User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1613171 |
| Application ID | jWUj0JLDwV5dQxdPviJSTg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 21.57kB (269605 bits) |
| Date Submitted | 2012-01-03 00:00:00 |
| Date Available | 2012-01-03 00:00:00 |
| Creation Date | 0000-00-00 00:00:00 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2012-01-02 10:23:41 |
| Document Title | Microsoft Word - WUS-N10M external specification v1.0_0622-2010_.doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | 07479 |
User manual For WLAN Card 802.11b/g/n USB Adapter (Ralink RT3070) Model Number: WUS-N10M Revision: 1.0 Alpha Networks Proprietary and Confidential Information Revision History Rev. Date Author Reason for Changes 1.0 Jun. 22,2010 Dephany Liu ⢠New released Alpha Networks Proprietary and Confidential Information Contents 2SHUDWLRQ0DQXDO 1.0 SCOPE............................................................................................................................................................................... 1.1 DOCUMENT...................................................................................................................................................................... 1.2 PRODUCT FEATURES........................................................................................................................................................ 2.0 REQUIREMENTS ........................................................................................................................................................... 2.1 FUNCTIONAL BLOCK DIAGRAM ....................................................................................................................................... 2.2 GENERAL REQUIREMENTS ............................................................................................................................................... 2.2.1 IEEE 802.11b Section.............................................................................................................................................. 2.2.2 IEEE 802.11g Section.............................................................................................................................................. 2.2.3 IEEE 802.11n Section.............................................................................................................................................. 2.2.4 General Section ....................................................................................................................................................... 2.3 SOFTWARE REQUIREMENTS ............................................................................................................................................. 2.3.1 Information .............................................................................................................................................................. 2.3.2 Configuration .......................................................................................................................................................... 2.3.3 Encryption ............................................................................................................................................................... 2.4 MECHANICAL REQUIREMENTS ......................................................................................................................................... 2.5 COMPATIBILITY REQUIREMENTS...................................................................................................................................... 2.6 REQUIREMENTS OF RELIABILITY, MAINTAINABILITY AND QUALITY ................................................................................ 2.7 ENVIRONMENTAL REQUIREMENTS................................................................................................................................... Alpha Networks Proprietary and Confidential Information 2SHUDWLRQ0DQXDO $OSKD1HWZRUNV3URSULHWDU\DQG&RQILGHQWLDO,QIRUPDWLRQ 7;VLJQDOFRPPDQG 6HOHFW7;5;VLWH 6HOHFWFKDQQHOGDWDUDWHDQG&KDLQ )RUFRQWLQXH7;VHOHFWFRQWLSUHVVVWDUWW[ )RUFRQWLQXHSDFNHWVW[VHWUHSHDWWRSUHVVVWDUWW[ $OSKD1HWZRUNV3URSULHWDU\DQG&RQILGHQWLDO,QIRUPDWLRQ 5;VLJQDOFRPPDQG 6HOHFW7;5;VLWH 6HOHFWFKDQQHOGDWDUDWHDQG&KDLQ $OSKD1HWZRUNV3URSULHWDU\DQG&RQILGHQWLDO,QIRUPDWLRQ 1.0 Scope WLAN Card 1.1 Document Thisdocument document is to specify the product b/g/nCard USB. Dongle. Card on is based Ralink chipset This is to specify the productrequirements requirementsfor for802.11 WLAN This CardThis is based Ralinkon chipset that complied 802.11g,IEEE IEEE 802.11b, IEEE 802.11n standard from 2.4~2.5GHz, it be canused be used to provide that complied with withIEEE IEEE 802.11g, 802.11b, IEEE 802.11n standard from 2.4~2.5GHz, and and it can to provide up to to 54Mbps for 802.11g, 802.11g, 11Mbps 11Mbps for for802.11b 802.11band and 150Mbps 150Mbps for for802.11n 802.11nto toconnect connect your your wireless wireless LAN. LAN. up 54Mbps for With seamless roaming, fully interoperability and advanced security with WEP standard, WLAN Card offers With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11b/g/n USB Dongle offers absolute interoperabilitywith withdifferent differentvendorsâ vendorsâ802.11g, 802.11g,802.11b 802.11band and802.11n 802.11nAccess AccessPoints Pointsthrough throughthe thewireless wirelessLAN. LAN. absolute interoperability 1.2 Product Features Compatible with IEEE 802.11n draft 2.0 standard to provide wireless 150Mbps data rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps data rate Compatible with IEEE 802.11b standard to provide wireless 11Mbps data rate Operation at 2.4 ~ 2.5GHz frequency band to meet worldwide regulations Dynamic date rate scaling at 6, 9, 12, 18, 24, 36, 48, 54 for IEEE 802.11g. Dynamic date rate scaling at 1, 2, 5.5, and 11Mbps for IEEE 802.11b Maximum reliability, throughput and connectivity with automatic data rate switching Support wireless data encryption with 64/128-bit WEP for security Support infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication Support WEP, 802.1x, WPA and WPA2 enhanced security Friendly user configuration and utilities Drivers support Windows 2K, XP 32/64-bit, Vista 32/ 64-bit Support external WPS button to connect Access Point easily High speed USB 2.0 interface RoHS compliant Alpha Networks Proprietary and Confidential Information Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions: 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: âContains FCC ID: XU8WUSN10Mâ. RRKWUSN10Mâ. The The grantee's grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the userâs manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme Ă la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prĂŠjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indĂŠsirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. DĂŠclaration d'exposition aux radiations: Cet ĂŠquipement est conforme aux limites d'exposition aux rayonnements IC ĂŠtablies pour un environnement non contrĂ´lĂŠ. Cet ĂŠquipement doit ĂŞtre installĂŠ et utilisĂŠ avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use)㊡ 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conçu uniquement pour les intĂŠgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit ĂŞtre installĂŠe de telle sorte qu'une distance de 20 cm est respectĂŠe entre l'antenne et les utilisateurs, et 2) Le module ĂŠmetteur peut ne pas ĂŞtre coĂŻmplantĂŠ avec un autre ĂŠmetteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplĂŠmentaires sur l'ĂŠmetteur ne seront pas nĂŠcessaires. Toutefois, l'intĂŠgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformitĂŠ supplĂŠmentaires requis pour ce module installĂŠ. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:㊡ Dans le cas oĂš ces conditions ne peuvent ĂŞtre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre ĂŠmetteur), l'autorisation du Canada n'est plus considĂŠrĂŠ comme valide et l'ID IC ne peut pas ĂŞtre utilisĂŠ sur le produit final. Dans ces circonstances, l'intĂŠgrateur OEM sera chargĂŠ de rĂŠĂŠvaluer le produit final (y compris l'ĂŠmetteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: âContains IC: 4833A-WUSN10Mâ. Plaque signalĂŠtique du produit final Ce module ĂŠmetteur est autorisĂŠ uniquement pour une utilisation dans un dispositif oĂš l'antenne peut ĂŞtre installĂŠe de telle sorte qu'une distance de 20cm peut ĂŞtre maintenue entre l'antenne et les utilisateurs. Le produit final doit ĂŞtre ĂŠtiquetĂŠ dans un endroit visible avec l'inscription suivante: "Contient des IC: 4833A-WUSN10M ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the userâs manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information Ă l'utilisateur final L'intĂŠgrateur OEM doit ĂŞtre conscient de ne pas fournir des informations Ă l'utilisateur final quant Ă la façon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rĂŠglementaires requises et avertissements comme indiquÍź dans ce manuel. 2.0 Requirements The WLANDraft Card . USB Dongle. Thefollowing followingsections sectionsidentify identifythe thedetailed detailedrequirements requirements of the the 802.11n 2.0 2.1 Functional Block Diagram 2.2 General Requirements 2.2.1 IEEE 802.11b Section Feature Detailed Description 2.2.1.1 2.2.1.2 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers IEEE 802.11b DQPSK, DBPSK, DSSS, and CCK 2400 ISM band band 2400 ~~ 2483.5MHz 2497MHz ISM Data Rate Media Access Protocol Transmitter Output Power 11 channels for United States 13 channels for Europe Countries and other regions 11, 5.5, 2, and 1Mbps CSMA/CA with ACK 2.2.1.3 2.2.1.4 2.2.1.5 2.2.1.6 2.2.1.7 2:eCn! Typical RF Output Power (tolerance +-2 dB) at each RF chain, Data Rate and at room Temp. 25degree C 17 dBm at 1,2,5.5,11Mbps Note: The maximum power setting will vary according to individual country regulations. 2.2.1.8 Receiver Sensitivity Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Error Rate = 8% â94dBm at 1Mbps â92dBm at 2Mbps â90dBm at 5.5Mbps Alpha Networks Proprietary and Confidential Information # Feature Detailed Description â88dBm for 11Mbps 2.2.2 IEEE 802.11g Section Feature Detailed Description 2.2.2.1 2.2.2.2 Standard Radio and Modulation Schemes Operating Frequency Channel Numbers IEEE 802.11g BPSK, QPSK, 16QAM, 64QAM, and OFDM 2400 ~ 2483.5MHz ISM band Data Rate Media Access Protocol Transmitter Output Power 11 channels for United States 13 channels for Europe Countries and other regions 6,9,12,18,24,36,48,54Mbps CSMA/CA with ACK 2.2.2.3 2.2.2.4 2.2.2.5 2.2.2.6 2.2.2.7 Typical RF Output Power (tolerance +-2dB) at each RF chain, Data 33eCn! Rate and at room Temp. 25degree C 16dBm at 12 ~ 6 Mbps 15dBm at 24,36 Mbps 14dBm at 54,48 Mbps Note: The maximum power setting will vary according to individual country regulations. 2.2.2.8 Receiver Sensitivity Typical Sensitivity at each RF chain. Frame (1000-byte PDUs) Error Rate <10% â88dBm at 6Mbps â86dBm at 9Mbps â84dBm at 12Mbps â85dBm at 18Mbps â78dBm at 24Mbps â76dBm at 36Mbps â74dBm at 48Mbps â72dBm at 54Mbps 2.2.3 IEEE 802.11n Section Feature Detailed Description 2.2.3.1 2.2.3.2 Standard Radio and Modulation Type Operating Frequency Data Rate Draft 11n BPSK, QPSK, 16QAM, 64QAM with OFDM 2400 ~ 2483.5MHz ISM band 2.2.3.3 2.2.3.4 GI=800ns GI=400ns MCS 20MHz 40MHz 20MHz 40MHz 6.5 13 19.5 26 39 52 58.5 13.5 27 40.5 54 81 108 121.5 7.2 14.4 21.7 28.9 43.3 57.8 65.0 15 30 45 60 90 120 135 Alpha Networks Proprietary and Confidential Information # 2.2.3.5 2.2.3.6 2.2.3.7 Feature Detailed Description Media Access Protocol Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector 10 11 12 13 14 15 65 135 13 27 26 54 39 81 52 108 78 162 104 216 117 243 130 270 CSMA/CA with ACK 72.2 14.444 28.889 43.333 57.778 86.667 115.556 130.000 144.444 150 30 60 90 120 180 240 170 300 Typical RF Output Power (tolerance +-2dB) at each RF chain, Data 33eCn! Rate and at room Temp. 25degree C Note: The maximum power setting will vary according to individual country regulations  2.4GHz Band/HT-20 16dBm at MCS0/1 16dBm at MCS2/3 15dBm at MCS4/5 14dBm at MCS6/7  2.4GHz Band/HT-40 15dBm at MCS0/1 15dBm at MCS2/3 14dBm at MCS4/5 13dBm at MCS6/7 Typical Sensitivity at Which Frame (1000-byte PDUs) Error Rate = 10% and at room Temp. 25degree C  2.4GHz Band/HT-20 â86dBm at MCS0/8 â84dBm at MCS1/9 â82dBm at MCS2/10 â80dBm at MCS3/11 â78dBm at MCS4/12 â76dBm at MCS5/13 â74dBm at MCS6/14 â72dBm at MCS7/15  2.4GHz Band/HT-40 â87dBm at MCS0/8 â83dBm at MCS1/9 â81dBm at MCS2/10 â78dBm at MCS3/11 â76dBm at MCS4/12 â72Bm at MCS5/13 â70dBm at MCS6/14 â68dBm at MCS7/15 2.2.4 General Section Feature Detailed Description 2.2.4.1 Antenna Type External antenna Alpha Networks Proprietary and Confidential Information 2.2.4.2 2.2.4.3 2.2.4.4 Operating Voltage Current Consumption USB 5VDC +/- 10% 220mA at continuous transmit mode 160mA at receive mode w/o receiving packet High Speed USB2.0 Interface 2.3 Software Requirements The Configuration Software supports Microsoft Windows 2000, XP 32/64-bit and Vista 32/64-bit. This configuration software includes the following functions: Information Information allows you to monitor network status. Configuration Configuration allows you to configure parameters for wireless networking. Encryption Encryption provides WEP, WPA, WPA2, and 802.1X security control Diagnosis Diagnosis allows you to display all channel status and search neighboring access points 2.3.1 Information Feature Detailed Description 2.3.1.1 General Information 2.3.1.2 Current Link Information 2.3.1.3 Site survey General Information shows the name of Wireless Adapter, Adapter MAC Address, Regulatory Domain, Firmware Version, and Utility Version. Current Link Information shows the Current Setting ESSID, Channel Number, Associated BSSID, Network Type (infrastructure or Ad-hoc network), WEP Status (enable or disable), Link Status (Connect or Dis-connect), 802.11g Transmit Speed (6, 9, 12, 18, 24, 36, 48, 54Mbps), 802.11b Transmit Speed (1, 2, 5.5, 11Mbps), Signal Strength, and Link Quality. To search the neighboring access points and display the information of all access points. 2.3.2 Configuration Feature Detailed Description 2.3.2.1 ESS ID 2.3.2.2 Network Type 2.3.2.3 Transmission Speed 2.3.2.4 Roaming Input an SSID number if the roaming feature is enabled Supports for ASCII printable characters. Ad-hoc Mode and 802.11 Ad-hoc Mode for network configurations that do not have any access points Infrastructure Mode for network configurations with access points This indicates the communication rates. Select appropriate transmission speed to match your wireless LAN settings Support Automatic or Manual Rescan to associate with access point. 2.3.3 Encryption Feature Detailed Description 2.3.3.1 Encryption 2.3.3.2 WEP Management RC4 encryption algorithm Support 64/128 bit WEP encryption Support open system and shared key authentication Four WEP keys can be selected STA with WEP off will never associate any AP with WEP enabled WEP Key Format: Option for Hex format Alpha Networks Proprietary and Confidential Information
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : 3.1-701 Format : application/pdf Creator : 07479 Title : Microsoft Word - WUS-N10M external specification v1.0_0622-2010_.doc Creation Date--Text : 6/29/2010 15:36:49 Producer : Acrobat Distiller 8.1.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:01:02 10:23:41+08:00 Metadata Date : 2012:01:02 10:23:41+08:00 Create Date : 2012:01:02 10:25:36+08:00 Document ID : uuid:d0f89cd7-304e-42d0-ab3c-a831d3da0051 Instance ID : uuid:5f70f3b7-f136-422a-9964-ebce05274a5d Page Count : 15 Author : 07479EXIF Metadata provided by EXIF.tools