TRENDNET TEW721BRM N150 Wireless ADSL 2+ Modem Router User Manual test 3

TRENDNET, Inc. N150 Wireless ADSL 2+ Modem Router test 3

Users Manual.PDF

Download: TRENDNET TEW721BRM N150 Wireless ADSL 2+ Modem Router User Manual test 3
Mirror Download [FCC.gov]TRENDNET TEW721BRM N150 Wireless ADSL 2+ Modem Router User Manual test 3
Document ID2398737
Application IDEHwGuFgkGaD7ZHzmFXRwiA==
Document DescriptionUsers Manual.PDF
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize180.4kB (2255040 bits)
Date Submitted2014-09-23 00:00:00
Date Available2014-09-23 00:00:00
Creation Date2014-09-14 13:09:42
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2014-09-19 13:08:10
Document Titletest 3
Document CreatorMicrosoft® Word 2013
Document Author: Jonathan

TRENDnet User’s Guide
Cover Page
TRENDnet User’s Guide
Contents
Product Overview ...........................................................................1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Application Diagram ...................................................................................................... 4
Basic Router Setup ..........................................................................5
Creating a Home Network ............................................................................................. 5
Router Installation ......................................................................................................... 6
Connect additional wired devices to your network ..................................................... 10
Wireless Networking and Security ................................................. 10
How to choose the type of security for your wireless network .................................. 10
Secure your wireless network ..................................................................................... 11
Connect wireless devices to your router ..................................................................... 13
Connect wireless devices using WPS ........................................................................... 13
Basic wireless settings ................................................................................................. 14
Guest Network ............................................................................................................. 15
Steps to improve wireless connectivity ....................................................................... 16
Advanced wireless settings .......................................................................................... 17
Multiple SSID ........................................................................................................... 17
Additional Wireless Settings ................................................................................... 17
Access Control Filters .................................................................... 18
Table of Contents
Domain Filters ......................................................................................................... 19
IP Filtering ............................................................................................................... 20
Packet Filters ............................................................................................................... 20
Advanced Router Setup ................................................................ 22
Access your router management page ........................................................................ 22
Change your router login password ............................................................................ 23
Set your router date and time ..................................................................................... 23
Manually configure your Internet connection ............................................................ 24
Change your router IP address .................................................................................... 28
Set up the DHCP server on your router ....................................................................... 29
Enable/disable UPnP on your router ........................................................................... 30
Allow/deny VPN connections through your router ..................................................... 30
Configure ALG settings ................................................................................................ 31
Additional Security Settings ......................................................................................... 31
Allow/deny multicast streaming.................................................................................. 32
Identify your network on the Internet ........................................................................ 33
Allow remote access to your router management page ............................................. 34
Configure remote access rules .................................................................................... 34
Configure the router’s Ethernet port settings ............................................................. 35
Open a device on your network to the Internet .......................................................... 35
DMZ ......................................................................................................................... 35
Virtual Server .......................................................................................................... 36
Port Trigger ............................................................................................................. 37
Prioritize traffic using QoS (Quality of Service) ........................................................... 38
Access control basics ................................................................................................... 18
Create schedules ......................................................................................................... 39
Wireless MAC address filters .................................................................................. 18
Add static routes to your router .................................................................................. 39
MAC address filters ................................................................................................. 19
Enable dynamic routing on your router ...................................................................... 40
URL/Keyword Blocking ............................................................................................ 19
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
Setup Port Mapping ..................................................................................................... 41
Check the router DSL Statistics .................................................................................... 50
Setup IPv6 on your router ........................................................................................... 41
View your router log .................................................................................................... 51
Configure ADSL settings ............................................................................................... 42
View your router traffic ............................................................................................... 51
Router Maintenance & Monitoring................................................ 42
Configure your router log ............................................................................................ 52
Reset your router to factory defaults .......................................................................... 42
Enable SNMP on your router ....................................................................................... 53
Router Default Settings ............................................................................................... 43
Enable TR-069 on your router ..................................................................................... 54
Backup and restore your router configuration settings .............................................. 44
Troubleshooting ........................................................................... 55
Restart your router ...................................................................................................... 46
Appendix ...................................................................................... 56
Check connectivity using the router management page ............................................. 46
Manage Initialization Scripts ....................................................................................... 46
Check Internet connectivity using the router management page ............................... 47
Check the router system information .......................................................................... 47
Check the router IPv6 status........................................................................................ 49
Check the router IPv6 status........................................................................................ 49
Check the router Wireless clients ................................................................................ 49
Check the router LAN clients ....................................................................................... 50
Check the router Routing Table ................................................................................... 50
Check the router Basic Statistics.................................................................................. 50
© Copyright 2014 TRENDnet. All Rights Reserved.
ii
TEW-721BRM
TRENDnet User’s Guide
Features
Product Overview
TRENDnet’s N150 Wireless ADSL 2+ Modem Router, model TEW-721BRM, is a
combination high performance modem for Internet access and reliable wireless N150
router—well suited for small to medium size homes. The modem is compatible with
most ADSL Internet service provider networks and it comes with an intuitive guided
setup wizard. For your convenience the wireless network is setup and pre-encrypted out
of the box.
Features
TEW-721BRM
Package Contents
In addition to your router, the package includes:
 Multi-Language Quick Installation Guide
 CD-ROM (User’s Guide)
 Network cable (1.5m / 5ft.)
 RJ-11 telephone cable (1.8m / 5ft.)
 Power adapter (12V DC, 0.5A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Easy Setup
Get up and running in minutes with the intuitive guided setup
Internet Service
Compatible with most ADSL 2/2+ internet service provider networks
IPv6
IPv6 network support
N150 Wireless
Reliable 150 Mbps Wireless N
Pre-Encrypted Wireless
For your convenience the wireless network arrives pre-encrypted with its own unique
password
Guest Network
Create an isolated network for guest internet access only
Wireless On/Off Button
Enable or disable the wireless network with the convenient on/off wireless button
One Touch Connection
Connect to the router at the touch of the Wi-Fi Protected Setup (WPS) button
Parental Controls
Control access to specific websites and manage which devices can access the router
Advanced QoS
Classify and prioritize different types of data such as video and audio transmissions
Energy Savings
Embedded GREENnet technology reduces power consumption by up to 50%
Ethernet Ports
Four Ethernet ports to hardwire devices
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-721BRM
TRENDnet User’s Guide
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
Product Hardware Features
Rear View
LAN
Ports
Reset
Button
Power
Port
ADSL
WAN Port
 On/Off Power Button: Push to power on or off router.
 Power Port: Connect the included power adapter from your modem router power
port and to an available power outlet.
Note: Use only the adapter that came with your router.
 LAN Ports: Connect Network cables (also called network cables) from your modem
router LAN ports to your wired network devices.
 ADSL WAN Port (RJ-11 telephone port): Connect an RJ-11 telephone cable from
your modem router ADSL WAN port to your telephone jack/DSL line.
 Reset Button: Push and hold this button for 10 seconds and release to reset your
router to its factory defaults.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-721BRM
TRENDnet User’s Guide
Front View
WLAN On/Off
Button
WPS
Butto
Diagnostic LEDs
o LAN 1-4 (Link/Activity) LEDs – These LED indicators are solid green when the LAN
ports are successfully connected to your wired network devices (which are turned
on). These LED indicators will blink green while data is transmitted or received
through your modem router’s LAN ports.
o Wireless WLAN (Link/Activity) LED: This LED indicator is solid green when the
wireless is “On” and functioning properly on your modem router. This LED
indicator will be blinking while data is transmitted or received by your wireless
clients or wireless network devices connected to your modem router. This LED
indicator will be off when the wireless functionality of your modem router is
disabled.
o ADSL WAN (Link/Activity) LED: This LED indicator is blinking green when the
ADSL status of the modem router is ready to establish connection to your ISP. The
LED indicator will turn solid green when the modem router has been properly
configured with the settings provided by your ISP and successful ADSL connection
has been made to your ISP. This LED indicator will be blink while data is
transmitted or received through the ADSL port of your modem router.
o Internet: This LED Indicator is solid green with valid internet connection. The LD
indicator blinks green during data transmission. If the indicator is red, this
indicates invalid internet connection.
o WPS LED: This LED indicator blinks green when WPS is activated. The LED will
stop blinking and remain solid when WPS is completed. When the indicator blinks
red it indicates there was no WPS device connected.
 WLAN On/Off: Press button to turn off or on wireless network.
 WPS Button: Push button to activate WPS (WiFi Protected Setup) push and hold
this button for 3 seconds and release to activate WPS. Within 2 minutes, push and
hold the WPS button on your wireless client device. WLAN LED indicator will blink
rapidly to indicate that WPS has been activated.
 Diagnostic LEDs:
o Power LED: This LED indicator is blinks green when properly connected to a
power supply. When the device is malfunctioned LED indicator will be red.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-721BRM
Application Diagram
The router is installed near the wall telephone jack/DSL line (DSL service supplied by your ISP “Internet Service Provider”) which connects to the Internet. Wireless signals from the router
are broadcasted to wireless clients such as laptops (with wireless capability) thereby providing Internet access.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-721BRM
TRENDnet User’s Guide
Basic Router Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
 Modem: Connects a computer or router to the Internet or ISP (Internet Service
Provider).
Note: The TEW-721BRM is a combination DSL modem and router, therefore, you do
not require a separate DSL modem from your ISP when setting up this product.
 Router: Connects multiple devices to the Internet.
 Switch: Connect several wired network devices to your home network. Your router
has a built-in network switch (the LAN port 1-4). If you have more wired network
devices than available Network ports on your router, you will need an additional
switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
 Computers/devices with a Network port or wireless networking capabilities.
 A modem and Internet service to your home, provided by your ISP (modem typically
supplied by your ISP).
 A router to connect multiple devices to the Internet.
2. Set up your router. See “How to setup your router” below.
3. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 11.
4. To set up wireless networking on your router, see “Wireless Networking and Security”
on page 11.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 6 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:

http://www.trendnet.com/support
(documents, downloads, and FAQs are available from this Web page))
© Copyright 2014 TRENDnet. All Rights Reserved.
TEW-721BRM
TRENDnet User’s Guide
Router Installation
Before you Install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process,
come back to this page and contact your ISP to verify required ISP specification fields
listed below.
General ADSL Parameters
VCI: ____
VPI: ____
MTU: ________
Data Encapsulation (LLC/VCMux) : _________
Schedule Type (UBR/CBR/VBR/GFR): _______
VLAN Tag (If required by your ISP): _________
ADSL Connection Types:
1. Ethernet over ATM (RFC 1483 Bridged) with NAT
 1a. Obtain IP Address Automatically (Dynamic IP Address)
Host Name (Optional) ______________________
ISP registered Mac Address or Clone MAC address (Optional)___:___:___:___:___:___
 1b. Fixed IP address (Static IP Address)
WAN IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
WAN Subnet Mask: _____. _____._____._____
WAN Gateway IP Address: _____. _____._____._____
Primary DNS Server Address: _____. _____._____._____
Secondary DNS Server Address: _____. _____._____._____
WAN IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
WAN Subnet Mask: _____. _____._____._____
WAN Gateway IP Address: _____. _____._____._____
Primary DNS Server Address: _____. _____._____._____
Secondary DNS Server Address: _____. _____._____._____
3. PPP over ATM (PPPoE)
 3a. PPPoE to obtain IP automatically
Account/User Name: _________
Password: ________________
 3b. PPPoE with a fixed IP address
User Name: _________
Password: ________________
Verify Password: ________________
IP Address: ____. _____._____._____ (e.g. 215.24.24.129)
Primary DNS Server Address: _____. _____._____._____
Secondary DNS Server Address: _____. _____._____._____
4. PPP over Ethernet (PPPoA)
 4a. PPPoA to obtain IP automatically
Account/User Name: _________
Password: ________________
 4b. PPPoA with a fixed IP address
User Name: _________
Password: ________________
Verify Password: ________________
IP Address: ____. _____._____._____ (e.g. 215.24.24.129)
Primary DNS Server Address: _____. _____._____._____
Secondary DNS Server Address: _____. _____._____._____
2. IP over ATM (RFC 1483 Routed)
 2a. Obtain IP Address Automatically (Dynamic IP Address)
Host Name (Optional) ______________________
ISP registered Mac Address or Clone MAC address (Optional)___:___:___:___:___:___

2b . Fixed IP address (Static IP Address)
© Copyright 2014 TRENDnet. All Rights Reserved.
TEW-721BRM
TRENDnet User’s Guide
Hardware Installation
1. Connect the detachable antenna to your modem router.
2. Connect one end of the RJ-11 telephone cable to the modem router ADSL port.
Connect the other end of the RJ-11 telephone cable to the telephone jack/DSL line.
3. Using the Network cable, connect your computer to one of the four LAN ports on the
modem router.
4. Connect the power adapter to the modem router and then to a power outlet.
5. Verify that the status LED indicators on the front of the modem to confirm the device
is fully functional: Status (Green), ADSL (Green), WLAN (Green) and the LAN port
(1,2,3,4) (Green) your computer is connected.
Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera)
and go to http://192.168.10.1. Your router will prompt you for a user name and
password.
2. Your router will prompt you for a user name and password. For added security, the
router is preconfigured with a unique password. You can find the Password on a
sticker on the side of the router and on the label on the bottom of the router.
3. Enter your Username and Password, select your preferred language, and then click
Login.
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-721BRM
3. The Setup Wizard will automatically appear. This section determines what method
the router will use to interface with your ISP service. Select the ADSL Internet
connection type provided by your ISP and click Next.
Note: If the Setup Wizard does not automatically appear, click Setup Wizard (the
top button on the left tab).
6. The following screen will appear next, depending the ADSL connection type you
selected, you may need to enter additional information such as your PPPoE/PPPoA
user name and password information provided by your ISP static IP. Enter any
additional information required by your ISP for your ADSL connection and click Next.
Note: It is strongly recommended to contact your ISP to verify all required settings
for one of the options listed on page 6. The options listed on page 6 match the
settings options available to choose from
4. The Setup Wizard can automatically detect your VPI/VCI and Data Encapsulation
settings of your ADSL connection. Select Auto-detect and click Next.
Note: If you encounter any issues with the Auto-Detect feature on the wizard, you
can click “Skip Scan”, and configure your ADSL connection settings manually.
5. Once the wizard detects your VPI/VCI settings you can verify if the values are correct
and click Next to continue.
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
7. The Summary page will allow you to quickly review the settings you applied in the
Setup Wizard. Click Save to apply settings.
TEW-721BRM
10. For added security, the router is pre-encrypted with its own unique wireless
network security key. You can find the unique network security key and pre-assigned
network name (SSID) on a sticker on the front of the router and on a label on the
bottom of the router. If you would like to change the wireless settings, continue to
the next page to launch the wireless setup wizard.
8. Wait for your modem router to apply the settings.
9. Click Finish to return to the router management page.
Note: If you cannot access the Internet, please verify your hardware connections
and LED status and re-run the Setup Wizard to verify you have applied the correct
settings.
© Copyright 2014 TRENDnet. All Rights Reserved.
TEW-721BRM
TRENDnet User’s Guide
Connect additional wired devices to your network
Wireless Networking and Security
You can connect additional computers or other network enabled devices to your
network by using Network cables. Connect them to one of the available LAN ports
labeled 1,2,3,4 on your modem router. Check the status of the LED indicators (1, 2, 3, or
4) on the front panel of your router to ensure the physical cable connection from your
computer or device.
How to choose the type of security for your wireless network
Note: If you encounter issues connecting to your network, there may be a problem with
your computer or device network settings. Please ensure that your computer or device
network settings (also called TCP/IP settings) are configured to obtain IP address
settings automatically (also called dynamic IP address or DHCP) and to Obtain DNS
Server address settings automatically.
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on
your new router.
There are a few different wireless security types supported in wireless networking each
having its own characteristics which may be more suitable for your wireless network
taking into consideration compatibility, performance, as well as the security strength
along with using older wireless networking hardware (also called legacy hardware).
It is strongly recommended to enable wireless security to prevent unwanted users from
accessing your network and network resources (personal documents, media, etc.).
In general, it is recommended that you choose the security type with the highest
strength and performance supported by the wireless computers and devices in your
network. Please review the security types to determine which one you should use for
your network.
Wireless Encryption Types
 WEP: Legacy encryption method supported by older 802.11b/g hardware. This is
the oldest and least secure type of wireless encryption. It is generally not
recommended to use this encryption standard, however if you have old 802.11 b or
802.11g wireless adapters or computers with old embedded wireless cards(wireless
clients), you may have to set your router to WEP to allow the old adapters to
connect to the router. Note: This encryption standard will limit connection speeds
to 54Mbps.
 WPA: This encryption is significantly more robust than the WEP technology. Much
of the older 802.11g hardware was been upgraded (with firmware/driver upgrades)
to support this encryption standard. Total wireless speeds under this encryption
type however are limited to 54Mbps.
 WPA / WPA2: This setting provides the router with the ability to detect wireless
devices using either WPA or WPA2 encryption. Your wireless network will
automatically change the encryption setting based on the first wireless device
connected. For example, if the first wireless client that connects to your wireless
© Copyright 2014 TRENDnet. All Rights Reserved.
10
TEW-721BRM
TRENDnet User’s Guide
network uses WPA encryption your wireless network will use WPA encryption. Only
when all wireless clients disconnect to the network and a wireless client with WPA2
encryption connects your wireless network will then change to WPA2 encryption.
NOTE: WPA2 encryption supports 802.11n speeds and WPA encryption will limit
your connection speeds to 54Mbps
 WPA2: This is the most secure wireless encryption available today, similar to WPA
encryption but more robust. This encryption standard also supports the highest
connection speeds. TRENDnet recommends setting your router to this encryption
standard. If you find that one of your wireless network devices does not support
WPA2 encryption, then set your router to either WPA or WPA-Auto encryption.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported.Below is brief
comparison chart of the wireless security types and the recommended
configuration depending on which type you choose for your wireless network.
Security Standard
Compatible
Wireless
Standards
Highest
Performance
Under This
Setting
Encryption
Strength
Additional
Options
Recommended
Configuration
WEP
IEEE 802.11a/b/g/n
(802.11n devices
will operate at
802.11g speeds)
WPA
IEEE 802.11a/b/g/n
(802.11n devices
will operate at
802.11g speeds)
IEEE 802.11a/b/g/n
Up to 54Mbps
Up to 54Mbps
Up to 450Mbps*
Low
Open System or
Shared Key,
HEX or ASCII,
Different key sizes
Medium
High
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
Open System ASCII
13 characters
Secure your wireless network
Setup > Wireless Settings
After you have determined which security type to use for your wireless network (see
“How to choose the security type for your wireless network” on page 12), you can set
up wireless security.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Wireless Settings.
3. Click on the Security Mode drop-down list to select your wireless security type.
WPA2
Selecting WEP:
If selecting WEP (Wired Equivalent Privacy), please review the WEP settings to
configure and click Apply to save the changes.
*Dependent on the maximum 802.11n data rate supported by the device (150Mbps,
300Mbps, or 450Mbps)
 Authentication Type: Choose Open, Shared, or Auto.
© Copyright 2014 TRENDnet. All Rights Reserved.
11
TEW-721BRM
TRENDnet User’s Guide
Note: It is recommended to use Open System because it is known to be more secure
than Shared Key.
 WEP Key 1-4
o Choose HEX or ASCII.
Note: It is recommended to use ASCII because of the much larger character set
that can be used to create the key.
o This is where you enter the password or key needed for a computer to connect
to the router wirelessly
o You can define up to 4 passwords or 4 keys. Only one key can be active at a given
time. Most users simply define one key.
o Choose a key index 1, 2, 3, or 4 and enter the key.
o When connecting to the router, the client must match both the password and
the Key number. (e.g. if you have activated Key 2 with a password of 12345, then
the client must select: Key 2 (entering Key 1, 3, or 4 will block the ability to
connect) and enter password 12345)
Selecting WPA-PSK, WPA-PSK / WPA2-PSK, or WPA2-PSK (WPA2-PSK recommended):
If selecting WPA-PSK, WPA-PSK / WPA2-PSK, or WPA2-PSK, (Wi-Fi Protected Access
Preshared Key) please review the settings to configure and click Apply to save the
changes.
Create your Wireless security preshared key (password or key):
 Preshare Key: Enter the preshared key.
o This is the password or key that is used to connect your computer to this router
wirelessly
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
Then from the PSK/EAP row, select either PSK or EAP
 PSK stands for Preshared Key
 EAP stands for Extensive Authentication Protocol, also called Remote Authentication
Dial-In User Service or RADIUS).
Note: EAP requires an external RADIUS server, PSK only requires you to create a
passphrase.
Selecting WPA, WPA / WPA2, or WPA2:
If selecting WPA, WPA / WPA2, or WPA2 (Wi-Fi Protected Access Extensible
Authentication Protocol) please review the settings to configure and click Apply to save
WEP Key Format
HEX
ASCII
Character set
0-9 & A-F, a-f only
Alphanumeric (a,b,C,?,*, /,1,2, etc.)
64-bit key length
10 characters
5 characters
128-bit key length
26 characters
13 characters
the changes.
EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In
User Service or RADIUS.
Select the Encryption Type
o When selecting WPA security, it is recommended to use TKIP.
o When selecting WPA / WPA2 security, it is recommended to use AES.
o When selecting WPA2 security, it is recommended to use AES.
First, from the Security Mode drop-down list, select WPA-PSK, WPA-PSK / WPA2-PSK,
or WPA2-PSK.
o Select the Encryption type. When selecting WPA-PSK security, it is recommended
to use TKIP.
o When selecting WPA-PSK / WPA2-PSK security, it is recommended to use AES.
o When selecting WPA2-PSK security, it is recommended to use AES.
© Copyright 2014 TRENDnet. All Rights Reserved.
12
TEW-721BRM
TRENDnet User’s Guide
Connect wireless devices using WPS
Setup > Wireless Settings > WPS Setup
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
wireless network. If your wireless devices support WPS, you can use this feature to
easily add wireless devices to your network.
Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled.
There are two methods the WPS feature can easily connect your wireless devices to
your network.
o RADIUS Server IP: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)
o RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS
authentication.
Note: It is recommended to use port 1812.
o RADIUS Shared Key: Enter the shared key (or shared secret) used to authorize your
router with your RADIUS server.
Connect wireless devices to your router
A variety of wireless network devices can connect to your wireless network such as:
 Gaming Consoles
 Internet enabled TVs
 Network media players
 Smart Phones
 Wireless Laptop computers
 Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this router’s wireless
network.
 Push Button Configuration (PBC) method
o RECOMMENDED Hardware Push Button method–with an external button located
physically on your router and on your client device
o WPS Software/Virtual Push Button - located in router management page
 PIN (Personal Identification Number) Method - located in router management page
Note: Refer to your wireless device documentation for details on the operation of
WPS.
Recommended Hardware Push Button (PBC) Method
Note: it is recommended that a wireless key (passphrase or password) is created
before connecting clients using the PBC method. If no wireless key is defined when
connecting via PBC, the router will automatically create an encryption key that is 64
characters long. This 64 character key will then have to be used if one has to
connect computers to the router using the traditional connection method.
To add a wireless device to your network, simply push the WPS button on the wireless
device you are connecting(consult client device User’s Guide for length of time), then
push and hold the WPS button located on your router for 3 seconds and release it. The
WLAN LED on your modem router will flash rapidly indicating that the WPS setup
process has been activated. (See “Product Hardware Features” on page 2)
For connecting additional WPS supported devices, repeat this process for each
additional device.
See the “Appendix” on page 59 for general information on connecting to a wireless
network.
© Copyright 2014 TRENDnet. All Rights Reserved.
13
TEW-721BRM
TRENDnet User’s Guide
PBC (Software/Virtual Push Button)
Setup > Wireless Settings > WPS Setup
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup and click Wireless Settings, then click on the WPS Setup button at the
bottom of the page.
3. To add a wireless device to your network, simply the push the WPS button on the
wireless device (consult wireless device’s User’s Guide for length of time), you are
connecting, then in your router management page, make sure the Config Method is
set to Push Button (default setting) and click on the Trigger button at the bottom of
the page.
4. The WPS Status area will display status messages about the WPS process.
5. The WPS Status area will display “Configured” message to indicate that the wireless
client device successfully connected using WPS.
4. Click the Config Method drop-down list and select PIN Code. Click Apply.
5. In the empty field, enter the 8-digit WPS PIN of the wireless client device you are
connecting and click Trigger.
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.
6. The WPS Status area will display “Configured” message to indicate that the wireless
client device successfully connected using WPS.
Basic wireless settings
PIN (Personal Identification Number)
Setup > Wireless Settings > WPS Setup
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup and click Wireless Settings, then click on the WPS Setup button at the
bottom of the page.
3. Next to Config Status, click Release. The status will change to Unconfigured.
Setup > Wireless Settings
This section outlines available management options under the Wireless Settings tab.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Wireless Settings.
3. To save changes to this section, click Apply when finished.
© Copyright 2014 TRENDnet. All Rights Reserved.
14
TEW-721BRM
TRENDnet User’s Guide
o B only: This mode only allows devices to connect to the router using older and slow
802.11b technology (typically not recommended).
Note: Please check the specifications on your wireless devices for the highest
wireless capability supported first before applying these settings. If you are unsure,
it is recommended that you keep the default setting (B/G/N mixed) for the best
compatibility.
 Device
o Enable turns on the wireless networking on your router (by default it is enabled).
o Disable turns off wireless networking on your router.
Note: It is recommended to leave the wireless setting to Enable unless you do not
plan on connecting any wireless computers or devices to your network.
 SSID: This acronym stands for Service Set Identifier and is the name of your wireless
network. It differentiates your wireless network from others around you. By default,
the router broadcast TRENDnet721as the wireless network name. If you choose to
change the SSID, change it to a name that you can easily remember.
 Wireless Channel: In North America, this router can broadcast on 1 of 11 Channels
(13 in Europe and other countries). Selecting the Auto option enables the router to
automatically select the best Channel for wireless communication. To manually set
the channel on which the router will broadcast, click the drop-down list and select
the desired Channel for wireless communication. The goal is to select the Channel
that is least used by neighboring wireless networks.
 Wireless Mode: Select the appropriate mode for your network.
o B/G/N mixed: Select this mode for the best compatibility. This mode allows older
802.11b and 802.11g wireless devices to connect to the router in addition to newer
802.11n devices.
o B/G mixed: This mode only allows devices to connect to the router using older and
slow 802.11b or 802.11g technology and it thereby reduces the router’s maximum
speed to 54Mbps (typically not recommended).
o N only: This mode only allows newer 802.11n devices to connect to your router.
This mode does ensure the highest speed and security for your network, however if
you have older 802.11g wireless clients, they will no longer be able to connect to
this router.
o G only: This mode only allows devices to connect to the router using older and
slow 802.11g technology (typically not recommended).
When applying the 802.11 mode setting, please keep in mind the following:
 Wireless devices that support 802.11n are backwards compatible and can connect
wirelessly at 802.11g or 802.11b.
 Connecting at 802.11b or 802.11g will limit the capability of your 802.11n supported
wireless devices from obtaining higher performance and data rates.
 Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11n.
 Wireless devices that only support 802.11b or 802.11g will not be able to connect to
a wireless network that is set to 802.11n only mode.
 Wireless devices that only support 802.11b will not be able to connect to a wireless
network that is set to 802.11g only mode.
Guest Network
Setup > Wireless Settings
This section outlines available management options under the Wireless Settings tab.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Guest Network.
3. To save changes to this section, click Apply when finished.
© Copyright 2014 TRENDnet. All Rights Reserved.
15
TEW-721BRM
TRENDnet User’s Guide
 Radio On/Off: Select to enable wireless guest network.
 Name (SSID): Enter the wireless name or SSID of your guest network.
 Security Mode: Select the wireless security or encryption of your guest network.
Steps to improve wireless connectivity
There are a number of factors that can impact the range of wireless devices. Follow
these tips to help improve your wireless connectivity:
1. Keep the number of obstructions to a minimum. Each obstruction can reduce the
range of a wireless device. Position the wireless devices in a manner that will
minimize the amount of obstructions between them.
a. For the widest coverage area, install your router near the center of your home,
and near the ceiling, if possible.
b. Avoid placing the router on or near metal objects (such as file cabinets and metal
furniture), reflective surfaces (such as glass or mirrors), and masonry walls.
c. Any obstruction can weaken the wireless signal (even non-metallic objects), so
the fewer obstructions between the router and the wireless device, the better.
d. Place the router in a location away from other electronics, motors, and
fluorescent lighting.
e. Many environmental variables can affect the router’s performance, so if your
wireless signal is weak, place the router in several locations and test the signal
strength to determine the ideal position.
2. Building materials can have a large impact on your wireless signal. In an indoor
environment, try to position the wireless devices so that the signal passes through
less dense material such as dry wall. Dense materials like metal, solid wood, glass
or even furniture may block or degrade the signal.
3. Antenna orientation can also have a large impact on your wireless signal. Use the
wireless adapter’s site survey tool to determine the best antenna orientation for
your wireless devices.
4. Interference from devices that produce RF (radio frequency) noise can also impact
your signal. Position your wireless devices away from anything that generates RF
noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n. If a wirelessly networked device uses an
older standard, the performance of the entire wireless network may be slower. If you
are still experiencing low or no signal consider repositioning the wireless devices or
installing additional access points.
© Copyright 2014 TRENDnet. All Rights Reserved.
16
TEW-721BRM
TRENDnet User’s Guide
Advanced wireless settings
Setup > Wireless Settings
The advanced wireless features can provide you with additional options for setting up
your wireless network such as multiple SSID, activate/deactivate wireless according to
schedule, and operation modes such as WDS (Wireless Distribution System) bridging or
wireless bridging.
Multiple SSID
Setup > Wireless Settings
The multiple SSID feature allows you to broadcast up to two additional SSIDs (or
wireless network names). To wireless devices searching for available wireless networks
to connect to, the SSIDs (or wireless network names) will appear as separate and
different wireless networks. Since they appear as separate wireless networks, they are
also referred to as virtual APs (Access Points). Each virtual AP can be configured each
with a different SSID (or wireless network name), security type and additional settings
for wireless devices to connect. You can use the multiple SSID feature to setup guest
wireless accounts with a different security type to keep your primary wireless network
security information private. In addition, the SSIDs can be mapped to a specified VLAN
ID. See the VLAN section for instructions on assigning VLAN IDs to the SSIDs.
 SSID Advertise: Select to broadcast SSID.
4. See section Secure your wireless network to configure wireless security settings.
Additional Wireless Settings
Advanced > Advanced Wireless
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on Advanced Wireless. Click Apply to save settings.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on MBSSID.
3. Review the settings and click Apply to save settings.
 Enable: Check box to enable SSID
 SSID (VAP): Enter the SSID you would like to apply.
 BSSID: MAC address of the SSID
 SSID Advertise: Select enable to broadcast the SSID or wireless network name.
© Copyright 2014 TRENDnet. All Rights Reserved.
17
TEW-721BRM
TRENDnet User’s Guide
 Regulatory Domain: The channel region assigned (FCC 1~11 or ETSI 1~13). This
setting cannot be modified and is displayed for informational purposes.
 Transmit Power: The wireless transmit power can be modified to a lower setting
such as 50%, 25%, and 12% if necessary. Lowering the wireless transmit may help
to better stabilize the wireless connectivity and reduce the effects of wireless
interference in areas where there are several 2.4GHz wireless devices. (Default:
100%)
 Data Rate: Select the operating wireless data rate.
 Fragment Threshold: Fragmentation in wireless networks is the process of breaking
down data communications into smaller data packets in order to improve data
efficiency when transferring or receiving data between wireless devices. The
fragmentation threshold defines the maximum size of the data packets that are
broken down.
 RTS Threshold: The Request To Send (RTS) function is part of the networking
protocol. A wireless device that needs to send data will send a RTS before sending
the data in question. The destination wireless device will send a response called
Clear to Send (CTS). The RTS Threshold defines the smallest data packet size
allowed to initiate the RTS/CTS function.
Default Value: 2347 (range: 256-2346)
 Beacon Interval: A beacon is a management frame used in wireless networks that
transmitted periodically to announce the presence and provide information about
the router’s wireless network. The interval is the amount time between each
beacon transmission.
Default Value: 100 milliseconds (range: 1-1000)
 Bandwidth: This setting only applies to wireless devices connecting at 802.11n.
Another term used to describe this parameter is Channel Width. Select the
appropriate channel width for your wireless network.
o 20 MHz: This mode operates using a single 20MHz channel for wireless devices
connecting at 802.11n. This setting may provide more stability than Auto 20/40
MHz for connectivity in busy wireless environments where there are several
wireless networks in the area.
o Auto 20 MHz/40 MHz: This mode can automatically switch between using a
single 20MHz channel or 40MHz (two 20MHz channels). When 40MHz is active,
this mode is capable of providing higher performance only if the wireless devices
support the 40MHz channel width. Enabling 20/40MHz typically results in
substantial performance increases when connecting to an 802.11n client.
 20/40MHz Coexist: Select enable to allow both 20MHz and 40MHz bandwidth
connections.
 Legacy Protection: Select to enable legacy protection feature.
 Control Sideband: Select the side band to use.
 Aggregation: Select to enable link aggregation feature.
 Short GI: Select to enable short guard interval (400ns).
Access Control Filters
Access control basics
Wireless MAC address filters
Advanced > Advanced Wireless > Wireless MAC Filter
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
wireless MAC filters, you can allow or deny specific wireless clients using this router’s
wireless network.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Advanced Wireless, and click on Wireless MAC Filter.
3. Review the settings and click Apply to save settings.
 Name (SSID): Select the SSID or wireless network name you would like to apply the
wireless MAC filter rule.
 MAC Restrict Mode: Select restriction type to use.
 MAC Address: Enter the MAC address to apply the rule. Click Add to add MAC
address to select rule.
Note: Any unspecified MAC/IP addresses or entries without the Allow option
checked will be denied network access.
© Copyright 2014 TRENDnet. All Rights Reserved.
18
TEW-721BRM
TRENDnet User’s Guide
MAC address filters
Advanced > Firewall > MAC Filter
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router’s wired or wireless network.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Firewall, and click on MAC Filter.
3. Add the MAC addresses to the MAC Table first before applying the MAC filter
function.
Note: MAC filter can be configured to allow access to the listed MAC address and
deny all others unlisted or vice versa. The recommended function is to choose to
only allow access to the MAC addresses listed and deny all others unlisted because it
is easier to determine the MAC addresses of devices in your network then to
determine which MAC addresses you do not want to allow access.
To simplify configuration, click the LAN clients drop-down list to select and computer or
device that is currently connected to your router. Once you have selected the computer
or device, click the ID drop-down list to select which entry to copy the selected DHCP
client information and click Clone. You can choose a DHCP client from the drop down
list or you can manually enter the MAC/IP address information.
Note: If you are manually entering the MAC/IP address information, refer to your
computer or device documentation to find the MAC address.
4. After the MAC address (e.g. 00:11:22:AA:BB:CC) and IP address (e.g. 192.168.10.101)
information is entered, make sure the Allow option next to the entry to allow
network access for this MAC address.
5. Next to MAC Address Control at the top of the page, check the Enable option to
enable MAC filtering. Note: Please add MAC/IP address entries first before enabling.
URL/Keyword Blocking
Advanced > Firewall > URL Filter
You may want to block computers or devices on your network access to websites using
specific keywords (e.g. chat, messenger) or URLs (Uniform Resource Locators).
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Firewall, and click on URL Filter.
3. Review the settings and click apply to save settings.
 URL Filter: Check option to enable feature.
 Show Redirect Page: Check option to redirect devices to another website when
attempting to access blocked websites.
4. Enter the FQDN or Keyword to block and click Add. Select the time schedule of when
to enable the rule or select Always to always block entry.
Domain Filters
Advanced > Firewall > URL Filter
You may want to allow or block computers or devices on your network access to
specific websites (e.g. www.trendnet.com, etc.), also called domains.
© Copyright 2014 TRENDnet. All Rights Reserved.
19
TEW-721BRM
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Firewall, and click on Domain Filter.
3. Under Domain blocking section select Enable.
4. Enter the website URL to block and click Add. Select the time schedule of when to
enable the rule or select Always to always block entry.
IP Filtering
Advanced > Firewall > IP Filter
You may want to block computers or devices on your network access to your network
using IP address.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Firewall, and click on URL Filter.
3. Click Add to enter settings.
 Enable: Check to enable rule.
 Filter Name: Enter the name of the IP filter rule.
 Start/End Destination IP Address: Enter the starting and ending points of the
source IP address to filer.
 Source/Destinatioin Port: Enter the source and destination ports of the filter IP
address.
 Protocol Type: Select the protocol to filter of the IP address.
 Schedule: Select the schedule to apply the IP filter rule or select Always.
Packet Filters
4. Review the settings and click Apply to save settings.
You may want specify inbound or outbound access control to allow/deny sources (or
Internet IP addresses) to your network from the Internet or from computers or devices
on your network to the Internet. Firewall rules may allow for more granular control of
specific inbound and outbound access between your network and the Internet. It is
recommended that these settings remain set to default unless you are knowledgeable
about the effects of changing the firewall rule configuration. It is possible to have
undesirable functionality from your router if these settings are improperly modified.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced and click on Packet Filter.
© Copyright 2014 TRENDnet. All Rights Reserved.
20
TEW-721BRM
TRENDnet User’s Guide
3. Under Packet Filter section select Enable and click Apply.
Filter
1. To create a new filter rule. Click Add in the Filters section.
2. Review the settings and click Apply to save.
 Name: Enter the name of the filter.
 Interface:
 Type: Select the type of packets to filter. In for incoming packets and Out to filter
outgoing packets Select the interface used for the filter..
 Default Action: Select to drop or allow the packets.
Rules
1. To create a new rule. Click Add in the Rules section.
2. Review the settings and click Apply to save.













Filter Name: Select the filter name to apply the rule. Enter the name of the filter.
Enable: Check to enable rule
Ether Type: Select the ether type to apply on the rule.
Protocol: Select the protocol type to apply on the rule.
Action: Select the action to take on the rule
Origin/Destination IP: Enter the IP address of the packets origin and destination
Origin/Destination Mask: Enter the Subnet mask of the packets origin and
destination.
VLAN ID: Enter the VLAN ID to apply on the rule
VLAN Priority: Enter the VLAN priority of the packets
VLAN Encapsulation: Enter the encapsulation type
FQDN: Enter the domain name
ALG: Select the ALG type
IP Option: Select IP option type
© Copyright 2014 TRENDnet. All Rights Reserved.
21
TEW-721BRM
TRENDnet User’s Guide
 DSCP: Select the DSCP value to apply
 Source/Destination MAC Address: Enter the source and destination MAC address
of the rule.
Advanced Router Setup
Access your router management page
Generic Rules
1. To create a new rule. Click Add in the Rules section.
Note: Your router management page http://192.168.10.1 is accessed through the use of
your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and
will be referenced frequently in this User’s Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera)
and go to http://192.168.10.1. Your router will prompt you for a user name and
password.
2. Review the settings and click Apply to save.
2. Enter the default user name and password and then click Login.
Default User Name: admin
Default Password: xxxxxxxxxx








Filter Name: Select the filter name to apply the rule. Enter the name of the filter.
Enable: Check to enable rule
Type: Select the value type to apply on the rule.
Proto: Select the IP Protocol data type
Position: Specify the location of the packet location
Condition: Select the condition type of the rule
Value: Enter the IP checksum value of the packet
Action: Select the action to take of the rule.
© Copyright 2014 TRENDnet. All Rights Reserved.
22
TEW-721BRM
TRENDnet User’s Guide
Change your router login password
Set your router date and time
Maintenance > Password
Setup > Time and Date
There are two ways to set the router’s date and time. NTP (Network Time Protocol) is
based on time servers. You can also manually set the router’s date and time.
Note: It is important that the time is configured correctly before setting any schedules.
Oour router management page http://192.168.10.1 is accessed through the use of your
Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and will be
referenced frequently in this User’s Guide.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Password.
3. Select the user name to apply changes to. In the Current Password field, enter the
current password. New Password field, enter the new password and in the Confirm
field, retype the new password again to confirm.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Time and Date.
3. Next to Time Zone, click the drop-down list to select your time zone.
4. Click Apply at the bottom of the page to save the changes.
Note: If you change the router login password, you will need to access the router
management page using the User Name “admin” and the new password instead of
the default password “admin”.
NTP
1. Review the settings below and click Apply to save settings.




Enable: Check option to enable NTP feature
Server IP: Enter the NTP server IP address or domain to use.
First Poll Frequency: Enter the initial time to check NTP
Thereafter Frequency: Select the time of when the router will continue to check
for NTP updates.
When using NTP time settings you may also configure Daylight Saving feature.
© Copyright 2014 TRENDnet. All Rights Reserved.
23
TEW-721BRM
TRENDnet User’s Guide
Internet Connection Settings
 Enable: Check option to enable daylight savings
 Start/End Time: Configure the start and end time of daylight savings.
Manual
1. Manually set the date and time of the router by select the from the pull down
menus. Click Sync Time to synchronize with your computer’s current time.




Year: Enter the year to Enable: Check option to enable NTP feature
Server IP: Enter the NTP server IP address or domain to use.
First Poll Frequency: Enter the initial time to check NTP
Thereafter Frequency: Select the time of when the router will continue to check
for NTP updates.
Manually configure your Internet connection
Setup > Internet Setup
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Internet Setup.
3. Review and configure your Internet connection settings. Click Apply to save settings.
Note: Please contact your ISP to determine all configuration settings.
 Profile Name: Enter the profile name of your connection.
 WAN Link Type: Select the WAN link connection type (ADSL)
 ATM Connection: Select the Permanent Vitrual Circuit (PVC) that will be
configured.
 Enable: Select enable to activate internet connection.
 Enable AutoPVC: Select whether to enable or disable AutoPVC connection.
 VPI: Enter your ISPs VPI (Virtual Path Identifier) values
 VCI: Enter your ISPs VCI (Virtual Channel Identifier) values.
 Encapsulation: Select your ISPs encapsulation settings.
 ATMQoS: Select the type of ATM Queue of Service used by your ISP.
 Peak Cell Rate: Set the maximum rate of cells provided by your ISP
 Backuped VLAN ID: Set the backup VLAN ID
 Enable Default VLAN: Select enable to activate VLAN
 PPPoE Passthrough: Select to enable PPPoE Passthrough.
© Copyright 2014 TRENDnet. All Rights Reserved.
24
TEW-721BRM
TRENDnet User’s Guide
Internet Settings
PPPoE / PPPoA
If you select PPPoE (RFC-2516 PPP over Ethernet), the screen below is displayed.
 Internet Settings: Select your ADSL internet type. Contact your ISP for additional
information.
 State of Connection: Select whether to enable or disable this connection.
 IPMode of Connection: Select the connection mode, options are:
© Copyright 2014 TRENDnet. All Rights Reserved.
25
TEW-721BRM
TRENDnet User’s Guide
o Dynamic: Select this option if the IP address can be automatically obtained from
your ISP.
o Static: Select this option if you are required to use a permanent IP address to
connect to the Internet. You must enter the IP address and subnet mask
provided by your ISP.
 Name: Enter your desired connection name.
 NAT: Select whether to enable or disable NAT (Network Address Translation).
Enable this setting to share one WAN IP address with multiple computers on your
network.
 User Name: Enter the user name provided by your ISP.
 User Password: Enter the password provided by your ISP.
 Confirm Password: Re-enter the password.
 Max MRU: Set the maximum rate of cells that you can receive. If provided by your
ISP, enter the rate in the field. Otherwise, leave this field to its default setting.
 DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
 DNS Override Allowed: Select whether to enable or disable DNS override.
 DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
 PPPoE Service Name: Enter a PPPoE service name.
 MAC Address: Display the cloned MAC address. Click Clone MAC to clone the MAC
address of your computer.
 PPPoE AC Name: Enter the PPPoE account name provided by your ISP.
 Connection Trigger: Configure how you want your modem router to connect and
terminate the Internet connection. Options are:
o OnDemand: Enables the modem router to cut off the Internet connection after
being idle for a specified period of time. The device automatically re-establishes
the connection when you try to access the Internet again. In the Idle Disconnect
Time field, enter the number of seconds that you want to elapse before your
modem router terminates the Internet connection.
o AlwaysOn: Enables the modem router to be connected to the Internet at all
times. If you are disconnected, the device will automatically re-establish the
connection.
o Manual: Manually configure this setting. Enter the user name and password to
establish the Internet connection.
 Idle Disconnect Time: View the preset idle time before the session is disconnected.
 LCP Interval: Enter the number of seconds that you want to be the interval in
sending LCP (Link Control Protocol) packets.
 As system default route: Check this box to set the current setting as the default
route.
 ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
 Proxy ARP Enable: Check this box to enable proxy ARP function.
IPoA
If you select IPoA, the screen below is displayed.
 State of Connection: Select whether to enable or disable this connection.
 Name: Enter your desired connection name.
 NAT: Select whether to enable or disable NAT (Network Address Translation).
Enable this setting to share one WAN IP address with multiple computers on your
network.
 External IP Address: Enter the IP address provided by your ISP.
 Subnet Mask: Enter the subnet mask provided by your ISP.
© Copyright 2014 TRENDnet. All Rights Reserved.
26
TEW-721BRM
TRENDnet User’s Guide




Default Gateway: Enter the default gateway provided by your ISP.
DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
DNS Override Allowed: Select whether to enable or disable DNS override.
DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
 As system default route: Check this box to set the current setting as the default
route.
 ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
 Proxy ARP Enable: Check this box to enable proxy ARP function.







Dynamic / Static

If you select Dynamic IP, the screen below is displayed.








State of Connection: Select whether to enable or disable this connection.
IP Protocol Version: Select the IP protocol version.
Name: Enter your desired connection name.
NAT: Select whether to enable or disable NAT (Network Address Translation).
Enable this setting to share one WAN IP address with multiple computers on your
network.
DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
DNS Override Allowed: Select whether to enable or disable DNS override.
DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
MAC Address: Displays the cloned MAC address. Click Clone MAC to clone the MAC
address of your computer.
Option 125: Select whether to enable or disable Option 125.
Option 60 Vendor ID: Enter option 60 vendor ID.
Option 61 IAID: Enter option 61 IAID.
Option 61 DUID: Enter option 61 DUID.
As system default route: Check this box to set the current setting as the default
route.
ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
Proxy ARP Enable: Check this box to enable proxy ARP function.
Unicast DHCP-Request: Check this box to enable unicast DHCP request function.
Bridge Mode
If you select Bridge mode, the screen below is displayed.
 State of Connection: Select whether to enable or disable this connection.
 IP Protocol Version: Select the IP protocol version.
 Name: Enter your desired connection name.
© Copyright 2014 TRENDnet. All Rights Reserved.
27
TEW-721BRM
TRENDnet User’s Guide
CIP
If you select CIP mode, the screen below is displayed.
 As system default route: Check this box to set the current setting as the default
route.
 ICMP Reply Enable: Check this box to enable ICMP (Internet Control Message
Protocol) messages to be sent back to the host that sent the message.
 Proxy ARP Enable: Check this box to enable proxy ARP function.
Change your router IP address
Setup > Local Network
In most cases, you do not need to change your router IP address settings. Typically, the
router IP address settings only needs to be changed, if you plan to use another router in
your network with the same IP address settings, if you are connecting your router to an
existing network that is already using the IP address settings your router is using, or if
you are experiencing problems establishing VPN connections to your office network
through your router.
Note: If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your router IP address settings as
default.
Default Router IP Address: 192.168.10.1
Default Router Network: 192.168.10.0 / 255.255.255.0










State of Connection: Select whether to enable or disable this connection.
IP Protocol Version: Select the IP protocol version.
Name: Enter your desired connection name.
NAT: Select whether to enable or disable NAT (Network Address Translation).
Enable this setting to share one WAN IP address with multiple computers on your
network.
External IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Gateway: Enter the default gateway provided by your ISP.
DNS Enabled: Select whether to enable or disable DNS (Domain Name System).
DNS Override Allowed: Select whether to enable or disable DNS override.
DNS Server 1 / DNS Server 2: If provided by your ISP, enter the DNS server.
Otherwise, leave these fields blank.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Local Network.
3. Review the settings and click Apply to save changes.
 LAN IP Address: Enter the new router IP address. (e.g. 192.168.200.1)
© Copyright 2014 TRENDnet. All Rights Reserved.
28
TRENDnet User’s Guide
TEW-721BRM
Note: You will need to access your router management page using your new router
IP address to access the router management page. (e.g. Instead of using the default
http://192.168.10.1 using your new router IP address will use the following format
using your new router IP address http://(new.router.ipaddress.here) to access your
router management page.
 Subnet Mask: Click the Subnet Mask drop-down list to select a mask. (e.g.
255.255.255.0)
 Local Domain Name: Enter the domain name to assign your router.
 DNS Relay: Select enable to activate DNS relay
Note: The DHCP address range will change automatically to your new router IP
address settings so you do not have to change the DHCP address range manually to
match your new router IP address settings.
Set up the DHCP server on your router
Setup > Local Network
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your network. The
DHCP server is enabled by default on your router. If you already have a DHCP server on
your network, or if you do not want to use your router as a DHCP server, you can
disable this setting. It is recommended to leave this setting enabled.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Setup, and click on Local Network.
3. Review the DHCP Server settings.
 DHCP Option: Select the DHCP mode of your modem router. If you set the DHCP
Option to DHCP Server, configure the following settings:
Note: If you set your modem router as the DHCP server, your modem router will
automatically assign an IP address to each computer on your network. By default,
the fields for DHCP settings have predefined values. It is recommended to retain
these values unless specified by your ISP.
 IP Pool Starting Address: Enter the lowest range of IP address to assign. The
default value is 192.168.10.101.
 IP Pool Ending Address: Enter the highest range of IP address to assign. The default
value is 192.168.10.200.
 Subnet Mask: Enter the subnet mask. The default value is 255.255.255.0.
 Router IP Address: Enter the IP address of your modem router. The default value is
192.168.10.1.
 Primary DNS Servers / Secondary DNS Servers: Enter a primary and a secondary
DNS server if the DNS Relay option is enabled.
 Lease Time: Enter the lease time in seconds. The lease time is the amount of time a
device is allowed connection to your modem router using its current dynamic IP
address. At the end of the lease time, the lease is either renewed or a new IP
address is assigned. The default value is 86400 seconds (1 day).
© Copyright 2014 TRENDnet. All Rights Reserved.
29
TEW-721BRM
TRENDnet User’s Guide
 Sub Range IP Enable: Check this box to set another range of IP address.
 Vendor Class (Option 60): Enter a vendor class name.
Sub-String Match: Check to enable the sub-string match function.
IP Pool Starting Address: Enter the lowest sub range of IP address to assign.
IP Pool Ending Address: Enter the highest sub range of IP address to assign.
Subnet Mask: Enter the subnet mask.
IPRouters: Enter the IP address of your modem router.
Primary DNS Servers / Secondary DNS Servers: Enter a primary and a secondary
DNS server of the sub range.
 Extra Option Enable: Check this box to enable extra options. If you set the DHCP
Option to DHCP Relay, configure the following settings:
Note: Some ISPs function as the DHCP server for their clients’ small office network.
In this case, you can set your modem router to act as a DHCP relay agent. When a
device on your network requests Internet access, your modem router contacts the
ISP to obtain the
Enable/disable UPnP on your router
Advanced > UPnP
UPnP (Universal Plug and Play) allows devices connected to a network to discover each
other and automatically open the connections or services for specific applications (e.g.
instant messenger, online gaming applications, etc.) UPnP is enabled on your router by
default to allow specific applications required by your computers or devices to allow
connections through your router as they are needed.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on UPnP.
3. Review the settings and click Apply to save settings.
 UPnP: Select this option to enable UPnP
 UPnP Log: Select this option to activate UPnP log and status
 TR064: Select this to option to enable TR064 feature.
Note: It is recommended to leave this setting enabled, otherwise, you may
encounter issues with applications that utilize UPnP in order allow the required
communication between your computers or devices and the Internet.
Allow/deny VPN connections through your router
Advanced > NAT > VPN Passthrough
A Virtual Private Network (VPN) is a network that uses a public network, such as the
Internet, to provide secure communications between a remote computer or network
and another network. Some offices often provide VPN access to their networks to
enable employees to work from their remote office/home office, or while traveling.
If your office or place of work has allowed and authorized access for you to access their
network through VPN, the default VPN settings in your router have been configured to
pass through the most common types of VPN protocols, which typically do not require
any additional configuration changes.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on NAT, and click on Passthrough.
3. Review the settings and click Apply to save settings.
 IPSEC Passthrough: Internet Protocol Security (IPSec) is a protocol suite used to
secure IP communications by authenticating and encrypting IP packets. Check this
box to enable this function to work through your modem router.
 PPTP Passthrough: Point-to-Point Tunneling Protocol (PPTP) allows Point-to-Point
protocol (PPP) to be tunneled through a network. Check this box to enable this
function to work through your modem router.
 L2TP Passthrough: Layer 2 Tunneling Protocol (L2TP) is an extension to the PPP
protocol that enables ISPs to operate VPNs.
Note: It is recommended to leave these settings unchecked to ensure VPN
passthrough capability is enabled on your router.
© Copyright 2014 TRENDnet. All Rights Reserved.
30
TEW-721BRM
TRENDnet User’s Guide
Configure ALG settings
Advanced > NAT > ALG
A Virtual Private Network (VPN) is a network that uses a public network, such as the
Internet, to provide secure communications between a remote computer or network
and another network. Some offices often provide VPN access to their networks to
enable employees to work from their remote office/home office, or while traveling.
If your office or place of work has allowed and authorized access for you to access their
network through VPN, the default VPN settings in your router have been configured to
pass through the most common types of VPN protocols, which typically do not require
any additional configuration changes.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on NAT, and click on ALG.
3. Review the settings and click Apply to save settings.
Protocol (IP). Check this box to enable this function to work through your modem
router.
 IRC: Internet Relay Chat (IRC) is a real-time Internet chatting protocol designed for
group communications. Check this box to enable this function to work through
your modem router.
 H323: H.323 is a standard that provides audio-visual communication sessions on a
network. It is widely implemented in voice and video conferencing equipments and
is used within various Internet real-time applications such as NetMeeting. Check
this box to enable this function to work
Additional Security Settings
Advanced > Firewall
To provide additional security, your router offers DoS (Denial of Service) detection and
SPI mode further prevent network attacks. You may want to enable these features for
additional network security.
DoS Protection
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Firewall, and click on DoS Protection.
3. Review the settings below and click Apply to save settings.
 FTP: File Transfer Protocol (FTP) is used to transfer files between computers on a
TCP/IP based network, such as the Internet. Check this box to enable this function
to work through your modem router.
 SNMP: Simple Network Management Protocol (SNMP) is a network protocol used
to monitor the devices connected to a network. Check this box to enable this
function to work through your modem router.
 RTSP: Real Time Streaming Protocol (RTSP) is a network protocol used for
entertainment and communication systems to control streaming media sessions.
Check this box to enable this function to work through your modem router.
 SIP: Session Initiation Protocol (SIP) is a signaling protocol used to control
multimedia communication sessions such as voice and video calls over Internet
© Copyright 2014 TRENDnet. All Rights Reserved.
31
TEW-721BRM
TRENDnet User’s Guide
 Dos Protection: Check this box to enable DoS protection.
 Dos Protection Option: Check the appropriate boxes to enable protection from
SYN flood, FIN flood, UDP flood, ICMP flood, SMURF, IP spoofing, and others. Enter
the flood count numbers or retain the default values if you are unsure about them.
SPI Settings
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Firewall, and click on SPI Settings.
3. Review the settings below and click Apply to save settings.
2. Click on Advanced, click on Multicast and select IGMP.
3. Under IGMP option select which IGMP to activate.
3. Review the settings below and click Apply to save changes.
IGMP Proxy /Snooping
 SPI Enable: Select whether to enable or disable the SPI function.
 Endpoint Filter: Select an endpoint filter option:
o Independent: Forwards all incoming traffic from an open port to the application
that opened the port.
o Restrict: Incoming traffic must match the IP address of the outgoing connection.
 Log Dropped Packet Enable: Select whether to enable or disable logging of
dropped packets from your network or the Internet.
Allow/deny multicast streaming
Setup > Internet Setup
In some cases, applications require multicast communication (also called IP multicast
which is the delivery of information to a specific group of computers or devices in a
single transmission) typically used in media streaming applications. Multicast streaming
is disabled by default on your router to deny applications that require multicast
communication through your router.
IGMP
1. Log into your router management page (see “Access your router management page”
on page 22).









IGMP Proxy Version: Select IGMP version to activate
DSL Interface: Select the interface to set
IGMP Fast Leave: Select option to enable fast leave feature
IGMP Query Interval: Enter IGMP query interval
Robust Count: Enter robust count
IGMP Last Member Query Interval: Enter last member query interval
IGMP Robustness: Enter robustness value
Query Response Interval: Enter response interval
Group Live Delay Time: Enter group live delay time
© Copyright 2014 TRENDnet. All Rights Reserved.
32
TEW-721BRM
TRENDnet User’s Guide
 WLAN/LAN1-4: Select device interface to reflect IGMP rule.
MLD
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on Multicast and select IGMP.
3. Under MLD option select which IGMP to activate.
3. Review the settings below and click Apply to save changes.
MLD Proxy /Snooping
Identify your network on the Internet
Advanced > Dynamic DNS
Since most ISPs constantly change your home IP address, providing access to devices on
your home or small office Local Area Network (such as IP Cameras) from the Internet
requires setting up a Dynamic DNS service and entering the parameters into this
management area. Dynamic DNS services allow your router to confirm its location to
the given Dynamic DNS service, thereby providing the Dynamic DNS service with the
ability to provide a virtual fixed IP address for your network. This means that even
though your ISP is always changing your IP address, the Dynamic DNS service will be
able to identify your network using a fixed address—one that can be used to view home
IP Camera and other devices on your local area network.
Note: First, you will need to sign up for one of the DDNS service providers listed in
the Server Address drop-down list.
1. Sign up for one of the DDNS available service providers list under Server Address.
(e.g. dyndns.com, no-ip.com, etc.)
2. Log into your router management page (see “Access your router management page”
on page 22).
3. Click on Advanced and click on Dynamic DNS.
4. Next to DDNS, click Enable.







DSL Interface: Select the interface to set
Fast Leave: Select option to enable fast leave feature
Query Interval: Enter IGMP query interval
Robust Count: Enter robust count
Last Member Query Interval: Enter last member query interval
Last Member Query Count: Enter last member query count
Query Response Interval: Enter response interval
5. In the Server Address drop-down list, select the provider you selected, and enter
your information in the fields.
 Host Name: Personal URL provided to you by your Dynamic DNS service provider
(e.g. www.trendnet.dyndns.biz)
© Copyright 2014 TRENDnet. All Rights Reserved.
33
TEW-721BRM
TRENDnet User’s Guide
 User Name / E-mail: The user name needed to log in to your Dynamic DNS service
account
 Password/Key: This is the password to gain access to Dynamic DNS service (NOT
your router or wireless network password) for which you have signed up to.
6. To save changes, click Apply.
Allow remote access to your router management page




Telnet Enable: Select to enable telnet remote access.
Session Timeout: Enter the session timeout period.
Listen Port: Enter the assigned telnet listen port
WAN Port: Enter the assigned port to use for remote management.
FTPD Management
Maintenance > Remote Management
You may want to make changes to your router from a remote location such at your
office or another location while away from your home.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Remote Management.
3. Under the Only allow administrator access from WAN section, click Enabled and
click Apply to save settings.
Http Management
 FTPD Enable: Select to enable FTPD remote access.
 Keep old session: Select to enable keep old session.
HTTPS Management
 HTTPS Enable: Select option to enable HTTPS
HTTPS Management
 Http Enable: Select to enable HTTP remote access.
 HTTP WAN Port: Enter the assigned port to use for remote management.
 Session Timeout: Enter the session timeout period.
CLI Management
 HTTP-Advanced Enable: Select option to enable featute
 Listen Port: Enter the assigned listening port
Configure remote access rules
Maintenance > Access Management
This page allows you to create and edit remote access rules. You can specify the IP
address or the subnet mask of devices that are allowed or denied to remotely access
your modem router and set the type of management service that they can access.
© Copyright 2014 TRENDnet. All Rights Reserved.
34
TEW-721BRM
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Access Management.
3. Click Add to a rule and Apply to save settings,
Packet Layer






User Name: Select the user name who can access the control rule.
Interface: Select the interface.
Match Type: Select the control rule type.
Match Condition: Select the control rule condition.
Host IP/Mask: Enter the IP address and IP mask of the remote device.
Service: Select the type of remote management service that the device can or
cannot access.
 Rule Action: Select whether to enable or disable the access rule.
Configure the router’s Ethernet port settings
Advanced > Ethernet Settings
This page allows you to set the link mode and enable flow control for each of the four
LAN ports of your modem router.




Interface: Select the interface.
Status: Select whether to enable or disable remote access of the device.
Remote IP: Enter the IP address of the remote device.
Remote IP Mask: Enter the IP mask of the remote device.
Note: To allow or deny all devices to remotely access your modem router, enter “*”
on the Remote IP and Remote
 Service: Select the type of remote management service that the device can or
cannot access.
 Rule Action: Select whether to enable or disable the access rule.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on Ethernet Settings.
3. Select the Interface you want to configure. Check Enable to actiave interface.
4. On the LinkMode pull down menu select the link speed to apply and check FlowCtrl
to enable flow control.
5. Click Apply to save settings.
Application Layer
Open a device on your network to the Internet
This router can provide access to devices on your local area network to the Internet
using the Virtual Server, Special Application, method (DMZ NOT recommended).
DMZ
Advanced > Firewall > DMZ
You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature
© Copyright 2014 TRENDnet. All Rights Reserved.
35
TRENDnet User’s Guide
that makes all the ports and services available on the WAN/Internet side of the router
and forwards them to a single IP address (computer or network device) on your
network. The DMZ feature is an easy way of allowing access from the Internet however,
it is a very insecure technology and will open local area network to greater threats from
Internet attacks.
It is strongly recommended to use Virtual Server (also called port forwarding, see
“Virtual Server” on page 35) to allow access to your computers or network devices from
the Internet.
1. Make sure to configure your computer or network device to use a static IP address or
you can use the DHCP reservation feature (see “Set up DHCP reservation” on page
53).
2. Log into your router management page (see “Access your router management page”
on page 22).
3. Click on Advanced, click on Firewall, and click on DMZ.
4. Select Enable next to DMZ.
5. In DMZ Host IP Address enter the IP address you assigned to the computer or
network device to expose to the Internet.
TEW-721BRM
Since most ISPs constantly change your home IP address, to be able to access the
Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS
service (See DynDNS section).
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on NAT, and click on Virtual Server option and click Add.
To simplify configuration, there is a list of commonly used pre-defined virtual server
entries to modify by clicking the drop down menu under rule name, otherwise, you
can choose to manually add a new virtual server.
3. Review the virtual server settings. Click Apply to save settings.
5. To save changes, click Apply.
Note: If using ADSL WAN with multiple PVCs, click the DMZ Mode drop-down list to
select Multi Mode which will allow you which PVC to assign the DMZ Host.
Virtual Server
Advanced > NAT > Virtual Server
Virtual Server (also called port forwarding) allows you to define specific ports (used or
required by a specific application) and forward them to a single IP address (a computer
or device) on your network. Using this feature is more secure compared to using DMZ
(see “DMZ” on page 35) in which DMZ forwards all ports instead of only specific ports
used by an application. An example would be forwarding a port to an network/IP
camera (typically on TRENDnet IP cameras use HTTP TCP port 80 for remote access web
requests) on your network for to allow remote access to it.
 Virtual Server: Select to enable rule.
 Rule Name: Enter the name of the rule or select from the predefine pull down
menu list.
 DSL Interface: The interface of the rule to be applied.
 Public Ports: Enter the port number required by your device from the internet. This
will be the same port number used to access the device from the Internet and will
include both TCP and UDP protocols.
 Private Ports: Enter the port number required by your device. This will be the same
port number used to access the device from your network and will include both
TCP and UDP protocols.
© Copyright 2014 TRENDnet. All Rights Reserved.
36
TRENDnet User’s Guide
Note: Please refer to the device documentation to determine which ports and
protocols are required.
 Protocol Type: Select the protol to assign the rule.
 Public IP: Enter the public IP that will have access to your device (you can enter
0.0.0.0 or * for all IP)
 Private IP: Enter the IP address of the device to forward the port. (e.g.
192.168.10.101).
Note: You should assign a static IP address to the device or use DHCP reservation to
ensure the IP address of the device does not change.
TEW-721BRM
use UPnP (Universal Plug and Play) to automatically configure your router to allow
access for applications. See “Enable/disable UPnP on your router” on page 29.
Note: Please refer to the device documentation to determine if your device supports
UPnP first, before configuring this feature.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, click on NAT, and click on Port Trigger option and click Add.
3. Review the port trigger settings and click Apply to save setting.
 Schedule - Click the drop-down list assign a pre-defined schedule when the virtual
server is activated or inactive.
Note: To define a schedule, see the “Create schedules” section.
4. To save changes, click Apply.
Example: To forward TCP port 80 to your IP camera
1. Make sure to configure your network/IP camera to use a static IP address or you can
use the DHCP reservation feature (see “Set up DHCP reservation” on page 53).
Note: You may need to reference your camera documentation on configuring a static
IP address.
1. Log into your router management page (see “Access your router management page”
on page 22).
3. Click on Advanced, click on NAT, and click on Virtual Server.
4. In the predefine pull down list, select the entry named WEB (80). In the ID dropdown list. Click << button.
6. Under Private IP, enter the IP address assigned to the camera. (e.g. 192.168.10.101)
7. Click Apply to save changes.
Port Trigger
Advanced > NAT > Port Trigger
Special applications (also called port triggering) is typically used for online gaming
applications or communication applications that require a range of ports or several
ports to be dynamically opened on request to a device on your network. The router will
wait for a request on a specific port or range of ports (or trigger port/port range) from a
device on your network and once a request is detected by your router, the router will
forward a single port or multiple ports (or incoming port/port range) to the device on
your network. This feature is not typically used as most devices and routers currently
 Port Trigger: Select to enable option.
 Rule Name: Enter the name to assign rule.
 Trigger: Port or port range requested by the device.(e.g. 2000-2001 or 2000)
Note: Please refer to the device documentation to determine which ports are
required.
 Use Interface: Select the interface to apply rule
 Trigger Ports: Port(s) forwarded to the device. (e.g. 2000-2038,2069,2081,22002210)
 Trigger Protocol: Select protocol to apply on rule
 Public Port: Enter the public port to assign on the rule
 Public Protocol: Select the public protocol to apply on rule.
 Time Schedule: Select the time schedule to activate rule. Select Always to have
rule always activated or click New Time Schedule to create a new time schedule.
Note: Please refer to the device documentation to determine which ports are required.
© Copyright 2014 TRENDnet. All Rights Reserved.
37
TEW-721BRM
TRENDnet User’s Guide
Prioritize traffic using QoS (Quality of Service)
Configuration > Advanced Setting > Quality of Service
You may want to prioritize outbound traffic for specific computers or devices on your
network to have higher priority.
Queue Config
This page allows you to configure a QoS queue entry and assign it to a specific network
interface. Each of the queues can be configured for a specific precedence. The queue
configuration will be used in Queue Classification to place ingress packets
appropriately.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on Quality of Service.
3. Review the settings and click on Apply to save settings.
Queue Management
This page allows you to enable QoS and choose Differentiated Services Code Point
(DSCP) markings to automatically mark incoming traffic without reference to a
particular classifier.




Name: Enter a QoS queue entry name.
Enable: Check this box to enable this queue.
Interface: Select the interface to implement this QoS queue.
Policy: Select the queue policy. Options are:
o SP: In Strict Priority (SP), packets with a high priority are processed first. Not until
the first queue is empty will another queue be processed.
o WFQ: In Weighted Fair Queuing (WFQ), each queue can be given a different
priority level. Each traffic is assignedto a class and each class is given its own
queue.
 Enable QoS: Check this box to enable the QoS feature.
 Default DSCP Mark: Select a DSCP mark. The DSCP mark is used to classify and
prioritize types of packets.
 Interface: Select the interface to implement this QoS queue.
 Default Rate: Check the Auto box to set the rate to its auto default or uncheck the
box to enter the QoS rate manually.
 Precedence: Select the precedence.
 Bandwidth Expression: Select one of the following options:
o Kbits: Enter the Shaping Rate and Ceiling Rate.
o Percent: Enter the Percent.
 Burst Size: Enter burst size.
© Copyright 2014 TRENDnet. All Rights Reserved.
38
TEW-721BRM
TRENDnet User’s Guide
Queue Classification
This section allows you to configure classification rules to classify upstream traffic and
assign queues which define the precedence, interface, and optionally overwrite the IP
header DSCP byte. A rule consists of a class name and at least one condition. All the
specified conditions in the classification rule must be satisfied for the rule to take
effect.
 Class Name: Enter a class name.
 Class Enable: Check this box to enable.
Classification Criteria
You can classify traffic based on ingress interface, Ether type, packet length, source or
destination MAC address/ MAC Mask, or a combination of them. Select an option or
enter the values on the fields that you want to use for the criteria. Otherwise, leave the
fields empty. Depending on the selected Ether Type, the succeeding required
information may vary. If packet length is used as a criteria, select the Packet Length
Rule from the drop-down list and enter the Packet Length.
Create schedules
Maintenance > Time Schedule
For additional security control, your router allows you to create schedules to specify a
time period when a feature on your router should be activated and deactivated. Before
you use the scheduling feature on your router, ensure that your router system time is
configured correctly. See page 23 to configure the system time.
Note: You can apply a predefined schedule to the following features:




Wireless
Virtual Server
Packet Filters
QoS
Create a schedule to define the days/time period when a feature should be active or
inactive:
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Time Schedule.
3. Review the settings and click Add to save settings.
 Name: Enter desired schedule name.
 Day: Check the day(s) to implement the schedule.
 Time: Specify the time period.
 Assign Classification Queue: Select the classification queue. Only enabled
classification queues from the Queue Classification page are listed here.
 Set VLAN Priority: Select a priority.
 Mark DSCP: Select the DSCP mark.
 Default VLAN ID: Check this box to use the default VLAN ID.
 VLAN ID: If Default VLAN ID is not checked, enter the preferred VLAN ID.
 Forwarding Policy Name: Select the forwarding policy name.
Add static routes to your router
Advanced > Static Route
You may want set up your router to route computers or devices on your network to
other local networks through other routers. Generally, different networks can be
determined by the IP addressing assigned to those networks. Generally speaking and
for the case of an example, your network may have 192.168.10.x IP addressing and
© Copyright 2014 TRENDnet. All Rights Reserved.
39
TEW-721BRM
TRENDnet User’s Guide
another network may have 192.168.20.x IP addressing and because the IP addressing of
these two networks are different, they are separate networks. In order to communicate
between the two separate networks, static routing needs to be configured. Below is an
example diagram where routing is needed for devices and computers on your network
to access the other network.
Note: Configuring this feature assumes that you have some general networking
knowledge.







Rule Enable: Select whether to enable or disable the rule.
Forwarding Policy Option: Select whether to enable or disable routing.
Rule Name: Enter desired rule name.
Source IP: Enter the source IP address.
Source SubMask: Enter the source subnet mask.
Gateway: Enter the gateway IP address.
Destination IP: Enter the destination IP address.
Enable dynamic routing on your router
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on Static Route.
3. Review the settings and click Apply to save settings.
Advanced > RIP Settings
You may want to setup your router to route computers or devices on your network to
other local networks through other routers. If other routers support dynamic routing
such as RIP (Routing Information Protocol), you can enable this feature on your router
to automatically learn the required routes to reach those networks. It is required that
the same dynamic routing protocol and version is also enabled on the other routers in
order your router and the other routers to exchange information about the network.
Note: Configuring this feature assumes that you have some general networking
knowledge.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Configuration at the top of the page, click on Advanced, and click on RIP
Setting.
© Copyright 2014 TRENDnet. All Rights Reserved.
40
TEW-721BRM
TRENDnet User’s Guide
3. Select the Inteface to configure then select appropriate dynamic routing protocol and
version communicate with other routers. Click Add to save settings.
 RIPv1: Enables sending and receiving or exchange of routing information
dynamically between your router and other routers to build routes to your network
and other networks using the RIP version 1 protocol.
 RIPv2: Enables sending and receiving routing information dynamically between
your router and other routers to build routes to your network and other networks
using the RIP version 2 protocol
 RIP 1: Receive routing information from other routers using the RIP version 1
protocol.
Setup Port Mapping
Advanced > Port Mapping
Port mapping allows you to group interfaces for traffic control. Traffic is isolated from
group to group. Therefore, traffic coming from an interface of a group can only be
flowed to the interfaces in the same group.
By default, all interfaces belong to the Default group. You can create new groups and
move interfaces to other groups. However, an interface can only be a member of one
group.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on Port Mapping.
3. Under Port Mapping section select Enable.
4. Click New to add a new group and select the interface from the Available Interfaces
section.
5. Click the <- button to add the selected interface into the group. Or click the -> button
to remove selected interface from the group.
6. Click Apply to save settings.
Setup IPv6 on your router
Advanced > IPv6
IPv6 (Internet Protocol Version 6) was developed to be the successor protocol to well
known and widely used protocol IPv4 (Internet Protocol Version 4) for network
addressing. The new addressing protocol is designed to minimize processing overhead
by routers, significantly increase the available IP address space, provide integrated
security, and open the possibility of more extensions and options. ISP have already
transition their networks to accommodate IPv6 and are starting to offer IPv6 services.
Note: The router offers native IPv6 as well as IPv4 to IPv6 transitional connection
types.
IPv6 WAN
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on IPv6 WAN.
4. Select your IPv6 WAN type and complete the fields required by your ISP. Click Apply
to save settings.
© Copyright 2014 TRENDnet. All Rights Reserved.
41
TEW-721BRM
TRENDnet User’s Guide
Note: If you are unsure which Internet connection type you are using, please
contact your ISP (Internet Service Provider).
IPv6 LAN
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on IPv6 LAN.
4. Select your IPv6 WAN Interface on the pull down menu and click Apply to save
settings.
Router Maintenance & Monitoring
Reset your router to factory defaults
Maintenance > Configuration Backup/Restore
You may want to reset your router to factory defaults if you are encountering
difficulties with your router and have attempted all other troubleshooting. Before you
reset your router to defaults, if possible, you should backup your router configuration
first, see “Backup and restore your router configuration settings” on page 43.
There are two methods that can be used to reset your router to factory defaults.

Configure ADSL settings
Advanced > ADSL
This page allows you to select ADSL modulations, capabilities, and other options.
Consult your ISP to determine the appropriate settings.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced, and click on ADSL.
4. Select the fields required by your ISP. Click Apply to save settings.

Reset Button: Located on the front panel of your router, see “Product
Hardware Features” on page 2 . Use this method if you are encountering
difficulties with accessing your router management page.
OR
Router Management Page
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Configuration Backup/Restore.
3. Under Restore Factory Default, click Restore. When prompted to confirm this action,
click OK.
© Copyright 2014 TRENDnet. All Rights Reserved.
42
TRENDnet User’s Guide
TEW-721BRM
Router Default Settings
Administrator User Name
admin
Administrator Password
admin
Router IP Address
192.168.10.1
Router Subnet Mask
255.255.255.0
DHCP Server IP Range
192.168.10.101-192.168.199
Wireless
Enabled
SSID (wireless network name)
Please refer sticker or device label
Wireless Security
Please refer sticker or device label
802.11 Mode
2.4GHz 802.11b/g/n mixed mode
Channel
Auto Channel
© Copyright 2014 TRENDnet. All Rights Reserved.
43
TEW-721BRM
TRENDnet User’s Guide
Backup and restore your router configuration settings
To restore your router configuration:
Maintenance > Configuration Backup/Restore
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Configuration Backup/Restore.
3. Under Restore Settings, next to Load Settings, depending on your web browser, click
on Browse or Choose File.
To backup your router configuration:
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Configuration Backup/Restore.
3. Click Backup Settings.
3. Depending on your web browser settings, you may be prompted to save a file
(specify the location) or the file may be downloaded automatically to the web
browser settings default download folder. (Default Filename: config.bin)
4. Save the configuration file to location on your computer.
A separate file navigation window should open.
4. Navigate to the location of the router configuration file to restore.
(Default Filename: config.bin).
5. Select the router configuration file to restore and click Restore Settings.
(Default Filename: config.bin). If prompted, click Yes or OK.
6. Wait for the router to restore settings.
© Copyright 2014 TRENDnet. All Rights Reserved.
44
TRENDnet User’s Guide
Upgrade your router firmware
Maintenance > FW Upgrade
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet router model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link. http://www.trendnet.com/downloads/
In addition, it is also important to verify if the latest firmware version is newer than the
one your router is currently running. To identify the firmware that is currently loaded
on your router, log in to the router, and check the version located at the top right of the
router management page. If there is a newer version available, also review the release
notes to check if there were any new features you may want or if any problems were
fixed that you may have been experiencing.
TEW-721BRM
3. Depending on your web browser, next to Upgrade Firmware, click Browse or Choose
File.
4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it.
5. Click Upgrade to start the firmware upgrade process. If prompted, click yes or OK.
1. If a firmware upgrade is available, download the firmware to your computer.
2. Unzip the file to a folder on your computer.
Please note the following:
 Do not interrupt the firmware upgrade process. Do not turn off the device or press
the Reset button during the upgrade.
 If you are upgrade the firmware using a laptop computer, ensure that the laptop is
connected to a power source or ensure that the battery is fully charged.
 Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
 Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
 Any interruptions during the firmware upgrade process may permanently damage
your router.
1. Log into your router management page (see “Access your router management page”
on page 22).
Note: You can check your router’s current firmware version at the top right of the
page.
2. Click on Maintenance, and click on FW Upgrade.
Note: This page also displays the current firmware version of your router.
© Copyright 2014 TRENDnet. All Rights Reserved.
45
TEW-721BRM
TRENDnet User’s Guide
Restart your router
Maintenance > Reboot Device
You may want to restart your router if you are encountering difficulties with your
router and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.
 Turn the router off disconnect the power adapter from the rear panel of your
router for 10 seconds and reconnect the power adapter, see “Product Hardware
Features” on page 2 .
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
OR
 Router Management Page: This is also known as a soft reboot or restart.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Reboot Device. If prompted, click yes or OK.
3. Click Reboot to restart the router. If prompted, click yes or OK.
4. You will receive a success or fail result message of the address you entered providing
a basic indicating of the router’s connectivity to the Internet or devices that are
connected to your network.
Manage Initialization Scripts
Maintenance > Init Script
This page allows you to show, delete, and import initialization scripts running on
customer-premises equipment (CPE), such as telephones, routers, or set-top boxes,
during system startup or shutdown.
Init start scripts are scripts that run before the system starts up. Init end scripts are
scripts that run before the system shuts down.
Check connectivity using the router management page
Maintenance > Ping
For troubleshooting purposes, you may want to check your router connectivity using
the ping (also known as a network connectivity test) test tool on your router
management page.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Init script.
3. Click Browse and select your script.
4. Click Import Script to import script to router.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Ping.
3. Next to Host IPv4 Address, enter in the IP address (e.g. 192.168.10.101) or host
name (e.g. www.trendnet.com) to test and click Ping.
© Copyright 2014 TRENDnet. All Rights Reserved.
46
TEW-721BRM
TRENDnet User’s Guide
5. To show scripts on your computer click Show script. Press Delete to remove script.
Check Internet connectivity using the router management
page
Maintenance > Diagnostic
This page allows you to test the connectivity of the physical and protocol layers on the
WAN side.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Diagnostic.
3. Select your DSL interface and click test.
Check the router system information
Status > Summary
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, and router MAC address information.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status.
3. Review the device information.
© Copyright 2014 TRENDnet. All Rights Reserved.
47
TEW-721BRM
TRENDnet User’s Guide
System
ATM PVC Status











Firmware Version: Displays the firmware version currently loaded on the router
Modem Type: Displays the modem type
Modem Vendor: Displays modem vendor
Modem OUI: Displays modem OUI
Modem Serial Number: Serial number of modem
Uptime: Time duration of modem up time
Current Time: Time of router
DSL Link Status
VPI: Current VPI settings applied on the router
VCI: Current VCI settings applied on the router
Link Type: Link type applied on the router
Encapsulation: Current encapsulation applied on the router.
ATM PVC Status
 Interface: Current router PVC interface
 Connection Status: Current internet connection status
LAN Status
 Modulation Type: Display the modulation applied on the router
 Current Rate: Downstream and upstream data rate




IP Address: Router’s IP address
Subnet Mask: Router’s subnet mask
MAC Address: MAC address of router
DHCP Server: Current status of router’s DHCP
© Copyright 2014 TRENDnet. All Rights Reserved.
48
TEW-721BRM
TRENDnet User’s Guide
Wireless Interface





Mode: Current wireless mode
Channel: Wireless channel
SSID: Wireless network name
MAC Address: Wireless MAC address
Security Mode: Wireless encryption of security
Check the router IPv6 status
Status > IPv6 Info
You may want to check the system IPv6 information of your router.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status and IPv6 Info.
3. Review the device information.
Check the router Wireless clients
Check the router IPv6 status
Status > ADSL Info
You may want to check the system ADSL information of your router.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status and ADSL Info.
3. Review the device information.
Status > Wireless Clients
This page displays all connected wireless clients.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status and Wireless Clients.
3. Review the device information.
© Copyright 2014 TRENDnet. All Rights Reserved.
49
TEW-721BRM
TRENDnet User’s Guide
Check the router LAN clients
Status > LAN Clients
This page displays all connected clients.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status and LAN Clients.
3. Review the device information.
2. Click on Status and Basic Statistics.
3. Review the device information.
Check the router Routing Table
Status > Routing Table
This page displays all connected clients.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status and Routing Table.
3. Review the device information.
Check the router DSL Statistics
Check the router Basic Statistics
Status > Statistics > Basic Statistics
This page displays all connected clients.
1. Log into your router management page (see “Access your router management page”
on page 22).
Status > Statistics > DSL Statistics
This page displays all connected clients.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status and DSL Statistics.
3. Review the device information.
© Copyright 2014 TRENDnet. All Rights Reserved.
50
TEW-721BRM
TRENDnet User’s Guide
 IP Address: Router’s IP address
 Subnet Mask: Router’s subnet mask
 MAC Address: MAC address of router
View your router log
Status > Logs
Your router log can be used to obtain activity information on the functionality of your
router or for troubleshooting purposes.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, and click on Syslog.
3. Review the device log information. You can filter the log view by selecting a particular
Facility, Severity, Module, or History option.
 First Page: Displays the first page of the log.
 Last Page: Displays the last page of the log.
 Previous Page: Display the log page previous to the current. The Page: 1/1 will
display the current page.
 Next Page: Displays the log page next to the current.
 Clear Log:- Clears log entries
 Clear History: Clear all log entries
 Refresh: The Page: 1/1 will display the current page.
 Backup Logs: Click to save logs to a local text file on your local hard drive.
View your router traffic
Status > Traffic Meter
Your router log can be used to obtain activity information on the functionality of your
router or for troubleshooting purposes.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Status, and click on Traffic Meter.
3. On the Traffic Data Interface section, check the Status box of the interface to view
its traffic. You may check more than one interface.
© Copyright 2014 TRENDnet. All Rights Reserved.
51
TEW-721BRM
TRENDnet User’s Guide
4. On the Traffic Bandwidth Interval section, enter the interval of refreshing the traffic
bandwidth.
Configure your router log
Maintenance > Syslog
You may want send your router log to your e-mail address or to an external log server
(also known as Syslog server) so you can check it periodically while away from home.
You may also want to only see specific categories of logging.
 Module: Select the module type.
 Facility: Select the facility type.
 Severity: Select the severity level.
Note: emerg is the highest level while debug is the lowest level.
 Location: Enter an assigned location for your log.
Note: The succeeding fields may vary depending
If the Location is set to Mail, configure the following settings:
Send router logs to an external log server
Maintenance > Syslog
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, click on Syslog.
3. Next to Syslog and check Enable.
4. Click Add in Log Rules Settings. Click Apply to save settings.
 SMTP Server IP of Domain Name: Enter the IP address (i.e. 10.10.10.10) or
domain name (i.e. mail.trendnet.com) of your e-mail server.
 Source E-mail Address: Enter the sender or source mail address. You can se this
to easily identify the notification in your email inbox. (i.e. modem_
router@trendnet. com)
 Destination E-mail Address: Enter your e-mail address.
 SMTP Authentication: Check the box if your e-mail server requires authentication.
If enabled, enter the account name and password in the
 SMTP Username: Enter the account name required for authentication by your
SMTP mail server.
© Copyright 2014 TRENDnet. All Rights Reserved.
52
TEW-721BRM
TRENDnet User’s Guide
 SMTP Password/Confirm Password: Enter the password required for
authentication by your SMTP mail server. Enter the password again in the
Send router logs to your e-mail address
Maintenance > Syslog
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance, click on Syslog.
3. Review the e-mail log settings and click Apply to save setting.
 SMTP Server: Check the box to enable the email log notification.
 SMTP Server IP: Enter the IP address (i.e. 10.10.10.10) or domain name (i.e. mail.
trendnet.com) of your e-mail server.
 Source E-mail Address: Enter the sender or source mail address. You can use this
to easily identify the notification in your email inbox. (i.e. modem_router@
trendnet. com)
 Destination E-mail Address: Enter your e-mail address.
 SMTP Authentication: Check the box if your e-mail server requires authentication.
 SMTP Username: Enter the account name required for authentication by your
 SMTP Password/Confirm Password: Enter the password required for
authentication by your SMTP mail server. Enter the password again in the
 Time Frequence: Select the frequency of logging e-mails.
Enable SNMP on your router
Advanced > SNMP
SNMP (Simple Network Management Protocol) is a network management protocol
used to monitor (read) and/or manage (write) multiple network devices on a network.
This preconfigured external SNMP server.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Advanced and click on SNMP.
3. Review the options for SNMP and click Apply to save settings..
 System Contact: Enter the contact person or contact information for your modem
router.
 System Name: Enter an assigned name for your modem router.
 System Location: Enter an assigned location for your modem router.
 Public Community/Private Community: Enter a public and private community
name.
 Trap: Check this box to enable the Trap function, then provide the following
information:
 Trap Version: Select an SNMP trap version.
 Trap Address: Enter the destination IP address of the SNMP trap.
© Copyright 2014 TRENDnet. All Rights Reserved.
53
TRENDnet User’s Guide
Enable TR-069 on your router
Maintenance > TR069 Setting
TR-069 is a network management protocol used to remote manage multiple network
devices on a network typically by ISPs (Internet Service Providers). TR069 usually used
in conjunction with ACS (Auto Configuration Servers) server managed by your ISP.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Maintenance and click on TR069 Setting.
3. Please consult your ISP for the required TR069 settings for remote management.
Click Apply to save settings.
TEW-721BRM
 ACS User Name: Enter the user name of your modem router when connecting to
the ACS.
 ACS Password/Confirm Password: Enter the password that your modem router
should use when connecting to the ACS. Re-enter the password on the Confirm
 Connection Request Enable: Check the box to enable the connection request.
 Connection Request Port: Enter the port that issues the request.
 Connection Request User Name: Enter the connection request user name.
 Connection Request Password/Confirm Password: Enter the connection request
password. Re-enter the password on the Confirm Password field.
 Verify Server Certificate: Check this box to verify server certificates.
 Use Soap v1.2: Check this box to enable the SOAP protocol.
 Periodic Inform: Select Enable to let your modem router to send remote procedure
calls (RPC) to the ACS server at system startup and will continue sending RPCs
periodically. When disabled, your modem router will send RPCs to
the ACS server at system startup only.
 Periodic Inform Interval: Enter the interval time of sending RPCs.
 Enable: Check this box to enable TR069.
 ACS URL Address: Enter the URL of the Auto-Configuration Server (ACS).
© Copyright 2014 TRENDnet. All Rights Reserved.
54
TRENDnet User’s Guide
Troubleshooting
Q: I typed http://192.168.10.1 in my Internet Browser Address Bar, but an error
message says “The page cannot be displayed.” How can I access the router
management page?
Answer:
1. Check your hardware settings again. See “Router Installation” on page 2.
2. Make sure the LAN and WLAN lights are lit.
3. Make sure your network adapter TCP/IP settings are set to Obtain an IP address
automatically or DHCP (see the steps below).
4. Make sure your computer is connected to one of the router’s LAN ports
5. Press on the factory reset button for 15 seconds, the release.
Windows 7
a. Go into the Control Panel, click Network and Sharing Center.
b. Click Change Adapter Settings, right-click the Local Area Connection icon.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Obtain an IP address automatically and click OK.
Windows Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right-click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Obtain an IP address automatically and click OK.
Windows XP/2000
a. Go into the Control Panel, double-click the Network Connections icon
b. Right-click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Obtain an IP address automatically and click OK.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
TEW-721BRM
Q: I am not sure what type of Internet Account Type I have for my Cable/DSL
connection. How do I find out?
Answer:
Contact your Internet Service Provider (ISP) for the correct information.
Q: The Wizard does not appear when I access the router. What should I do?
Answer:
1. Click on Setup Wizard on the left hand side.
2. Near the top of the browser, “Pop-up blocked” message may appear. Right click on
the message and select Always Allow Pop-ups from This Site.
3. Disable your browser's pop up blocker.
Q: I went through the Wizard, but I cannot get onto the Internet. What should I do?
Answer:
1. Verify that you can get onto the Internet with a direct connection into your ADSL
modem from your ISP (meaning, plug your computer directly to the modem and verify
that your single computer (without the help of the router) can access the Internet).
2. Power cycle your modem router. Unplug the power to the modem router. Wait 30
seconds, and then reconnect the power to the modem router. Wait for the modem
router to fully boot up, then try to re-access the Internet .
3. Contact your ISP and verify all the information that you have in regards to your
Internet connection settings is correct.
Q: I cannot connect wirelessly to the router. What should I do?
Answer:
1. Double check that the WLAN light on the router is lit.
2. Power cycle the router. Unplug the power to the router. Wait 15 seconds, then plug
the power back in to the router.
3. Contact the manufacturer of your wireless network adapter and make sure the
wireless network adapter is configured with the proper SSID. The preset SSID is
TRENDnet(model_number).
4. To verify whether or not wireless is enabled, login to the router management page,
click on Wireless.
5. Please see “Steps to improve wireless connectivity” on page 19 if you continue to
have wireless connectivity problems.
© Copyright 2014 TRENDnet. All Rights Reserved.
55
TRENDnet User’s Guide
Appendix
How to find your IP address?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Command Prompt Method
Windows 2000/XP/Vista/7
1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run
dialog box.
2. In the dialog box, type cmd to bring up the command prompt.
3. In the command prompt, type ipconfig /alto display your IP address settings.
MAC OS X
1. Navigate to your Applications folder and open Utilities.
2. Double-click on Terminal to launch the command prompt.
3. In the command prompt, type ipconfiggetifaddrto display the wired or
wireless IP address settings.
Note: en0 is typically the wired Network and en1 is typically the wireless Airport
interface.
Graphical Method
MAC OS 10.6/10.5
1. From the Apple menu, select System Preferences.
2. In System Preferences, from the View menu, select Network.
3. In the Network preference window, click a network port (e.g., Network, AirPort,
modem). If you are connected, you'll see your IP address settings under "Status:"
MAC OS 10.4
1. From the Apple menu, select Location, and then Network Preferences.
2. In the Network Preference window, next to "Show:", select Network Status. You'll see
your network status and your IP address settings displayed.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
TEW-721BRM
How to configure your network settings to obtain an IP address automatically or use
DHCP?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Windows 7
a. Go into the Control Panel, click Network and Sharing Center.
b. Click Change Adapter Settings, right-click the Local Area Connection icon.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Obtain an IP address automatically and click OK.
Windows Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right-click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Obtain an IP address automatically and click OK.
Windows XP/2000
a. Go into the Control Panel, double-click the Network Connections icon
b. Right-click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Obtain an IP address automatically and click OK.
MAC OS 10.4/10.5/10.6
a. From the Apple, drop-down list, select System Preferences.
b. Click the Network icon.
c. From the Location drop-down list, select Automatic.
d. Select and view your Network connection.
In MAC OS 10.4, from the Show drop-down list, select Built-in
Network and select the TCP/IP tab.
In MAC OS 10.5/10.6, in the left column, select Network.
e. Configure TCP/IP to use DHCP.
In MAC 10.4, from the Configure IPv4, drop-down list, select Using
DHCP and click the Apply Now button.
In MAC 10.5, from the Configure drop-down list, select Using DHCP
and click the Apply button.
© Copyright 2014 TRENDnet. All Rights Reserved.
56
TEW-721BRM
TRENDnet User’s Guide
In MAC 10.6, from the Configure drop-down list, select Using DHCP
and click the Apply button.
f. Restart your computer.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
How to find your MAC address?
In Windows 2000/XP/Vista/7,
Your computer MAC addresses are also displayed in this window, however, you can type
getmac –v to display the MAC addresses only.
In MAC OS 10.4,
1. Apple Menu > System Preferences > Network
2. From the Show menu, select Built-in Network.
3. On the Network tab, the Network ID is your MAC Address.
In MAC OS 10.5/10.6,
1. Apple Menu > System Preferences > Network
2. Select Network from the list on the left.
3. Click the Advanced button.
3. On the Network tab, the Network ID is your MAC Address.
How to connect to a wireless network using the built-in Windows utility?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
connecting to a wireless network using the built-in utility.
Windows 7
1. Open Connect to a Network by clicking the network icon ( or ) in the notification
area.
2. In the list of available wireless networks, click the wireless network you would like to
connect to, then click Connect.
4. You may be prompted to enter a security key in order to connect to the network.
5. Enter in the security key corresponding to the wireless network, and click OK.
Windows Vista
1. Open Connect to a Network by clicking the Start Button. and then click Connect To.
2. In the Show list, click Wireless.
3. In the list of available wireless networks, click the wireless network you would like to
connect to, then click Connect.
4. You may be prompted to enter a security key in order to connect to the network.
5. Enter in the security key corresponding to the wireless network, and click OK.
Windows XP
1. Right-click the network icon in the notification area, then click View Available
Wireless Networks.
2. In Connect to a Network, under Available Networks, click the wireless network you
would like to connect to.
3. You may be prompted to enter a security key in order to connect to the network.
4. Enter in the security key corresponding to the wireless network, and click Connect.
© Copyright 2014 TRENDnet. All Rights Reserved.
57
TRENDnet User’s Guide
Federal Communication Commission Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance
20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Country Code selection feature to be disabled for products marketed to the
US/CANADA.
RoHS
TEW-721BRM
Europe – EU Declaration of Conformity
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC,
2006/95/EC and 2009/125/EC.
Regulation (EC) No. 1275/2008
Regulation (EC No. 278/2009
EN60950-1 : 2006 + A11 : 2009 + A1: 2010 + A12: 2011
Safety of Information Technology Equipment
EN 50385 : 2002
Product standard to demonstrate the compliance of radio base stations and fixed
terminal stations for wireless telecommunication systems with the basic restrictions or
the reference levels related to human exposure to radio frequency electromagnetic
fields
(110MHz - 40 GHz) - General public
EN 300 328 V1.7.1 : (2006-10) Class B
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband
Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band
and using spread spectrum modulation techniques; Harmonized EN covering essential
requirements under article 3.2 of the R&TTE Directive
EN 301 489-1 V1.9.2 : (2011-09)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common
technical requirements
EN 301 489-17 V2.1.1 : (2009-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for 2,4
GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8
GHz Broadband Data Transmitting Systems
In Italy the end-user should apply for a license at the national spectrum authorities in
order to obtain authorization to use the device for setting up outdoor radio links and/or
for supplying public access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some
areas the RF output power may be limited to 10 mW EIRP in the frequency range of
2454 – 2483.5 MHz. For detailed information the end-user should contact the national
spectrum authority in France.
This product is RoHS compliant.
© Copyright 2014 TRENDnet. All Rights Reserved.
58
TEW-721BRM
TRENDnet User’s Guide
Česky [Czech]
TRENDnet tímto prohlašuje, že tento TEW-721BRM je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice
1999/5/ES, 2006/95/ES, a 2009/125/ES.
Dansk [Danish]
Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW721BRM overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF, 2006/95/EF, og 2009/125/EF.
Deutsch
[German]
Eesti [Estonian]
English
Español
[Spanish]
Ελληνική
[Greek]
Français
[French]
Hiermit erklärt TRENDnet, dass sich das Gerät TEW-721BRM in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/ EG,
2006/95/EG und 2009/125/EG befindet.
Käesolevaga kinnitab TRENDnet seadme TEW-721BRM vastavust
direktiivi 1999/5/EÜ, 2006/95/EÜ ja 2009/125/EÜ põhinõuetele ja
nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Hereby, TRENDnet, declares that this TEW-721BRM is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC, 2006/95/EC, and 2009/125/EC.
Por medio de la presente TRENDnet declara que el TEW-721BRM
cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE,
2006/95/CE, 2009/125/CE y.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙ TEW-721BRM
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ, 2006/95/ΕΚ,
2009/125/ΕΚ και.
Par la présente TRENDnet déclare que l’appareil TEW-721BRM est
conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE, 2006/95/CE, 2009/125/CE et.
Italiano[Italian]
Con la presente TRENDnet dichiara che questo TEW-721BRM è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE, 2006/95/CE e 2009/125/CE.
Latviski [Latvian]
AršoTRENDnetdeklarē, ka TEW-721BRM atbilstDirektīvas 1999/5/ EK,
2006/95/EK, un 2009/125/EK būtiskajāmprasībām un citiemar to
saistītajiemnoteikumiem.
Lietuvių
Šiuo TRENDnet deklaruoja, kad šis TEW-721BRM atitinka esminius
reikalavimus ir kitas 1999/5/EB, 2006/95/EB ir 2009/125/EB
[Lithuanian]
Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart TRENDnet dat het toestel TEW-721BRM in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG, 2006/95/EG, en
2009/125/EG.
Malti [Maltese]
Magyar
[Hungarian]
Polski [Polish]
Hawnhekk, TRENDnet, jiddikjara li dan TEW-721BRM jikkonforma
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/KE, 2006/95/KE, u 2009/125/KE.
Alulírott, TRENDnet nyilatkozom, hogy a TEW-721BRM megfelel a
vonatkozó alapvetõ követelményeknek és az 1999/5/EK irányelv, a
2006/95/EK és a 2009/125/EK irányelv egyéb elõírásainak.
Niniejszym TRENDnet oświadcza, że TEW-721BRM jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/WE, 2006/95/WE i
2009/125/WE.
Português
[Portuguese]
TRENDnet declara que este TEW-721BRM está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE,
2006/95/CE e 2009/125/CE.
Slovensko
[Slovenian]
TRENDnet izjavlja, da je ta TEW-721BRM v skladu z bistvenimi
zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES,
2006/95/ES in 2009/125/ES.
Slovensky
[Slovak]
TRENDnettýmtovyhlasuje, že TEW-721BRM
spĺňazákladnépožiadavky a všetkypríslušnéustanoveniaSmernice
1999/5/ES, 2006/95/ES, a 2009/125/ES.
Suomi [Finnish]
Svenska
[Swedish]
TRENDnet vakuuttaa täten että TEW-721BRM tyyppinen laite
on direktiivin 1999/5/EY, 2006/95/EY ja 2009/125/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen
mukainen.
Härmed intygar TRENDnet att denna TEW-721BRM står I
överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG,
2006/95/EG och 2009/125/EG.
© Copyright 2014 TRENDnet. All Rights Reserved.
59
TRENDnet User’s Guide
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TEW-721BRM – 3 Years Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period,
TRENDnet shall reserve the right, at its expense, to repair or replace the defective
product or part and deliver an equivalent product or part to the customer. The
repair/replacement unit’s warranty continues from the original date of purchase. All
products that are replaced become the property of TRENDnet. Replacement products
may be new or reconditioned. TRENDnet does not issue refunds or credit. Please
contact the point-of-purchase for their return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product by any unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable
warranty period and providing a copy of the dated proof of the purchase. Upon proper
submission of required documentation a Return Material Authorization (RMA) number
will be issued. An RMA number is required in order to initiate warranty service support
for all TRENDnet products. Products that are sent to TRENDnet for RMA service must
have the RMA number marked on the outside of return packages and sent to TRENDnet
prepaid, insured and packaged appropriately for safe shipment. Customers shipping
from outside of the USA and Canada are responsible for return shipping fees. Customers
shipping from outside of the USA are responsible for custom charges, including but not
limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Limited Warranty
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE
OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST
OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL
OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Some TRENDnet products include software code written by third party developers.
These codes are subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section
and look for the desired TRENDnet product to access to the GPL Code or LGPL Code.
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of
the developers. TRENDnet does not provide technical support for these codes. Please go
to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for
specific terms of each license.
2014/09/10
© Copyright 2014 TRENDnet. All Rights Reserved.
60


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2014:09:14 13:09:42-07:00
Creator Tool                    : Microsoft® Word 2013
Modify Date                     : 2014:09:19 13:08:10+08:00
Metadata Date                   : 2014:09:19 13:08:10+08:00
Format                          : application/pdf
Creator                         : Jonathan
Title                           : test 3
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:211ea3d5-8acb-43ce-9a96-d55a722ddb6e
Instance ID                     : uuid:1bfa3fe6-fd1b-42e0-bafd-161d8bfeada8
Page Count                      : 64
Language                        : en-US
Author                          : Jonathan
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XU8TEW721BRM

Navigation menu