TP Link Technologies TLWPA4220V3 300Mbps Wi-Fi Range Extender,AV600 Powerline Edition User Manual

TP-Link Technologies Co., Ltd. 300Mbps Wi-Fi Range Extender,AV600 Powerline Edition

User Manual

REV3.0.0 1910012098User GuideAV600 Powerline Wi-Fi ExtenderTL-WPA4220
ContentsAbout This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1Chapter 1. Get to Know Your Powerline Extender . . . . . . . . . . . . . . . . . . . .21. 1. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31. 2. Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31. 3. Product Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31. 3. 1. LED Legend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31. 3. 2. Physical Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Chapter 2. Initial Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62. 1. To Set Up a New Secure Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72. 2. To Extend the Existing Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Chapter 3. Conguring via Web Management Interface. . . . . . . . . . . . 113. 1. Management Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123. 1. 1. Log In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123. 1. 2. Change the Login Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123. 2. Manage Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133. 2. 1. Add a New Device to the Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . 133. 2. 2. Change Powerline Network Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143. 3. Wi-Fi Move . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143. 4. Wi-Fi Clone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153. 5. Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163. 5. 1. Customize Wireless Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163. 5. 2. Wireless Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183. 6. LED Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 183. 7. Schedule Your Wireless Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193. 8. Parental Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 213. 9. Guest Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233. 10. MAC Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243. 11. Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263. 11. 1. LAN IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263. 11. 2. Set Up System Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 263. 11. 3. Upgrade the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 283. 11. 4. Back Up and Restore Conguration Settings . . . . . . . . . . . . . . . . . . . . . . . . 283. 11. 5. System Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1About This GuideThis guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick Internet setup, while this guide contains details of each function and demonstrates how to configure them in typical scenarios. When using this guide, please notice that features of the powerline extender may vary slightly depending on the model and software version you have, and on your location and language. All images, parameters and descriptions documented in this guide are used for demonstration only.ConventionsIn this guide the following conventions are used:Convention DescriptionPowerline extender Stands for AV600 Powerline Wi-Fi Extender without any explanation.Teal_Underlined Hyperlinks are in teal and underlined. You can click to redirect to a website or a specific section. Teal Key information appears in teal, including management page text such as menus, items, buttons and so on. >The menu structures to show the path to load the corresponding page. For example, Wireless > MAC Filter means the MAC Filter function page is under the Wireless menu.Note: Ignoring this type of note might result in a malfunction or damage to the device.Tips: Indicates important information that helps you make better use of your device.Symbols on the web page• click to edit the corresponding entry.• click to delete the corresponding entry.• click to enable or disable the corresponding entry.More Info• The latest software, management app and utility are available from the Download Center at http://www.tp-link.com/support.• The Quick Installation Guide (QIG) can be found where you find this guide or inside the product packaging.• Specifications can be found on the product page at http://www.tp-link.com.• A Technical Support Forum is provided for you to discuss our products at http://forum.tp-link.com.• Our Technical Support contact information can be found at the Contact Technical Support page at http://www.tp-link.com/support.
Chapter 1Get to Know Your Powerline ExtenderThis chapter introduces the powerline extender by detailing its main features and appearance.It contains the following sections:• Product Overview• Main Features• Product Appearance
3Chapter 1 Get to Know Your Powerline Extender1. 1. Product OverviewTP-Link’s Powerline Wi-Fi Extender is a combined wired/wireless network expansion device. With the help of your home’s existing electrical circuitry, it can extend your Wi-Fi to wherever you want in your house. Ethernet ports and built-in antennas enable the powerline Wi-Fi extender to provide wired and wireless access for multiple computers and mobile devices.With an array of additional features, the powerline Wi-Fi extender is the perfect choice for your home or business network.1. 2. Main Features• tpPLC Utility to manage the whole powerline network easily and conveniently.• Wi-Fi Move to synchronize any changes of Wi-Fi Settings and LED schedules across a secured powerline network.• Wi-Fi Clone to copy wireless network name (SSID) and password of your router to the extender at the press of a button.• Guest Network to set a new wireless network for guests without disclosing your own wireless network.• Wi-Fi Schedules to set when your Wi-Fi will be on.• Multiple Ethernet ports to connect the TVs, game consoles, or PCs to the internet at the same time.1. 3. Product AppearanceYour powerline extender may differ in appearance slightly from that depicted because of the region and product version.1. 3. 1. LED LegendLEDs indicate the powerline extender’s working status. For more details, please refer to the following table.
4Chapter 1 Get to Know Your Powerline ExtenderName Status Indication PowerOn/Off The powerline extender is on or off.Blinking Pairing is in progress. PowerlineYellow-greenThe powerline extender is connected to the powerline network and is in a suitable location.Red The powerline extender is experiencing poor signal strength. Try plugging it into another wall socket.Off The powerline extender is not connected to any powerline network. EthernetOn At least one Ethernet port is connected to a powered-on device.Off No Ethernet port is connected to a powered-on device. WirelessOn The wireless function is enabled.Off The wireless function is disabled.BlinkingSlowly: The powerline extender is cloning 2.4GHz wireless network settings from the main router.Quickly: The powerline extender is syncing 2.4GHz wireless network settings.1. 3. 2. Physical InterfaceWi-Fi ButtonPress and hold the button for 1 second to copy wireless settings from the main router to the extender. Go to Wi-Fi Clone for more information.Reset ButtonPlugPair ButtonEthernet PortWi-Fi Button
5Chapter 1 Get to Know Your Powerline ExtenderPress and hold the button for about 5 seconds to turn the wireless function on or off. The wireless function is on by default. You can turn it off at night and then on in the morning by pressing this button.Ethernet PortConnect the Ethernet ports to your wired devices, such as a computer, a router or a game console, via Ethernet cables.Pair ButtonPress and hold the button for 1 second to join a powerline network. Go to To Set Up a New Secure Wireless Network for more information.Press and hold the button for about 8 seconds until the powerline LED turns off to leave the existing powerline network. ResetPress and hold the Reset button for at least 5 seconds to reset the powerline extender to factory default settings. When Reset is triggered properly, all LEDs will turn off and start on again.PlugThe powerline adapter has a Plug that can be connected to any standard power socket.Note: 1. The provided plug may differ from the picture due to different regional power specifications.2. Use the product in below directions.Or3. Plug the product directly into a wall socket instead of a power strip.Wall Outlet Power Strip
Chapter 2Initial UseThis chapter guides you on how to use the powerline extender when you first open the package. It contains the following sections:• To Set Up a New Secure Wireless Network• To Extend the Existing Wireless Network
7Chapter 2 Initial Use2. 1. To Set Up a New Secure Wireless NetworkUse the Powerline Wi-Fi Kit to set up a new secure wireless network in my house.For example, I have a wireless router in my house, but the wireless signal cannot reach every corner. So I bought a Powerline Wi-Fi Kit to extend the wireless network. The Powerline Wi-Fi Kit includes a powerline adapter and a powerline extender.1. Connect the powerline adapter to an available LAN port of the router.2. Plug the powerline adapter into a wall socket.3. Plug the powerline extender into a wall socket near the adapter.RouterWAN LANEthernet Cable600MbpsPowerline Extender TL-WPA4220 Powerline Adapter (For demonstration only) Powerline4. Pair the powerline devices.a . Press the Pair button on the powerline adapter for 1 second. The Power LED starts blinking.Note: If the Power LED does not blink, press it again.b . Within two minutes, press the Pair button on the powerline extender for 1 second. The Power LED starts blinking. I want to:How can I do that?
8Chapter 2 Initial UseWhen the Powerline LED turns solid, the pairing process is complete.OnBlinkingPowerline ExtenderTL-WPA4220within 2 minutes600MbpsBlinkingPowerline Adatper(For demonstration only)5. Relocate the extender to the Wi-Fi “dead” zone. Use the SSID (network name) and password on the provided Wi-Fi Info Card to connect to the internet.Note: A red Powerline LED indicates poor signal strength. Move the extender to another location.Now enjoy the internet with the SSID and password printed on the Wi-Fi Info Card!2. 2. To Extend the Existing Wireless NetworkExtend the existing wireless network by adding a new powerline extender to the existing powerline network.Done!I want to:
9Chapter 2 Initial UseFor example, I already set up a wireless network using powerline devices, but the wireless network is still not big enough to reach the top floor. So I bought a new powerline extender to extend the wireless network.1. Plug the new powerline extender into a wall socket near one of the existing powerline extender. New Powerline ExtenderTL-WPA4220 Existing Powerline Device (For demonstration only) Powerline2. Check the new extender’s Powerline LED . Is it on?• If it is on, follow Step 4 > A.• If it is off, follow Step 3 and Step 4 > B.3. Add the new powerline extender to the existing powerline network by pairing two powerline devices.a . Press the Pair button on the existing powerline device for 1 second. The Power LED starts blinking.Note: If the Power LED does not blink, press again.b . Within two minutes, press the Pair button on the new powerline extender for 1 second. The Power LED starts blinking. When the Powerline LED turns solid, the pairing process is complete.OnBlinkingBlinkingwithin 2 minutesExistingPowerline Device New Powerline ExtenderTL-WPA4220 4. Relocate the new extender to the Wi-Fi “dead” zone. How can I do that?
10Chapter 2 Initial UseNote: A red Powerline LED indicates poor signal strength. Move the extender to another location.A . Use the SSID (network name) and password on the provided Wi-Fi Info Card to connect to the internet.B . Use the SSID (network name) and password of your existing wireless network to connect. Enjoy the Internet through your extended network! Done!
Chapter 3Configuring via Web Management InterfaceThe powerline extender has a management interface to configure all settings. The management interface can be opened on any device that has a web browser, such as Internet Explorer, Chrome or Firefox. This chapter is going to give detailed information on what functions the powerline extender has and how to configure them.It contains the following sections:• Management Interface• Manage Powerline Network• Wi-Fi Move• Wi-Fi Clone• Wireless Network• LED Schedules• Schedule Your Wireless Function• Parental Controls• Guest Network• MAC Filter• Administration
12Chapter 3 Conguring via Web Management Interface3. 1. Management Interface3. 1. 1. Log InThere are two methods to log in to the management interface.Method 1: Via web browserFollow the steps below:1. Connect your device to the powerline extender wirelessly.2. Launch a web browser and type in http://tplinkplc.net to open the management interface.3. Enter admin (the default username and password) for both username and password. We recommend you change them immediately after your first login. 4. Click Login.Method 2: Via tpPLC utilityFollow the steps below:1. Connect your computer to the powerline extender via an Ethernet cable or wirelessly.2. Obtain and install the tpPLC Utility from the product’s Support page at http://www.tp-link.com.3. Open the utility, move your mouse over your powerline extender, and click the icon that appears beside it.4. Enter admin for both username and password. 5. Click Login.3. 1. 2. Change the Login AccountWe strongly recommend you change the login account immediately after the first login.Follow the steps below to change the account.1. Go to System Tools > Administration.
13Chapter 3 Conguring via Web Management Interface2. Follow instructions on the page to set a new username and password. A strong password should be at least 8 characters in length, combining uppercase and lowercase letters, numbers and punctuations. 3. Click Save to make the settings effective.3. 2. Manage Powerline NetworkA powerline network is formed of powerline devices, including adapters and extenders. Powerline devices in the same powerline network share the same powerline network name.3. 2. 1. Add a New Device to the Powerline Network1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to the Status page. Click the Powerline Network icon to see the Powerline Device List.
14Chapter 3 Conguring via Web Management Interface3. Click the add icon and enter the Powerline Key of the device you want to add. The Powerline Key contains 16 capital letters, formed like XXXX-XXXX-XXXX-XXXX. It is printed on the back of the powerline device.4. Click Add to add the device.3. 2. 2. Change Powerline Network NameYou can change the extender’s powerline network name to add it to or remove it from a powerline network.Follow the steps below to change the name.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to Device Settings > Powerline.3. Change the Network Name. You can also click Default to use the default network name, e.g. HomePlugAV. However, if the default name is used, the Wi-Fi Move function will be automatically disabled.4. Click Save to make the settings effective.3. 3. Wi-Fi MoveWi-Fi Move is enabled by default. With the feature enabled, any changes made to the Wi-Fi settings and LED schedules of one powerline extender will be automatically synchronized to other powerline extenders whose Wi-Fi Move feature is also enabled on the same powerline network .
15Chapter 3 Conguring via Web Management InterfaceFollow the steps below to enable the Wi-Fi Move feature:1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to Wireless > Wi-Fi Move.3. Toggle On to enable the feature.Note: When Wi-Fi Move is enabled, the following features will be synced: Wireless SSID & Password, Wireless Security, Wireless Mode, Wireless Radio Status, Wi-Fi Schedules, LED Schedules, Wi-Fi Clone Settings, MAC Filter Settings, Parental Controls, and Guest Network.3. 4. Wi-Fi CloneCopy wireless settings from my router to my extender, so I can use the same SSID and password to access the internet in my house.1. Before cloning, make sure your router supports the same band as your extender. If you do not know how to check this, go to your router’s User Guide for more information.2. Plug your extender near your router.3. Press the WPS button on your router.WPSWAN LANWireless RouterWPS4. Within two minutes, press the Wi-Fi button on the front panel of the extender for 1 second. The Wi-Fi LED starts blinking.I want to:How can I do that?
16Chapter 3 Conguring via Web Management InterfaceWi-Fi ButtonWi-Fi LEDExtenderWhen the Wi-Fi LED blinks quickly for 3 seconds and then stays on, the Wi-Fi Clone process is complete.3. 5. Wireless Network3. 5. 1. Customize Wireless SettingsThe powerline extender’s wireless network name (SSID), password, and security option are preset in the factory. The preset SSID and password can be found on the product label and Wi-Fi Info Card. You can customize the wireless settings according to your needs.Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.Go to Wireless > Settings page.To enable or disable the wireless function:Select the box to enable the wireless function. Deselect the box to disable wireless function. If disabled, all wireless settings will be ineffective.To change the wireless network name (SSID) and password:The default SSID is TP-Link_XXXX, and the default password is printed on the Wi-Fi Info Card. You can change the default ones by directly entering new ones in the field. SSID is up to 32 characters, and the value in both SSID and password is case-sensitive.Note: Remember to write down the new SSID and password, for you will be disconnected when new settings are effective.Done!
17Chapter 3 Conguring via Web Management InterfaceTo hide SSID:Select Hide SSID, and your SSID will not be broadcasted. It won’t display when you scan for local wireless network list on your wireless device and you need to manually join the network.To have more advanced settingsClick Advanced below Password to have more advanced settings.Security: Select an option from the Security drop-down list. The extender provides three options, No Security, WPA/WPA2 Personal (Recommended), and WEP. WPA2 uses the newest standard and the security level is the highest. Don’t change the default settings unless necessary. Mode: Select the desired mode. • 802.11n only: Select only if all of your wireless clients are 802.11n devices.• 802.11g/n mixed: Select if you are using both 802.11g and 802.11n wireless clients.• 802.11b/g/n mixed: Select if you are using a mix of 802.11b, 11g, and 11n wireless clients.Note: When 802.11n only mode is selected, only 802.11n wireless clients can connect to the extender. It is strongly recommended that you select 802.11b/g/n mixed, so that all of 802.11b, 802.11g, and 802.11n wireless clients can connect to the extender.Channel Width: Select the channel width. The default setting is Auto, which can adjust the channel width for your clients automatically.
18Chapter 3 Conguring via Web Management InterfaceChannel: Select the channel you want to use from the drop-down list. This field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point.Transmit Power: Select the level of transmit power. We recommend you choose High to have the best signal strength.3. 5. 2. Wireless ClientsFollow the steps below to view detailed information of all wireless clients connected to the extender.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to Wireless > Clients page. 3. Now you can view the detailed information, including MAC address, connected wireless band, security option as well as the packets transmitted.Tips: You can also see the wireless details by clicking the wireless clients icon on the Status > Wireless Clients page.3. 6. LED SchedulesAutomatically turn off LEDs at times when I do not want light in my room.For example, I want to turn LEDs off everyday from 00:00am to 7:00am.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net and log in with the username and password you set for the extender.2. Go to Device Settings > LED Schedules.3. Enable the LED Scheduler. If you are prompted of changes synchronization, click Continue.I want to:How can I do that?
19Chapter 3 Conguring via Web Management Interface4. Click Add to add an entry.5. Choose LED Off Time from 00:00 to 7:00, and then check all boxes from Sunday to Saturday.Note: Please make sure that the system time is correct before using this function.6. Select Enable this entry to make it effective.7. Click OK to save the settings.Now your LEDs will be turned off automatically at 00:00 and turned on at 7:00am the next morning.3. 7. Schedule Your Wireless FunctionAutomatically turn off my wireless network at times when I do not need the wireless connection.For example, I want to turn them off from 00:00am to 7:00am. Yet if I have my wireless devices connected to the extender at that Done!I want to:
20Chapter 3 Conguring via Web Management Interfacetime, I want the wireless on till all devices are disconnected from the internet.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net and log in with the username and password you set for the extender.2. Go to Wireless > Wi-Fi Schedules.3. Enable the Wi-Fi Scheduler. If you are prompted of changes synchronization, click Continue.4. Check the box of Do not turn off Wi-Fi while clients are connected to it and click Save.5. Click Add to add an entry.6. Choose 00:00 and 7:00 from the drop-down list. Check all boxes from Sunday to Saturday.Note: Please make sure that the system time is correct before using this function.7. Select Enable this entry to make it effective.How can I do that?
21Chapter 3 Conguring via Web Management Interface8. Click OK to save the settings.Now your Wi-Fi will be automatically turned off at 00:00 and turned on at 7:00am the next morning.Note:The Wi-Fi LED will turn off if the wireless network is disabled.3. 8. Parental ControlsControl when my children’s wireless devices can access the internet.For example, I want to allow my children’s wireless devices to access only from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other times.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to Parental Controls.Done!I want to:How can I do that?
22Chapter 3 Conguring via Web Management Interface3. Enable Parental Controls. If you are prompted of changes synchronization, click Continue.4. Click Add.5. Click View Existing Devices, and select the device to be controlled. Or, enter the MAC Address manually.6. Click the icon to set the Internet Access Time. Drag the cursor over the appropriate cell(s) and click Save. Note: Please make sure that the system time is correct before using this function.7. Enter a Description for the entry.8. Select Enable this entry to make it effective.
23Chapter 3 Conguring via Web Management Interface9. Click OK to save the settings.Now the controlled device can access only from 18:00 (6PM) to 22:00 (10PM) on weekdays and not other times.3. 9. Guest NetworkCreate a network for my guests, providing internet access for them while at the same time limit the network authorities for guests to ensure network security and privacy.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the password you set for the extender.2. Go to Guest Network.3. Check the box of relative entry to limit network authorities. If you have problems understanding these items, click the question mark on the upper right corner to have more information.4. Click Save to make the settings effective. If you are prompted of changes synchronization, click Continue.Done!I want to:How can I do that?
24Chapter 3 Conguring via Web Management Interface5. Configure the following settings.To enable or disable the guest network function:Select the box to enable the guest network function. Deselect the box to disable guest network function. If disabled, all guest network settings of the corresponding band will be ineffective.To change the guest network name (SSID) and password:The default SSID is TP-Link_Guest_XXXX, and the default password is printed on the Wi-Fi Info Card. You can change the default ones by directly entering new ones in the field. SSID is up to 32 characters, and the value in both SSID and password is case-sensitive.Now you can tell your guests to connect to the guest network you created.3. 10. MAC FilterThis function exploits the uniqueness of the MAC (Medium Access Control) address, a unique 12-digit hexadecimal address (for example, D8-5D-4C-B4-46-EA) of every network device, to determine if the device can or cannot access your wireless network.Prevent unauthorized users from accessing my wireless network by utilizing the network device’s MAC address.For example, I have a computer that is connected to my wireless Done!I want to:
25Chapter 3 Conguring via Web Management Interfacenetwork. Now, an unknown device (an intruder) is also using my wireless network, which affects my internet speed. I would like to control my wireless network with the following capabilities:• My computer is always allowed to access the wireless network.• The unknown device is not allowed to access the wireless network.• I don’t have to keep changing my wireless password as often.1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to Wireless > MAC Filter.3. Enable MAC Filter. If you are prompted of changes synchronization, click Continue.4. Select either of the filtering rules (here we select Block wireless access from the devices listed below), and then click Save.5. Click Add under Device List to add devices to the list.How can I do that?
26Chapter 3 Conguring via Web Management Interface6. Click View Devices to see how many devices are now connected to the network. Click Choose to choose a device. You can also enter the MAC Address manually.7. Give a description of the entry in the Description field. (Optional)8. Select Enable this entry to make this entry effective.9. Click OK to save the settings.Now MAC Filter is implemented to protect your wireless network.3. 11. Administration3. 11. 1. LAN IP AddressFollow the steps below to configure LAN settings of the extender.Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.Go to Device Settings > LAN Settings.LAN Type: Select Dynamic IP to have your extender automatically obtain IP Address from the main router. Select Static IP to manually configure the LAN parameters.IP Address: The IP address of the powerline extender.Subnet Mask: The subnet mask associated with IP address.Default Gateway: The IP address of the gateway device.3. 11. 2. Set Up System TimeSystem time is the time displayed while the extender is running. The system time you configure here will be used for other time-based functions like Parental Controls and Wi-Fi Schedules. You can manually set how to get the system time. Done!
27Chapter 3 Conguring via Web Management InterfaceConnect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender. Go to System Tools > Time Settings page. To automatically synchronize the time:1. Select your local Time Zone from the drop-down menu.2. In the NTP Server I field, enter the IP address or domain name of your desired NTP Server. (Optional)3. In the NTP Server II field, enter the IP address or domain name of the second NTP Server. (Optional)4. Click Get GMT and click Save.To manually set the date and time:1. In the Time Settings field, select your local Time Zone.2. Enter the current Date.3. Set the current Time (In 24-hour clock format, e.g. 16:00:00 is 04:00PM).4. Click Save.To set up Daylight Saving time:
28Chapter 3 Conguring via Web Management Interface1. Select Enable Daylight Saving.2. Select the correct Start date and time when daylight saving time starts at your local time zone.3. Select the correct End date and time when daylight saving time ends at your local time zone.4. Click Save.3. 11. 3. Upgrade the FirmwareTP-Link is dedicated to improving and richening the product features, giving you a better network experience. We will release the latest firmware at our official website, you can download the latest firmware file from our website: www.tp-link.com and upgrade the firmware to the latest version. 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to System Tools > Firmware Upgrade page and confirm the Hardware Version.3. Go to www.tp-link.com. Download the latest firmware file for the extender. Note: The upgraded firmware version must correspond to the hardware.4. Click Browse to locate the downloaded new firmware file, and click Upgrade. 5. Wait a few minutes for the upgrading and rebooting. Note: 1. Before upgrading the firmware, it’s better to back up your current settings. 2. During the upgrading process, do not turn off or reset the extender.3. If the upgrade is interrupted, it’s possible your extender may stop working and its LEDs blink once a second. In this case, please connect your computer to the extender via an Ethernet cable, and set your computer to static IP 192.168.0.X and subnet mask 255.255.255.0. Then visit http://192.168.0.254 to complete the upgrade.3. 11. 4. Back Up and Restore Configuration SettingsThe configuration settings are stored as a configuration file in the extender. You can back up the configuration file to your computer for future use and restore the extender to a previous settings from the backup file when needed. Moreover, if needed, you can erase the current settings and reset the extender to the default factory settings.
29Chapter 3 Conguring via Web Management InterfaceTo backup configuration settings: 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to System Tools > Backup & Restore page.3. Click Backup to save a copy of the current settings to your local computer. A config.bin file will be stored to your computer. To restore configuration settings: 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to System Tools > Backup & Restore page.3. Click Browse to locate the backup configuration file stored on your computer, and click Restore. The configuration file is config.bin.4. Wait a few minutes for the restoring and rebooting. Note: During the restoring process, do not turn off or reset the extender. To reset the extender to factory default settings: 1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to System Tools > Backup & Restore page.3. Click Factory Restore to reset the extender. 4. Wait a few minutes for the resetting and rebooting. Note: 1. During the resetting process, do not turn off the extender.
30Chapter 3 Conguring via Web Management Interface2. We strongly recommend you back up the current configuration settings before resetting the extender.3. 11. 5. System LogWhen the extender does not work properly, you can save the system log and send it to the technical support for troubleshooting.Follow the steps below to save the system log:1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with the username and password you set for the extender.2. Go to System Tools > System Log.3. Choose the type and level of the system log according to your need.4. Click Save Log to save the system log to local.
31COPYRIGHT & TRADEMARKSSpecifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2017 TP-Link Technologies Co., Ltd. All rights reserved.
FCC STATEMENTThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/ TV technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:1 ) This device may not cause harmful interference.2 ) This device must accept any interference received, including interference that may cause undesired operation.Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”For product available in the USA/Canada market, only channel 1~11 can be operated. Selectionof other channels is not possible.For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible.Pour les produits disponibles aux états-Unis / Canada du marché, seul le canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas possible.
33CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.RF Exposure InformationThis device meets the EU requirements (1999/5/EC Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.The device complies with RF specifications when the device used at 20 cm from your body.Canadian Compliance StatementThis device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2. l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement. Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.Déclaration d’exposition aux radiations:Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.Industry Canada StatementCAN ICES-3 (B)/NMB-3(B)
34Korea Warning Statements:당해 무선설비는 운용중 전파혼신 가능성이 있음.NCC Notice & BSMI Notice:注意！ 依據 低功率電波輻射性電機管理辦法第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性或功能。第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通行；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機需忍受合法通信或工業、科學以及醫療用電波輻射性電機設備之干擾。安全諮詢及注意事項• 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。• 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。• 注意防潮，請勿將水或其他液體潑灑到本產品上。• 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。• 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
35Safety Information• When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source.• Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us.• Avoid water and wet locations.Explanation of the symbols on the product labelSymbol ExplanationClass II equipmentAC voltageRECYCLINGThis product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.Indoor use only

Navigation menu