TRENDNET TEW623PIV3 802.11n Wireless LAN PCI Adapter User Manual UG TEW 623PIv3

Download:
Mirror Download [FCC.gov]
Document ID	1016996
Application ID	bjxqP9ikVALsQA8y7fOQhA==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	69.02kB (862691 bits)
Date Submitted	2008-10-17 00:00:00
Date Available	2008-10-17 00:00:00
Creation Date	2008-10-16 16:32:40
Producing Software	AFPL Ghostscript 8.54
Document Lastmod	2008-10-17 10:20:05
Document Title	UG_TEW-623PIv3
Document Creator	PDFCreator Version 0.9.2
Document Author:	EmilyYang

Regulatory notes and statements
Wireless LAN, Health and Authorization for use
Radio frequency electromagnetic energy is emitted from Wireless LAN devices.
The energy levels of these emissions however are far much less than the
electromagnetic energy emissions from wireless devices like for example mobile
phones. Wireless LAN devices are safe for use frequency safety standards and
recommendations. The use of Wireless LAN devices may be restricted in some
situations or environments for example:
·On board of airplanes, or
·In an explosive environment, or
·In case the interference risk to other devices or services is perceived or identified
as harmful
In case the policy regarding the use of Wireless LAN devices in specific
organizations or environments (e.g. airports, hospitals, chemical/oil/gas industrial
plants, private buildings etc.) is not clear, please ask for authorization to use these
devices prior to operating the equipment.
Regulatory Information/disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with
the instructions included in the user documentation provided with the product. Any
changes or modifications made to this device that are not expressly approved by the
manufacturer may void the user’s authority to operate the equipment. The
Manufacturer is not responsible for any radio or television interference caused by
unauthorized modification of this device, of the substitution or attachment.
Manufacturer and its authorized resellers or distributors will assume no liability for
any damage or violation of government regulations arising from failing to comply
with these guidelines.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
The availability of some specific channels and/or operational frequency bands are
country dependent and are firmware programmed at the factory to match the
intended destination. The firmware setting is not accessible by the end user.
ii
Industry Canada statement:
This device complies with RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired
operation.
IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
This device has been designed to operate with an antenna having a maximum gain
of 2 dB. Antenna having a higher gain is strictly prohibited per regulations of
Industry Canada. The required antenna impedance is 50 ohms.
iii
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive
1999/5/EC. The following test methods have been applied in order to prove
presumption of conformity with the essential requirements of the R&TTE Directive
1999/5/EC:
EN 60 950-1: 2001 +A11: 2004
Safety of Information Technology Equipment
EN 50392: 2004
Generic standard to demonstrate the compliance of electronic and electrical
apparatus with the basic restrictions related to human exposure to electromagnetic
fields (0 Hz - 300 GHz)
EN 300 328 V1.6.1 (2004-11)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
transmission systems; Data transmission equipment operating in the 2,4 GHz ISM
band and using wide band modulation techniques; Harmonized EN covering
essential requirements under article 3.2 of the R&TTE Directive
EN 301 489-17 V1.6.1 (2005-08) and EN 301 489-1 V1.4.1 (2002-08)
Electromagnetic compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for 2,4 GHz wideband transmission systems and 5 GHz
high performance RLAN equipment
This device is a 2.4 GHz wideband transmission system (transceiver), intended for
use in all EU member states and EFTA countries, except in France and Italy where
restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities
in order to obtain authorization to use the device for setting up outdoor radio links
and/or for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in
some areas the RF output power may be limited to 10 mW EIRP in the frequency
range of 2454 – 2483.5 MHz. For detailed information the end-user should contact
the national spectrum authority in France.
0560
iv
[Czech]
Česky TRENDnet tímto prohlašuje, že tento TEW-623PI je ve shodě se základními požadavky a
dalšími příslušnými ustanoveními směrnice 1999/5/ES.
[Danish]
Dansk Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW-623PI overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch Hiermit erklärt TRENDnet, dass sich das Gerät TEW-623PI in Übereinstimmung mit den
[German]
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie
1999/5/EG befindet.
Eesti Käesolevaga kinnitab TRENDnet seadme TEW-623PI vastavust direktiivi 1999/5/EÜ
[Estonian]
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, TRENDnet, declares that this TEW-623PI is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Español Por medio de la presente TRENDnet declara que el TEW-623PI cumple con los requisitos
[Spanish]
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ TRENDnet ∆ΗΛΩΝΕΙ ΟΤΙ TEW-623PI ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ
[Greek]
ΤΙΣ ΟΥΣΙΩ∆ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ∆ΙΑΤΑΞΕΙΣ ΤΗΣ Ο∆ΗΓΙΑΣ
1999/5/ΕΚ.
Français Par la présente TRENDnet déclare que l'appareil TEW-63PI est conforme aux exigences
[French]
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano Con la presente TRENDnet dichiara che questo TEW-623PI è conforme ai requisiti essenziali ed
[Italian]
alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski Ar šo TRENDnet deklarē, ka TEW-623PI atbilst Direktīvas 1999/5/EK būtiskajām prasībām un
[Latvian]
citiem ar to saistītajiem noteikumiem.
Lietuvių Šiuo TRENDnet deklaruoja, kad šis TEW-623PI atitinka esminius reikalavimus ir kitas
[Lithuanian]
1999/5/EB Direktyvos nuostatas.
Nederlands Hierbij verklaart TRENDnet dat het toestel TEW-623PI in overeenstemming is met de essentiële
[Dutch]
eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
[Maltese]
Malti Hawnhekk, TRENDnet jiddikjara li dan TEW-623PI jikkonforma mal-ħtiāijiet essenzjali u ma
provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar Alulírott, TRENDnet nyilatkozom, hogy TEW-623PI megfelel a vonatkozó alapvetõ
[Hungarian]
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
[Polish]
Polski Niniejszym TRENDnet oświadcza, Ŝe TEW-623PI jest zgodny z zasadniczymi wymogami oraz
pozostałymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Português TRENDnet declara que este TEW-623PI está conforme com os requisitos essenciais e outras
[Portuguese]
disposições da Directiva 1999/5/CE.
Slovensko TRENDnet izjavlja, da je ta TEW-623PI v skladu z bistvenimi zahtevami in ostalimi
[Slovenian]
relevantnimi določili direktive 1999/5/ES.
Slovensky TRENDnet týmto vyhlasuje, že TEW-623PI spĺňa základné požiadavky a všetky príslušné
[Slovak]
ustanovenia Smernice 1999/5/ES.
Suomi TRENDnet vakuuttaa täten että TEW-623PI tyyppinen laite on direktiivin 1999/5/EY oleellisten
[Finnish]
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svenska Härmed intygar TRENDnet att denna TEW-623PI står I överensstämmelse med de väsentliga
[Swedish]
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Export restrictions
This product or software contains encryption code that may not be exported or
transferred from the US of Canada without an approved US Department of
Commerce export license.
Safety Information
Your device contains a low power transmitter. When device is transmitted it sends
out radio frequency (RF) signal.
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with minimum distance 20cm between
the radiator and your body. Use on the supplied antenna. Unauthorized antenna,
modification, or attachments could damage the transmitter and may violate FCC
regulations.
The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
Protection requirements for health and safety – Article 3.1a
Testing for electric safety according to EN 60950 has been conducted. These are
considered relevant and sufficient.
Protection requirements for electromagnetic compatibility – Article
3.1b
Testing for electromagnetic compatibility according to EN 301 489-1, EN 301 48917 and EN 55024 has been conducted. These are considered relevant and sufficient.
Effective use of the radio spectrum – Article 3.2
Testing for radio test suites according to EN 300 328-2 has been conducted. These
are considered relevant and sufficient.
CE in which Countries where the product may be used freely:
Germany, UK, Italy, Spain, Belgium, Netherlands, Portugal, Greece, Ireland,
Denmark, Luxembourg, Austria, Finland, Sweden, Norway and Iceland.
France: except the channel 10 through 13, law prohibits the use of other channels.
vi
TABLE OF CONTENT
Introduction................................................................................................1
Overview of this User’s Guide .................................................................................1
Unpacking and Setup .................................................................................2
Unpacking .................................................................................................................2
Setup..........................................................................................................................2
Hardware Installation .................................................................................3
LED Indicator for CardBus.......................................................................................3
LED Indicator for PCI ..............................................................................................3
Check the installation................................................................................................3
Software Installation ..................................................................................4
Windows 2000/XP/Vista Utility and Driver Installation .........................................4
Windows Wireless Utility Setting ............................................................................5
Technical Specifications .........................................................................................17
vii
INTRODUCTION
Congratulations on your purchase of this 300Mbps 802.11n Wireless LAN Adapter.
This manual contains detailed instructions regarding the operation of this product.
Please keep this manual for future reference.
With the 300Mbps 802.11n Wireless LAN Adapter, a desktop or laptop computer
can communicate with another computer wirelessly. An easy-to-use utility is
bundled with the 300Mbps 802.11n Wireless LAN Adapter for configuration,
monitoring, and diagnostic purposes.
The 300Mbps 802.11n Wireless LAN Adapter can wirelessly transmit and receive
data, at a speed of up to 300 megabits per second.
The 300Mbps 802.11n Wireless LAN Adapter provides users with access to realtime information anywhere in their organization. The mobility of the 300Mbps
802.11n Wireless LAN Adapter provides productivity and service, which are not
available under wired networks. The 300Mbps 802.11n Wireless LAN Adapter can
easily adapt from peer-to-peer networks, suitable for a small number of users, to
full infrastructure networks of thousands of users that allow roaming around a
broad area.
Overview of this User’s Guide
Introduction. Describes the 300Mbps 802.11n Wireless LAN Adapter and its
features.
Unpacking and Setup. Helps you get started with the basic installation of the
300Mbps 802.11n Wireless LAN Adapter.
Hardware Installation. Describes the LED indicator on the Adapter.
Software Installation. Describes how to setup the driver and the utility setting.
Technical Specifications. Lists the technical (general, physical and environmental)
specifications of the 300Mbps 802.11n Wireless LAN Adapter.
UNPACKING AND SETUP
This section provides unpacking and setup information for the 300Mbps 802.11n
Wireless LAN Adapter.
Unpacking
The box should contain the following items:
300Mbps 802.11n Wireless N PCI Adapter
CD-ROM (Utility/Driver and User’s Guide)
Multi-Language Quick Installation Guide
If any item is found missing or damaged, please contact your local reseller for
replacement.
Setup
Before installation, check the following:
 Make sure your computer is running at least a 300MHz or above processor with
256MB RAM or above
 Visually inspect the CardBus/PCI Adapter and make sure that it is fully plugged
in to the CardBus/PCI slot.
 The operating system on your computer must be the following: Windows 2000
(Service Pack 4), XP (Service Pack 2), Windows Vista
 A 802.11n or 802.11b/g access point or router.
 Make sure the environment has minimal interference and obstructions.
HARDWARE INSTALLATION
LED Indicator for CardBus
Link
The Link LED indicator lighted green when the 300Mbps Wireless N PCI Adapter
is connected to wireless network successfully.
ACT (Activity)
The ACT LED indicator blinking green when the 300Mbps Wireless N PCI
Adapter is transmitting or receiving data.
LED Indicator for PCI
Link
The Link LED indicator lighted green when the 300Mbps 802.11g Wireless LAN
Adapter is connected to wireless network successfully.
Check the installation
The LEDs of the Wireless LAN Adapter are clearly visible and the status of the
network link can be seen instantly:
1. Once the device is plugged to the station’s PCI slot, the LED of the Wireless
LAN Adapter will light up indicating a normal status.
2. When the device plugged to the station’s PCI slot and the driver was installed,
the ACT will start alternate blinking, it means that the device is starting to scan
the wireless devices near the Wireless LAN Adapter.
3. While the Wireless LAN Adapter linked up and transmitting data to the Access
Point or to other Wireless LAN station, the Link LED will lighted green.
SOFTWARE INSTALLATION
This section describes how to install the driver and utility for the 300Mbps Wireless
N PCI Adapter.
Note: DO NOT install the 300Mbps 802.11g Wireless LAN Adapter in the
computer until instructed to do so.
Windows 2000/XP/Vista Utility and Driver Installation
1) Insert the CD-ROM into your CD-ROM drive, the Autorun will appear.
2) Click “Install Utility & Driver” icon to install the driver and software and the
install wizard will begin installing the software. Follow the install wizard
instructions to complete the installation.
3) Follow the Install Shield Wizard Instructions. Click “Next” to continue and
finish it.
4) Once the utility is installed, turn off the PC, open the cover and install the
TEW-623PI adapter to the available PCI slot. Attach the antennas, close the
cover and boot up the PC again. The windows will detect new hardware and
install the appropriate driver automatically.
When the Wireless LAN Adapter was installed, you will see the icon on the
Windows task bar. The user can configure the wireless settings using the Wireless
Adapter Configuration Utility. Double-click the utility icon that appears in the
taskbar
When the icon in the toolbar represents in full green color then the signal strength
has an excellent performance with the AP, if it represents in yellow color then the
signal strength has a fair performance with the AP, and if the icon represents no
color, then the signal strength has a worst performance with the wireless station.
Windows Wireless Utility Setting
The user can configure the wireless settings using the Wireless Adapter
Configuration Utility. Double-click the utility icon that appears in the taskbar.
Link Information
This is the default screen after launching the Utility program.
Status: Shows the associated BSSID, which can be used to identify the wireless
access point.
SSID: Shows the current SSID, which must be the same on the wireless client and
AP in order for communication to be established.
Wireless Mode: Shows the current wireless mode used for wireless communication.
Encryption: Shows the current encryption mode used on the wireless network.
TxRate: Shows the current data rate used for transmitting.
Channel: Shows the current channel for communication.
Signal Strength of Percentage: Shows the wireless signal strength of the
connection between the Wireless LAN Adapter with the Access Point.
Tx/Rx: Shows the statistics of data transfer, and the calculation is based on the
number of packets transmitted and received. It also shows the link quality of the
Wireless LAN Adapter with the Access Point when operating under Infrastructure
mode.
Configuration
This screen is where you set the basic wireless settings for the Wireless LAN
Adapter
SSID: Service Set Identifier, which is a unique name shared among all clients in a
wireless network. The SSID must be identical for each client in the wireless
network.
Wireless Mode: There are two modes available for selection
● Infrastructure – to establish wireless communication with the LAN and other
wireless clients through the use of Access Points.
● Ad-Hoc – to establish point-to-point wireless communication directly with
other wireless client devices.
Authentication: The following options are available: Open System, Shared Key,
WPAPSK, WPA2-PSK, WPA EAP-TLS, WPA2 EPA-TLS and WPA2-PSK.
Select Open System, Shared Key for WEP data encryption feature.
Open or Shared Key
Open System and Shared Key requires the user to set a WEP key to exchange
data with other wireless clients that have the same WEP key.
 Default Key: select one of the 4 keys to use.
 Network Key: choose the encryption way, either in HEX or ASCII formats,
and enter the password in the blank space.
 Key Length: select 64 or 128 bits as the length of the keys
Key Format: HEX or ASCII
WPA-PSK/WPA2-PSK
If WPA-PSK/WPA2-PSK is selected the below window appears. Please enter a
WPA Passphrase.
WPA-PSK/WPA2-PSK
If WPA/WPA2 is selected, configuration is enabled. Please click the
“configuration” button. Select a certification for drop down list.
Site Survey
This screen allows the user to scan for available wireless networks (wireless clients
and Access Points). It also allows the user to establish wireless communications
with an available wireless network.
Available Network – displays the wireless networks (wireless clients and access
points) that are within range.
Select any one of the wireless networks by double-clicking on it or clicking on the
“Connect” button.
Click the “Refresh” button to scan for available networks.
10
Profile
Profile – The user can create and manage the created profiles for home, work or
public areas. By double-clicking on one of the created profile, the setting will adjust
to the specific setting such as SSID, channel, and encryption as saved by that
particular profile.
Remove: Deletes the selected profile
Add: Adds a profile. The following screen will appear. The user can enter the
necessary information required for accessing Access Points or Wireless Router
Connect: The current connected profile information.
11
WPS
WiFi Protected Setup (WPS) is an optional certification program from the Wi-Fi
Alliance that is designed to ease the task of setting up and configuring security on a
wireless network. There are two methods used in the WPS as below instruction.
Push the button on my access point
Using the WPS configuration with the “Push the button on my access point”
method, the configuration steps as below:
1) Selected the “Push the button on my access point”.
2) Push the WPS configuration button on your wireless access point or router.
3) Cliek the Next button start the WPS configuration.
12
4) If the WPS configuration was successful, the follow window will show on.
5) If the WPS configuration was failed, the follow window will show on.
13
Enter a PIN into my access point
Using the WPS configuration with the “Enter a PIN into my access point” method,
the configuration steps as below:
1) Selected the “Enter a PIN into my access point”, the PIN will be show on the
button of the windows.
2) Enter the PIN code into the WPS “Clint PIN number” of you wireless access
point or router then click the Start PIN button, the wireless access point or
router will start the WPS configuration process.
3) Selected a wireless access point or router which one will be connecting then
click the Next button start the WPS configuration. If the “Automatically select
the network” was checked, the setup step will be skip.
4) If the WPS configuration was successful, the follow window will show on.
5) If the WPS configuration was failed, the follow window will show on.
About
This screen displays information about the Wireless LAN Adapter, such as the
Driver and Utility version. When a new version of the utility becomes available for
upgrade, users will be able to identify by version numbers.
Technical Specifications
General
Radio Technology
IEEE 802.11b Direct Sequence Spread Spectrum (DSSS)
IEEE 802.11g Orthogonal Frequency Division Multiplexing (OFDM)
IEEE 802.11n draft 2.0 Orthogonal Frequency Division Multiplexing (OFDM)
Interface
PC Card: 32-bit CardBus, PCI Adapter: 32-bit PCI bus
Data Transfer Rate
802.11b: 11Mbps, 5.5Mbps, 2Mbps, and 1Mbps
802.11g: 54Mbps, 48Mbps, 36Mbps, 24Mbps, 18Mbps, 12Mbps, 9Mbps and
6Mbps
802.11n: up to 300Mbps
Receiver Sensitivity
300Mbps: Typical -65dBm @ 10% PER (Packet Error Rate)
54Mbps: Typical -72dBm @ 10% PER (Packet Error Rate)
11Mbps: Typical -86dBm @ 8% PER (Packet Error Rate)
Transmit Power
20dBm
Frequency Range
2412 ~ 2484 MHz ISM band (channels 1 ~ 13)
2400~2483.5MHz ISM band (channels 1 ~ 11)
Modulation Schemes
DBPSK/DQPSK/CCK/OFDM
Channels
1~11 channels (FCC), 1~13 channels (ETSI)
Media Access Protocol
CSMA/CA with ACK
Security
64/128-bits WEP Encryption, WPA-PSK, WPA2-PSK, WPA, WPA2
PC Card: Link, ACT
Diagnostic LED
PCI Adapter: Link
PC Card: Integrated printed dual diversity antennas
Antenna
PCI: 3 x 2dBi dipole antenna
Physical and Environmental
Driver Support
Windows 2000, Windows XP (32/64-bit), Windows Vista (32/64-bit)
Temperature
Operating: 0° ~ 40° C, Storage: -10° ~ 70° C
Humidity
10% ~ 95% RH, no condensation
Dimensions
PC Card:, 115 x 54 x 8.7 mm, PCI Adapter: 13 x 121 x 21.6
Certifications
FCC Part 15.247 for US, ETS 300 328 for Europe,
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under normal use and
service, for the following lengths of time from the date of purchase.
TEW-623PI – 5 Years Limited Warranty
If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall,
at its option and expense, repair the defective product or deliver to customer an equivalent product to
replace the defective item. All products that are replaced will become the property of TRENDnet.
Replacement products may be new or reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory data of customer
contained in, stored on, or integrated with any products returned to TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to service the product
through any unauthorized service center. This warranty is voided if (i) the product has been modified or
repaired by any unauthorized service center, (ii) the product was subject to accident, abuse, or improper
use (iii) the product was subject to conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable warranty period
for a Return Material Authorization (RMA) number, accompanied by a copy of the dated proof of the
purchase. Products returned to TRENDnet must be pre-authorized by TRENDnet with RMA number
marked on the outside of the package, and sent prepaid, insured and packaged appropriately for safe
shipment.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED
ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR
REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN
LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY
OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET NEITHER
ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE OR USE OF TRENDNET’S
PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION
DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED
BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION OR
TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND
THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO EXCLUDES
FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR
IN CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE,
FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID, AT
TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED
IF ANY REMEDY PROVIDED HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of California.
Note: AC/DC Power Adapter, Cooling Fan, Cables, and Power Supply carry 1-Year Warranty


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print
XMP Toolkit                     : 3.1-701
About                           : 94546933-9db8-11dd-0000-74038ffdc494
Producer                        : AFPL Ghostscript 8.54
Modify Date                     : 2008:10:17 10:20:05+08:00
Create Date                     : 2008:10:16 16:32:40+08:00
Creator Tool                    : PDFCreator Version 0.9.2
Metadata Date                   : 2008:10:17 10:20:05+08:00
Document ID                     : 94546933-9db8-11dd-0000-74038ffdc494
Instance ID                     : uuid:769df4f9-80c2-4057-b263-fc5b51459723
Format                          : application/pdf
Title                           : UG_TEW-623PIv3
Creator                         : EmilyYang
Page Count                      : 29
Author                          : EmilyYang

EXIF Metadata provided by EXIF.tools