TRENDNET TEW810DR AC750 Dual Band Wireless Router User Manual test 3

Download:
Mirror Download [FCC.gov]
Document ID	2093239
Application ID	JhYWuS3TiCA8ZbMeYXjmSA==
Document Description	User Manual.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	149.64kB (1870516 bits)
Date Submitted	2013-10-17 00:00:00
Date Available	2013-10-17 00:00:00
Creation Date	2013-09-26 17:31:24
Producing Software	Adobe PDF Library 10.0
Document Lastmod	2013-10-08 19:38:45
Document Title	test 3
Document Creator	Acrobat PDFMaker 10.0 for Word
Document Author:	Jonathan

TRENDnet User’s Guide
Cover Page
TRENDnet User’s Guide
Table of Contents
Table of Contents ............................................................................2
Product Overview ...........................................................................4
Package Contents .......................................................................................................... 4
Features ......................................................................................................................... 4
Product Hardware Features........................................................................................... 5
Application Diagram ...................................................................................................... 6
Router Setup ...................................................................................7
Creating a Home Network ............................................................................................. 7
Router Installation ......................................................................................................... 8
Connect additional wired devices to your network..................................................... 10
Wireless Networking and Security ................................................. 11
Table of contents
Website Filter .................................................................................................... 22
Inbound Filter .................................................................................................... 22
ADVANCED ................................................................................... 23
Change your router IP address .................................................................................... 23
Set up the DHCP server on your router ....................................................................... 23
Set up DHCP reservation ............................................................................................. 24
Manually configure your Internet connection ............................................................ 25
Manually configure your DNS server setting ............................................................... 25
Manually configure your MTU setting ......................................................................... 26
Clone a MAC address ................................................................................................... 26
Add static routes to your router .................................................................................. 27
Enable RIP on your router ........................................................................................... 27
IPv6 Internet Connection Settings ............................................................................... 28
How to choose the type of security for your wireless network .................................. 11
Prioritize traffic using QoS (Quality of Service) ........................................................... 29
Secure your wireless network ..................................................................................... 12
Advanced wireless settings ......................................................................................... 29
Connect wireless devices to your router ..................................................................... 13
Multiple SSID ..................................................................................................... 29
Wireless bridging using WDS (Wireless Distribution System) ........................... 30
Additional wireless settings ............................................................................... 31
Wireless security (Wireless MAC filter) ............................................................. 33
Connect wireless devices using WPS ........................................................................... 14
Basic ............................................................................................. 15
Access your router management page ........................................................................ 15
Set your router date and time ..................................................................................... 33
Network Status ............................................................................................................ 16
Create schedules ......................................................................................................... 34
Wireless settings .......................................................................................................... 17
Open a device on your network to the Internet.......................................................... 35
Guest Network ............................................................................................................. 18
DMZ ................................................................................................................... 35
Virtual Server ..................................................................................................... 35
Special Applications ........................................................................................... 36
Gaming............................................................................................................... 37
Steps to improve wireless connectivity ....................................................................... 19
Parental Control........................................................................................................... 19
Access Control Filters .................................................................... 20
Access control basics ................................................................................................... 20
Service and Port blocking................................................................................... 20
IP blocking .......................................................................................................... 21
Enable/disable Application Layer Gateways (ALG) ...................................................... 38
Enable/disable UPnP on your router ........................................................................... 39
Router Maintenance & Monitoring ............................................... 39
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Change your router login password ............................................................................ 39
Table of contents
Appendix ...................................................................................... 54
Change your device name ........................................................................................... 40
Change your device URL .............................................................................................. 40
Identify your network on the Internet......................................................................... 41
Allow remote access to your router management page ............................................. 42
Reset your router to factory defaults .......................................................................... 42
Router Default Settings ............................................................................................... 43
Backup and restore your router configuration settings .............................................. 43
Upgrade your router firmware .................................................................................... 44
Reboot your router ...................................................................................................... 45
Allow/deny ping requests to your router from the Internet ....................................... 46
Check the router system information.......................................................................... 46
Router Management Page Structure ............................................. 50
Technical Specifications................................................................. 51
Troubleshooting ............................................................................ 53
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-810DR
TRENDnet User’s Guide
Product Overview
networks—a high speed 433 Mbps Wireless AC network and a 300 Mbps Wireless N
network to connect common wireless devices.
Ease of Use
Easy Setup
Get up and running in minutes with the intuitive guided setup
One Touch Connection
Securely connect to the router at the touch of the Wi-Fi Protected Setup
(WPS) button
Security
TEW-810DRU
Package Contents
In addition to your router, the package includes:
•
•
•
•
CD-ROM (Utility and User’s Guide)
Multi-Language Quick Installation Guide
Network cable Ethernet Cable (1.5m / 5ft.)
Power Adapter (12V, 1A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
Designed to handle multiple HD streams in a busy connected home, TRENDnet’s AC750
Dual Band Wireless Router, model TEW-810DR, creates two concurrent wireless
Encrypted Wireless
For your security the router arrives pre-encrypted with its own unique
password
Guest Network
Create a secure, isolated network for guest internet access only
Parental Controls
Control access to specific websites or types of content
Performance
Next Generation Wireless AC
802.11ac provides uninterrupted HD video streaming in a busy connected
home
Simultaneous Dual Band
High speed 433 Mbps Wireless AC band + 300 Mbps Wireless N
Ethernet Ports
Ethernet ports maintain high performance network connections
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-810DR
TRENDnet User’s Guide
Backward Compatible
Compatible with Wireless N and older Wireless G devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
Product Hardware Features
Rear View
*For maximum performance of up to 433 Mbps use with at least a 433 Mbps 802.11ac
wireless adapter. Maximum wireless signal rates are referenced from IEEE 802.11
theoretical specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
LAN Ports 1-4
Internet Port
Reset Button
WPS Button
Power Port
On/Off Power Switch
• LAN Ports 1-4: Connect Ethernet cables (also called network cables) from your
router LAN ports to your wired network devices.
• Internet Port: Connect an Ethernet cable from your router Internet port to your
modem.
• Reset Button: Press and hold this button for 10 seconds to reset the router.
• On/Off Power Switch: Push the router On/Off power switch to turn your router
“On” (Inner position) or “Off” (Outer position).
• Power Port: Connect the included power adapter from your router power port and
to an available power outlet.
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-810DR
TRENDnet User’s Guide
Application Diagram
Front View
Power LED
Internet LED
Power/WPS LED: The indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router. The
indicator will also blink when WPS is activated. The LED will stop blinking and
remain solid green automatically once WPS process is completed.
The router is installed near the modem (typically supplied by your ISP “Internet Service Provider”)
and physically connected to it from the router’s Internet port to the modem’s network port which
connects to the Internet. 2.4GHz wireless signals from the router are broadcasted to wireless
clients such as laptops (with wireless capability) and the less congested 5GHz wireless signals from
the router are broadcasted to other wireless client devices such as TVs, game consoles, or media
bridges thereby providing Internet access for all wireless client devices.
Internet Port (Link/Activity) LED – This LED indicator is solid green when your
router Gigabit Internet port is physically connected to the modem network or
Ethernet port with a network or Ethernet cable (modem turned on). The LED
indicator will be blinking green while data is transmitted or received through the
Gigabit Internet port of your router.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-810DR
TRENDnet User’s Guide
Router Setup
Creating a Home Network
4. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 10.
5. To set up wireless security on your router, see “Wireless Networking and Security” on
page 11.
What is a network?
How to setup your router
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 8 for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
• http://www.trendnet.com/support (documents, downloads, and FAQs are
available from this Web page)
• Modem – Connects a computer or router to the Internet or ISP (Internet Service
Provider).
• Router – Connects multiple devices to the Internet.
• Switch –Connect several wired network devices to your home network. Your
router has a built-in network switch (the LAN port 1-4). If you have more wired
network devices than available Ethernet ports on your router, you will need an
additional switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
• Computers/devices with an Ethernet port (also called network port) or wireless
networking capabilities.
• A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
• A router to connect multiple devices to the Internet.
2. Make sure that your modem is working properly. Your modem is often provided by
your Internet Service Provider (ISP) when you sign up for Internet service. If your
modem is not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-810DR
TRENDnet User’s Guide
Router Installation
Before you Install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process, come
back to this page and contact your ISP to verify required ISP specification fields listed
below.
1. Obtain IP Address Automatically (DHCP)
Host Name (Optional)
MAC Address: ___:___:___:___:___:___ Enter your PC’s MAC address (Optional)
DNS Servers Address 1: _____. _____._____._____ (Optional)
DNS Servers Address 2: _____. _____._____._____ (Optional)
2. Static/Fixed IP address
MAC Address: ___:___:___:___:___:___ Enter your PC’s MAC address (Optional)
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____
Default Gateway IP Address: _____. _____._____._____
DNS Servers Address 1: _____. _____._____._____
DNS Servers Address 2: _____. _____._____._____
4. PPTP
Type (Dynamic IP/DHCP or Static IP)
PPTP Server: _____________________ (IP address)
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____
Default Gateway:_____. _____._____._____
Server IP: _____. _____._____._____
DNS Servers Address 1: _____. _____._____._____
DNS Servers Address 2: _____. _____._____._____
User Name: _________
Password: ________________
5. L2TP
Type (Dynamic IP/DHCP or Static IP)
L2TP Server: _____________________ (IP address)
IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____
Default Gateway:_____. _____._____._____
Server IP: _____. _____._____._____
DNS Servers Address 1: _____. _____._____._____
DNS Servers Address 2: _____. _____._____._____
User Name: _________
Password: ________________
3. PPPoE to obtain IP automatically
User Name: _________
Password: ________________
© Copyright 2013 TRENDnet. All Rights Reserved.
TEW-810DR
TRENDnet User’s Guide
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
4. Connect your modem to the router Internet port (yellow).
5. Connect your computer to one of the router LAN ports.
Internet Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
the installation wizard will automatically open. If the wizard does not appear, type
http://tew-810dr into the address bar of your web browser and press enter. Enter
your User Name and Password, click Login and then click Advanced > Setup > Wizard.
Note: You can also access the device using the default IP address
(http://192.168.10.1).
2. Select your language and click next to start the installation wizard.
6. Connect the power adapter to the router and then to a power outlet.
7. Press the power on / off switch of the router and turn on your modem.
8. Verify that the status LED indicators on the front of the router are illuminated: Power,
Internet.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-810DR
3. The router will detect your internet connection type.
Connect additional wired devices to your network
You can connect additional computers or other network enabled devices to your
network by using Ethernet cables to connect them to one of the available LAN ports
labeled 1,2,3,4 on your router. Check the status of the LED indicators (1, 2, 3, or 4) on
the front panel of your router to ensure the physical cable connection from your
computer or device.
4. Once complete the installation wizard is completed, the wizard will display your
router’s settings. Click Save to apply settings and continue. Click Print if you would like
to print your settings for future reference.
Note: If you encounter issues connecting to your network, there may be a problem with
your computer or device network settings. Please ensure that your computer or device
network settings (also called TCP/IP settings) are configured to obtain IP address settings
automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server
address settings automatically.
2. Select your language and click next to start the installation wizard.
5. Open a different web browser window to verify you have Internet connection.
6. For added security, the router is pre-encrypted with its own unique wireless network
security key. You can find the unique network security key and pre-assigned network
name (SSID) on a sticker on the front of the router and on a label on the bottom of the
router. If you would like to change the wireless settings, continue to the next page to
launch the wireless setup wizard.
© Copyright 2013 TRENDnet. All Rights Reserved.
10
TEW-810DR
TRENDnet User’s Guide
Wireless Networking and Security
How to choose the type of security for your wireless network
Setting up wireless security is very important. Leaving your wireless network open and
unsecure could expose your entire network and personal files to outsiders. TRENDnet
recommends reading through this entire section and setting up wireless security on your
new router.
There are a few different wireless security types supported in wireless networking each
having its own characteristics which may be more suitable for your wireless network
taking into consideration compatibility, performance, as well as the security strength
along with using older wireless networking hardware (also called legacy hardware).
It is strongly recommended to enable wireless security to prevent unwanted users from
accessing your network and network resources (personal documents, media, etc.).
In general, it is recommended that you choose the security type with the highest
strength and performance supported by the wireless computers and devices in your
network. Please review the security types to determine which one you should use for
your network.
Wireless Encryption Types
• WEP: Legacy encryption method supported by older 802.11b/g hardware. This is
the oldest and least secure type of wireless encryption. It is generally not
recommended to use this encryption standard, however if you have old 802.11 b or
802.11g wireless adapters or computers with old embedded wireless cards(wireless
clients), you may have to set your router to WEP to allow the old adapters to
connect to the router.
Note: This encryption standard will limit connection speeds to 54Mbps.
• WPA: This encryption is significantly more robust than the WEP technology. Much
of the older 802.11g hardware was been upgraded (with firmware/driver upgrades)
to support this encryption standard. Total wireless speeds under this encryption
type however are limited to 54Mbps.
• WPA-Auto: This setting provides the router with the ability to detect wireless
devices using either WPA or WPA2 encryption. Your wireless network will
automatically change the encryption setting based on the first wireless device
connected. For example, if the first wireless client that connects to your wireless
network uses WPA encryption your wireless network will use WPA encryption. Only
when all wireless clients disconnect to the network and a wireless client with WPA2
encryption connects your wireless network will then change to WPA2 encryption.
Note: WPA2 encryption supports 802.11n speeds and WPA encryption will limit
your connection speeds to 54Mbps
• WPA2: This is the most secure wireless encryption available today, similar to WPA
encryption but more robust. This encryption standard also supports the highest
connection speeds. TRENDnet recommends setting your router to this encryption
standard. If you find that one of your wireless network devices does not support
WPA2 encryption, then set your router to either WPA or WPA-Auto encryption.
Note: Check the specifications of your wireless network adapters and wireless
appliances to verify the highest level of encryption supported. Below is brief
comparison chart of the wireless security types and the recommended
configuration depending on which type you choose for your wireless network.
Security Standard
Compatible
Wireless
Standards
Highest
Performance
Under This
Setting
Encryption
Strength
Additional
Options
Recommended
Configuration
WEP
WPA
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this
standard)
IEEE 802.11a/b/g/n
Up to 54Mbps
Up to 54Mbps
Up to 450Mbps (11n)
and up to 1.3Gbps
(11ac)*
Low
Open System or
Shared Key,
HEX or ASCII,
Different key sizes
Medium
High
TKIP or AES,
Preshared Key or
RADIUS
TKIP or AES,
Preshared Key or
RADIUS
TKIP
Preshared Key
8-63 characters
AES
Preshared Key
8-63 characters
IEEE 802.11a/b/g
(802.11n devices
will operate at
802.11g to connect
using this standard)
Open System ASCII
13 characters
WPA2
*Dependent on the maximum 802.11n/ac data rate supported by the device (150Mbps,
300Mbps, 450Mbps, 867Mbps, or 1.3Gbps)
© Copyright 2013 TRENDnet. All Rights Reserved.
11
TEW-810DR
TRENDnet User’s Guide
Secure your wireless network
Wireless (2.4GHz or 5GHz)> Security
Note: It is recommended to use WEP-OPEN because it is known to be more secure than
Shared Key.
After you have determined which security type to use for your wireless network (see
“How to choose the security type for your wireless network” on page 11), you can set up
wireless security.
1. Log into your router management page (see “Access your router management page”
on page 16).
2. Click on the Wireless button.
3. Underneath the basic wireless band section, you will see Security Mode. Click on the
drop-down list to select your wireless security type.
• Current Network Key - You can define up to 4 keys however, only one key can be
active at any given time. Most users simply define one key. Click the drop-down list
to select which of the 4 keys is the active key.
• Network Key 1-4
o This is where you enter the WEP key needed for a computer to connect to the
router wirelessly
o You can define up to 4 passwords or 4 keys. Only one key can be active at a given
time. Most users simply define one key.
o Choose a key index 1, 2, 3, or 4 and enter the key.
o When connecting to the router, the client must match both the password and the
Key number. (e.g. if you have activated Key 2 with a password of 12345, then the
client must select: Key 2 (entering Key 1, 3, or 4 will block the ability to connect)
and enter password 12345)
WEP Key Format
Selecting WEP-OPEN, WEP-SHARED:
If selecting WEP (Wired Equivalent Privacy), please review the WEP settings to configure
and click Apply to save the changes.
Note: WEP security is only available in the Security Mode list when 802.11 n-mode is
set to Off under Wireless (2.4GHz or 5GHz) > Basic.
Note: WPS functionality is not available when using WEP.
HEX
ASCII
Character set
0-9 & A-F, a-f only
Alphanumeric (a,b,C,?,*, /,1,2, etc.)
64-bit key length
10 characters
5 characters
128-bit key length
26 characters
13 characters
Note: It is recommended to use 128-bit format because it is more secure to use a
key that consists of more characters.
• Click here to display - Typically, the password characters are masked for security
purposes. This link displays actual characters of the currently assigned password for
your reference.
In the Security Mode drop-down list, select WEP-OPEN or WEP-SHARED.
© Copyright 2013 TRENDnet. All Rights Reserved.
12
TEW-810DR
TRENDnet User’s Guide
Selecting WPA-PSK, WPA2-PSK, WPA2-PSK, or Mixed (WPA2-PSK recommended):
In the Security Mode drop-down list, select WPA-.
The following section outlines options when selecting WPA-PSK, WPA2-PSK, or WPA2PSK Mixed (Preshared Key Protocol),
• WPA Encryption: Select a Cipher Type to use. When selecting WPA-PSK security, it
is recommended to use TKIP + AES.
o When selecting WPA2-PSK Mixed security, it is recommended to use TKIP+AES.
o When selecting WPA2-PSK security, it is recommended to use AES.
• WPA passphrase: Enter the passphrase.
o This is the password or key that is used to connect your computer to this router
wirelessly
Note: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.)
• Network Key Rotation Interval: Enter the time interval (seconds) of when the
network passphrase will rotate. Note: It is recommended to use the default
interval time. Your passphrase will not change, rotation of the key is part of the
WPA protocol and designed to increase security.
Selecting WPA, WPA2, or WPA2 Mixed:
The following section outlines options when selecting WPA. WPA2 or WPA2 Mixed
known as EAP (Extensible Authentication Protocol). Also known as called Remote
Authentication Dial-In User Service or RADIUS.
Note: This security type requires an external RADIUS server, PSK only requires you to
create a passphrase.
• RADIUS Server: Enter the IP address of the RADIUS server. (e.g. 192.168.10.250)
• RADIUS Port: Enter the port your RADIUS server is configured to use for RADIUS
authentication.
Note: It is recommended to use port 1812 which is typical default RADIUS port.
• RADIUS Key: Enter the shared secret used to authorize your router with your
RADIUS server.
Connect wireless devices to your router
A variety of wireless network devices can connect to your wireless network such as:
•
•
•
•
•
•
Gaming Consoles
Internet enabled TVs
Network media players
Smart Phones
Wireless Laptop computers
Wireless IP cameras
Each device may have its own software utility for searching and connecting to available
wireless networks, therefore, you must refer to the User’s Manual/Guide of your
wireless client device to determine how to search and connect to this router’s wireless
network.
See the “Appendix” on page 54 for general information on connecting to a wireless
network.
© Copyright 2013 TRENDnet. All Rights Reserved.
13
TEW-810DR
TRENDnet User’s Guide
Connect wireless devices using WPS
PBC (Software/Virtual Push Button)
WPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your
wireless network. If your wireless devices support WPS, you can use this feature to
easily add wireless devices to your network.
In addition to the hardware push button located physically on your router, the router
management page also has push button which is a software or virtual push button you
can click to activate WPS on your router.
Note: You will not be able to use WPS if you set the SSID Broadcast setting to Disabled or
if you are using WEP security.
There are two methods the WPS feature can easily connect your wireless devices to
your network.
• Push Button Configuration (PBC) method
o (RECOMMENDED) Hardware Push Button method–with an external button
located physically on your router and on your client device
o WPS Software/Virtual Push Button - located in router management page
• PIN (Personal Identification Number) Method - located in router management page
Note: Refer to your wireless device documentation for details on the operation of
WPS.
Wireless (2.4GHz or 5GHz)> WPS
1. Log into your router management page (see “Access your router management page”
on page 16).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on WPS.
Recommended Hardware Push Button (PBC) Method
• Note: It is recommended that a wireless key (passphrase or password) is created
before connecting clients using the PBC method. If no wireless key is defined when
connecting via PBC, the router will automatically create an encryption key that is 64
characters long. This 64 character key will then have to be used if one has to
connect computers to the router using the traditional connection method.
4. To add a wireless device to your network, simply click the Add Enrollee button in the
router management page, then push the WPS button on the wireless device (consult
wireless device’s User’s Guide for length of time) you are connecting.
To add a wireless device to your network, simply push the WPS button on the wireless
device you are connecting (consult client device User’s Guide for length of time), then
push and hold the WPS button located on your router for 3 seconds and release it. A
blue LED on your router WPS button will flash indicating that the WPS setup process has
been activated on your router. (See “Product Hardware Features” on page 5)
For connecting additional WPS supported devices, repeat this process for each
additional device.
© Copyright 2013 TRENDnet. All Rights Reserved.
14
TEW-810DR
TRENDnet User’s Guide
PIN (Personal Identification Number)
Wireless (2.4GHz or 5GHz)> WPS
If your wireless device has WPS PIN (typically an 8-digit code printed on the wireless
device product label or located in the wireless device wireless software utility), you can
use this method.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on WPS.
Basic
Access your router management page
Note: Your router management page URL/domain name http://tew-810dr or IP address
http://192.168.10.1 is accessed through the use of your Internet web browser (e.g.
Internet Explorer, Firefox, Chrome, Safari, Opera) and will be referenced frequently in
this User’s Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to URL/domain name http://tew-810dr or IP address http://192.168.10.1. Your
router will prompt you for a user name and password.
2. For added security, the router is preconfigured with a unique password. You can find
the Password on a sticker on the side of the router and on the label on the bottom of
the router.
4. Next to Station PIN, enter the WPS PIN of the wireless device you are connecting and
click the Add Enrollee button.
Note: You may need to initiate the WPS PIN on your wireless device first when using
this method. Refer to your wireless device documentation for details on the
operation of WPS.
3. Enter your Username and Password, select your preferred language, then click Login.
© Copyright 2013 TRENDnet. All Rights Reserved.
15
TRENDnet User’s Guide
TEW-810DR
Internet: This icon turns green to indicate that your network has a valid
Internet connection. Amber color indicates a physical connection on the
Internet port of the router but with no valid Internet connection. Red color
indicates disconnected Internet port.
Guest Network: The section provides your router’s guest network SSID. This
icon turns green to indicate when your router’s wireless network is enabled.
Red color indicates your router’s wireless network is disabled.
• User Name: admin
• Password: (xxxxxxxx)
Note: User Name and Password are case sensitive.
Network Status
This screen appears when you login into your router. This section provides an over view
of your router.
Wireless: This icon turns green to indicate when your router’s wireless
network is enabled. Red color indicates your router’s wireless network is
disabled.
Security: This section provides your router’s wireless network security
information.
Connected Devices: This section provides information of all connected
devices on your router.
© Copyright 2013 TRENDnet. All Rights Reserved.
16
TRENDnet User’s Guide
Wireless settings
Wireless (2.4GHz or 5GHz)> Basic
This section outlines available management options under basic wireless sub tab for
both 2.4GHz and 5GHz wireless sections.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on Wireless and under the Basic tab.
3. To save changes to this section, click Apply when finished.
• Radio On/Off:
o On: Turns on wireless radio.
o Off: Turns off wireless radio.
o Schedule: Select the schedule rule you would like to apply to your wireless
network. (See “Create Schedule” section on page 34).
• Wireless Mode
o Auto: Select this option if you have non-802.11n wireless clients (802.11a/b/g)
connecting to your wireless network.
o Off: The router will operate in 802.11n mode only, non-802.11n wireless clients
will not be able to connect when this option is selected.
When applying the 802.11 n-mode setting on 2.4GHz, please keep in mind the following:
• Wireless devices that support 802.11n are backwards compatible and can connect
wirelessly at 802.11g or 802.11b.
TEW-810DR
• Connecting at 802.11b or 802.11g will limit the capability of your 802.11n
supported wireless devices from obtaining higher performance and data rates.
• Allowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless
network may degrade the wireless network performance below the higher
performance and data rates of 802.11n.
• Wireless devices that only support 802.11b or 802.11g will not be able to connect
to a wireless network that is set to 802.11n only mode.
• Wireless devices that only support 802.11b will not be able to connect to a wireless
network that is set to 802.11g only mode.
• Wireless Name (SSID): Enter the wireless name (SSID) for your wireless network.
This acronym stands for Service Set Identifier and is the name of your wireless
network. It differentiates your wireless network from others around you. By
default, the router’s wireless name is unique to the device. If you choose to change
the SSID, change it to a name that you can easily remember.
• Broadcast Network Name (SSID):
o Enabled allows wireless devices to search and discover your wireless network
name (also called SSID) broadcasted by your router.
o Disabled turns off the ability for wireless devices to find your network. It is still
possible for wireless devices to be configured to connect to your wireless
network. Disabling this setting will disable WPS functionality.
• Frequency (Channel): To manually set the channel on which the router will
broadcast, click the drop-down list and select the desired Channel for wireless
communication. The goal is to select the Channel that is least used by neighboring
wireless networks.
• Channel Bandwidth: Select the appropriate channel width for your wireless
network. This setting only applies to 802.11n and 802.11ac. For greater 802.11n
performance in 2.4GHz, select 40MHz (Options: 20MHz or 40MHz). For greater
802.11ac performance in 5GHz, select 80MHz (Options: 20MHz, 40MHz, or 80MHz)
It is recommended to use the default channel bandwidth settings.
Note: Please note that this setting may provide more stability than the higher
channel bandwidth settings such as 40 MHz or 80MHz for connectivity in busy
wireless environments where there are several wireless networks in the area.
o 20 MHz: This mode operates using a single 20MHz channel for wireless devices
connecting at 802.11n on both 2.4GHz and 5GHz. This setting may provide more
stability than 40MHz or 80MHz for connectivity in busy wireless environments
where there are several neighboring wireless networks in the area.
o Auto 20/40 MHz (2.4GHz wireless) or Auto 20/40/80 MHz (5GHz wireless):
When 40MHz or 80MHz is active, this mode is capable of providing higher
© Copyright 2013 TRENDnet. All Rights Reserved.
17
TRENDnet User’s Guide
performance only if the wireless devices support the channel bandwidth settings.
Enabling 40MHz or 80MHz typically results in substantial performance increases
when connecting an 802.11n or 802.11ac client. Note: Please note that 80MHz
channel bandwidth is only available for 802.11ac 5GHz.
Guest Network
Wireless (2.4GHz or 5GHz) > Guest Network
Creating an isolated and separate wireless guest network (2.4GHz or 5GHz) allows
wireless clients to connect to your network for Internet access only and keep your local
LAN network safe by restricting guest access to your LAN network resources such as
shared documents and media files on your computers, network storage, and printers.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Basic tab.
TEW-810DR
• Radio On/Off:
o On: Turns on wireless radio.
o Off: Turns off wireless radio.
o Schedule: Select the schedule rule you would like to apply to your wireless
network. (See “Create Schedule” section on page 34).
• Wireless Name (SSID): This acronym stands for Service Set Identifier and is the
name of your wireless network. It differentiates your wireless network from others
around you. It is recommended to use a different name from your primary wireless
network to a name that you can easily identify and differentiate from the primary.
You can reference your guests to access this network instead of the primary.
• WLAN Partition: Enabling this option will restrict guests from communicating with
each other over the guest network such as share files.
• Internet Access Only: By default, the option is checked to allow guests to only
access the Internet and restrict access to your local LAN network. Please note that
unchecking this option will open access to local LAN network to guests.
5. Apply wireless security to your guest network (see “How to choose the type of
security for your wireless network” on page 11).
3. Click on Guest Network section.
4. Review the Guest Network settings, click Apply when finished.
© Copyright 2013 TRENDnet. All Rights Reserved.
18
TEW-810DR
TRENDnet User’s Guide
Steps to improve wireless connectivity
There are a number of factors that can impact the range of wireless devices. Follow
these tips to help improve your wireless connectivity:
1. Keep the number of obstructions to a minimum. Each obstruction can reduce the
range of a wireless device. Position the wireless devices in a manner that will
minimize the amount of obstructions between them.
a. For the widest coverage area, install your router near the center of your home,
and near the ceiling, if possible.
b. Avoid placing the router on or near metal objects (such as file cabinets and
metal furniture), reflective surfaces (such as glass or mirrors), and masonry
walls.
c. Any obstruction can weaken the wireless signal (even non-metallic objects), so
the fewer obstructions between the router and the wireless device, the better.
d. Place the router in a location away from other electronics, motors, and
fluorescent lighting.
e. Many environmental variables can affect the router’s performance, so if your
wireless signal is weak, place the router in several locations and test the signal
strength to determine the ideal position.
2. Building materials can have a large impact on your wireless signal. In an indoor
environment, try to position the wireless devices so that the signal passes through
less dense material such as dry wall. Dense materials like metal, solid wood, glass
or even furniture may block or degrade the signal.
3. Antenna orientation can also have a large impact on your wireless signal. Use the
wireless adapter’s site survey tool to determine the best antenna orientation for
your wireless devices.
4. Interference from devices that produce RF (radio frequency) noise can also impact
your signal. Position your wireless devices away from anything that generates RF
noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device
uses an older standard, the performance of the entire wireless network may be slower.
If you are still experiencing low or no signal consider repositioning the wireless devices,
installing additional access points or wireless extenders.
Parental Control
This section allows you to setup and block specific network clients from access certain
webpage, similar to URL filter.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Basic tab.
3. Click on the Parental Control section.
4. Review the household access rule section and click Add to continue.
• Rule Enable: Check this option to enable the rule.
• Rule Name: Enter the name of that you would like to apply to the rule.
• Address Type: Select the type of address you would like to use, IP address or MAC
address.
• IP Address: Enter your client’s address.
• Schedule: Select the schedule rule you would like to apply to your wireless network.
(See “Create Schedule” section on page 34).
© Copyright 2013 TRENDnet. All Rights Reserved.
19
TEW-810DR
TRENDnet User’s Guide
5. Select the website filter you would like to use.
3. Click on the Security section and click on Access Control.
• Disable: Select this option if you would like to disable website filter.
• DENY: Select this option to deny only website listed.
• ALLOW: Select this option to allow only website listed.
6. Select the website filter you would like to use.
4. Select enable next Enable Access Control to open the access control features. Click
Apply to save changes.
•
•
•
•
Rule Enable: Check this potion to enable URL rule
Rule Name: Enter the name of the URL rule
URL: Enter the URL to apply to the rule
Schedule: Click the drop-down list to select the pre-defined schedule to apply. The
filter will only be active during the time period defined in the pre-defined schedule.
(See “Create Schedule” section on page 34).
Access Control Filters
Service and Port blocking
Advanced > Security > Access Control
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
Access control basics
Advanced > Security > Access Control
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see “Access your router management page”
on page 15).
3. Click on the Security section and click on Access Control.
2. Click on the Advanced tab.
© Copyright 2013 TRENDnet. All Rights Reserved.
20
TEW-810DR
TRENDnet User’s Guide
4. Review the settings under LAN Client Filter Rules section. Click Apply to save settings.
IP blocking
Advanced > Security > Access Control
You may want to block certain IP addresses or a range of IP address access to your
network.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• Enable: Click to enable rule.
• Policy Name: Enter the name of the rule you would like to assign.
• Schedule: Select the defined schedule you would like to have the rule to be applied
(see “Create Schedule” section on page 34).
• Client IP Address: Enter the IP addresses or IP range to apply the rule.
• Rule Define: Select the rule type.
3. Click on the Security section and click on Access Control.
o Special Services: Select this option to select predefined services.
4. Review the settings under LAN Client Filter Rules section. Click Apply to save settings.
o User Define: Select this option to manually assign the TCP and UDP ports
• Enable: Click to enable rule.
© Copyright 2013 TRENDnet. All Rights Reserved.
21
TEW-810DR
TRENDnet User’s Guide
• Rule Name: Enter the name of the rule you would like to assign.
• LAN IP Address Range: Enter the IP address or IP address range to apply the
protocol (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30).
Note: The filter will not be applied to IP addresses outside of the range specified.
• Schedule: Select the defined schedule you would like to have the rule to be applied
(see “Create Schedule” section on page 34).
5. Review the website rule settings and click Apply to save changes.
Website Filter
Advanced > Security > Access Control
You may want to allow or block computers or devices on your network access to specific
websites (e.g. www.trendnet.com, etc.), also called domains or URLs (Uniform Resource
Locators). You may also enter a keyword (e.g. instead of complete URL to generally
allow or block computers or devices access to websites that may contain the keyword in
the URL or on the web page.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
•
•
•
•
Rule Enable: Check this potion to enable URL rule
Rule Name: Enter the name of the URL rule
URL: Enter the URL to apply to the rule
Schedule: Click the drop-down list to select the pre-defined schedule to apply. The
filter will only be active during the time period defined in the pre-defined schedule.
(See “Create Schedule” section on page 34).
Inbound Filter
Advanced > Security > Inbound Filter
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Security section and click on Access Control.
3. Click on the Security section and click on Access Control.
4. Select to ALLOW or DENY websites listed.
4. Review the inbound filter settings and click Apply to save changes.
© Copyright 2013 TRENDnet. All Rights Reserved.
22
TEW-810DR
TRENDnet User’s Guide
• Rule Name: Enter the name of the URL rule
• Rule Action: Select the action you would like to apply to the rule.
• IP Address: Enter the IP address you would like to apply the rule.
ADVANCED
Change your router IP address
4. In LAN Interface Setting section, Enter the router IP address settings. Click Apply to
save settings.
Note: The DHCP address range will change automatically to your new router IP
address settings so you do not have to change the DHCP address range manually to
match your new router IP address settings.
Advanced > Setup > LAN Setting
In most cases, you do not need to change your router IP address settings. Typically, the
router IP address settings only needs to be changed, if you plan to use another router in
your network with the same IP address settings, if you are connecting your router to an
existing network that is already using the IP address settings your router is using, or if
you are experiencing problems establishing VPN connections to your office network
through your router.
Note: If you are not encountering any issues or are not faced with one of the cases
described above or similar, it is recommended to keep your router IP address
settings as default.
Default Router IP Address: 192.168.10.1
Default Router Network: 192.168.10.0 / 255.255.255.0
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on LAN Setting.
• IP Address: Enter the new router IP address. (e.g. 192.168.200.1)
• Subnet Mask: Enter the new router subnet mask. (e.g. 255.255.255.0)
• MAC Address: Displays your router’s MAC address
Note: You will need to access your router management page using your new
router IP address. (e.g. Instead of using the default http://192.168.10.1 your new
router IP address will use the following format using your new IP address
http://(new.ipaddress.here) to access your router management page. You can
also use the default login URL http://tew-810dr
Set up the DHCP server on your router
N Advanced > Setup > LAN Setting
Your router can be used as a DHCP (Dynamic Host Configuration Protocol) server to
automatically assign an IP address to each computer or device on your network. The
DHCP server is enabled by default on your router. If you already have a DHCP server on
your network, or if you do not want to use your router as a DHCP server, you can disable
this setting. It is recommended to leave this setting enabled.
© Copyright 2013 TRENDnet. All Rights Reserved.
23
TEW-810DR
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
or device will renew the IP address lease with the DHCP server, otherwise, if there is
no attempt to renew the lease, the DHCP server will reallocate the IP address to be
assigned to another computer or device.
Set up DHCP reservation
Network > LAN Setting
3. Click on the Setup section and click on LAN Setting.
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
“Virtual Server” on page 35) or special applications (also called port triggering, see
“Special Applications” on page 36).
1. Log into your router management page (see “Access your router management page”
on page 15).
3. Review the DHCP Server settings. Click Apply to save settings.
2. Click on the Advanced tab.
3. Click on the Setup section and click on LAN Setting.
• DHCP Server: Enable or Disable the DHCP server.
• DHCP Start IP: Changes the starting address for the DHCP server range.
(e.g.192.168.10.20)
• DHCP End IP: Changes the last address for the DHCP server range. (e.g.
192.168.10.30)
Note: The Start IP and End IP specify the range of IP addresses to automatically
assign to computers or devices on your network.
• DHCP Lease Time: Enter in minutes the DHCP lease time you would like to apply.
Note: The DHCP lease time is the amount of time a computer or device can keep an
IP address assigned by the DHCP server. When the lease time expires, the computer
3. Review the DHCP reservation settings. Click Apply to save settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
24
TEW-810DR
TRENDnet User’s Guide
4. In the WAN Connection Type drop-down list, click the type of Internet connection
provided by your Internet Service Provider (ISP).
• Enable: Check the box to enable DHCP reservation rule.
• Computer Name: Enter a name of the device you will assign the DHCP reservation
rule or select your device from the pull down menu.
• IP Address: Enter the IP address to assign to the reservation. (e.g. 192.168.10.101)
• MAC Address: Enter the MAC (Media Access Control) address of the computer or
network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)
• Copy your PC’s MAC: Click this option to copy’s your computer’s MAC address to
the MAC address field.
Manually configure your Internet connection
Advanced > Setup > WAN Setting
1. Log into your router management page (see “Access your router management page”
on page 15).
5. Complete the fields required by your ISP.
6. Complete the optional settings only if required by your ISP.
7. To save changes, click Apply.
Note: If you are unsure which Internet connection type you are using, please contact
your ISP.
Manually configure your DNS server setting
Advanced > Setup > WAN Setting
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
2. Click on the Advanced tab.
3. Click on the Setup section and click on WAN Setting.
3. Click on the Setup section and click on WAN Setting.
© Copyright 2013 TRENDnet. All Rights Reserved.
25
TEW-810DR
TRENDnet User’s Guide
4. Enter both Primary and Secondary DNS servers to use. Click Apply to save settings.
Clone a MAC address
Advanced > Setup > WAN Setting
Note: If you are unsure which DNS to use, please contact your ISP.
Manually configure your MTU setting
Advanced > Setup > WAN Setting
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on WAN Setting.
On any home network, each network device has a unique MAC (Media Access Control)
address. Some ISPs register the MAC address of the device (usually a router or a
computer) connected directly to the modem. If your computer MAC address is already
registered with your ISP and to prevent the re-provisioning and registration process of a
new MAC address with your ISP, then you can clone the address (assign the registered
MAC address of your previous device to your new router). If you want to use the MAC
address from the previous device (computer or old router that directly connected to the
modem, you should first determine the MAC address of the device or computer and
manually enter it into your router using the clone MAC address feature.
Note: For many ISPs that provide dynamic IP addresses automatically, typically, the
stored MAC address in the modem is reset each time you restart the modem. If you
are installing this router for the first time, turn your modem before connecting the
router to your modem. To clear your modem stored MAC address, typically the
procedure is to disconnect power from the modem for approximately one minute,
then reconnect the power. For more details on this procedure, refer to your
modem’s User Guide/Manual or contact your ISP.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on WAN Setting.
4. Under “Use Default MTU Setting select Disable to manually enter your MTU setting.
Note: If you are unsure which DNS to use, please contact your ISP.
© Copyright 2013 TRENDnet. All Rights Reserved.
26
TEW-810DR
TRENDnet User’s Guide
4. Next to MAC Clone select Enable on the pull down menu. Manually enter you MAC
address or click Copy Your PC’s MAC address to copy your computer’s MAC address.
Note: You can check the DHCP Client List for the MAC addresses of the devices on
your network, see page 36 or refer to your computer or device documentation to
find the MAC address.
4. Review the LAN/WAN Static Routes section. Click Apply to save settings.
Add static routes to your router
Advanced > Setup > Routing
You may want set up your router to route computers or devices on your network to
other local networks through other routers. Generally, different networks can be
determined by the IP addressing assigned to those networks. Generally speaking and for
the case of an example, your network may have 192.168.10.x IP addressing and another
network may have 192.168.20.x IP addressing and because the IP addressing of these
two networks are different, they are separate networks. In order to communicate
between the two separate networks, static routing needs to be configured. Below is an
example diagram where routing is needed for devices and computers on your network
to access the other network.
Note: Configuring this feature assumes that you have some general networking
knowledge.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• Destination IP Address: Enter the IP network address of the destination network
for the route. (e.g. 192.168.20.0)
• Destination IP Netmask: Enter the subnet mask of the destination network for the
route. (e.g. 255.255.255.0)
• Gateway: Enter the gateway to the destination network for the route.
(e.g. 192.168.10.2)
• Metric: Enter the metric or priority of the route. The metric range is 1-15, the
lowest number 1 being the highest priority. (e.g. 1 )
• Interface: Select WAN on the pull down menu.
Enable RIP on your router
Advanced > Setup > Routing
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on Routing.
© Copyright 2013 TRENDnet. All Rights Reserved.
27
TEW-810DR
TRENDnet User’s Guide
Note: In order to use IPv6 Internet connection settings, it is required that your ISP
provide you with the IPv6 service. Please contact your ISP for availability and more
information about the IPv6 service.
3. Click on the Setup section and click on Routing.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on IPv6 Setting.
4. Review the LAN/WAN Static Routes section. Click Apply to save settings.
• Enable RIP: Select Enable on the pull down to enable RIP
• RIP mode: Select the RIP version to use.
4. Review the IPv6 Internet Connection settings and enter information settings specified
by your ISP.
IPv6 Internet Connection Settings
Advanced > Setup > IPv6 Setting
IPv6 (Internet Protocol Version 6) is a new protocol that significantly increases the
number of available Internet public IP addresses due to the 128-bit IP address structure
versus IPv4 32-bit address structure. In addition, there are several integrated
enhancements compared to the most commonly used and well known IPv4 (Internet
Protocol Version 4) such as:
•
•
•
•
Integrated IPsec – Better Security
Integrated Quality of Service (QoS) – Lower latency for real-time applications
Higher Efficiency of Routing – Less transmission overhead and smaller routing tables
Easier configuration of addressing
• IPv6 Connection Type: Select your IPv6 connection.
o 6to4: 6to4 is provided as a transitional mechanism for migrating from IPv4 to
IPv6. It allows IPv6 packets to be transmitted over an IPv4 network through the
automatic tunneling technology and routes traffic between 6to4 and IPv6
networks.
© Copyright 2013 TRENDnet. All Rights Reserved.
28
TEW-810DR
TRENDnet User’s Guide
o Native IPv6 only: Native IPv6 refers to a network where IPv6 is the only transport
protocol.
o 6to4 + Native IPv6: Supports 6to4 and Native IPv6 simultaneously.
• LAN Network Prefix: Enter the LAN Network Prefix here. This can be based on ULA
(Unique Local Address).
• DNS server: IPv6 DNS address will be provided by your local ISP.
• 6to4 subnet ID: Specifies, in hexadecimal notation, a subnet ID other than 0
• Enable QoS: Enable or Disable the Quality of service through the router.
• Upload Bandwidth: Select your upload bandwidth on the pull down menu.
Prioritize traffic using QoS (Quality of Service)
Advanced wireless settings
Advanced > Setup > QoS
The advanced wireless features provide can provide you with additional options for
setting up your wireless network such as multiple SSID and WDS (Wireless Distribution
System) or wireless bridging.
You may want to prioritize traffic for specific computers or devices on your network to
have higher priority. QoS involves prioritization of network traffic. QoS can be targeted
at a network interface, toward a given server or router's performance, or in terms of
specific applications.
Multiple SSID
Advanced > Wireless (2.4GHz or 5GHz) > Multiple SSID
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on IPv6 Setting.
The multiple SSID feature allows you to broadcast up to 2 additional SSIDs (or wireless
network names). When wireless devices are searching for available wireless networks to
connect to, the SSIDs (or wireless network names) will appear as separate and different
wireless networks. Since they appear as separate wireless networks, they are also
referred to as virtual APs (Access Points) since they appear as separate wireless access
points but are actually all being broadcasting and managed by a single wireless access
point. Each virtual AP can be configured each with a different SSID (or wireless network
name), security type and additional settings for wireless devices to connect. You can use
the multiple SSID feature to setup guest wireless accounts with a different security type
to keep your primary wireless network security information private. The diagram shows
an example of a client connecting to SSID 1 and another client connecting to SSID 2.
By default, your router functions in Access Point mode to allow wireless client devices to
connect and access your network resources and access the Internet using a single SSID.
The diagram shows an example of a client connecting to SSID 1 and another client
connecting to SSID 2.
4. Review the QoS settings. Click Apply to save your setting.
© Copyright 2013 TRENDnet. All Rights Reserved.
29
TEW-810DR
TRENDnet User’s Guide
• Enabled: Check the option to enable the Guest Network. Select a schedule rule you
would like to apply to your wireless network. (See “Create Schedule” section on
page 34) or select Always to have radio always on.
• Wireless Name (SSID): This acronym stands for Service Set Identifier and is the
name of your wireless network. It differentiates your wireless network from others
around you. It is recommended to use a different name from your primary wireless
network to a name that you can easily identify and differentiate from the primary.
You can reference your guests to access this network instead of the primary.
5. Under Security Policy, you can apply a different wireless security type and key to the
guest network. Please refer to How to choose the type of security for your wireless
network page 11 to find out about different security types and Secure your wireless
network page 12 for wireless security configuration.
To configure multiple SSID on your router:
1. Log into your router management page (see “Access your router management page”
on page 16).
2. Click on the Advanced tab.
Note: You can repeat the steps to enable and configure additional SSIDs. You can
configure your wireless security settings for the additional SSIDs under Wireless
(2.4GHz or 5GHz)>Security. Under the Security Policy section, click the Wireless
Name (SSID) drop-down list to select the additional SSIDs to configure. Please refer
to page 15 to find out about different security types and page 16 for wireless
security configuration.
Wireless bridging using WDS (Wireless Distribution System)
Advanced > Wireless (2.4GHz or 5GHz) > WDS
3. Select the wireless band you would like to configure Wireless 2.4GHz or Wireless
5GHz and click on Multiple SSID.
4. Review the Multiple SSID settings, click Apply when finished.
Wireless bridging using WDS allows the device to create a wireless bridge with other
WDS supported wireless routers and access points configured in WDS mode to bridge
groups of network devices together wirelessly. Simultaneously, the router will also
function in access point mode allowing wireless client devices such as computers, game
consoles, mobile phones, etc. to connect in order to access network resources from
multiple groups of network devices as well as the Internet.
Note: You can create up to four WDS bridge connections on each wireless band
(2.4GHz and 5GHz). WDS (Wireless Distribution System) is not currently
standardized and may not connect to different model wireless routers or access
points, therefore, when using WDS, it is recommended to use the same model and
version for wireless bridging.
By default, your router functions in Access Point mode to allow wireless client devices to
connect and access your network resources and access the Internet.
© Copyright 2013 TRENDnet. All Rights Reserved.
30
TEW-810DR
TRENDnet User’s Guide
In the diagram below, the blue color represents the WDS wireless bridged connections
between the routers. The green color represents access point mode connections
between wireless client devices and the routers.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on WDS.
4. Select Enable for WDS and enter the MAC address of the other WDS supported
wireless device you are bridging next to AP MAC Address field. (e.g.
00:11:22:AA:BB:CC). To save settings, click Apply.
Note: Before configuring WDS, please ensure the following first:
1. Make sure different IP addresses are assigned to each WDS supported wireless
device used for bridging. (ex. 192.168.10.1,192.168.10.2, 192.168.10.3) to avoid
IP address conflict. See page 34 for changing the LAN IP address.
2. If you are using more than one WDS supported router, please make sure the LAN
DHCP server is enabled on only one and disabled on all others to avoid IP address
conflict. See page 35 for DHCP server options.
3. Configure the same wireless channel and use the same on all WDS supported
wireless devices. See page 20 for configuring basic wireless settings.
4. Configure the same wireless security and key on all WDS supported devices. See
page 15 for configuring wireless security settings.
To configure WDS bridging between TEW-810DRU routers:
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
For additional routers, make sure to disable the DHCP server first on all additional
routers and configure the LAN IP address to be different on each router. You will
connect devices to the LAN ports 1-4 only on all additional routers and the WAN port is
not used. Then, repeat the steps for additional routers you are bridging.
Additional wireless settings
Advanced > Wireless (2.4GHz or 5GHz) > Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
© Copyright 2013 TRENDnet. All Rights Reserved.
31
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Select wireless band you would like to configure, Wireless 2.4GHz or Wireless 5GHz
and click on Multiple SSID.
4. Review the Multiple SSID settings, click Apply when finished.
TEW-810DR
• Beacon Interval: A beacon is a management frame used in wireless networks that
transmitted periodically to announce the presence and provide information about
the router’s wireless network. The interval is the amount time between each
beacon transmission.
Default Value: 100 milliseconds (range: 25-1000)
• DTIM: A DTIM is a countdown informing clients of the next window for listening to
broadcast and multicast messages. When the wireless router has buffered
broadcast or multicast messages for associated clients, it sends the next DTIM with
a DTIM Interval value. Wireless clients detect the beacons and awaken to receive
the broadcast and multicast messages. The default value is 1. Valid settings are
between 1 and 255.
• Fragment Threshold: Wireless frames can be divided into smaller units (fragments)
to improve performance in the presence of RF interference and at the limits of RF
coverage. Fragmentation will occur when frame size in bytes is greater than the
Fragmentation Threshold. This setting should remain at its default value of 2346
bytes. Setting the Fragmentation value too low may result in poor performance.
• RTS Threshold: The Request To Send (RTS) function is part of the networking
protocol. A wireless device that needs to send data will send a RTS before sending
the data in question. The destination wireless device will send a response called
Clear to Send (CTS). The RTS Threshold defines the smallest data packet size
allowed to initiate the RTS/CTS function.
Default Value: 2347 (range: 1-2347)
• TX Power: Select the wireless transmit power of your wireless router.
• Short Preamble: Using a short (400ns) guard interval can increase throughput.
However, it can also increase error rate in some installations, due to increased
sensitivity to radio-frequency reflections. Select the option that works best for your
installation.
• Short Slot: Is the time the device waits before retransmitting a packet after a
collision.
• 20/40 Coexistence: Allows legacy wireless clients to connect to your wireless
network.
• Guard Interval: Allows distinct wireless packets to no interfere with each other.
• MCS: Modulation and coding scheme, defines the transmission rate of your wireless
router.
• Extension Channel: Allows you to select your wireless router’s extended channel
when higher wireless bandwidth is used.
© Copyright 2013 TRENDnet. All Rights Reserved.
32
TEW-810DR
TRENDnet User’s Guide
• Multicast-to-Unicast: Allows the wireless router to convert multicast traffic to
unicast.
Note: It is recommended to keep the default setting – Auto.
Wireless security (Wireless MAC filter)
Advanced > Wireless (2.4GHz or 5GHz) > Security
You may want to block wireless computers or devices on your network. This feature
allows you to protect your wireless network using MAC address.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• Filter Mode: Select the wireless filter mode you would like to apply.
o Disable: Select this option if you would like to disable filter.
o Allow: Select this option to allow only listed MAC addresses.
o Reject: Select this option to deny only listed MAC addresses.
• MAC address: Enter the MAC address of the wireless client you would like to apply
to the MAC filter.
Set your router date and time
Advance > Administrator > Time
1. Log into your router management page (see “Access your router management page”
on page 15).
3. Select the wireless band you would like to configure Wireless 2.4GHz or Wireless
5GHz and click on Security.
2. Click on the Advanced tab.
3. Click on Administrator section and click Time.
4. Select the wireless SSID from the pull down menu you would like to apply the MAC
filter to.
4. Review the Time settings. Click Apply to save settings.
5. Review the Wireless MAC filter settings and click Apply to save changes.
© Copyright 2013 TRENDnet. All Rights Reserved.
33
TEW-810DR
TRENDnet User’s Guide
Note: You can apply a predefined schedule to the following features:
•
•
•
•
Virtual Server
Access Control (Domain/URL Filters & IP/Protocol LAN Client Filters)
Special Applications
Gaming
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• Sytem Time: Displays the current device time and date information.
• Enable Daylight Saving: Check the option to configure the DST settings. Set the
annual range when daylight saving is activated.
• Enable NTP Server: Check to enable NTP server. If option is not selected you will
need to manually set your time.
• NTP Server: Select the NTP server to use on the pull down menu.
• Time Zone: Select from the pull down menu your time zone.
3. Click on Setup section and click Schedule.
Note: NTP servers are used for computers and other network devices to synchronize
time across an entire network.
• NTP synchronization: Enter the time duration in minutes of when the router will
synchronize with the NTP server.
• Manually set time: This option is available when Enable NTP Server option is not
enabled.
Note: Time is specified in 24-hour format.
3. Review the Schedule settings. Click Apply to save settings.
Create schedules
Advance > Setup> Schedule
For additional security control, your router allows you to create schedules to specify a
time period when a feature on your router should be activated and deactivated. Before
you use the scheduling feature on your router, ensure that your router system time is
configured correctly.
© Copyright 2013 TRENDnet. All Rights Reserved.
34
TEW-810DR
TRENDnet User’s Guide
• Rule Name: Enter a name for the schedule you would like to apply.
• Days: Check the days you would like the rule to be applied or select All Week to
enable the rule all week.
• Start/End Time: Select the start and end time you would like the schedule to follow.
Note: The schedule defined will define the time/day the feature will be activated.
Open a device on your network to the Internet
4. Select Enable in the DMZ Settings section. Enter the IP address you assigned to the
computer or network device to expose to the Internet. Click Apply to save settings.
This router can provide access to devices on your local area network to the Internet
using the Virtual Server, Special Application, method (DMZ NOT recommended).
DMZ
Advanced > Firewall > DMZ
You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature
that makes all the ports and services available on the WAN/Internet side of the router
and forwards them to a single IP address (computer or network device) on your
network. The DMZ feature is an easy way of allowing access from the Internet however,
it is a very insecure technology and will open local area network to greater threats from
Internet attacks.
It is strongly recommended to use Virtual Server (also called port forwarding, see
“Virtual Server” on page 35) to allow access to your computers or network devices from
the Internet.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
Virtual Server
Advanced > Firewall > Virtual Server Rules
Virtual Server (also called port forwarding) allows you to define specific ports (used or
required by a specific application) and forward them to a single IP address (a computer
or device) on your network. Using this feature is more secure compared to using DMZ
(see “DMZ” on page 35) in which DMZ forwards all ports instead of only specific ports
used by an application. An example would be forwarding a port to an IP camera
(TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on
your network to be able to view it over the Internet. To open several ports please refer
to “Gaming” section on page 37.
Since most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service
(outlined in Identify Your Network section page 41).
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Firewall section and click on DMZ.
© Copyright 2013 TRENDnet. All Rights Reserved.
35
TEW-810DR
TRENDnet User’s Guide
3. Click on the Firewall section and click on Virtual Server Rule.
• Schedule: Select the defined schedule you would like to have the rule to be applied
(see “Create Schedule” section on page 34).
Note: The Public Port can be assigned a different port number than the Private Port
(also known as port redirection), however it is recommended to use the same port
number for both settings. Please refer to the device documentation to determine
which ports and protocols are required.
4. Select Enable in the Virtual Server Function section. Review the virtual server settings.
Click Add to save settings.
Example: To forward TCP port 80 to your IP camera
1. Setup DynDNS service (see Identify Your Network section page 41).
2. Access TRENDnet IP Camera management page and forward Port 80 (see product
documentation)
3. Make sure to configure your network/IP camera to use a static IP address.
Note: You may need to reference your camera documentation on configuring a
static IP address.
4. Log into your router management page (see “Access your router management page”
on page 15).
5. Click on Advanced then Firewall, click on Virtual Server.
• Rule Enable: Check to enable virtual server rule
• Rule Name: Enter the name you would like to assign to the virtual server rule.
• IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
• Protocol: Select the protocol required for your device. TCP or UDP.
Note: Please refer to the device documentation to determine which ports and
protocols are required. You should assign a static IP address to the device or use
DHCP reservation to ensure the IP address of the device does not change.
• Public/Private Public Port: Enter the port number used to access the device from
the Internet.
• Inbound Filter: Select the defined inbound filter you would like to apply or select
Allow All.
6. Click Enabled to turn on this virtual server.
7. Next to Rule Name, you can enter another name for the virtual server, otherwise,
leave the default name.
8. Next to IP Address, enter the IP address assigned to the camera. (e.g. 192.168.10.101)
9. Next to Protocol, make sure TCP is selected in the drop-down list.
10. The Private Port and Public Port, make sure port number 80 is configured for both
settings.
11. Select Allow All on Inbound Filter section.
12. Select Always for Schedule section.
13. To save the changes, click Add.
Special Applications
Advanced > Firewall > Special Applications
Special applications (also called port triggering) is typically used for online gaming
applications or communication applications that require a range of ports or several
ports to be dynamically opened on request to a device on your network. The router will
wait for a request on a specific port or range of ports (or trigger port/port range) from a
device on your network and once a request is detected by your router, the router will
forward a single port or multiple ports (or incoming port/port range) to the device on
© Copyright 2013 TRENDnet. All Rights Reserved.
36
TEW-810DR
TRENDnet User’s Guide
your network. This feature is not typically used as most devices and routers currently
use UPnP (Universal Plug and Play) to automatically configure your router to allow
access for applications. See “Enable/disable UPnP on your router” on page 39.
Note: Please refer to the device documentation to determine if your device supports
UPnP first, before configuring this feature.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• Rule Enable: Check to enable port triggering rule
• Rule Name: Enter the name you would like to assign to the port triggering rule.
3. Click on the Firewall section and click on Special Applications.
• Match Protocol: Select the protocol to be forwarded to the device. TCP or UDP.
• Match Port: Enter the ports or port range to be forwarded to the device. (e.g. 20002038 ,2200-2210).
• Trigger Protocol: Select the protocol requested by the device. TCP or UDP.
• Trigger Port: Enter the ports or port range requested by the device. (e.g. 554-554 or
6112-6112).
Note: Please refer to the device documentation to determine which ports and
protocols are required.
4. Select Enable under Port Triggering Function.
• Schedule: Select the defined schedule you would like to have the rule to be applied
(see “Create Schedule” section on page 34).
Gaming
5. Review the special application settings. Click Apply to save settings.
Advanced > Firewall > Gaming
Gaming allows you to define multiple ports (used or required by a specific application or
game) and forward them to a single IP address (a computer or device) on your network.
Using this feature is more secure compared to using DMZ (see “DMZ” on page 35) in
which DMZ forwards all ports instead of only specific ports used by an application. Since
most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service (see
“Identify your network over the Internet” section on page 41).
© Copyright 2013 TRENDnet. All Rights Reserved.
37
TEW-810DR
TRENDnet User’s Guide
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• UDP Ports to Open: Enter the UDP port you would like to set.
Note: Please refer to the device documentation to determine which ports and
protocols are required. You should assign a static IP address to the device or use
DHCP reservation to ensure the IP address of the device does not change.
• Inbound Filter: Select the defined inbound filter you would like to apply or select
Allow All.
• Schedule: Select the defined schedule you would like to have the rule to be applied
(see “Create Schedule” section on page 34).
3. Click on the Firewall section and click on Special Applications.
Enable/disable Application Layer Gateways (ALG)
Advanced > Firewall > ALG
You may want to configure your router to allow computers the use of specific high layer
applications or service sessions to pass through. Application Layer Gateways (ALG)
allows you to easily enable or disable these applications to pass through your router.
Note: It is recommended to leave these settings enabled.
4. Review the port range settings. Click Add to save settings.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Firewall section and click on Special Applications.
• Rule Enable: Check to enable port triggering rule
• Rule Name: Enter the name you would like to assign to the port triggering rule or
select from a predefine list on the pull down menu.
• IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
• TCP Ports to Open: Enter the TCP port you would like to set.
4. Review the applications to enable or disable. Click Apply to save the changes.
© Copyright 2013 TRENDnet. All Rights Reserved.
38
TEW-810DR
TRENDnet User’s Guide
•
•
•
•
•
•
Streaming Media (RTSP): Allows STMP video protocol through your router.
Streaming Media-VoIP (SIP): Allows SIP protocol through your router.
Streaming Media-VoIP (H.323): Allows H.323 protocol through your router.
File Transfer (FTP): Allows FTP protocol through your router.
File Transfer (TFTP): Allows TFTP protocol through your router.
IPSec: Allows IPSec VPN connections through your router.
Enable/disable UPnP on your router
Advanced > Advanced Network
UPnP (Universal Plug and Play) allows devices connected to a network to discover each
other and automatically open the connections or services for specific applications (e.g.
instant messenger, online gaming applications, etc.) UPnP is enabled on your router by
default to allow specific applications required by your computers or devices to allow
connections through your router as they are needed.
1. Log into your router management page (see “Access your router management page”
on page 15).
4. Click the UPnP drop-down list and select Enabled to enable UPnP or Disabled to
disable UPnP. Click Apply to save settings.
Note: It is recommended to leave this setting enabled, otherwise, you may
encounter issues with applications that utilize UPnP in order allow the required
communication between your computers or devices and the Internet.
Router Maintenance & Monitoring
Change your router login password
Advanced > Setup > Management
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
2. Click on the Advanced tab.
3. Click on the Setup section and click on Management.
3. Click on the Administrator section and click on Advanced Network.
© Copyright 2013 TRENDnet. All Rights Reserved.
39
TEW-810DR
TRENDnet User’s Guide
2. Click on the Advanced tab.
3. Click on the Setup section and click on Management.
4. Under the Administrator Settings section, in the Password field, enter the new
password. Click Apply to save settings.
• Idle Timeout: Enter the idle timeout in seconds before automatically logging you
out of the router management page.
Note: If you change the router login password, you will need to access the router
management page using the User Name “admin” and the new password instead of
the default password “admin”. If you reset the device to defaults, you will need to
access the router management page use the predefined settings on the side or
bottom labels.
4. Under the Device Name Settings section, in the Device Name field, enter the new
device name to display on your network to identify the router. Click Apply to save
settings.
Change your device URL
Advanced > Serup > Management
Change your device name
Advanced > Setup > Management
1. Log into your router management page (see “Access your router management page”
on page 15).
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
© Copyright 2013 TRENDnet. All Rights Reserved.
40
TEW-810DR
TRENDnet User’s Guide
3. Click on the Setup section and click on Management.
management area. Dynamic DNS services allow your router to confirm its location to the
given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability
to provide a virtual fixed IP address for your network. This means that even though your
ISP is always changing your IP address, the Dynamic DNS service will be able to identify
your network using a fixed address—one that can be used to view home IP Camera and
other devices on your local area network.
Note: First, you will need to sign up for one of the DDNS service providers listed in
the Server Address drop-down list.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Setup section and click on Management.
3. Under the Device URL Settings section, in the Device URL field, enter the new device
URL used to log into the router management page.
Note: Even if the LAN IP address of the router is changed, the device URL will still
allow to use the name as reference to log into the router management page.
4. To save changes, click Apply.
Identify your network on the Internet
Advanced > Setup > Management
4. Review the DDNS Settings section. Click Apply to save settings.
Since most ISPs constantly change your home IP address, providing access to devices on
your home or small office Local Area Network (such as IP Cameras) from the Internet
requires setting up a Dynamic DNS service and entering the parameters into this
© Copyright 2013 TRENDnet. All Rights Reserved.
41
TEW-810DR
TRENDnet User’s Guide
• Dynamic DNS Provider: Click the drop-down list Select your DDNS service.
• Host Name: Personal URL provided to you by your Dynamic DNS service provider
(e.g. www.trendnet.dyndns.biz)
• User Name: The user name needed to log in to your Dynamic DNS service account
• Password: This is the password to gain access to Dynamic DNS service (NOT your
router or wireless network password) for which you have signed up to.
Note: If you would like to discard the changes, click Cancel before you click Save.
4. Review the setting on the Remote Management section. Click Apply to save settings
Allow remote access to your router management page
Advanced > Administrator > Management
You may want to make changes to your router from a remote location such at your
office or another location while away from your home.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
• Remote Control: Select enable or disable for the feature.
• Port: Enter the port to assign remote access to the router. It is recommended to
leave this setting as 8080.
Note: If you have configured port 8080 for another configuration section such as
virtual server or special application, please change the port to use. (Recommended
port range 1024-65534)
Reset your router to factory defaults
3. Click on the Setup section and click on Management.
Advance > Administrator > Settings Management
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting. Before you reset your
router to defaults, if possible, you should backup your router configuration first, see
“Backup and restore your router configuration settings” on page 51.
There are two methods that can be used to reset your router to factory defaults.
© Copyright 2013 TRENDnet. All Rights Reserved.
42
TEW-810DR
TRENDnet User’s Guide
• Reset Button – Located on the side panel of your router, see “Product Hardware
Features” on page 5. Use this method if you are encountering difficulties with
accessing your router management page.
OR
• Router Management Page
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
Router Default Settings
Administrator User Name
admin
Administrator Password
Please refer sticker or device label
Router IP Address
192.168.10.1
Router Subnet Mask
255.255.255.0
DHCP Server IP Range
192.168.10.101-192.168.199
Wireless 2.4GHz
Enabled
Wireless 2.4GHz Encryption
Please refer sticker or device label
Wireless 5Ghz
Enabled
Wireless 5GHz Encryption
Please refer sticker or device label
Backup and restore your router configuration settings
Advanced > Administrator > Settings Management
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
4. Under Load Factory Default, click Load Default. When prompted to confirm this
action, click OK.
To backup your router configuration:
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
© Copyright 2013 TRENDnet. All Rights Reserved.
43
TEW-810DR
TRENDnet User’s Guide
4. Under Export Settings section, click Export.
5. Depending on your web browser settings, you may be prompted to save a file (specify
the location) or the file may be downloaded automatically to the web browser
settings default download folder. (Default Filename: .cfg)
To restore your router configuration:
4. Under Import Settings, next to Settings file location, depending on your web
browser, click on Browse or Choose File.
5. A separate file navigation window should open.
6. Select the router configuration file to restore and click Import. (Default Filename:
.cfg). If prompted, click Yes or OK. Wait for the router to restore settings.
1. Log into your router management page (see “Access your router management page”
on page 15).
Upgrade your router firmware
2. Click on the Advanced tab.
TRENDnet may periodically release firmware upgrades that may add features or fix
problems associated with your TRENDnet router model and version. To check if there is
a firmware upgrade available for your device, please check your TRENDnet model and
version using the link. http://www.trendnet.com/downloads/
3. Click on the Administrator section and click on Settings Management.
Advanced > Setup > Upload Firmware
In addition, it is also important to verify if the latest firmware version is newer than the
one your router is currently running. To identify the firmware that is currently loaded on
your router, log in to the router, click on the Administrator section and then on the
Status. The firmware used by the router is listed at the top of this page. If there is a
newer version available, also review the release notes to check if there were any new
features you may want or if any problems were fixed that you may have been
experiencing.
1. If a firmware upgrade is available, download the firmware to your computer.
© Copyright 2013 TRENDnet. All Rights Reserved.
44
TEW-810DR
TRENDnet User’s Guide
2. Unzip the file to a folder on your computer.
Please note the following:
• Do not interrupt the firmware upgrade process. Do not turn off the device or press
the Reset button during the upgrade.
• If you are upgrade the firmware using a laptop computer, ensure that the laptop is
connected to a power source or ensure that the battery is fully charged.
• Disable sleep mode on your computer as this may interrupt the firmware upgrade
process.
• Do not upgrade the firmware using a wireless connection, only using a wired
network connection.
• Any interruptions during the firmware upgrade process may permanently damage
your router.
1. Log into your router management page (see “Access your router management page”
on page 15).
4. Navigate to the folder on your computer where the unzipped firmware file (.bin) is
located and select it.
5. Click Apply. If prompted, click Yes or OK.
Reboot your router
Administrator > Settings Management
You may want to restart your router if you are encountering difficulties with your router
and have attempted all other troubleshooting.
There are two methods that can be used to restart your router.
2. Click on the Advanced tab.
3. Click on the Setup section and click on Upload Firmware.
• Turn the router off for 10 seconds using the router On/Off switch (EU version
only) located on the rear panel of your router or disconnecting the power port,
sees “Product Hardware Features” on page 5.
Use this method if you are encountering difficulties with accessing your router
management page. This is also known as a hard reboot or power cycle.
OR
• Router Management Page – This is also known as a soft reboot or restart.
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
3. Depending on your web browser, in the Upload Firmware section, click Browse or
Choose File.
© Copyright 2013 TRENDnet. All Rights Reserved.
45
TEW-810DR
TRENDnet User’s Guide
3. Under System Reboot section, click Reboot.
4. Click the WAN Ping Respond drop-down list and select Enabled to allow ping requests
from your router to the Internet. Click Apply to save settings.
Allow/deny ping requests to your router from the Internet
5. To save changes, click Apply.
Advanced > Advanced Network
Note: If you would like to discard the changes, click Cancel before you click Save.
To provide additional security, you may want to disable your router from responding to
ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is
network communication test to check if a device with IP address is alive or exists on the
network. By disabling this feature, you can conceal your router’s IP address and
existence on the Internet by denying responses to ping requests from the Internet. You
can additionally use this feature as a tool for troubleshooting purposes.
Check the router system information
1. Log into your router management page (see “Access your router management page”
on page 15).
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
3. Click on the Administrator section and click on Router Status.
Advanced > Administrator > Router Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
© Copyright 2013 TRENDnet. All Rights Reserved.
46
TEW-810DR
TRENDnet User’s Guide
System Info
• Primary/Secondary Domain Name System: The current DNS address(es) assigned
to your router port or interface configuration.
• Renew (DHCP WAN Type): Click this option to renew your WAN IP address.
• Release (DHCP WAN Type): Click this option to release the WAN IP address of your
router.
• Connect (PPPoE WAN Type): Click this option to connect to your DSL ISP
• Disconnect (PPPoE WAN Type): Click this option to disconnect from your DSL ISP.
LAN Information
• Firmware Version – The current firmware version your router is running.
• System Time: The current time set on your router.
• Router Up Time – The duration your router has been running continuously without
a restart/power cycle (hard or soft reboot) or reset.
Internet Configurations
• MAC Address: The current MAC address of your router’s wireless or interface
configuration.
• IP Address: Displays your router’s current IP address.
• Subnet Mask: Displays your router’s current subnet mask.
2.4GHz Wireless
• Connected Type: The WAN connection type applied on your router.
• WAN IP Address: The current IP address assigned to your router WAN port or
interface configuration.
• Subnet Mask: The current subnet mask assigned to your router WAN port or
interface configuration.
• Default Gateway: The current gateway assigned to your router WAN port or
interface configuration.
• MAC Address: The MAC address of your router’s wireless LAN or interface
configuration.
• Channel: Displays the current wireless channel your router is operating.
© Copyright 2013 TRENDnet. All Rights Reserved.
47
TEW-810DR
TRENDnet User’s Guide
• Network Name (SSID)/ Security Mode: Displays the current wireless network name
assigned to your router and the wireless security applied to the SSID
• Multiple SSSID/ Security: Displays the current wireless network name assigned to
your router and the wireless security applied to the SSID
• Guest Network/ Security Mode: Displays the current wireless network name
assigned to your router and the wireless security applied to the SSID
1. Log into your router management page (see “Access your router management page”
on page 15).
2. Click on the Advanced tab.
5GHz Wireless LAN
3. Click on the Administrator section and click on IPv6 Status.
IPv6 Connection Information
• MAC Address: The MAC address of your router’s wireless LAN or interface
configuration.
• Channel: Displays the current wireless channel your router is operating.
• Network Name (SSID)/ Security Mode: Displays the current wireless network name
assigned to your router and the wireless security applied to the SSID
• Multiple SSSID/ Security: Displays the current wireless network name assigned to
your router and the wireless security applied to the SSID
• Guest Network/ Security Mode: Displays the current wireless network name
assigned to your router and the wireless security applied to the SSID
•
•
•
•
IPv6 Connection Type: The type of IPv6 being used on your router.
Network Type Status: Your IPv6 network status.
Renew (DHCP WAN Type): Click this option to renew your WAN IP address.
Release (DHCP WAN Type): Click this option to release the WAN IP address of your
router.
IPv6 Status
Advanced > Administrator > IPv6 Status
You can view the current IPv6 status on your router.
© Copyright 2013 TRENDnet. All Rights Reserved.
48
TEW-810DR
TRENDnet User’s Guide
4. Select Enable System Log and click Apply to save settings.
•
•
•
•
WAN IPv6 Address: Your IPv6 WAN IP address
IPv6 Default Gateway: IPv6 default gateway
Network Prefix: IPv6 prefix used
Primary/Secondary IPv6 DNS Server: IPv6 DNS server
View your router log
Administrator > System Log
Your router log can be used to obtain activity information on the functionality of your
router or for troubleshooting purposes.
1. Log into your router management page (see “Access your router management page”
on page 15).
• Refresh: Click to refresh screen.
• Clear: Click to clear the screen.
2. Click on the Advanced tab.
3. Click on the Administrator section and click on System Log.
© Copyright 2013 TRENDnet. All Rights Reserved.
49
TEW-810DR
TRENDnet User’s Guide
Router Management Page Structure
BASIC
Network Status
•
•
•
•
Internet Status
Guest Network Status
Wireless
Connected Devices
Wireless
•
Export Settings
•
Multiple SSID
Import Settings
•
Security
Load Factory Default
Reboot
Time
Setup
•
•
2.4 GHz Wireless Network
•
Security
•
•
5GHz Wireless Network
Security
Guest Network
•
2.4 GHz Guest Network
•
Security
•
5GHz Guest Network
•
Security
Parental Control
•
•
Status
•
IPv6 Status
•
System Log
•
Advanced Network
•
Settings Management
Station List
•
Advanced
DHCP Reservations
•
Multiple SSID
•
Security
Clone MAC
RIP
IPv6 Setting
•
QoS
•
Schedule
•
Upload Firmware
•
Management
•
•
WDS
•
ADVANCE
Administrator
WPS
•
Routing
Web URL Filter
•
DHCP Server
WAN Setting
•
Wireless MAC filter
Wireless 5GHz
LAN Setting
•
Password
Device URL
Device Name
DDNS Settings
Remote Management
Wizard
Wireless 2.4GHz
•
WDS
•
Advanced
Wireless MAC filter
•
WPS
•
Station List
Security
•
•
Access Control
Port Filter
IP Filter
MAC Filter
Website Filter
Inbound Filter
Firewall
•
DMZ
•
Virtual Server Rules
•
Special Applications
•
Gaming
•
ALG
© Copyright 2013 TRENDnet. All Rights Reserved.
50
Appendix
TRENDnet User’s Guide
Technical Specifications
Hardware
Standards
Wired: IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-TX), IEEE
802.3ab (1000Base-T)
Wireless: IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, 802.11a
Output: 12 V DC, 1A external power adapter
Power
Consumption
8 watts (max.)
Dimension (L x
W x H)
151 x 113 x 60 mm (5.9 x 4.4 x 2.3 in.)
Weight
255 g (9 oz)
Temperature
Operation: 0°~ 40°C (32°F~ 104°F)
Internet
Protocol
IPv4 and IPv6
LAN
4 x 10/100Mbps Auto-MDIX
Humidity
Max. 95% (non-condensing)
WAN
1 x 10/100 Mbps Auto-MDIX
Certifications
CE, FCC
WPS Button
Wi-Fi Protected Setup (WPS) connects with other WPS compliant
devices
Wireless
Reset Button
Reset unit back to factory default (press and hold for 10 seconds)
Frequency
Static routing, UPnP, DHCP, server, Dynamic DNS (DynDNS.com),
NTP, VPN/RTSP/SIP pass through, IPv6
Modulation
Network
Protocols /
Features
Quality of
Service
WMM and Internet Bandwidth Control (Configurable Upload /
Download)
Firewall
NAT, SPI, DMZ host, virtual server, port forwarding MAC, IP and
URL filter, Schedules (wireless, MAC filter, virtual server, port
forwarding, firewall rule, application rule, guest network, and
URL filter), Inbound IP filter (virtual server)
Management
/ Monitoring
Supported
Web Browser
Local / remote configuration, upgrade firmware, backup /
restore configuration via web browser, internal system log
(Categories: System, Firewall & Security, Router Status / Filter:
Critical, Warning, Information), syslog, email log, active sessions,
Internet Explorer 8.0 or above, Firefox, Chrome, Opera, Safari
LED Indicator
Power, WAN (Internet), Wireless, WPS, USB
Power Adapter
Input: 100 ~ 240 V, 50~60 Hz, 0.3 A
2.4 GHz: 2.412~2.472
5 GHz: 5.1805 ~ 5.805
CCK, DQPSK, DBPSK, OFDM, BPSK, QPSK, 16/64-QAM
802.11a: up to 54 Mbps
802.11b: up to 11 Mbps
Data Rate
802.11g: up to 54 Mbps
802.11n: up to 300 Mbps (for 2.4GHz)
802.11n: up to 150 Mbps (for 5 GHz)
802.11ac: up to 433 Mbps
Security
64/128-bit WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS
Guest network
1 per wireless band, access control between 2.4GHz and 5GHz
guest zones
802.11a: 15 dBm (typical) @ 54 Mbps
802.11b: 26 dBm (typical) @ 11 Mbps
Output Power
802.11g: 22 dBm (typical) @ 54 Mbps
802.11n: 22 dBm (typical) @ 300 Mbps (for 2.4 GHz)
802.11n: 15 dBm (typical) @ 150 Mbps (for 5 GHz)
802.11ac: 12 dBm (typical) @ 433 Mbps
© Copyright 2013 TRENDnet. All Rights Reserved.
51
TRENDnet User’s Guide
Appendix
802.11a: -72 dBm (typical) @ 54 Mbps
Receiving
Sensitivity
802.11b: -90 dBm (typical) @ 11 Mpbs
802.11g: -75 dBm (typical) @ 54 Mbps
802.11n: -70 dBm (typical) @ 300 Mbps (for 2.4 GHz)
802.11n: -70 dBm (typical) @ 150 Mbps (for 5 GHz)
802.11ac: -56 dBm (typical) @ 433 Mbps
2.4 GHz: 1~11 (FCC), 1~13 (ETSI)
Channels
5 GHz: 36, 40, 44, 48, 149, 153, 157, 161, 165 (FCC) 36, 40, 44,
48 (ETSI)
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual
data throughput and coverage will vary depending on interference, network traffic, building
materials and other conditions.
© Copyright 2013 TRENDnet. All Rights Reserved.
52
TRENDnet User’s Guide
Troubleshooting
Q: I typed http://192.168.10.1 in my Internet Browser Address Bar, but an error
message says “The page cannot be displayed.” How can I access the router
management page?
Answer:
1. Check your hardware settings again. See “Router Installation” on page 8.
2. Make sure the LAN and WLAN lights are lit.
3. Make sure your network adapter TCP/IP settings are set to Obtain an IP address
automatically or DHCP (see the steps below).
4. Make sure your computer is connected to one of the router’s LAN ports
5. Press on the factory reset button for 15 seconds, the release.
Windows 7
a. Go into the Control Panel, click Network and Sharing Center.
b. Click Change Adapter Settings, right-click the Local Area Connection icon.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
d. Then click Obtain an IP address automatically and click OK.
Windows Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right-click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Obtain an IP address automatically and click OK.
Windows XP/2000
a. Go into the Control Panel, double-click the Network Connections icon
b. Right-click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Obtain an IP address automatically and click OK.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
Appendix
Q: I am not sure what type of Internet Account Type I have for my Cable/DSL
connection. How do I find out?
Answer:
Contact your Internet Service Provider (ISP) for the correct information.
Q: The Wizard does not appear when I access the router. What should I do?
Answer:
1. Click on Wizard on the left hand side.
2. Near the top of the browser, “Pop-up blocked” message may appear. Right click on
the message and select Always Allow Pop-ups from This Site.
3. Disable your browser's pop up blocker.
Q: I went through the Wizard, but I cannot get onto the Internet. What should I do?
Answer:
1. Verify that you can get onto the Internet with a direct connection into your modem
(meaning plug your computer directly to the modem and verify that your single
computer (without the help of the router) can access the Internet).
2. Power cycle your modem and router. Unplug the power to the modem and router.
Wait 30 seconds, and then reconnect the power to the modem. Wait for the modem to
fully boot up, and then reconnect the power to the router.
3. Contact your ISP and verify all the information that you have in regards to your
Internet connection settings is correct.
Q: I cannot connect wirelessly to the router. What should I do?
Answer:
1. Double check that the WLAN light on the router is lit.
2. Power cycle the router. Unplug the power to the router. Wait 15 seconds, then plug
the power back in to the router.
3. Contact the manufacturer of your wireless network adapter and make sure the
wireless network adapter is configured with the proper SSID. The preset SSID is
TRENDnet(model_number).
4. To verify whether or not wireless is enabled, login to the router management page,
click on Wireless.
5. Please see “Steps to improve wireless connectivity” on page 19 if you continue to
have wireless connectivity problems.
© Copyright 2013 TRENDnet. All Rights Reserved.
53
Appendix
TRENDnet User’s Guide
Appendix
How to find your IP address?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Command Prompt Method
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
How to configure your network settings to obtain an IP address automatically or use
DHCP?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
configuring network settings.
Windows 2000/XP/Vista/7
1. On your keyboard, press Windows Logo+R keys simultaneously to bring up the Run
dialog box.
Windows 7
a. Go into the Control Panel, click Network and Sharing Center.
2. In the dialog box, type cmd to bring up the command prompt.
b. Click Change Adapter Settings, right-click the Local Area Connection icon.
3. In the command prompt, type ipconfig /all to display your IP address settings.
c. Then click Properties and click Internet Protocol Version 4 (TCP/IPv4).
MAC OS X
d. Then click Obtain an IP address automatically and click OK.
1. Navigate to your Applications folder and open Utilities.
2. Double-click on Terminal to launch the command prompt.
3. In the command prompt, type ipconfig getifaddr  to display the wired
or wireless IP address settings.
Note: en0 is typically the wired Ethernet and en1 is typically the wireless Airport
interface.
Graphical Method
MAC OS 10.6/10.5
1. From the Apple menu, select System Preferences.
2. In System Preferences, from the View menu, select Network.
3. In the Network preference window, click a network port (e.g., Ethernet, AirPort,
modem). If you are connected, you'll see your IP address settings under "Status:"
MAC OS 10.4
1. From the Apple menu, select Location, and then Network Preferences.
2. In the Network Preference window, next to "Show:", select Network Status. You'll see
your network status and your IP address settings displayed.
Windows Vista
a. Go into the Control Panel, click Network and Internet.
b. Click Manage Network Connections, right-click the Local Area Connection
icon and click Properties.
c. Click Internet Protocol Version (TCP/IPv4) and then click Properties.
d. Then click Obtain an IP address automatically and click OK.
Windows XP/2000
a. Go into the Control Panel, double-click the Network Connections icon
b. Right-click the Local Area Connection icon and the click Properties.
c. Click Internet Protocol (TCP/IP) and click Properties.
d. Then click Obtain an IP address automatically and click OK.
MAC OS 10.4/10.5/10.6
a. From the Apple, drop-down list, select System Preferences.
b. Click the Network icon.
c. From the Location drop-down list, select Automatic.
d. Select and view your Ethernet connection.
In MAC OS 10.4, from the Show drop-down list, select Built-in
Ethernet and select the TCP/IP tab.
In MAC OS 10.5/10.6, in the left column, select Ethernet.
e. Configure TCP/IP to use DHCP.
© Copyright 2013 TRENDnet. All Rights Reserved.
54
Appendix
TRENDnet User’s Guide
In MAC 10.4, from the Configure IPv4, drop-down list, select Using
DHCP and click the Apply Now button.
In MAC 10.5, from the Configure drop-down list, select Using DHCP
and click the Apply button.
In MAC 10.6, from the Configure drop-down list, select Using DHCP
and click the Apply button.
f. Restart your computer.
Note: If you are experiencing difficulties, please contact your computer or operating
system manufacturer for assistance.
How to find your MAC address?
In Windows 2000/XP/Vista/7,
Your computer MAC addresses are also displayed in this window, however, you can type
getmac –v to display the MAC addresses only.
In MAC OS 10.4,
1. Apple Menu > System Preferences > Network
2. From the Show menu, select Built-in Ethernet.
3. On the Ethernet tab, the Ethernet ID is your MAC Address.
In MAC OS 10.5/10.6,
1. Apple Menu > System Preferences > Network
2. Select Ethernet from the list on the left.
3. Click the Advanced button.
3. On the Ethernet tab, the Ethernet ID is your MAC Address.
How to connect to a wireless network using the built-in Windows utility?
Note: Please note that although the following procedures provided to follow for your
operating system on configuring your network settings can be used as general
guidelines, however, it is strongly recommended that you consult your computer or
operating system manufacturer directly for assistance on the proper procedure for
connecting to a wireless network using the built-in utility.
Windows 7
1. Open Connect to a Network by clicking the network icon (
area.
or
) in the notification
2. In the list of available wireless networks, click the wireless network you would like to
connect to, then click Connect.
4. You may be prompted to enter a security key in order to connect to the network.
5. Enter in the security key corresponding to the wireless network, and click OK.
Windows Vista
1. Open Connect to a Network by clicking the Start Button.
To.
and then click Connect
2. In the Show list, click Wireless.
3. In the list of available wireless networks, click the wireless network you would like to
connect to, then click Connect.
4. You may be prompted to enter a security key in order to connect to the network.
5. Enter in the security key corresponding to the wireless network, and click OK.
Windows XP
1. Right-click the network icon in the notification area, then click View Available
Wireless Networks.
2. In Connect to a Network, under Available Networks, click the wireless network you
would like to connect to.
3. You may be prompted to enter a security key in order to connect to the network.
4. Enter in the security key corresponding to the wireless network, and click Connect.
© Copyright 2013 TRENDnet. All Rights Reserved.
55
Appendix
TRENDnet User’s Guide
Federal Communication Commission Interference Statement
Europe – EU Declaration of Conformity
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one of the following measures:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC,
2006/95/EC and 2009/125/EC.
Regulation (EC) No. 1275/2008
Regulation (EC No. 278/2009
EN60950-1 : 2006+A11 : 2009
Safety of Information Technology Equipment
FCC Radiation Exposure Statement:
EN 300 328 V1.7.1 : (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission
systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread
spectrum modulation techniques; Harmonized EN covering essential requirements under
article 3.2 of the R&TTE Directive
EN 301 489-1 V1.9.2 : (2011-09)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical
requirements
EN 301 489-17 V2.2.1 : (2012-09)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic
Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for 2,4 GHz
wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz
Broadband Data Transmitting Systems
EN 301 893 V1.6.1 : (2011-11)
Broadband Radio Access Networks (BRAN);5 GHz high performance RLAN;Harmonized EN
covering the essential requirements of article 3.2 of the R&TTE Directive
This device is a 2.4/5G GHz wideband transmission system (transceiver), intended for use in
all EU member states and EFTA countries, except in France and Italy where restrictive use
applies.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance
20cm between the radiator & your body.
In Italy the end-user should apply for a license at the national spectrum authorities in order
to obtain authorization to use the device for setting up outdoor radio links and/or for
supplying public access to telecommunications and/or network services.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.
This device may not be used for setting up outdoor radio links in France and in some areas
the RF output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5
MHz. For detailed information the end-user should contact the national spectrum authority
in France.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
IMPORTANT NOTE:
The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destination.
The firmware setting is not accessible by the end user.
RoHS
This product is RoHS compliant.
© Copyright 2013 TRENDnet. All Rights Reserved.
56
Appendix
TRENDnet User’s Guide
Česky [Czech]
Dansk [Danish]
Deutsch
[German]
TRENDnet tímto prohlašuje, že tento TEW-810DRU je ve shodě se
základními požadavky a dalšími příslušnými ustanoveními směrnice
1999/5/ES.
Undertegnede TRENDnet erklærer herved, at følgende udstyr TEW810DRU overholder de væsentlige krav og øvrige relevante krav i
direktiv 1999/5/EF.
Hiermit erklärt TRENDnet, dass sich das Gerät TEW-810DRU in
Übereinstimmung mit den grundlegenden Anforderungen und den
übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG
befindet.
Eesti [Estonian]
Käesolevaga kinnitab TRENDnet seadme TEW-810DRU vastavust
direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist
tulenevatele teistele asjakohastele sätetele.
English
Hereby, TRENDnet, declares that this TEW-810DRU is in compliance
with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Español
[Spanish]
Por medio de la presente TRENDnet declara que el TEW-810DRU
cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική
[Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑTRENDnet ΔΗΛΩΝΕΙ ΟΤΙTEW-810DRU
ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ
ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français
[French]
Par la présente TRENDnet déclare que l'appareil TEW-810DRU est
conforme aux exigences essentielles et aux autres dispositions
pertinentes de la directive 1999/5/CE.
Italiano[Italian]
Con la presente TRENDnet dichiara che questo TEW-810DRU è
conforme ai requisiti essenziali ed alle altre disposizioni pertinenti
stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
AršoTRENDnetdeklarē, ka TEW-810DRU deklarē, ka [type of
equipment / iekārtas tips] atbilst Direktīvas 1999/5/EK būtiskajām
prasībām un citiem ar to saistītajiem noteikumiem.
Lietuvių
[Lithuanian]
Šiuo TRENDnet deklaruoja, kad šis TEW-810DRU atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands
[Dutch]
Hierbij verklaart TRENDnet dat het toestel TEW-810DRU in
overeenstemming is met de essentiële eisen en de andere relevante
bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Magyar
[Hungarian]
Polski [Polish]
Hawnhekk, TRENDnet, jiddikjara li dan TEW-810DRU jikkonforma
mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm
fid-Dirrettiva 1999/5/EC.
Alulírott, TRENDnet nyilatkozom, hogy a TEW-810DRU megfelel a
vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv
egyéb elõírásainak.
Niniejszym TRENDnet oświadcza, że TEW-810DRU ] jest zgodny z
zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Português
[Portuguese]
TRENDnet declara que este TEW-810DRU está conforme com os
requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko
[Slovenian]
TRENDnet izjavlja, da je ta TEW-810DRU v skladu z bistvenimi
zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky
[Slovak]
TRENDnettýmtovyhlasuje, že TEW-810DRU spĺňa základné
požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
Svenska
[Swedish]
TRENDnet vakuuttaa täten että TEW-810DRU tyyppinen laite on
direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien
direktiivin muiden ehtojen mukainen.
Härmed intygar TRENDnet att denna TEW-810DRU står I
överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
© Copyright 2013 TRENDnet. All Rights Reserved.
57
Limited Warranty
TRENDnet User’s Guide
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TEW-810DRU – 3 Years Warranty
AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
If a product does not operate as warranted during the applicable warranty period,
TRENDnet shall reserve the right, at its expense, to repair or replace the defective
product or part and deliver an equivalent product or part to the customer. The
repair/replacement unit’s warranty continues from the original date of purchase. All
products that are replaced become the property of TRENDnet. Replacement products
may be new or reconditioned. TRENDnet does not issue refunds or credit. Please
contact the point-of-purchase for their return policies.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product by any unauthorized service center. This warranty is voided if (i) the
product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet within the applicable
warranty period and providing a copy of the dated proof of the purchase. Upon proper
submission of required documentation a Return Material Authorization (RMA) number
will be issued. An RMA number is required in order to initiate warranty service support
for all TRENDnet products. Products that are sent to TRENDnet for RMA service must
have the RMA number marked on the outside of return packages and sent to TRENDnet
prepaid, insured and packaged appropriately for safe shipment. Customers shipping
from outside of the USA and Canada are responsible for return shipping fees. Customers
shipping from outside of the USA are responsible for custom charges, including but not
limited to, duty, tax, and other fees.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS
WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE
OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST
OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT,
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY
ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR
PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY
OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN SHALL FAIL
OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Some TRENDnet products include software code written by third party developers.
These codes are subject to the GNU General Public License ("GPL") or GNU Lesser
General Public License ("LGPL").
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section
and look for the desired TRENDnet product to access to the GPL Code or LGPL Code.
These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of
the developers. TRENDnet does not provide technical support for these codes. Please go
to http://www.gnu.org/licenses/gpl.txt or http://www.gnu.org/licenses/lgpl.txt for
specific terms of each license.
PWP05202009v2
2013/9/26
© Copyright 2013 TRENDnet. All Rights Reserved.
58


---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2013:10:08 19:38:45+08:00
Create Date                     : 2013:09:26 17:31:24-07:00
Metadata Date                   : 2013:10:08 19:38:45+08:00
Creator Tool                    : Acrobat PDFMaker 10.0 for Word
Document ID                     : uuid:b581b2e2-e921-4733-bdd2-5fc945409aba
Instance ID                     : uuid:cb5fbc65-082f-4aec-8140-02fc1c8d236c
Subject                         : 6
Format                          : application/pdf
Title                           : test 3
Description                     : 
Creator                         : Jonathan
Producer                        : Adobe PDF Library 10.0
Keywords                        : 
Source Modified                 : D:20130927003108
Company                         : HP
Page Count                      : 59
Page Layout                     : OneColumn
Author                          : Jonathan

EXIF Metadata provided by EXIF.tools