TRENDNET TEW823824 AC1750 Dual Band Wireless Router, AC1750 Dual Band Wireless Router with StreamBoostTM Technology User Manual

TRENDNET, Inc. AC1750 Dual Band Wireless Router, AC1750 Dual Band Wireless Router with StreamBoostTM Technology

UserManual.wiki >

TRENDNET >

TEW823824 User Manual

User Manual.pdf

TEW-823DRUUser’s GuideAC 1750 Dual Band Wireless Router

TRENDnet User’s GuideTable of Contents2© Copyright 2014 TRENDnet. All Rights Reserved.Table of ContentsProduct Overview ........................................................................ 4Features .................................................................................................... 4Package Contents ..................................................................................... 4Hardware Overview .................................................................................. 5Front View ..................................................................................................... 5Rear View ...................................................................................................... 5Wireless Consideraons ........................................................................... 6Connecon Performance .............................................................................. 6Security Checklist .......................................................................................... 6Installaon ..................................................................................6Connect the Power ................................................................................... 6Connect the Computer ............................................................................. 6Check the Installaon ............................................................................... 7Inial Setup .................................................................................7Congure the Computer ........................................................................... 7Windows 7/8/8.1 .......................................................................................... 7Windows XP/2000 ........................................................................................ 7Windows Vista .............................................................................................. 7MAC OS 10.4/10.5/10.6 ............................................................................... 7Setup Wizard ............................................................................................ 8Basic Router Sengs ...................................................................8Log in to Management Page ..................................................................... 8Management Page Structure.................................................................... 9Wireless Sengs .................................................................................... 10Guest Network ....................................................................................... 12Parental Control ..................................................................................... 12Wireless Networking and Security .............................................14Tips to Improve Wireless Recepon ....................................................... 14Device Orientaon ...................................................................................... 15Choose the Security Type for Wireless Network .................................... 15Wireless Encrypon Types .......................................................................... 15Connect Wireless Devices using WPS ..................................................... 18Hardware Push Buon (PBC) Method (recommended) ............................. 18PBC (Soware/Virtual Push Buon) ........................................................... 18PIN (Personal Idencaon Number) ......................................................... 19Connect Wireless Devices Using MAC Filter ........................................... 19Advanced Wireless Sengs .................................................................... 20Mulple SSID Connecons .......................................................................... 20Wireless Bridging Using WDS ..................................................................... 21Advanced Sengs ...................................................................................... 23Advanced Router Sengs .......................................................... 24Congure Manually the Internet Connecon ......................................... 24Clone a MAC address .............................................................................. 25Change the IP Address ............................................................................ 25Congure the DHCP Server .................................................................... 26Congure DHCP Reservaon .................................................................. 26Add Stac Routes ................................................................................... 27Enable Dynamic Roung......................................................................... 28Enable/Disable UPnP .............................................................................. 29Idenfy Your Network on the Internet ................................................... 29Congure IPv6 Sengs ........................................................................... 30

TRENDnet User’s GuideTable of Contents3© Copyright 2014 TRENDnet. All Rights Reserved.Create Schedules .................................................................................... 30Congure Access Control Rules .............................................................. 31Block a specic service or mulple services ............................................... 31Block All Services ......................................................................................... 32Congure Inbound Filter Rules ............................................................... 32Congure Firewall Sengs ..................................................................... 33DMZ ............................................................................................................ 33Virtual Server .............................................................................................. 33Special Applicaons .................................................................................... 34Gaming ....................................................................................................... 35ALG .............................................................................................................. 36Enable Remote Access ............................................................................ 37Allow/Deny Ping Requests from the Internet ......................................... 37Congure Quality of Service Sengs ..................................................... 38Using External USB Storage .......................................................40Congure File Sharing Server ................................................................. 40Congure FTP Server .............................................................................. 41Maintenance .............................................................................42Change Login Password .......................................................................... 42Set the Date and Time ............................................................................ 42Backup System Sengs .......................................................................... 43Load System Sengs .............................................................................. 43Reset to Factory Defaults ....................................................................... 44Reboot the System ................................................................................. 44Update System Firmware ....................................................................... 44View Wireless Client List......................................................................... 45View System Informaon ....................................................................... 45IPv6 Status .................................................................................................. 47View Events Log ...................................................................................... 47Appendix ................................................................................... 48Regulatory and Safety Informaon......................................................... 48Federal Communicaon Commission Interference Statement .................. 48Europe – EU Declaraon of Conformity ..................................................... 48Specicaons .......................................................................................... 50

TRENDnet User’s GuideTEW-823DRU4© Copyright 2014 TRENDnet. All Rights Reserved.Product OverviewTRENDnet’s AC1750 Dual Band Wireless Router, model TEW-823DRU, produces the ulmate wireless experience with gigabit wireless speeds. Manage two wireless networks—the 1300 Mbps Wireless AC band for the fastest wireless available and the 450 Mbps Wireless N band to connect common wireless devices. The TEW-823DRU can easily handle the demands of mulple HD streams in a busy connected home. Features 9Compable with IEEE 802.11ac technology provides 3TX/3RX wireless speed up to 1300Mbps data rate. 9Compable with IEEE 802.11n high rate standard to provide wireless speed of 450Mbps data rate. 9Compable with IEEE 802.11g high rate standard to provide wireless speed of 54Mbps data rate. 9Simultaneously transmit both 2.4 GHz and 5 GHz wireless networks. 9IEEE 802.11b/g/n/ac Infrastructure operang modes. 94 x 10/100/1000Mbps Gigabit Ethernet port for LAN with Auto MDI-X funcon. 91 x 10/100/1000Mbps Gigabit Ethernet WAN port for ADSL / Cable Modem with Auto MDI-X funcon. 9Supports Mulple Input Mulple Output(MIMO) technology with 3TX/3RX(11a/b/g/n/ac). 9Allow auto fallback data rate for opmized reliability, throughput and transmission range. 9Supports enhance security for WPA-PSK, WPA2-PSK, WPA and WPA2. 9Advance wireless security of up to WPA2-RADIUS. 9Web-based conguraon tools and management via WEB Browser. 9Supports Wi-Fi Mulmedia(WMM). 9Supports WPS (Wi-Fi Protected Setup Specicaon Windows). 9Supports PPPoE / PPTP / L2TP protocol for ADSL. 9Supports NAT for share 1 IP address to all LAN user. 9Supports DHCP Server / Client. 9Supports Firewall protecon, Virtual server mapping, Special applicaon seng. 9Supports UPnP. 9Supports stascs informaon. 9Supports IPv6 (Internet Protocol v6). 9Supports Wireless Distribuon System (WDS) for wireless network bridging. 9Plug in a USB ash or storage drive to share content across the network.Package ContentsCheck if your package contains the following items. If any item is missing or appears damaged, contact your dealer.TEW-823DRU RouterPower adapter (12V, 2A) CD-ROM with User’s GuideQuick Start GuideRJ-45 Ethernet cable (1.5m / 5.) Mul- Language Quick Installaon Guide

TRENDnet User’s GuideTEW-823DRU5© Copyright 2014 TRENDnet. All Rights Reserved.Hardware OverviewFront View12No.: Item Descripon1 Power LEDLights up when the router is powered on.• Solid GREEN: Normal operaon.• Blinking GREEN: WPS is acvated.• O: No power. ÍNote: The LED will stop blinking and remains solid GREEN automacally aer the WPS process is completed.2Internet port (Link/Acvity) LEDLights up to indicate Internet connecon status.• Solid GREEN: Router is physically connected to the modem network or Ethernet port with a network or Ethernet cable.• Blinking GREEN: Data is transmied or received through the Internet port of the router.• O: No acve Internet connecon.Rear ViewPOWER4321USBWPSTEW-823DRU12V 2A123456No.: Item Descripon1 USB 2.0 port Connect USB storage devices to share over the network via FTP or Windows® SMB/CIFS, Samba.2WPS (Wi-Fi Protected Setup) buonPress to acvate WPS. ÍNote: The Power LED will blink when WPS is acvated.3 LAN ports 1~4 Connect the Ethernet cables from the router LAN ports to your wired network devices.4 Internet port Connect an Ethernet cable from the router Internet port to your modem.5 Power switch Push to switch the router on or o.6 DC-in port Connect the supplied DC power input connector here.

TRENDnet User’s GuideTEW-823DRU6© Copyright 2014 TRENDnet. All Rights Reserved.Wireless ConsideraonsConnecon PerformanceA number of factors aect the performance of wireless connecon. Consider the following guidelines to ensure high-range and stable connecvity. 9Keep the router and other wireless devices away from obstrucons, such as walls or buildings. Each obstrucon can reduce the range of a wireless device. 9Keep the router and other wireless devices away from devices that produce radio frequency (RF) noise, such as microwave ovens or radios. 9Keep the router and other wireless devices away from any device operang on the 2.4GHz frequency, such as cordless phones or remote controls. 9Antenna orientaon aects the wireless signal. Determine the best orientaon and adjust the antenna posion of your device.Security ChecklistWireless networks are easy to install and convenient to use. However, wireless network signals can also be intercepted easily. To prevent unauthorized users from connecng to your wireless network, follow the guidelines below. 9Change the default wireless network name.  Your device has a default Service Set Idener (SSID) which is the wireless network name. Change the SSID with a unique name to idenfy your network. The SSID can be up to 32 characters in length. 9Change the default password.  Your device has a default password. You have to enter this password to change your network sengs. Change the password to prevent unauthorized user from intruding into your network and changing the sengs. 9Enable MAC address ltering.  Your device supports Media Access Control (MAC) address ltering. You can assign a MAC address on each computer that you want to connect to your wireless network. When MAC address ltering is enabled, only the computers with the specied MAC addresses are allowed access. 9Enable encrypon  Your device supports Wired Equivalent Privacy (WEP), and Wi-Fi Protected Access (WAP/WPA2) encrypon. To ensure a high level of security, enable the highest security encrypon and use strong passphrases, avoid using words that can be found in the diconary.InstallaonMake sure that all devices are powered o before starng installaon. POWER4321USBWPSTEW-823DRU12V 2AConnect the Power1 Connect the power adapter to the power port of your router.2 Plug the power adapter to a power outlet.3 Push the Power buon to turn your router on. ÍNote: Use only the supplied power adapter. Using other power adapters may cause damage to the device.Connect the Computer1 Connect one end of the RJ-45 cable to the LAN port of your router.2 Connect the other end of the RJ-45 cable to the LAN port of the computer.

TRENDnet User’s GuideTEW-823DRU7© Copyright 2014 TRENDnet. All Rights Reserved.Check the InstallaonTo ensure that all devices are properly connected, check the LED indicators on the front of your router. For basic installaon, the following LED must be lit: 9Power LED 9Internet port LEDThe lighted LED indicators vary depending on the type of connecon that you make. Refer to “Front View” on page 5 for more informaon about the LED indicators.Inial SetupCongure the Computer ÍNote: The following procedures on conguring the network sengs can be used as general guidelines. It is strongly recommended that you consult your computer or operang system manufacturer directly for assistance on the proper procedure for conguring the network sengs.Windows 7/8/8.11 Open Control Panel and click Network and Sharing Center.2 Click Change Adapter Sengs and right-click the Local Area Connecon icon.3 Click Properes > Internet Protocol Version 4 (TCP/IPv4).4 Click Obtain an IP address automacally and click OK.Windows XP/20001 Open Control Panel and double-click the Network Connecon icon.2 Right-click the Local Area Connecon icon and then click Properes.3 Click Internet Protocol (TCP/IP) > Properes.4 Click Obtain an IP address automacally and click OK.Windows Vista1 Open Control Panel and click Network and Internet.2 Click Manage Network Connecons and right-click the Local Area Connecon icon > Properes.3 Click Internet Protocol Version (TCP/IPv4) > Properes.4 Click Obtain an IP address automacally and click OK.MAC OS 10.4/10.5/10.61 From the Apple, drop-down list, select System Preferences.2 Click the Network icon.3 From the Locaon drop-down list, select Automac.4 Select and view your Ethernet connecon. Do one of the following: ͫIn MAC OS 10.4, from the Show drop-down list, select Built-in Ethernet and select the TCP/IP tab. ͫ In MAC OS 10.5/10.6, in the le column, select Ethernet.

TRENDnet User’s GuideTEW-823DRU8© Copyright 2014 TRENDnet. All Rights Reserved.5 Congure TCP/IP to use DHCP. Do one of the following: ͫIn MAC 10.4, from the Congure IPv4, drop-down list, select Using DHCP and click the Apply Now buon. ͫIn MAC 10.5, from the Congure drop-down list, select Using DHCP and click the Apply buon.6 Restart your computer. ÍNote: If you are experiencing dicules, please contact your computer or operang system manufacturer for assistance.Setup Wizard1 Open your web browser and enter the URL/domain name hp://tew-823dru or IP address hp://192.168.10.1. The wizard will automacally appear. ÍNote: If you have already congured your router before, the wizard will no longer appear automacally. In your web browser, enter hp://tew-823dru or you can access the router management using the default IP address hp://192.168.10.1. Your router will prompt you for a user name and password. Enter your user name and password and click Advanced > Setup > Wizard.2 Follow the on-screen instrucons to congure your Internet Connecon.Basic Router SengsLog in to Management Page ÍNote: You can access your through the use of your Internet web browser, such as Internet Explorer®, Firefox®, Chrome™, Safari®, Opera™.1 Open your web browser and enter the URL/domain name hp://tew-823dru or IP address hp://192.168.10.1.2 Enter the user name, password, and select your preferred language. ÍNote: ͳThe default user name is “admin”. ͳFor security purposes, the router is precongured with a unique password. You can nd the Password on a scker on the side of the router and on the label on the boom of the router. ͳUser name and password are case sensive.3 Click Login.

TRENDnet User’s GuideTEW-823DRU9© Copyright 2014 TRENDnet. All Rights Reserved.The management page opens. Management Page StructureBasic• Network Status• Wireless 2.4GHz Sengs & Security 5GHz Sengs & Security• Guest Network• Parental Control MAC/IP Address Filter Website FilterAdvanced• Administrator Status Informaon IPv6 Status Informaon System Log Advanced Network (UPnP) Sengs Management (Export/Import conguraon / Reset to factory default / Reboot) Time and Date Sengs• Setup LAN Sengs (IP Address Sengs / DHCP Server Seng / DHCP Reservaon) WAN Sengs Roung IPv6 Sengs Schedule Firmware Management (Administrator Password / Dynamic DNS / Remote Management)Advanced (connued) QoS Wizard• Wireless 2.4GHz WDS Advanced Mulple SSID MAC Filter (Wireless) WPS Staon List• Wireless 5GHz WDS Advanced Mulple SSID MAC Filter (Wireless) WPS Staon List• Security Access Control (IP Protocol Filter) Inbound Filter• Firewall DMZ Virtual Server Special Applicaons Gaming ALG• USB File Sharing Server FTP Server

TRENDnet User’s GuideTEW-823DRU10© Copyright 2014 TRENDnet. All Rights Reserved.Wireless SengsBasic > Wireless (2.4GHz or 5GHz) ÍNote: Refer to “Choose the Security Type for Wireless Network” on page 15 for informaon on choosing the security type for wireless network.This secon allows you to congure the basic sengs required for your wireless network such as your wireless network name (SSID) and Wi-Fi key.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Basic > Wireless tab.3 Modify any of the sengs in Wireless 2.4GHz or Wireless 5GHz secon and click Apply to save the changes. ͫRadio On/O: Click the radio on/o buon to enable/disable the wireless radio. ÍNote: It is recommended to keep wireless radios enabled.  New Schedule: Click New Schedule to select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Please refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule. ͫWireless Mode: Select the appropriate transmission mode. When applying the Wireless Mode seng, please keep in mind the following: ͳ Wireless devices that support 802.11n are backwards compable and can connect wirelessly at 802.11g or 802.11b. ͳ Wireless devices that support 802.11ac are backwards compable and can connect wirelessly at 802.11n or 802.11a. ͳ Connecng at 802.11b or 802.11g will limit the capability of your 802.11n supported wireless devices from obtaining higher performance and data rates. ͳ Connecng at 802.11a or 802.11n will limit the capability of your 802.11ac supported wireless devices from obtaining higher performance and data rates. ͳAllowing 802.11b or 802.11g devices to connect to an 802.11n capable wireless network may degrade the wireless network performance below the higher performance and data rates of 802.11n. ͳAllowing 802.11a or 802.11n devices to connect to an 802.11ac capable wireless network may degrade the wireless network performance below the higher performance and data rates of 802.11ac. ͳWireless devices that only support 802.11n or 802.11a will not be able to connect to a wireless network that is set to 802.11ac only mode. ͳWireless devices that only support 802.11b or 802.11g will not be able to connect to a wireless network that is set to 802.11n only mode. ͳWireless devices that only support 802.11b will not be able to connect to a wireless network that is set to 802.11g only mode. ͳWireless devices that only support 802.11a will not be able to connect to a wireless network that is set to 802.11n only mode.Wireless 2.4GHzWireless 5GHz ͫWireless Network Name (SSID): Enter the wireless name (SSID) for your wireless network. ÍNote: This acronym stands for Service Set Idener and is the name of your wireless network. It dierenates your wireless network from others around you.  By default, the router’s wireless name is unique to the device. If you choose to  change the SSID, change it to a name that you can easily remember.

TRENDnet User’s GuideTEW-823DRU11© Copyright 2014 TRENDnet. All Rights Reserved. ͫBroadcast Network Name (SSID) ͳEnable: Allows wireless devices to search and discover your wireless network name (also called SSID) broadcasted by your router. ͳDisable: Turns o the ability for wireless devices to nd your network. It is sll possible for wireless devices to be congured to connect to your wireless network. Disabling this seng will disable WPS funconality. ͫEnable Auto Channel Scan: Check this opon to set your router to scan for which wireless channels to use automacally. ͫFrequency (Channel): Selecng the Auto opon will set your router to scan for the appropriate wireless channel to use automacally. Click the drop-down list and select the desired Channel for wireless communicaon. The goal is to select the Channel that is least used by neighbouring wireless networks. ͫChannel Width: Select the appropriate channel width for your wireless network. This seng only applies to 802.11n and 802.11ac. ͳFor greater 802.11n performance, select Auto 20/40MHz. ͳFor greater 802.11ac performance, select Auto 20/40/80MHz.  It is recommended to use the default channel width sengs. ÍNote: Please note that the default sengs may provide more stability than the higher channel bandwidth sengs such as Auto 20/40/80MHz for connecvity in busy wireless environments where there are several wireless networks in the area. ͳ20MHz: This mode operates using a single 20MHz channel for wireless devices connecng at 802.11n on both 2.4GHz and 5GHz. This seng may provide more stability than 20/40MHz (Auto) for connecvity in busy wireless environments where there are several neighbouring wireless networks in the area. ͳAuto 20/40MHz (11n) or Auto 20/40/80MHz (11ac): When this seng is acve, this mode is capable of providing higher performance only if the wireless devices support the channel width sengs. Enabling Auto 20/40MHz or Auto 20/40/80 MHz typically results in substanal performance increases when connecng an 802.11ac/n wireless client.4 In Security secon, click Security Mode drop-down list to select your wireless security type.For more informaon on security, refer to “Choose the Security Type for Wireless Network” on page 15.

TRENDnet User’s GuideTEW-823DRU12© Copyright 2014 TRENDnet. All Rights Reserved.Guest NetworkBasic > Guest Network (2.4GHz or 5GHz)Creang an isolated and separate wireless guest network (2.4GHz or 5GHz) allows wireless clients to connect to your network for Internet access only and keep your local LAN network safe by restricng guest access to your LAN network resources such as shared documents and media les on your computers, network storage, and printers.1 Log into your router management page (refere to “Log in to Management Page” on page 8).2 Click on Basic > Guest Network tab.3 Modify any of the sengs in Guest Network - 2.4GHz or Guest Network - 5GHz secon and click Apply to save the changes. ͫRadio On/O: Check this opon to enable the wireless guest network.  New Schedule: Click New Schedule to select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Please refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule. ͫWireless Network Name (SSID): Enter the wireless name (SSID) for your wireless network.Wireless 2.4GHzWireless 5GHz ͫWLAN Paron: When this opons is enabled, wireless client devices connected to your guest network(s) will be restricted from accessing other guests. ͫInternet Access Only: When this opon is checked, wireless client devices connected to your guest network(s) will be restricted from accessing your private LAN and wireless clients connected to your primary wireless network, Internet access only. If unchecked, allows wireless client devices connected your guest network(s) complete access to your private LAN, primary wireless network, and Internet.4 In Security secon, click Security Mode drop-down list to apply a dierent wireless security type and key to the guest network.For more information on security, refer to “Choose the Security Type for Wireless Network” on page 15.Parental ControlBasic > Parental ControlParental control sengs allow you to set up restricons/lters specically who is allowed or denied access to your network for a specied period of me and restricted access to web content.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Basic > Parental Control tab.3 Add an access rule. Access Rule (MAC/IP Filter)  Every network device has a unique, 12-digit MAC (Media Access Control) address. Every network device must be assigned or congured with a specic IP address in order to communicate with your network which is typically assigned by your router DHCP server automacally. Using access rules, you can deny specic computers and other devices from using this router’s wired or wireless network by specifying the MAC address or IP address. ͫRule Enable: Check the checkbox to enable the access rule.

TRENDnet User’s GuideTEW-823DRU13© Copyright 2014 TRENDnet. All Rights Reserved.5 In Website Filter secon, congure the website lter. Website Filter  You may want to block computers or devices on your network access to specic websites (e.g. www.xxxxxxxxx.com, etc.), also called domains or URLs (Uniform Resource Locators). You may also apply a schedule when these websites are allowed or denied. ͫDisable: Disables website ltering. ͫDENY computers access to ONLY these sites: Only Deny computers/devices access to the listed websites and allow access to others. ͫALLOW computers access to ONLY these sites: Only Allow computers/devices access to the listed websites and deny access to others.6 Do the following to add a web pages URL lter rule. ͫRule Enable: Check the checkbox to enable the access rule. ͫRule Name: Enter the rule name. ͫURL: Enter a URL (ex. www.xxxxxxxx.com) to apply for the lter or block. ͫSchedule (Oponal): Select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Please refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule.  7 Click Add to add the access rule to the Access Rule List. Wait of the rule to be added. ͫRule Name: Enter the rule name. ͫAddress Type: Select which Address Type to apply the lter. (MAC Address or IP Address).  Note: If your device is not listed, please refer to your computer or device documentaon to nd the MAC address. ͫIP Address/MAC Address: Manually enter the MAC Address or IP Address in the eld. ÍNote: If the network device is connected to your router, you can also click the drop-down list to choose one of the network devices (MAC Address/IP Address) detected by your router. ͫSchedule (Oponal): Click to select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Please refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule.  4 Click Add to add the access rule to the Access Rule List. Wait of the rule to be added. Note: ͳClicking Reset will discard your sengs and clear all elds. ͳIn the Access Rule List, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.

TRENDnet User’s GuideTEW-823DRU14© Copyright 2014 TRENDnet. All Rights Reserved. Note: ͳClicking Reset will discard your sengs and clear all elds. ͳIn the URL Filter Rule List, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.Wireless Networking and SecurityTips to Improve Wireless ReceponThere are a number of factors that can impact the range of wireless devices. Follow these ps to help improve your wireless connecvity:• Keep the number of obstrucons to a minimum. Each obstrucon can reduce the range of a wireless device. Posion the wireless devices in a manner that will minimize the amount of obstrucons between them. ͫFor the widest coverage area, install your router near the center of your home, and near the ceiling, if possible. ͫ Avoid placing the router on or near metal objects (such as le cabinets and metal furniture), reecve surfaces (such as glass or mirrors), and masonry walls. ͫ Any obstrucon can weaken the wireless signal (even non-metallic objects), so the fewer obstrucons between the router and the wireless device, the beer. ͫ Place the router in a locaon away from other electronics, motors, and uorescent lighng. ͫ Many environmental variables can aect the router’s performance, so if your wireless signal is weak, place the router in several locaons and test the signal strength to determine the ideal posion.• Building materials can havea inuence on your wireless signal. In an indoor environment, try to posion the wireless devices so that the signal passes through less dense material such as dry wall. Dense materials like metal, solid wood, glass or even furniture may block or degrade the signal.• Antenna orientaon can have inuence on your wireless signal. Use the wireless adapter’s site survey tool to determine the best antenna orientaon for your wireless devices.• Interference from devices that produce RF (radio frequency) noise can have inuence on your signal. Posion your wireless devices away from anything that generates RF noise, such as microwaves, radios and baby monitors.If possible, upgrade wireless network interfaces (such as wireless cards in computers) from older wireless standards to 802.11n or 802.11ac. If a wirelessly networked device uses an older standard, the performance of the enre wireless network may be slower. If you are sll experiencing low or no signal consider reposioning the wireless devices, installing addional access points or wireless extenders.

TRENDnet User’s GuideTEW-823DRU15© Copyright 2014 TRENDnet. All Rights Reserved.Device OrientaonThe antenna conguraon has been opmized for performance and connecvity when wireless client devices are located on either side of the router compare to the front (LED panel) or back (Ports).Choose the Security Type for Wireless NetworkSeng up wireless security is very important. Leaving your wireless network open and insecure could expose your enre network and personal les to outsiders. TRENDnet recommends reading through this enre secon and seng up wireless security on your new router.There are a few dierent wireless security types supported in wireless networking each having its own characteriscs which may be more suitable for your wireless network taking into consideraon compability, performance, as well as the security strength along with using older wireless networking hardware (also called legacy hardware).It is strongly recommended to enable wireless security to prevent unwanted users from accessing your network and network resources (personal documents, media, etc.).In general, it is recommended that you choose the security type with the highest strength and performance supported by the wireless computers and devices in your network. Please review the security types to determine which one you should use for your network.Wireless Encrypon Types• WEP: Legacy encrypon method supported by older 802.11b/g hardware. This is the oldest and least secure type of wireless encrypon. It is generally not recommended to use this encrypon standard, however if you have old 802.11 b or 802.11g wireless adapters or computers with old embedded wireless cards(wireless clients), you may have to set your router to WEP to allow the old adapters to connect to the router. ÍNote: This encrypon standard will limit connecon speeds to 54Mbps.• WPA: This encrypon is signicantly more robust than the WEP technology. Much of the older 802.11g hardware was been upgraded (with rmware/driver upgrades) to support this encrypon standard. Total wireless speeds under this encrypon type however are limited to 54Mbps.• WPA-Auto: This seng provides the router with the ability to detect wireless devices using either WPA or WPA2 encrypon. Your wireless network will automacally change the encrypon seng based on the rst wireless device connected. For example, if the rst wireless client that connects to your wireless network uses WPA encrypon your wireless network will use WPA encrypon. Only when all wireless clients disconnect to the network and a wireless client with WPA2 encrypon connects your wireless network will then change to WPA2 encrypon. ÍNote: WPA2 encrypon supports 802.11n speeds and WPA encrypon will limit your connecon speeds to 54Mbps.• WPA2: This is the most secure wireless encrypon available today, similar to WPA encrypon but more robust. This encrypon standard also supports the highest connecon speeds. TRENDnet recommends seng your router to this encrypon standard. If you nd that one of your wireless network devices does not support WPA2 encrypon, then set your router to either WPA or WPA-Auto encrypon. ÍNote: Check the specicaons of your wireless network adapters and wireless appliances to verify the highest level of encrypon supported.

TRENDnet User’s GuideTEW-823DRU16© Copyright 2014 TRENDnet. All Rights Reserved.The following table is a brief comparison chart of the wireless security types and the recommended conguraon depending on which type you choose for your wireless network.Security Standard WEP WPA WPA2Compable Wireless StandardsIEEE 802.11a/b/g (802.11n devices will operate at 802.11g to connect using this standard)IEEE 802.11a/b/g(802.11n devices will operate at 802.11g to connect using this standard)IEEE 802.11a/b/g/n/acHighest Performance Under This SengUp to 54Mbps Up to 54Mbps Up to 300Mbps (11n) or 867Mbps (11ac)Encrypon Strength Low Medium HighAddional Opons Open System or Shared Key,HEX or ASCII,Dierent key sizesTKIP or AES, Preshared Key or RADIUSTKIP or AES, Preshared Key or RADIUSRecommended ConguraonOpen System ASCII13 charactersTKIPPreshared Key8-63 charactersAESPreshared Key8-63 characters ÍNote: The compable wireless standard depends on the data rate supported by the device:• 802.11n: 150Mbps.• 802.11ac: 433Mbps, 867Mbps. Selecng WEP  If selecng WEP (Wired Equivalent Privacy), please review the WEP sengs to congure and click Apply to save the changes. ͫSecurity Mode: Choose WEP-OPEN, WEP-SHARED, or WEP-AUTO. ÍNote: It is recommended to use Open because it is known to be more secure than Shared Key. ͫDefault Key: Enter the WEP key. This is the password or key that is used to connect your computer to this router wirelessly. You can enter 64-bit or 128-bit key. You can enter up to four keys but only the one chosen as the Default Key will be used. ÍNote: It is recommended to use 128-bit because it is more secure to use a key that consists of more characters. ͫHex/ASCII: Enter the WEP key format. Refer to the table below for the acceptable characters and lengths for each format.WEP Key Format HEX ASCIICharacter set 0-9 & A-F, a-f only Alphanumeric (a,b,C,?,*, /,1,2, etc.)64-bit key length 10 characters 5 characters128-bit key length 26 characters 13 characters

TRENDnet User’s GuideTEW-823DRU17© Copyright 2014 TRENDnet. All Rights Reserved. Selecng WPA-PSK / WPA2-PSK / WPA2-Personal Mixed In the Security Mode drop-down list, select WPA-PSK, WPA2-PSK,or WPA2-Personal Mixed. Please congure the sengs and click Apply to save the changes. ÍNote: If selecng WPA or WPA2 security along with the TKIP cipher, the device will be limited to operate in 802.11a/g modes with data rates up to 54Mbps. The following secon outlines opons when selecng WPA-PSK, WPA2-PSK,or WPA2-Personal Mixed, ͫWPA Cipher: The available Cipher Type for WPA-PSK is TKIP and for WPA2-Personal Mixed is TKIP/AES. For WPA2-PSK the default Cipher Type is AES but if you need the backward-compability (so it would accept WPA connecons), choose TKIP/AES ͫWPA Pre-Shared Key: Enter the passphrase. ͳThis is the password or key that is used to connect your computer to this router wirelessly. Key Format: 8-63 alphanumeric characters (a,b,C,?,*, /,1,2, etc.). ͫKey Update Interval: Enter the me interval (seconds) of when the network passphrase will rotate. ÍNote: It is recommended to use the default interval me. Your passphrase will not change, rotaon of the key is part of the WPA protocol and designed to increase security. Selecng WPA / WPA2 / WPA2-Enterprise Mixed In the Security Mode drop-down list, select WPA, WPA2, or WPA2-Enterprise Mixed. Please congure the sengs and click Apply to save the changes. ÍNote: ͳIf selecng WPA or WPA2 security along with the TKIP cipher, the device will be limited to operate in 802.11a/g modes with data rates up to 54Mbps. ͳThis security type requires an external RADIUS server. The following secon outlines opons when selecng WPA, WPA2, or WPA2-Enterprise Mixed, ͫWPA Cipher: The available Cipher Type for WPA is TKIP and for WPA2-Enterprise Mixed is TKIP/AES. For WPA2 the default Cipher Type is AES but if you need the backward-compability (so it would accept WPA connecons), choose TKIP/AES. ͫKey Update Interval: Enter the me interval (seconds) of when the network passphrase will rotate. ÍNote: It is recommended to use the default interval me. Your passphrase will not change, rotaon of the key is part of the WPA protocol and designed to increase security. ͫIP Address: Enter the IP address of the RADIUS server. For example, 192.168.10.250.

TRENDnet User’s GuideTEW-823DRU18© Copyright 2014 TRENDnet. All Rights Reserved. ͫPort: Enter the port your RADIUS server is congured to use for RADIUS authencaon. ÍNote: It is recommended to use port 1812 which is the default RADIUS port. ͫShared Secret: Enter the shared secret used to authorize your router with your RADIUS server.Connect Wireless Devices using WPSWPS (Wi-Fi Protected Setup) is a feature that makes it easy to connect devices to your wireless network. If your wireless devices support WPS, you can use this feature to easily add wireless devices to your network. ÍNote: You will not be able to use WPS if you set the SSID Broadcast seng to Disabled or if you are using WEP security.There are two methods the WPS feature can easily connect your wireless devices to your network:• Push Buon Conguraon (PBC) method: ͳ Hardware Push Buon method–with an external buon located physically on your router and on your client device (recommended). ͳ WPS Soware/Virtual Push Buon - located on router management page.• PIN (Personal Idencaon Number) Method - located on router management page. ÍNote: Please refer to your wireless device documentaon for details on the operaon of WPS.Hardware Push Buon (PBC) Method (recommended)It is recommended that a wireless key (passphrase or password) is created before connecng clients using the PBC method. By default your router is precongured with a wireless encrypon key. If no wireless key is dened when connecng via PBC, the router will automacally create an encrypon key that is 64 characters long. This 64 character key will then have to be used if one has to connect computers to the router using the tradional connecon method.To add a wireless device to your network, simply push the WPS buon on the wireless device you are connecng (consult client device User’s Guide for length of me), then push and hold the WPS buon located on your router for 3 seconds and release it. The WPS LED will blink to indicate WPS has been acvated on your router. Please refer to “Product Overview” on page 4.For connecng addional WPS supported devices, repeat this process for each addional device.PBC (Soware/Virtual Push Buon)Advanced > Wireless (2.4GHz or 5GHz) > WPSIn addion to the hardware push buon located physically on your router, the router management page also has push buon which is a soware or virtual push buon you can click to acvate WPS on your router.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Wireless (2.4GHz or 5GHz) > WPS > WPS Acon.3 To add a wireless device to your network, next to PBC, click the Start Push Buon buon. Then push the WPS buon on the wireless device (consult wireless device’s User’s Guide for length of me) you are connecng.4 Wait for your router to nish the WPS process. ÍNote: You should see a message on your WPS client device indicang the WPS was successful.

TRENDnet User’s GuideTEW-823DRU19© Copyright 2014 TRENDnet. All Rights Reserved.PIN (Personal Idencaon Number)Advanced > Wireless (2.4GHz or 5GHz) > WPSIf your wireless device has WPS PIN (typically an 8-digit code printed on the wireless device product label or located in the wireless device wireless soware ulity), you can use this method.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Wireless (2.4GHz or 5GHz) > WPS > WPS Acon.3 To add a wireless device to your network, next to PIN, enter the 8-digit numeric PIN number of the wireless client device and click Start PIN. ÍNote: You may need to iniate the WPS PIN on your wireless device rst when using this method. Please refer to your wireless device documentaon for details on the operaon of WPS.4 Wait for your router to nish the WPS process. ÍNote: You should see a message on your WPS client device indicang the WPS was successful.Connect Wireless Devices Using MAC FilterAdvanced > Wireless (2.4GHz or 5GHz) > SecurityThis MAC lter is dedicated to lter on each band and each SSID. Every network device has a unique, 12-digit MAC (Media Access Control) address. Every network device must be assigned or congured with a specic IP address in order to communicate with your network which is typically assigned by your router DHCP server automacally. Using access rules, you can deny specic computers and other devices from using this router’s wired or wireless network by specifying the MAC address or IP address.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Wireless (2.4GHz or 5GHz) > Security > Wireless MAC Filter.3 Review the MAC Filter opons. Click Apply to save changes. Select SSID ͫSelect SSID: If you have mulple SSIDs congured, click the drop-down list to select which SSID to apply the MAC lter. Wireless MAC Filter ͫFilter Mode: ͳDisabled: Disables MAC address lter. ͳAllow (listed computes access and deny all others): Selecng this funcon allows computers/devices with MAC addresses listed to access the local network (LAN/WLAN), web management, and the Internet. ͳDENY listed computes access and deny all others: Selecng this funcon denies computers/devices with MAC addresses listed from access to the local network (LAN/WLAN), web management, and the Internet. ͫMAC Address: Enter the MAC address of the wireless device to apply to this lter.

TRENDnet User’s GuideTEW-823DRU20© Copyright 2014 TRENDnet. All Rights Reserved.Advanced Wireless SengsThe advanced wireless features provide can provide you with addional opons for seng up your wireless network such as mulple SSID and WDS (Wireless Distribuon System) or wireless bridging.Mulple SSID ConneconsAdvanced > Wireless (2.4GHz or 5GHz) > SecurityThe mulple SSID feature allows you to broadcast up to 2 SSIDs (or wireless network names). When wireless devices are searching for available wireless networks to connect to, the SSIDs (or wireless network names) will appear as separate and dierent wireless networks. Since they appear as separate wireless networks, they are also referred to as virtual APs (Access Points) since they appear as separate wireless access points but are actually all being broadcasng and managed by a single wireless access point. Each virtual AP can be congured each with a dierent SSID (or wireless network name), security type and addional sengs for wireless devices to connect. You can use the mulple SSID feature to setup guest wireless accounts with a dierent security type to keep your primary wireless network security informaon private. The diagram shows an example of a client connecng to SSID 1 and another client connecng to SSID 2.LAN AClient 1Client 2TEW-823DRUNotebook with Wireless N PC CardNotebook with Wireless N PC CardCable DSL ModemTo congure mulple SSID on your router, do the following:1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Wireless (2.4GHz or 5GHz) > Mulple SSID.3 In Mulple SSID1 or SSID2, congure the following parameters: ͫRadio On/O: Check the checkbox to enable the addional SSID. ͳNew Schedule: The schedule funcon allows you to dene a schedule when the addional SSID should be turned on. To dene a new schedule, click New Schedule and refer to “Create Schedules” on page 30. Aer you have created a new schedule, click the drop-down list and the new schedule will be available for selecon. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Please refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule. ͫWireless Network Name (SSID): Enter the wireless name (SSID) for addional SSID. 4 In Security secon, click Security Mode drop-down list to apply a dierent wireless security type and key to the guest network.

TRENDnet User’s GuideTEW-823DRU21© Copyright 2014 TRENDnet. All Rights Reserved.The following diagram shows an example of a client connecng to SSID 1 and another client connecng to SSID 2.LAN AClient 1Client 2TEW-823DRUNotebook with Wireless N PC CardNotebook with Wireless N PC CardCable DSL ModemSSID 1: trendnet1SSID 2: trendnet25 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.Wireless Bridging Using WDSAdvanced > Wireless (2.4GHz or 5GHz) > WDSWireless bridging using WDS allows the device to create a wireless bridge with other WDS supported wireless routers and access points congured in WDS mode to bridge groups of network devices together wirelessly. Simultaneously, the router will also funcon in access point mode allowing wireless client devices such as computers, game consoles, mobile phones, etc. to connect in order to access network resources from mulple groups of network devices as well as the Internet. ÍNote: You can create up to four WDS bridge connecons on each wireless band (2.4GHz and 5GHz). WDS (Wireless Distribuon System) is not currently standardized and may not connect to dierent model wireless routers or access points, therefore, when using WDS, it is recommended to use the same model and version for wireless bridging.By default, your router funcons in Access Point mode to allow wireless client devices to connect and access your network resources and access the Internet.The diagram below shows your router in Access Point mode and clients connecng to your router.LAN AClient 1Client 2TEW-823DRUNotebook with Wireless N PC CardNotebook with Wireless N PC CardCable DSL Modem ÍNote: Before conguring WDS, please ensure the following rst: ͳMake sure dierent IP addresses are assigned to each WDS supported device used for bridging to avoid IP address conict. For example, 192.168.10.1; 192.168.10.2; 192.168.10.3. Refer to “Change the IP Address” on page 25 for changing the LAN IP address. ͳIf you are using more than one WDS supported router, ensure the LAN DHCP server is enabled on only one router and disabled on all the others to avoid IP address conict. Refer to “Congure the DHCP Server” on page 26 for DHCP server opons. ͳCongure the same wireless channel and use the same on all WDS supported wireless devices. Refer to “Wireless Sengs” on page 10 for conguring basic wireless sengs. ͳCongure the same wireless security and key on all WDS supported devices. Refer to “Wireless Sengs” on page 11 for conguring wireless security sengs.

TRENDnet User’s GuideTEW-823DRU22© Copyright 2014 TRENDnet. All Rights Reserved.To congure WDS bridging between TEW-823DRU routers, do the following:1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Wireless (2.4GHz or 5GHz) > WDS.3 Click on the WDS drop-down list and select Enable.IMPORTANT: Ensure the basic wireless security (Basic > Wireless > Security) on router is set to WEP or Disabled mode. WDS cannot funcon in WPA or WPA2 mode. ÍNote: Click Site survey to search for Access Point’s MAC address to connect.4 Enter the MAC address of the other WDS supported wireless device you are bridging. For example, 00:11:22:AA:BB:CC.5 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.For addional routers, make sure to disable the DHCP server rst on all addional routers and congure the LAN IP address to be dierent on each router. You will connect devices to the LAN ports 1-4 only on all addional routers and the WAN port is not used. Then, repeat the steps for addional routers you are bridging.The following illustraon shows the access point with WDS enabled connecon diagram.Access point mode conneconWireless bridged conneconClient 1 (AP2)Client 1 (AP3)Client 1 (AP1)WDS Bridge 1WDS Bridge 2Cable DSL ModemLAN A LAN AAP1AP2AP3TEW-823DRUTEW-823DRUTEW-823DRU(LAN DHCP Server Disabled)(IP Address: 192.168.10.1)(LAN DHCP Server Disabled)(IP Address: 192.168.10.3)LAN ANetwork with Wireless N PC Card(LAN DHCP Server Disabled)(IP Address: 192.168.10.2)

TRENDnet User’s GuideTEW-823DRU23© Copyright 2014 TRENDnet. All Rights Reserved.Advanced SengsAdvanced > Wireless (2.4GHz or 5GHz) > AdvancedThese sengs are advanced opons that can be congured to change advanced wireless broadcast specicaons. It is recommended that these sengs remain set to their default values unless you are knowledgeable about the eects of changing these values. Changing these sengs incorrectly can degrade performance.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Wireless (2.4GHz or 5GHz) > Advanced.3 In Advanced Wireless secon, congure the following parameters: ͫBeacon Period: A beacon is a management frame used in wireless networks that transmied periodically to announce the presence and provide informaon on the router’s wireless network. The interval is the amount me between each beacon transmission.  Default Value: 100 milliseconds (range: 100-1000) ͫDTIM: A DTIM is a countdown informing clients of the next window for listening to broadcast and mulcast messages. When the wireless router has buered broadcast or mulcast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Wireless clients detect the beacons and awaken to receive the broadcast and mulcast messages. The default value is 1. Valid sengs are between 1 and 255. ͫFragment Threshold: Wireless frames can be divided into smaller units (fragments) to improve performance in the presence of RF interference and at the limits of RF coverage. Fragmentaon will occur when frame size in bytes is greater than the Fragmentaon Threshold. This seng should remain at its default value of 2346 bytes. Seng the Fragmentaon value too low may result in poor performance. ͫRTS Threshold: The Request To Send (RTS) funcon is part of the networking protocol. A wireless device that needs to send data will send a RTS before sending the data in queson. The desnaon wireless device will send a response called Clear to Send (CTS). The RTS Threshold denes the smallest data packet size allowed to iniate the RTS/CTS funcon.  Default Value: 2347 (range: 1-2347). ͫTX Power: This seng allows you to adjust the wireless transmit power to a lower seng. In busy wireless environments, lowering the transmit power may improve beer performance and connecvity and decrease interference with neighbouring wireless networks. ͫShort Preamble: Using a short preamble can potenally increase throughput as the transfer me is 96 microseconds versus the more commonly used long preamble 192 microseconds. However, using a short preamble is not supported using 802.11b legacy devices, in some cases cause wireless interoperability issues, and increase the error rate in some installaons. The preamble is the informaon sent from the wireless transmier to the receiver indicang when data is incoming.4 In HT Physical Mode secon, congure the following parameters: ͫ20/40 Coexistence (2.4GHz only): 20/40MHz Coexistence allows for the auto-fallback from 40MHz to 20MHz channel width operaon when neighbouring 802.11 wireless networks are detected. ͫGuard Interval: Using a short (400ns) guard interval can increase throughput. However, it can also increase error rate in some installaons, due to increased sensivity to radio-frequency reecons. ͫMCS: Allows you to lock down the wireless transmission rate. ͫExtension channel: Allows you to assign either the upper or lower extension channels to use for channel bonding when establishing connecvity at the higher channel widths 40MHz and 80MHz. ͫA-MPDU: Using Aggregate Mulple Protocol Data Unit will allow the all frames transmied to be aggregated into larger size A-MPDU formaed frames before sending and receiving potenally increasing the overall throughput.

TRENDnet User’s GuideTEW-823DRU24© Copyright 2014 TRENDnet. All Rights Reserved.5 Next to Mulcast-to-Unicast Converter, select the opon to enable or disable.6 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.Advanced Router SengsCongure Manually the Internet ConneconAdvanced > Setup > WANSengs1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > WAN Sengs.3 In WAN Connecon Type secon, click the drop-down list and select the type of Internet connecon.4 Enter the necessary network parameters.5 Click Apply to save the changes. ÍNote: If you are not sure which Internet connecon type you are using, please contact your local Internet Service Provider (ISP).

TRENDnet User’s GuideTEW-823DRU25© Copyright 2014 TRENDnet. All Rights Reserved.Clone a MAC addressAdvanced > Setup > WANSengsOn any home network, each network device has a unique MAC (Media Access Control) address. Some ISPs register the MAC address of the device (usually a router or a computer) connected directly to the modem. If your computer MAC address is already registered with your ISP and to prevent the re-provisioning and registraon process of a new MAC address with your ISP, then you can clone the address (assign the registered MAC address of your previous device to your new router). If you want to use the MAC address from the previous device (computer or old router that directly connected to the modem, you should rst determine the MAC address of the device or computer and manually enter it into your router using the clone MAC address feature. ÍNote: For many ISPs that provide dynamic IP address automacally, typically, the stored MAC address in the modem is reset each me you restart the modem. To clear your modem stored MAC address, typically the procedure is to disconnect power from the modem for approximately for one minute, then reconnect the power. For more details on this procedure, refer to your modem’s User Guide/Manual or contact your ISP.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > WAN Sengs.3 In MAX Address Clone secon, click Copy Your PC’s MAC Address to copy your computer’s MAC address in the MAC Address eld.4 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.Change the IP AddressAdvanced > Setup > LANSengsUsually, you do not need to change your router IP address sengs. Typically, the router IP address sengs only need to be changed, if you plan to use another router in your network with the same IP address sengs, if you are connecng your router to an exisng network that is already using the IP address sengs your router is using, or if you are experiencing problems establishing VPN connecons to your oce network through your router. ÍNote: It is recommended to keep your router IP address sengs as default. ͳDefault Router IP Address: 192.168.10.1 ͳDefault Router Network Address: 192.168.10.0 / 255.255.255.01 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > LAN Sengs.3 In LAN Interface Sengs secon, modify the following sengs: ͫIP Address: Enter the new router IP address. For example, 192.168.200.1. ͫSubnet Mask: Enter the new router subnet mask. For example, 255.255.255.0. ÍNote: The DHCP address range will change automacally to your new router IP address sengs, so you do not have to change the DHCP address range manually to match your new router IP address sengs.4 Click Apply to save the changes. ÍNote: ͳTo discard the changes, click Cancel. ͳYou will need to access your router management page using your new router IP address. For example, instead of using the default hp://192.168.10.0 your new router IP address will use the format hp://(new.ipaddress.here) to access the router management page. You can also connue using the default login URL hp://tew-823DRU.

TRENDnet User’s GuideTEW-823DRU26© Copyright 2014 TRENDnet. All Rights Reserved.Congure the DHCP ServerAdvanced > Setup > LANSengsYour router can be used as a DHCP (Dynamic Host Conguraon Protocol) server to automacally assign an IP address to each computer or device on your network. The DHCP server is enabled by default on your router. If you already have a DHCP server on your network, or if you do not want to use your router as a DHCP server, you can disable this seng. It is recommended to leave this seng enabled.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > LAN Sengs.3 In DHCP Server Sengs secon, review and modify the following sengs: ͫDHCP Server: Enable or disable the DHCP server. ͫDHCP Start IP: Change the starng address for the DHCP server range. For example, 192.168.10.20. ͫDHCP End IP: Change the ending address for the DHCP server range. For example, 192.168.10.30. ͫDHCP Lease Time: Enter the DHCP lease me in minutes. ÍNote: The DHCP lease me is the amount of me a computer or device can keep an IP address or assigned by the DHCP server. When the lease me expires, the computer or device will renew the IP address lease with the DHCP server, otherwise if there is no aempt to renew the lease, the DHCP server will reallocate the IP address to be assigned to another computer or device.4 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.Congure DHCP ReservaonAdvanced > Setup > LANSengsDHCP (Dynamic Host Conguraon Protocol) reservaon (also called Stac DHCP) allows your router to assign a xed IP address from the DHCP server IP address range to a specic device on your network. Assigning a xed IP address can allow you to easily keep track of the IP addresses used on your network by your computers or devices for future reference or conguraon such as virtual server (also called port forwarding, refer to “Virtual Server” on page 33) or special applicaons (also called port triggering, refer to “Special Applicaons” on page 34).1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > LAN Sengs.3 In Add DHCP Reservaon secon, do the following: ͫEnable: Enable or Disable the DHCP reservaon. ͫComputer Name: Enter a name of the device you will assign the DHCP reservaon. ÍNote: Next to the Computer Name eld, you can click the Host Name drop-down list to select an available computer from the DHCP server lisng. Click on the available computer to copy the computer’s name/IP address, and MAC address informaon into the respecve elds. ͫIP Address: Enter the IP address to assign to the reservaon. For example, 192.168.10.101. ͫMAC Address: Enter the MAC (Media Access Control) address of the computer or network device to assign to the reservaon. For example, 00:11:22:AA:BB:CC. ͫCopy your PC’s MAC: To copy your current computer’s MAC address to the eld, click Copy.4 Click Add to save the reservaon. ÍNote: To discard the changes, click Clear.

TRENDnet User’s GuideTEW-823DRU27© Copyright 2014 TRENDnet. All Rights Reserved.You will see the new reservaon added to the DHCP Reservaons Ready Group secon. This is a temporary list unl you save changes by clicking Apply. You can connue to add more DHCP reservaon entries which will appear in this list. Once you have saved the sengs, the entries will appear under the DHCP Reservaons list. You can click Reset to clear the entries in the list or check the Delete opon, next to the entry to remove and click Delete.5 In DHCP Reservaon List secon, do any of the following: ͫ To edit the reservaon, click . ͫ To delete the single reservaon, check the Delete checkbox. ͫ To delete all the reservaons, click Delete All. ÍNote: To discard the changes, click Clear.Add Stac RoutesAdvanced > Setup > RoungYou may want set up your router to route computers or devices on your network to other local networks through other routers. Generally, dierent networks can be determined by the IP addressing assigned to those networks. Generally speaking and for the case of an example, your network may have 192.168.10.x IP addressing and another network may have 192.168.20.x IP addressing and because the IP addressing of these two networks are dierent, they are separate networks. In order to communicate between the two separate networks, stac roung needs to be congured. ÍNote: Conguring this feature assumes that you have some general networking knowledge.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > Roung.3 In Add Stac Route secon, modify the following sengs: ͫDesnaon IP Address: Enter the IP network address of the desnaon network for the route. For example, 192.168.20.0. ͫDesnaon IP Netmask: Enter the subnet mask of the desnaon network for the route. For example, 255.255.255.0. ͫGateway: Enter the gateway to the desnaon network for the route. For example, 192.168.10.2. ͫMetric: Enter the metric or priority of the route. The metric range is 1-15, the lowest number 1 being the highest priority. For example, 1. ͫInterface: Select the interface to assign the route.

TRENDnet User’s GuideTEW-823DRU28© Copyright 2014 TRENDnet. All Rights Reserved.4 Click Add to add the stac route. The stac route informaon appears on the Stac Route List secon. ÍNote: To discard the changes, click Cancel.Delete a RouteTo delete a route, check the box in the No. column to select which routes to delete, then click Delete.Enable Dynamic RoungAdvanced > Setup > RoungYou may want set up your router to route computers or devices on your network to other local networks through other routers. Generally, dierent networks can be determined by the IP addressing assigned to those networks. Generally speaking and for the case of an example, your network may have 192.168.10.x IP addressing and another network may have 192.168.20.x IP addressing and because the IP addressing of these two networks are dierent, they are separate networks. In order to communicate between the two separate networks, stac roung needs to be congured. If you have other roung devices that support dynamic roung protocol, you can enable these roung protocols on your router to learn and automacally generate the routes needed between these networks. ÍNote: Conguring this feature assumes that you have some general networking knowledge.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > Roung.3 In RIP secon, do the following: ͫEnable RIP: Click the drop-down list to enable or disable RIP dynamic roung protocol. ͫRIP mode: Depending on which RIP version dynamic roung protocols your other roung devices support, click the appropriate version v1 or v2. ÍNote: If selecng RIP v2, this requires basic password authencaon between roung devices using this protocol. The password must match on all roung devices connected in order successfully exchange roung informaon.4 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.  The current roung table is visible in Roung Table secon.

TRENDnet User’s GuideTEW-823DRU30© Copyright 2014 TRENDnet. All Rights Reserved.Congure IPv6 SengsAdvanced > Setup > IPv6SengsIPv6 (Internet Protocol Version 6) is a new protocol that signicantly increases the number of available Internet public IP addresses due to the 128-bit IP address structure versus IPv4 32-bit address structure. In addion, there are several integrated enhancements compared to the most commonly used and well known IPv4 (Internet Protocol Version 4) such as:• Integrated IPsec: Beer Security.• Integrated Quality of Service (QoS): Lower latency for real-me applicaons.• Higher Eciency of Roung: Less transmission overhead and smaller roung tables.• Easier conguraon of addressing. ÍNote: In order to use IPv6 Internet connecon sengs, it is required that your ISP provide you with the IPv6 service. Please contact your ISP for available and more informaon on the IPv6 service.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > IPv6 Sengs.3 Review the IPv6 Internet Connecon sengs and enter informaon sengs specied by your ISP. ÍNote: Please contact your ISP for IPv6 service availability.  Select the IPv6 connecon type provided by your ISP. 4 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.Create SchedulesAdvanced > Setup > ScheduleFor addional security control, your router allows you to create schedules to specify a me period when a feature on your router should be acvated and deacvated. Before you use the scheduling feature on your router, ensure that your router system me is congured correctly. ÍNote: You can apply a predened schedule to the following features: ͳ Wireless (2.4GHz and 5GHz) ͳGuest Network ͳ Parental Control (MAC/IP Filters) ͳ Access Control (IP Protocol Filters) ͳVirtual Server ͳ Special Applicaons ͳGaming1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > Schedule.3 In Add Schedule Rule secon, modify the following values: ͫRule Name: Enter a name for the schedule you would like to apply. ͫDay(s): Check Select Day(s) to select the specic days or select All Week to set the schedule for all days. ÍNote: Check the checkbox next to the day(s) when you want to run the schedule. ͫAll Day – 24 Hours: Check the opon to set the schedule to 24 hours. ͫStart/End Time: Select the start and end me you would like the schedule to follow.4 Click Apply to save the changes. ÍNote: To discard the changes, click Clear.

TRENDnet User’s GuideTEW-823DRU31© Copyright 2014 TRENDnet. All Rights Reserved.Congure Access Control RulesAdvanced > Security > Access ControlYou may want to block computers or devices on your network access to specic ports (used or required by a specic applicaon) to the Internet.Block a specic service or mulple services1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Security > Access Control.3 In Access Control secon, click the Enable opon.4 In Add Services Block Rule secon, modify the following values: ͫPolicy Enable: Checking this opon turns on the Protocol/IP Filter and unchecking turns it o. ͫPolicy Name: Enter a name for the Protocol/IP Filter. ͫSchedule (Oponal): Select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule. ͫClient IP Address Range: Enter the IP address or IP address range to apply the protocol/IP lter. For example, 192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30. ÍNote: The lter will not be applied to IP addresses outside of the range specied.  To simplify conguraon, there is a list of commonly used pre-dened Protocol/IP Filters to modify otherwise, you can choose to manually add a new Protocol/IP Filter. ͫRule Dene: Select Special Service to select from the predened services listed or select User Dene to specically enter the TCP or UDP port number or port range numbers to block. For example, 80-80 or 20-21.5 Click Add to save the rule. ÍNote: To discard the changes, click Cancel.

TRENDnet User’s GuideTEW-823DRU32© Copyright 2014 TRENDnet. All Rights Reserved. ÍNote: In the Services Block Rule List secon, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.Block All Services1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Security > Access Control.3 In Access Control secon, click the Enable opon.4 In Add Services Block Rule secon, modify the following values: ͫRule Enable: Checking this opon turns on the Protocol/IP Filter and unchecking turns it o. ͫRule Name: Enter a name for the Protocol/IP Filter. ͫIP Address: Enter the IP address or IP address range to apply the protocol/IP lter. For example, 192.168.10.1, 192.168.10.0/24 or 192.168.10.1-192.168.10.30. ÍNote: The lter will not be applied to IP addresses outside of the range specied. ͫSchedule (Oponal): Select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule.5 Click Add to save the rule. ÍNote: To discard the changes, click Reset. ÍNote: In the All Services Block Rule List secon, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.Congure Inbound Filter RulesAdvanced > Security > Inbound FilterInbound Filters allows you to allow or deny a specic range of IP addresses. You can create a predened range of IP addresses to apply to a specic feature. ÍNote: You can apply a predened inbound lter to the following features: ͳVirtual Server ͳGaming ͳRemote Management1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Security > Inbound Filter.3 In Add Inbound Filter Rule, modify the following values: ͫFilter Name: Enter a name for the IP address range. ͫRule Acon: Select Allow to allow the specied IP address range or Deny to deny the specied IP address range. ͫIP Address: Enter the IP address. For example, 192.168.1.20-192.168.1.30.4 Click Add to save the Inbound Filter. ÍNote: To discard the changes, click Clear. ÍNote: In the Inbound Filter List, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.

TRENDnet User’s GuideTEW-823DRU33© Copyright 2014 TRENDnet. All Rights Reserved.Congure Firewall SengsThis router can provide access to devices on your local area network to the Internet using the Virtual Server, Special Applicaon, method (DMZ NOT recommended).DMZAdvanced > Firewall > DMZYou may want to expose a specic computer or device on your network to the Internet to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature that makes all the ports and services available on the WAN/Internet side of the router and forwards them to a single IP address (computer or network device) on your network. The DMZ feature is an easy way of allowing access from the Internet however, it is a very insecure technology and will open local area network to greater threats from Internet aacks.It is strongly recommended to use Virtual Server (also called port forwarding, refer to “Virtual Server” on page 33) to allow access to your computers or network devices from the Internet.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Firewall > DMZ.3 In DMZ Sengs secon, select Enable from the DMZ Sengs drop-down list.4 Enter the IP address you assigned to the computer or network device to expose to the Internet.5 Click Apply to save the changes. ÍNote: To discard the changes, click Reset.Virtual ServerAdvanced > Firewall > Virtual ServerVirtual Server (also called port forwarding) allows you to dene specic ports (used or required by a specic applicaon) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (refer to “DMZ” on page 33) in which DMZ forwards all ports instead of only specic ports used by an applicaon. An example would be forwarding a port to an IP camera (TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on your network to be able to view it over the Internet. To open several ports please refer to “Gaming” on page 35.Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service (outlined in “Idenfy Your Network on the Internet” on page 29).1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Firewall > Virtual Server.3 In Add Virtual Server secon, modify the following sengs: ͫRule Enable: Check the opon to enable the virtual server. ͫRule Name: Enter a name for the virtual server. ͫIP Address: Enter the IP address of the device to forward the port. For example, 192.168.10.101. ͫProtocol: Select the protocol required for your device. TCP, UDP, or Both (TCP and UDP). ͫPublic Port: Enter the port number used to access the device from the Internet. ͫPrivate Port: Enter the port number required by your device. Refer to the connecng device’s documentaon for reference to the network port(s) required. ÍNote: The Public Port can be assigned a dierent port number than the Private Port (also known as port redirecon), however it is recommended to use the same port number for both sengs. Please refer to the device documentaon to determine which ports and protocols are required. It is recommended to assign a stac IP address to the device or use DHCP reservaon to ensure the IP address of the device does not change. ͫInbound Filter: Select the dened IP address range to allow access. ͫSchedule: Click New Schedule to select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule.

TRENDnet User’s GuideTEW-823DRU34© Copyright 2014 TRENDnet. All Rights Reserved. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule. ÍNote: In the Virtual Server List secon, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.Example: To forward the TCP port 80 to your IP camera, you need to do the following:1 Setup DynDNS service. Refer to “Idenfy Your Network on the Internet” on page 29.2 Access TRENDnet IP Camera management page and forward Port 80 (refer to the product documentaon).3 Make sure to congure your network/IP camera to use a stac IP address. ÍNote: You may need to reference your camera documentaon on conguring a stac IP address.4 Log into your router management page (refer to “Log in to Management Page” on page 8).5 Click on Advanced > Firewall > Virtual Server.6 Check the Rule Enable opon to enable the Virtual Server.7 Enter the IP address of the camera. For example, 192.168.10.101.8 Next to Protocol, make sure TCP is selected from the drop-down list.9 The Private Port and Public Port, enter the port number 80 for both.10 Click Add to save the sengs.Special ApplicaonsAdvanced > Firewall > SpecialApplicaonsApplicaon rules (also called port triggering) is typically used for online gaming applicaons or communicaon applicaons that require a range of ports or several ports to be dynamically opened on request to a device on your network. The router will wait for a request on a specic port or range of ports (or trigger port/port range) from a device on your network and once a request is detected by your router, the router will forward a single port or mulple ports (or incoming port/port range) to the device on your network. This feature is not typically used as most devices and routers currently use UPnP (Universal Plug and Play) to automacally congure your router to allow access for applicaons. Refer to “Enable/Disable UPnP” on page 29.IMPORTANT: Please refer to the device documentaon to determine if your device supports UPnP rst, before conguring this feature.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Firewall > Special Applicaons.3 In Port Trigger Funcon secon, click the Port Triggering drop-down menu and choose Enable.4 Click Apply to save the changes.5 In Add Port Trigger Rule secon, review and modify the following sengs: ͫRule Enable: Check the opon to enable the port trigger rule. ͫRule Name: Enter a name for the port trigger rule. ͫMatch Protocol: Select the protocol for the rewall ports required for your device. The available opons are TCP, UDP, or Any (TCP and UDP). ͫMatch Port: Enter the ports or port range to be forwarded to the device. For example, 2000-2038,2200-2210. ͫTrigger Protocol (Trigger): Select the trigger port protocol requested by the device. The available opons are TCP, UDP, or Any. ͫTrigger Port: Enter the port requested by the device. For example, 554-554 or 6112-6112).

TRENDnet User’s GuideTEW-823DRU35© Copyright 2014 TRENDnet. All Rights Reserved. ͫSchedule: Click New Schedule to select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule.6 Click Add to save the sengs. ÍNote: In the Rule List secon, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.GamingAdvanced > Firewall > GamingGaming allows you to dene mulple ports (used or required by a specic applicaon or game) and forward them to a single IP address (a computer or device) on your network. Using this feature is more secure compared to using DMZ (refer to “DMZ” on page 33) in which DMZ forwards all ports instead of only specic ports used by an applicaon. Since most ISPs constantly change your home IP address, to be able to access the Virtual Server port(s) from the Internet it is recommended to setup Dynamic DNS service (refer to “Idenfy Your Network on the Internet” on page 29).1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Firewall > Gaming.3 In Add Gaming Rule secon, modify the following values: ͫRule Enable: Check the opon to enable the gaming rule. ͫRule Name: Enter a name for the gaming rule. ͫIP Address: Enter the IP address of the device to forward the ports. For example, 192.168.10.101. ͫTCP Ports to Open: Enter the TCP port you would like to set. ͫUDP Ports to Open: Enter the UDP port you would like to set. ÍNote: Please refer to the device documentaon to determine which ports and protocols are required. You should assign a stac IP address to the device or use DHCP reservaon to ensure the IP address of the device does not change. ͫInbound Filter: Select the dened IP address range to allow access. ͫSchedule: Click New Schedule to select the pre-dened schedule to apply. The lter will only be acve during the me period dened in the pre-dened schedule. ÍNote: Before applying scheduling, please ensure your Time sengs are congured correctly and you have dened a schedule. Refer to “Set the Date and Time” on page 42 and “Create Schedules” on page 30 to create a schedule.

TRENDnet User’s GuideTEW-823DRU36© Copyright 2014 TRENDnet. All Rights Reserved.4 Click Add to save the sengs. ÍNote: In the Gaming Rule List secon, you can edit a rule by clicking in the Edit column next to the rule you would like to edit. To delete the rule, click in the Delete column next to the rule you would like to delete.ALGAdvanced > Firewall > ALGYou may want to congure your router to allow computers the use of specic high layer applicaons or service sessions to pass through. Applicaon Layer Gateways (ALG) allows you to easily enable or disable these applicaons to pass through your router. ÍNote: It is recommended to leave these sengs enabled.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Firewall > ALG.3 In Applicaon Level Gateway (ALG) Conguraon secon, modify the following values: ͫStreaming Media: Check this opon to allow RTSP protocol through your router typically used in streaming media applicaons. ͫStreaming Media-VoIP: Check this opon to allow SIP protocol through your router typically used in VoIP applicaons. ͫStreaming Media-VoIP: Check this opon to allow H.323 protocol through your router typically used in video/audio conferencing applicaons. ͫFile Transfer: Check this opon to allow FTP protocol through your router used for le transfer over a network or the Internet. ͫFile Transfer: Check this opon to allow TFTP protocol through your router used for le transfer over a network or the Internet. ͫVPN Pass-Through: Check this opon to allow client connecons through your router.4 Click Save Status to save the sengs. ÍNote: To discard the changes, click Cancel.

TRENDnet User’s GuideTEW-823DRU37© Copyright 2014 TRENDnet. All Rights Reserved.Enable Remote AccessAdvanced > Setup > ManagementYou may want to make changes to your router from a remote locaon such at your oce or another locaon while away from your home.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Setup > Management.3 In Remote Management secon, modify the following values: ͫRemote Control (via Internet): Click the drop-down list and select Enable to enable remote management or Disable to disable remote management. ͫRemote Port: Enter the port to assign remote access to the router. It is recommended to leave this seng as 8080. ÍNote: If you have congured port 8080 for another conguraon secon, such as virtual server or special applicaon, please change the port to use. Recommended port range is 1024 to 65534.4 Click Apply to save the changes. ÍNote: To discard the changes, click Reset.Allow/Deny Ping Requests from the InternetAdvanced > Administrator > Advanced NetworkTo provide addional security, you may want to disable your router from responding to ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is network communicaon test to check if a device with IP address is alive or exists on the network. By disabling this feature, you can conceal your router’s IP address and existence on the Internet by denying responses to ping requests from the Internet. You can addionally use this feature as a tool for troubleshoong purposes.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Administrator > Advanced Network 3 In WAN Ping secon, click the WAN Ping Respond drop-down list and select the desired sengs. ͫEnable to allow your router to respond to ping requests from the Internet. ͫDisable to block WAN ping requests from the Internet.4 Click Apply to save the changes. ÍNote: To discard the changes, click Reset.

TRENDnet User’s GuideTEW-823DRU38© Copyright 2014 TRENDnet. All Rights Reserved.Congure Quality of Service SengsAdvanced > Setup > QoSQoS involves priorizaon of network trac. QoS can be targeted at a network interface, toward a given server or router’s performance, or in terms of specic applicaons.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > Setup > QoS.3 In QoS Seng secon, modify the following sengs: ͫEnable QoS: Click Enabled to allow the Quality of service through the router. You can also click Disable to disable the Quality of service through the router. ͫPriorize ACK: Click Enabled to priorize the acknowledgment packets. ͫPriorize ICMP: Click Enabled to priorize the ICMP requests. You can also click Disabled if you do not want to priorize the ICMP requests. ÍNote: The ICMP requests are basically ping requests. It is recommended to disable it unless you wish to run a game server where it is important to maintain low level of ping for players to determine the latency.4 In Trac Class Seng secon, click the Default Trac Class drop-down list and select the trac class you would like to congure for the QoS rule.5 In Inbound Class Seng secon, modify the following sengs: ͫBW Max Inbound: Enter the maximum download speed of your ISP (Internet Service Provider). ͫHighest/High/Medium/Low/Lowest: Enter the download speeds you would like to apply on each state of download speeds. This seng is similar to seng the priority speeds of each class.

TRENDnet User’s GuideTEW-823DRU39© Copyright 2014 TRENDnet. All Rights Reserved.6 In Outbound Class Seng secon, modify the following sengs: ÍNote: The elds will automacally populate when Inbound Class is congured but you can also modify the sengs manually. ͫBW Max Outbound: Enter the maximum upload speed of your ISP (Internet Service Provider). ͫHighest/High/Medium/Low/Lowest: Enter the upload speeds you would like to apply on each state of download speeds. This seng is similar to seng the priority speeds of each class.7 Click Apply to save the changes. ÍNote: To discard the changes, click Cancel.8 In QoS Rule Add secon, modify the following values: ͫRule Enable: Check this opon to enable the QoS rule. ͫIP/MAC Address Filter: Click on the drop-down menu and choose the type of the IP address or MAC address. Then enter the IP address and/or MAC address to the Address eld(s). ͫProtocol Filter: Select the protocol you would like to apply on the QoS rule. ͫPort Filter: Select the port from the drop-down menu you would like to assign on the QoS rule. Then enter the port number to the Port List eld. ͫClass Assigned: Select the class that you have assigned to the QoS rule. ͫDescripon: Enter the QoS descripon that best describes the rule.9 Click Add to save the sengs. ÍNote: To discard the changes, click Clear.

TRENDnet User’s GuideTEW-823DRU40© Copyright 2014 TRENDnet. All Rights Reserved.Using External USB StorageYour router’s USB port can be used to share les through the network when a USB storage device is connected on the back USB port. The router supports both FTP and SAMBA (SMB) ling sharing protocols. ÍNote: ͳFor security purposes, the USB SMB and FTP sengs on your router are disabled by default. You will need to enable these sengs in order to allow access to your USB storage devices. ͳFor security purposes, the default USB SMB and FTP admin password is congured to the same predened password used to log into your router management page.Congure File Sharing ServerAdvanced > USB > FileSharingServer1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > USB > File Sharing Server.3 In Server Informaon secon, modify the following values: ͫSamba (SMB) Server: Select enable or disable for the feature. ͫServer Name: You can change the name of your server which will be the name you will when accessing your USB storage device. ÍNote: You can also access the USB storage using the router IP address. ͫWorkgroup: Enter the workgroup name. It is recommended to keep the standard default “WORKGROUP”. If you change this seng, you will need to change the workgroup name on all computers in your network that are allowed access to the USB storage. ͫDescripon (oponal): Enter a descripon of the server.4 In Set Administrator secon, review the administrator sengs required for your File Sharing (SMB) Server. Administrator will have read and write access to the les. To dene user accounts, connue in the respecve secon. ͫAdministrator: Modify the Administrator account user name. ͫNew Password/Re-type Password: Enter the new password for the Administrator. Re-type the password to conrm.5 Click Apply to save the changes. ÍNote: To discard the changes, click Clear.6 In User Account List secon, you can add users to your File Sharing (SMB) Server. ͫUser Name: Enter the user name to be used to access your les. ͫPassword: Enter the password for the user name. ͫPermission: Select the permission you will grant to the user. You can allow the user Read Only or Read-Write access to the USB storage.7 Click Add to add the account. ÍNote: ͳTo discard the changes, click Clear. ͳUse Current User Account List to review all the user accounts. Click Delete to delete the selected user account.

$TRENDnet User’s GuideTEW-823DRU41© Copyright 2014 TRENDnet. All Rights Reserved. ÍNote: ͳIn Windows® operang system, you can access the USB storage device on your computer in the following path: Computer > Network > USBSHARE > usb_A1. ͳYour computer will only be able to automacally discover the USB storage if you are set to a workgroup under the default name “WORKGROUP”. Your computer will not be able to automacally discover the USB storage if it is connected to a domain or congured with a dierent workgroup name. ͳIn Windows® operang system, if your computer cannot discover the USB storage automacally, you can access the les in your server, using the network map or by typing \\<routerIPaddress>\usb_A1 on your browser’s or le explorer address bar. For example, .Congure FTP ServerAdvanced > USB > FTP ServerFTP (File Transfer Protocol) is used to access shared les through the Internet. In order to share les, you will need to plug in a USB storage device on the USB port on the back of the router.1 Log into your router management page (refer to “Log in to Management Page” on page 8).2 Click on Advanced > USB > FTP Server. 3 In Server Informaon secon, modify the following values: ͫFTP Server: Select enable or disable for the feature. ͫAuthencaon: Select Enable to acvate user name and password authencaon in order to access the USB storage using FTP. Select Disable to let user to anonymously access the USB storage using FTP. ͫAccess From Internet: Select Enable to allow access to the USB storage using FTP over the Internet (WAN) and local (LAN) networks. Select Disable to disable FTP access over the Internet and allow LAN access only.4 In File Server Codepage secon, you can dene which character set to use when transferring data using FTP. ÍNote: It is recommended to leave these sengs as default “Western European”.5 Click Apply to save the changes.6 In User Account List secon, you can add users to your FTP Server. ͫUser Name: Enter the user name to be used to access your les. ͫPassword: Enter the password for the user name. ͫPermission: Select the permission you will grant to the user. You can allow the user Read Only or Read-Write access to the USB storage.7 Click Add to add the account. ÍNote: ͳTo discard the changes, click Clear. ͳUse Current User Account List to review all the user accounts. Click Delete to delete the selected user account. ÍNote: Signing up for a Dynamic DNS service (outlined in “Idenfy Your Network on the Internet” on page 29) will provide idencaon of the router’s network from the Internet. You can access your shared les over the Internet by typing, for example p://<router’sWANIPaddress> or p://myDDNSservice in your web browser or le explorer address bar. You can access your share les locally by typing p://<router’sLANIPaddress> in your web browser or le explorer address bar.$

TRENDNET TEW823824 AC1750 Dual Band Wireless Router, AC1750 Dual Band Wireless Router with StreamBoostTM Technology User Manual

TRENDNET, Inc. AC1750 Dual Band Wireless Router, AC1750 Dual Band Wireless Router with StreamBoostTM Technology

User Manual.pdf

Navigation menu

Namespaces

Views

Navigation