TRENDNET TEW734APO 13 dBi Outdoor PoE Access Point User Manual ZCN 1523H 2 8

TRENDNET, Inc. 13 dBi Outdoor PoE Access Point ZCN 1523H 2 8

Contents

User Manual (for ferrite core )_ver01

Connect to the Access Point To be able to configure and manage the Access Point, please do the followings: 1. Open the ferrite core by unsnapping the connector latches. The core will open, revealing aconcave surface.2. Lay the Ethernet cable into the core, usually within 2 to 3 inches of the connector. You may haveto experiment with the final location depending on the effectiveness of the high frequencyabatement.3. Loop the cable around and through the core. This helps "lock" the core in place, and may berequired in circumstances with severe interference.4. Close the core and snap the halves back together.The ferrite is professionally installed and a shrink wrap has been put around the ferriteso the users CAN’T take the ferrite off. Note:
6. Connect the other end of Ethernet cable to a PC or a switch hub. The hardware installation iscomplete.5. Connect the Ethernet cable with suppression core to the “Data In” port of the PoE injector.

Navigation menu