away from
home.
17www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Away Mode
9:41 PM 100%
Schedules
Devices
2
3
When you’re Away, your devices will turn
on and off to simulate that someone is
home.
Select Devices
9:41 PM 100%
How about picking one light from each
room?
Christmas Gnome
Garage Light
Party Bulb
Living Room
Bedroom Lamp
!
PLUGS
BULBS
SAVE
1. Tap the (navigation drawer) and then Away
Mode.
2. Tap Select Devices to select your Smart Home
devices, and then tap Save.
3. If you want to set a schedule to automate Away
Mode so you don’t have to manually activate it, tap
Set Schedule.
Note: Multiple schedules can be set to repeat
weekly on the day(s) of your choice.
4. Within the Create Event screen, set your preferred
mode (Away or Home), time, and day(s).
18www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
5. Tap Save.
You can always toggle Away Mode on and off in the
sidebar by tapping on the translucent button under the
Kasa logo.
Energy Monitoring
With energy usage monitoring capability, you get a real-
time energy consumption report (average daily, weekly,
and monthly) on your Smart Switches.
Current Power
2.80
w
Total Consumption
3.10
kWh
Daily Average
5.00 kWh
Total Consumption
35.0 kWh
Energy Usage
9:41 PM 100%
Daily Average
4.00 kWh
Total Consumption
120 kWh
TODAY
PAST 7 DAYS
PAST 30 DAYS
19www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
1. On the Devices screen, tap on the row of the Smart
Switch to go to its controls.
2. Tap the (Usage).
20www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Maintaining the Smart Switches
Firmware Update
To keep the Smart Switches happy and up-to-date with
all the latest improvement and xes, we recommend
that you update the rmware when updates are
available.
Firmware Update
9:41 PM 100%
New Updates Available
Smart Plugs
Latest Version: 1.2.0 UPDATE
We found available rmware updates for your
reachable devices.
4 Available Updates
Smart Bulb HS100
Latest Version: 1.2.0 UPDATE
2 Available Updates
Smart Bulb HS120
Latest Version: 1.2.0
0 Available Updates
9:41 PM 100%
Updating rmware
Please do not unplug your devices during
the update.
25%
This process may take a few minutes.
1. Launch Kasa.
2. Tap the (navigation drawer) and then Settings.
3. Tap Firmware Update.
4. Within the Firmware Update screen, tap Update.
21www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Remember: Only the Smart Switches that are currently
reachable and have an available update will be shown in
the Firmware Update screen.
It is important to leave the Kasa app running while
it nishes updating the Smart Switches. Try not to
minimize the app, close the app, or interrupt the update
to prevent problems.
Resetting
Resetting the Smart Switch can help you troubleshoot
Please keep in mind that factory resetting a device will
erase all of your custom settings and restore them to
factory default settings.
RESET
22www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
The RESET button located underneath the Smart
Switch has two functions:
• Press and hold (about 5 seconds) until the Wi-Fi
status LED blinks amber and green alternately to
initiate App-Cong mode.
• Press and hold (about 10 seconds) until the Wi-Fi
status LED blinks green rapidly to reset the Smart
Switch to factory defaults. Note that factory setting
the Smart Switch will erase all of your custom
settings, and you’ll have to set it up again.
23www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Troubleshooting
Frequently Asked Questions
1. What should I do when I can’t turn the Smart Switch
on/off manually?
If the Smart Switch doesn’t respond when pressing
the physical switch:
• Make sure that you restore power to the Smart
Switch at the circuit breaker.
• Make sure the Smart Switch is wired correctly.
Please consult with a qualied electrician.
2. What should I do when the Smart Switch won’t
respond to commands or scheduled automations?
• Check your network connectivity.
• Check if the Wi-Fi status LED on the Smart
Switch is lit green. If it is amber or blinking
amber and green, reconnect the Smart Switch to
your Wi-Fi network.
• Do not use a metal faceplate with the Smart
Switch to prevent Wi-Fi signal interference.
• Power cycle your router and/or reboot the
Smart Switch by pressing the RESTART button
24www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
underneath the switch.
• Factory reset the Smart Switch by pressing
and holding the RESET button. You’ll need to
recongure the Smart Switch again.
3. How far can I be and still able to control my lights
via the Smart Switch?
You can be anywhere in the world and still able to
control your lights as long as you have an active
Internet connection and Remote Control enabled.
4. Can I install two or more Smart Switches to control
one light xture?
No. The Smart Switch is designed for single-pole
(one location) wiring only and requires a neutral
wire for operation.
Usage Tips
• Place the Smart Switch within the range of your Wi-
Fi router or access point (approximately 150 feet).
• Avoid physical obstructions and radio interference
in the surrounding area.
25www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Support
Should you encounter any issues with the Smart Wi-Fi
Light Switch, please visit our support page at
www.tp-link.com/support for web support and
troubleshooting information.
26www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
Specications
Limited Warranty
The Smart Wi-Fi Light Switch is warranted to the
original purchaser to be free from defects in material
and workmanship under normal consumer use for a
period of one (1) year from the date of retail purchase.
TP-LINK’s responsibility with respect to this limited
warranty shall be limited solely to repair or replacement,
at TP-LINK’s discretion, of any product that fails during
normal use of this product in its intended manner and in
its intended environment.
The warranty does not cover damage or defect caused
by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance.
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
27www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including
interference that may cause undesired operation.
Any changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modications to this equipment. Such modications
could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for
an uncontrolled environment. This device and its antenna must not be co-
located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant
is applicable to only Mobile Congurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating in conjunction
28www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
with any other antenna or transmitter.”
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause
radio interference, in which case the user may be required to take adequate
measures.
RF Exposure Information
This device meets the EU requirements (1999/5/EC Article 3.1a) on the
limitation of exposure of the general public to electromagnetic elds by way of
health protection.
The device complies with RF specications when the device used at 20 cm
from your body.
Canadian Compliance Statement
This device complies with Industry Canada license-exempt RSSs. Operation is
subject to the following two conditions:
1) This device may not cause interference, and
2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1) l’appareil ne doit pas produire de brouillage;
2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, meme si le brouillage est susceptible d’en compromettre le
fonctionnement.
Radiation Exposure Statement
29www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated
with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations
Cet équipement est conforme aux limites d’exposition aux rayonnements
IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
Korea Warning Statements
당해 무선설비는 운용중 전파혼신 가능성이 있음.
NCC Notice
注意！ 依據 低功率電波輻射性電機管理辦法
第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得
擅自變更頻率、加大功率或變更原設計之特性或功能。
第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾
現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規
定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波
輻射性電機設備之干擾。
減少電磁波影響，請妥適使用。
安全諮詢及注意事項
• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
• 注意防潮，請勿將水或其他液體潑灑到本產品上。
• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋
30www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
開口。
• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位
置中。
• 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項
工作。
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на
відповідність вимогам нормативних документів та вимогам, що
передбачені чинними законодавчими актами України.
Safety Information
• When product has a power button, the power button is one of the ways
to shut off the product; when there is no power button, the only way to
completely shut off the power is to disconnect the product or the power
adapter from the power source.
• Don’t disassemble the product, or make repairs yourself. You run the risk of
electric shock and voiding the limited warranty. If you need service, please
contact us.
• Avoid water and wet locations.
31www.tp-link.com
User’s manual Smart Wi-Fi Light Switch
AC voltage
RECYCLING
This product bears the selective sorting symbol for Waste
electrical and electronic equipment (WEEE). This means
that this product must be handled pursuant to European
directive 2012/19/EU in order to be recycled or dismantled
to minimize its impact on the environment.
User has the choice to give his product to a competent
recycling organization or to the retailer when he buys a
new electrical or electronic equipment.