TP Link Technologies RE220 AC750 Wi-Fi Range Extender User Manual

TP-Link Technologies Co., Ltd. AC750 Wi-Fi Range Extender

User Manual

REV3.0.0    1910012376AC750 Wi-Fi Range ExtenderRE200 / RE220User Guide
ContentsAbout This Guide  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Chapter 1.  Get to Know About Your Extender . . . . . . . . . . . . . . . . . . . . . . . . .21. 1.  Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  31. 2.  Appearance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31. 2. 1. LED Explanation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41. 2. 2. Port and Button Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Chapter 2.  Set Up Internet Connection  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52. 1.  Power On the Extender  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62. 2.  Set Up the Extender  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62. 2. 1. Method 1: Via the TP-Link Tether App. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  62. 2. 2. Method 2: Via a Web Browser. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72. 2. 3. Method 3: Via the WPS Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Chapter 3.  Customize Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  133. 1.  Check Internet Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143. 2.  Configure Wireless Network  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153. 3.  Change LAN Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163. 4.  Specify DHCP Server Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173. 5.  Adjust Wi-Fi Coverage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183. 6.  Set Access Control  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193. 7.  Set High Speed Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Chapter 4.  More Features of Your Extender. . . . . . . . . . . . . . . . . . . . . . . . .  224. 1.  Use Your Extender as a Wireless Adapter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234. 2.  Transform Your Existing Wired Network to a Wireless One  . . . . . . . . . . . . . . . . . . . 234. 2. 1. To Set Up the Extender as an Access Point  . . . . . . . . . . . . . . . . . . . . . . . . . . . 234. 2. 2. To Connect Your Wireless Devices to the Extender via WPS. . . . . . . . . . . 25Chapter 5.  Manage Your Extender   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  275. 1.  Set System Time  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285. 2.  Control LEDs  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285. 3.  Set Power Schedule  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 295. 4.  Upgrade the Firmware  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305. 5.  Backup and Restore Configuration Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 315. 6.  Change Login Password  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 325. 7.  Check System Log  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  34
1About This GuideThis guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them. When using this guide, please notice that features of the extender may vary slightly depending on the model and software version you have, and on your location, language, and internet service provider. All screenshots, images, parameters and descriptions documented in this guide are used for demonstration only.ConventionsIn this guide the following conventions are used:Convention DescriptionUnderline Underlined words or phrases are hyperlinks. You can click to redirect to a website or a specific section. Teal Contents to be emphasized and texts on the web page are in teal, including the menus, items, buttons and so on.>The menu structures to show the path to load the corresponding page. For example, Advanced > Wireless > MAC Filtering means the MAC Filtering function page is under the Wireless menu that is located in the Advanced tab.Note: Ignoring this type of note might result in a malfunction or damage to the device.Tips: Indicates important information that helps you make better use of your device.More InfoThe latest software, management app and utility are available from Download Center at www.tp-link.com/support.The Quick Installation Guide can be found where you find this guide or inside the package of the extender.Specifications can be found on the product page at http://www.tp-link.com.A Technical Support Forum is provided for you to discuss our products at  http://forum.tp-link.com.Our Technical Support contact information can be found at the Contact Technical Support page at www.tp-link.com/support.
Chapter 1Get to Know About Your ExtenderThis chapter introduces what the extender can do and its appearance. It contains the following sections:•  Product Overview•  Appearance
3Chapter 1 Get to Know About Your Extender1. 1.  Product OverviewBring Dead Zones Back to LifeTired of Wi-Fi “dead zones”? The TP-Link extender is connected to your router wirelessly, strengthening its signal and expanding its coverage into areas that could not otherwise be reached.Easy Installation & Quick PositionThe extender works with any standard wireless router. Instantly connect the extender to a router by pressing the router’s WPS button (if available) followed by the extender’s WPS button. Alternatively, follow the Quick Setup instructions on the extender’s web management page. Once the extender is connected to a router, you can relocate it to your preferred location with no further configuration required. The intelligent signal light can help to find the best location.Easy Management with the TP-Link Tether AppTether provides a simple, intuitive way to access and manage your extender with your smart devices.1. 2.  Appearance
4Chapter 1 Get to Know About Your Extender1. 2. 1.  LED ExplanationYou can check the extender’s working status by following the LED Explanation table.Name Status Indication5GHz On/Off The extender is connected or not connected to the 5GHz wireless network of your host router.2.4GHz On/Off The extender is connected or not connected to the 2.4GHz wireless network of your host router. (Signal)Solid green The extender is connected to your router’s wireless network and is in a suitable location.Solid red The extender is experiencing poor signal strength. Try relocating it closer to your host router.Off No wireless connection is established. (Ethernet) On/Off The Ethernet port is connected or not connected to a powered-on device. (Power)On/Off The extender is on or off.Blinking The system is starting up or firmware is being upgraded. (WPS)On WPS connection is established.Blinking WPS connection is in progress.Off WPS connection has been established for more than 5 minutes or WPS connection failed.1. 2. 2.  Port and Button DescriptionPorts or Buttons Description (WPS Button)Press the WPS button on your host router, and immediately press   on the extender for 1 second. The   LED of the extender should change to solid on, indicating successful WPS connection.RESET (Hole) Use a pin to press the button for 1 second to reset the extender.Ethernet Port Connect your device to the Ethernet port of the extender via an Ethernet cable to join the Wi-Fi network.
Chapter 2Set Up Internet ConnectionThis chapter introduces how to boost your host wireless coverage. Please follow the step-by-step instructions to set up the internet connection.It contains the following sections:•  Power On the Extender•  Set Up the Extender
6Chapter 2 Set Up Internet Connection2. 1.  Power On the ExtenderPlug the extender into an electrical outlet near your host router, and then wait until the Power LED is solid on.Note: For safety, we suggest that you plug the extender in upright directions as shown below.On2. 2.  Set Up the ExtenderThere are three ways to set up the extender: via the TP-Link Tether app, via a web browser, or via the WPS button. 2. 2. 1.  Method 1: Via the TP-Link Tether App1. Launch the Apple App Store or Google Play Store and search TP-Link Tether or simply scan the QR code to download and install the app.OR2. Go to Wi-Fi Settings and connect your device to the extender’s wireless network:  TP-Link_Extender.Wi-FiWi-Fi TP-Link_ExtenderCHOOSE A NETWORK...Other...< Settings3. Launch Tether and select your extender from the Local Device list.
7Chapter 2 Set Up Internet Connection4. Create a password to log in.5. Follow app instructions to set up and relocate your extender.Tips: For more intuitive location assistant, access extender settings via Tether and go to Tools > Location Assistant. You can also manage your extender via Tether, such as controlling LEDs, sharing passwords of your networks and blocking devices.2. 2. 2.  Method 2: Via a Web Browser1. Connect your computer to the extender via your Ethernet cable, or connect wirelessly as follows:•  For Windows Users 1 )  Unplug the Ethernet cable from your computer (if any).2 )  Click the Wi-Fi icon on the taskbar and connect to the extender’s wireless network: TP-Link_Extender.
8Chapter 2 Set Up Internet ConnectionConnections are availableWireless Network ConnectionTP-Link_ExtenderConnect automatically Connect√•  For Mac OS X Users1 )  Unplug the Ethernet cable from your computer (if any).2 )  Click the Wi-Fi icon in the top right corner of the screen, and connect to the extender’s network: TP-Link_Extender.Wi-Fi: OnTu rn Wi-Fi OJoin Other Network...Create Network...Open Network Preferences...TP-Link_Extender2. Follow the instructions of the Quick Setup Wizard to connect the extender to your host router.1 )  Launch a web browser, enter http://tplinkrepeater.net or http://192.168.0.254 in the address bar, and then create a password to log in.Tips: If the login window does not appear, please refer to FAQ.2 )  Select your host router’s 2.4GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next.
9Chapter 2 Set Up Internet Connection3 )  Select your host router’s 5GHz SSID (network name), enter its password (NOT the password you just created for management), and click Next.Tips: If your host router does not support 5GHz wireless network, please click Skip to continue.4 )  Confirm your host network password.5 )  Either keep the default SSIDs (network names) or customize them for the extended networks, and then click Next.
10Chapter 2 Set Up Internet Connection6 )  Follow web instructions to relocate your extender for optimal Wi-Fi coverage and performance, and then click Done.7 )  Enjoy! Connect to the extended network and enjoy the internet.
11Chapter 2 Set Up Internet Connection2. 2. 3.  Method 3: Via the WPS ButtonUse this way if your router has a WPS button. The button might look like one of these:  . 1. Press the WPS button on your host router, and then press the WPS button on the extender for 1 second within 2 minutes.Note:For more information about using WPS button on your host router, please refer to the router manufacturer’s user guide.2. Wait until the WPS LED   changes to solid on, which indicates that the WPS connection is successful.   Note:If the LED does not turn solid on, try again or refer to Method 1: Via the TP-Link Tether App or Method 2: Via a Web Browser.3. If the extender connects to a dual band router, repeat steps 1 and 2 above to connect to the other band.4. Wait until the Signal LED   turns solid on, setup is done.
12Chapter 2 Set Up Internet ConnectionExtended Network Names: Router’s network name with _EXT at the endPasswords: Same as your routerSolid OnNote:If you want to customize the extended network name, refer to Configure Wireless Network.5. Relocate your extender for optimal Wi-Fi coverage and performance.1 )  Plug in the extender about halfway between your router and the Wi-Fi dead zone. The location you choose must be within the range of your router.2 )  Wait for about 2 minutes until the Signal LED   turns solid green. If it doesn’t, relocate the extender closer to the router to achieve better signal quality.Router DevicesHalfwaySuitable locationToo far from routerNo connectionTips: To minimize signal interference, please choose a location which is far away from Bluetooth devices and other household electronic devices, such as cordless phones, microwave ovens and baby monitors.6. Enjoy! Connect to the extended network and enjoy the internet.
Chapter 3Customize Your NetworkThis chapter guides you on how to configure network settings that are available for this extender.It contains the following sections:•  Check Internet Status•  Configure Wireless Network•  Change LAN Settings•  Specify DHCP Server Settings•   Adjust Wi-Fi Coverage•   Set Access Control•  Set High Speed Mode
14Chapter 3 Customize Your Network3. 1.  Check Internet StatusYou can view the internet status of your extender to check whether you have successfully set up the extended network(s).1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > Status to view the internet status of your extender.•  The extender runs normally.•  The extender fails to connect to the host networks. Please go to Settings > Wireless > Connect to Network to check whether the host network passwords are correct. If the problem still exists, relocate the extender closer to the router to achieve better signal quality.•  The extender is connected to the host networks, but is not transmitting data. Please check the internet connection of your router.•  The extender is connected to the router abnormally. Please go to Settings > Network and try setting your extender to obtain an IP address automatically.Click the icon of the Internet/Router/Range Extender/Clients to view corresponding information.
15Chapter 3 Customize Your Network3. 2.  Configure Wireless NetworkIf you want to extend another host network after Quick Setup, you can refer to this section. Moreover, you can change the wireless settings for your extended networks. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.Note: Here we take the configuration of the 2.4GHz network as an example. If the 5GHz network is available on your extender, please refer to the instructions to set your 5GHz network. ¾To extend another host network:1. Go to Settings > Wireless > Connect to Network.2. Enable Connect to 2.4GHz Network and click Wireless Scanner to find all available networks.3. Select the 2.4GHz host network you want to extend.Note: If the network you want to extend is on but not listed, please try the following steps.· Move the extender closer to your router, and click Rescan in the top-right corner of the list.· You can manually enter the SSID (network name) and password of the network you want to extend, and click Save.4. Once a host network is selected, the SSID and security type will be automatically filled in. If the selected network is encrypted, enter the password in the Password field.5. Click Save. ¾To enable or disable the extended network:
16Chapter 3 Customize Your Network1. Go to Settings > Wireless > Extended Network. 2. Extended networks are enabled by default. If you want to disable the wireless function of a certain band, just clear the Enable checkbox. In this case, all the wireless settings of this band will be invalid.3. Click Save. ¾To change the wireless network name (SSID):1. Go to Settings > Wireless > Extended Network. 2. Create a new SSID in Extended 2.4GHz SSID or click Copy Host SSID. The value is case-sensitive.3. Click Save.Note: If you have changed the wireless settings via a wireless device, you will be disconnected after the settings are applied. Please write down the new SSID for future use. ¾To hide the SSID of the extended network:1. Go to Settings > Wireless > Extended Network. 2. Select Hide SSID broadcast, and the corresponding SSID will not be displayed when  wireless devices scan for local wireless networks. You need to manually enter the SSID to join the network. 3. Click Save.3. 3.  Change LAN SettingsThe extender is preset with a default LAN IP 192.168.0.254, with which you can log in to the web management page. The LAN IP address, together with the Subnet Mask, also defines the subnet that the connected devices are on. If the IP address conflicts with another device on your local network or your network requires a specific IP subnet, you can change it.1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Network. 3. Select Use the following IP address.4. Enter a new IP Address as needed and leave the Subnet Mask as the default settings and enter the gateway that is in the same subnet as the IP address. The gateway is usually the LAN IP address of your extender.
17Chapter 3 Customize Your Network5. Click Save. 3. 4.  Specify DHCP Server SettingsBy default, the DHCP (Dynamic Host Configuration Protocol) Server is enabled and the extender acts as a DHCP server; it dynamically assigns TCP/IP parameters to client devices from the IP Address Pool. You can change the settings of the DHCP Server if necessary.1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > Network. ¾To specify the IP address that the extender assigns:1. Select Auto (recommended) or On to enable the DHCP Server.2. Enter the starting and ending IP addresses in the IP Address Pool.3. Enter other parameters if the ISP requires them. The Default Gateway is automatically filled  in and is the same as the LAN IP address of the extender.4. Click Save.
18Chapter 3 Customize Your Network ¾To view the DHCP Client List:You can view the information of the DHCP clients connected to the extender in the DHCP Client List.3. 5.  Adjust Wi-Fi CoverageYou can set the extender’s Wi-Fi coverage depending on how large you want your Wi-Fi area to be.1. Visit http://tplinkrepeater.net and log in with the password you set for the extender.2. Go to Settings > Advanced Settings > Wi-Fi Coverage.3. Select your desired Wi-Fi coverage level for the extender.4. Click Save.
19Chapter 3 Customize Your Network3. 6.  Set Access ControlAccess Control allows you to permit or block specific devices from accessing the internet for a specific period.1. Visit http://tplinkrepeater.net and log in with the password you set for the extender.2. Go to Settings > Advanced Settings > Access Control.3. Enable Access Control. ¾To block specific device(s):Note: Devices connected to the extender via an Ethernet cable cannot be blocked.1. Select Blacklist and click Save.2. Select the device to be blocked in the Online Devices table by ticking the corresponding checkbox.3. Click Block and the selected device(s) will be added to the Devices in Blacklist table.4. Click in the Devices in Blacklist table to set the Effective Time for a certain entry as needed.
20Chapter 3 Customize Your Network5. Click OK. ¾To permit specific device(s):1. Select Whitelist and click Save.2. Click Add in the Devices in Whitelist table. Enter the Device Name and MAC Address. And you can set the Effective Time for a certain entry as needed.3. Click OK.
21Chapter 3 Customize Your Network3. 7.  Set High Speed ModeThe High Speed feature switches off one of the wireless bands to leave one high-performance, super-fast network, ideal for HD streaming and gaming applications.If most of your devices are connected to one wireless band, this feature can increase the overall performance of your wireless network. Note: Before enabling this feature, please go to Settings > Wireless > Extended Network and check that the 2.4GHz and 5GHz bands are both enabled. Additionally, if you are going to disable the 2.4GHz network, it’s recommended to first make sure all your wireless devices support 5GHz network connection.1. Visit http://tplinkrepeater.net and log in with the password you set for the extender.2. Go to Settings > Advanced Settings > High Speed.3. Enable High Speed Mode.4. Select the Auto mode. The extender will decide which band the high-speed network will work on based on its wireless connection to your host router. The other band will be disabled. 5. Click Save.
Chapter 4More Features of Your ExtenderThis chapter explains how to use the extender as a wireless adapter and as an access point .It contains the following sections:•  Use Your Extender as a Wireless Adapter•  Transform Your Existing Wired Network to a Wireless One
23Chapter 4 More Features of Your Extender4. 1.  Use Your Extender as a Wireless AdapterThe extender can be used as a wireless adapter to connect any wired-only device, such as a Blu-ray player, game console, DVR, or smart TV, to your wireless network.After configuration, you can connect an Ethernet-enabled device to the extender via an Ethernet cable. Note: Extenders that have no Ethernet port do not support this feature.Smart TVGame ConsoleDesktopRouterBy default, the Ethernet port of the extender is connected to the 5GHz wireless netwok.  ¾To change the connected wireless frequency:1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > Network.3. Select 2.4GHz or 5GHz and click Save.4. 2.  Transform Your Existing Wired Network to a Wireless OneThe extender can work as an access point, transforming your existing wired network to a wireless one. 4. 2. 1.  To Set Up the Extender as an Access Point1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Click Mode in the top right corner of the page. Select Access Point and click Save. The extender will reboot and switch to Access Point mode.
24Chapter 4 More Features of Your Extender3. After rebooting, connect the extender to your modem or wired router via an Ethernet cable.4. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.5. Go to Quick Setup to configure your extender.1 )  Select your time zone, and click Next.2 )   Configure your wireless settings and click Next.  3 )  Confirm the information and click Finish. Now, you can enjoy Wi-Fi.
25Chapter 4 More Features of Your Extender4. 2. 2.  To Connect Your Wireless Devices to the Extender via WPSWi-Fi Protected Setup (WPS) provides an easier way to set up a secure Wi-Fi connection.Wireless devices that support WPS, including Android phones, tablets, and most USB network cards, can be connected to your extender through this method (not supported by iOS devices).1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > Wireless > WPS. 3. Enable WPS.4. Connect via WPS:•  AP’s PIN: Enable AP’s PIN and enter the PIN on your device. You can click Generate to get a new PIN or click Default to restore the PIN to its factory one.•  Push Button (Recommended): Click Connect and push the WPS button on the client device.
26Chapter 4 More Features of Your Extender•  PIN code: Enter the client’s PIN, and click Connect.
Chapter 5Manage Your Extender This chapter presents how to manage and maintain your extender.It includes the following sections:•  Set System Time•  Control LEDs•  Set Power Schedule•  Upgrade the Firmware•  Backup and Restore Configuration Settings•  Change Login Password•  Check System Log
28Chapter 5 Manage Your Extender 5. 1.  Set System TimeThe System Time of the extender will be used for time-based function such as the Power Schedule function. If you have enabled the Daylight Saving Time feature, the system time will be sychronized with the daylight saving time you configure.1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > Time Settings.  ¾To get system time:1. Select your local Time Zone from the drop-down list.2. Click Save. ¾To set up Daylight Saving Time:1. Select Enable Daylight Saving Time.2. Select the Start and End date and time of the daylight saving time at your local time zone.3. Click Save.5. 2.  Control LEDsThe LEDs of the extender indicate its activities and status. You can turn off LEDs when you don’t need them.1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.
29Chapter 5 Manage Your Extender 2. Go to Settings > System Tools > LED Control.  ¾To turn off the LEDs:Disable LED Status. ¾To specify a time period when LEDs are off:1. Select  Night Mode.2. Specify the LED off time period.3. Click Save. 5. 3.  Set Power ScheduleThe Power Schdule feature allows you to specify a time period during which the extender is off.1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > Advanced Settings > Power Schedule.  ¾To specify a time period when the extender is off:1. Click Add.2. Specify the power off time period and repetitive days.
30Chapter 5 Manage Your Extender 3. Click Save. 5. 4.  Upgrade the FirmwareTP-Link is committed to improving product features, giving you a better network experience. You can download the latest firmware file from the Support page at our website www.tp-link.com and upgrade the extender to the latest firmware version.Note: •  Make sure the latest firmware file is matched with the hardware version (as shown in the download section of the Support page).•  Make sure that you have a stable connection between the extender and your computer. It is NOT recommended to upgrade the firmware wirelessly.•  Backup your extender configuration.•  Do NOT power off the extender during the firmware upgrade. 1. Download the latest firmware file for the extender from our website  www.tp-link.com. 2. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.3. Go to Settings > System Tools > Firmware Upgrade.4. Click Browse to locate the downloaded new firmware file, and then click Upgrade.
31Chapter 5 Manage Your Extender 5. Wait a few minutes for the firmware upgrade to complete and the extender to reboot.5. 5.  Backup and Restore Configuration SettingsThe configuration settings are stored as a configuration file in the extender. You can backup the configuration file and restore the extender to the previous settings from the backup file when needed. Moreover, if necessary,  you can erase the current settings and reset the extender to the default factory settings. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > System Tools > Backup & Restore. ¾To backup configuration settings: Click Backup to save a copy of the current settings to your local computer. A ‘.bin’ file of the current settings will be stored on your computer.   ¾To restore configuration settings: 1. Click Browse to locate the backup configuration file stored on your computer, and click Restore.  2. Wait a few minutes for the restore and reboot. Note: During the restore process, do not power off or reset the extender.  ¾To reset the extender to factory default settings:
32Chapter 5 Manage Your Extender 1. Click Factory Restore to reset the extender. 2. Wait a few minutes for the reset and reboot. Note: 1.  During the reset process, do not power off or reset the extender. 2.  We strongly recommend you backup the current configuration settings before resetting the extender.5. 6.  Change Login PasswordThe account management feature allows you to change your login username and password of the web management webpage.1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > System Tools > Admin Account.   3. Enter the old password. Then enter the new password twice (case-sensitive) and click Save.     4.  Use the new password for future logins.5. 7.  Check System LogIf the extender is not working properly, you can save the system log and send it to our technical support team. 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender. 2. Go to Settings > System Tools > System Log. ¾To save the system log locally:1. Choose the type and level of the system log as needed.2. Click Save Log to save the system logs to a local disk.
33Chapter 5 Manage Your Extender
34FAQQ1. How to reset the extender to its factory default settings?•  With the extender powered on, use a pin to press the RESET button for 1 second. The extender will reboot.•  Log in to the extender’s web management page. Go to System Tools > Restore & Backup and click Factory Restore.Q2. What should I do if I forget my login password?Refer to FAQ > Q1 to reset the extender, and then visit http://tplinkrepeater.net to create a new login password.Note: The extender must be reconfigured after a reset to access the internet. Please note down your login password for future logins.Q3. What should I do if I forget my wireless password?In Range Extender mode, the extender shares the same wireless passwords as those of your host networks.In Access Point mode, please connect your computer to the extender using an Ethernet cable and follow the steps below: 1. Visit http://tplinkrepeater.net, and log in with the password you set for the extender.2. Go to Settings > Wireless > Wireless Settings to retrieve or reset your wireless password.Q4. What should I do if I can’t access the web management page?This can happen for a variety of reasons. Please try the methods below to log in again.•  If your computer is wirelessly connected, make sure that you have connected to the extender’s SSID.•  If your computer is connected via an Ethernet cable, please make sure that the connection is stable.•  Make sure your computer is configured as Obtain an IP address automatically and Obtain DNS server address automatically.•  Verify that http://tplinkrepeater.net or http://192.168.0.254 is correctly entered in the web browser and press Enter.•  Use the IP address to access the extender. The default IP is 192.168.0.254. If the extender is connected to the router, you should go to your router’s DHCP client list to obtain the extender’s current IP address.•  Reset the extender and try again.
35Q5. I have enabled wireless MAC filter, wireless access control, or access control list (ACL) on my router. What should I do before configuring the extender?When a device connects through the extender to your router, the MAC address of the device shown on the router is translated to another MAC address. If your router’s MAC filter, wireless access control, or ACL is enabled, the devices  connected to the extender cannot get an IP address from the extender and cannot access the Internet.To solve this problem, please follow the steps below:1. Log in to your router and disable the MAC filter, wireless access control or ACL.Note: For more information about how to disable your router’s MAC filter, wireless access control or ACL, please refer to your router’s user guide.2. Power on your extender, and run the Quick Setup to configure your extender.3. Connect all of your devices to the extended network, and make sure the router’s Link LED remains lit.4. On your router, add all the Online Devices’ MAC addresses to your router’s MAC filter table.5. Enable the router’s MAC filter, wireless access control, or ACL to complete the configuration.
36COPYRIGHT & TRADEMARKSSpecifications are subject to change without notice.   is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.
37FCC compliance information statementProduct Name: AC750 Wi-Fi Range ExtenderModel Number: RE200 / RE220Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.Address: 145 South State College Blvd. Suite 400, Brea, CA 92821Website: http://www.tp-link.com/us/Tel: +1 626 333 0234Fax: +1 909 527 6803E-mail: sales.usa@tp-link.comThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
38FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”This device is restricted in indoor environment only.We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.Issue Date: 2018-12-26
39Canadian Compliance StatementThis device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions:1. This device may not cause interference, and2. This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :1. l’appareil ne doit pas produire de brouillage;2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.Caution:1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;Avertissement:1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Industry Canada StatementCAN ICES-3 (B)/NMB-3(B)Korea Warning Statements당해 무선설비는 운용중 전파혼신 가능성이 있음.NCC Notice & BSMI Notice注意! 依據 低功率電波輻射性電機管理辦法第十二條  經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。
40第十四條  低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。於5.25GHz至5.35GHz區域內操作之無線設備的警告聲明工作頻率5.250~5.350GHz該頻段限於室內使用。安全諮詢及注意事項•  請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。•  清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。•  注意防潮,請勿將水或其他液體潑灑到本產品上。•  插槽與開口供通風使用,以確保本產品的操作可靠並防止過熱,請勿堵塞或覆蓋開口。•  請勿將本產品置放於靠近熱源的地方。除非有正常的通風,否則不可放在密閉位置中。 •  請不要私自打開機殼,不要嘗試自行維修本產品,請由授權的專業人士進行此項工作。限用物質含有情況標示聲明書產品元件名稱限用物質及其化學符號鉛Pb鎘Cd汞 Hg六價鉻 CrVI多溴聯苯PBB多溴二苯醚PBDEPCB ○○○○○○外殼○○○○○○電源供應板 −○○○○○備考1. "超出0.1 wt %" 及 "超出0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。備考2. "○"系指該項限用物質之百分比含量未超出百分比含量基準值。備考3. " − " 系指該項限用物質為排除項目。Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information
41•  Keep the device away from water, fire, humidity or hot environments.•  Do not attempt to disassemble, repair, or modify the device.•  Do not use the device where wireless devices are not allowed. •  The socket-outlet shall be installed near the equipment and shall be easily accessible. Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.Explanations of the symbols on the product labelSymbol ExplanationClass II equipmentAC voltageIndoor use onlyRECYCLINGThis product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.Protection earth

Navigation menu