TTE Technology 55FS3700 LCD TV User Manual W8U55FS3700 users manual Rev 1
TTE Technology, Inc. LCD TV W8U55FS3700 users manual Rev 1
W8U55FS3700_users manual_Rev 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2487099 |
| Application ID | +CZ4xXgi3tvxehExZJH3qA== |
| Document Description | W8U55FS3700_users manual_Rev 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 179.98kB (2249759 bits) |
| Date Submitted | 2014-12-30 00:00:00 |
| Date Available | 2014-12-30 00:00:00 |
| Creation Date | 2014-04-30 15:12:16 |
| Producing Software | Adobe PDF Library 9.9 |
| Document Lastmod | 2014-12-24 09:39:09 |
| Document Title | W8U55FS3700_users manual_Rev 1 |
| Document Creator | Adobe InDesign CS5 (7.0) |
Important Information
Important Product Information
Important Safety Instructions
This symbol indicates that this product
incorporates double insulation between hazardous
main voltage and user accessible parts. When
servicing, use only identical replacement parts.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside.
Refer servicing to qualified service personnel.
This product incorporates HDMI technology.
HDMI, the HDMI logo, and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
ENERGY STAR is a set of power-saving guidelines issued by the U.S.
Environmental Protection Agency (EPA).
ENERGY STAR is a joint program of the U.S. Environmental Protection
Agency and the U.S. Department of Energy helping us all save money and
protect the environment through energy efficient products and practices.
This product qualifies for ENERGY STAR in the "factory default" setting
("Home Mode" option in the initial Setup Wizard or "Energy Star" option
for "Picture Mode" in Picture menu) and this is the setting in which power
savings will be achieved. Changing the factory default picture settings
or enabling other features may increase power consumption that could
exceed the limits necessary to qualify for ENERGY STAR rating.
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the product.
WARNING
WARNING
To reduce the risk of fire or electric shock, do not
expose this product to rain or moisture. This product
should not be exposed to dripping or splashing. No
objects filled with liquids, such as vases, should be
placed on the apparatus.
The TV is unstable if it is not properly attached to the
base or mounted to the wall. Please follow the base
or wall mounting instructions provided in the User’s
Guide to ensure your safety.
WARNING
The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Refer to the identification/rating label located on the back panel of your product for its proper operating voltage.
FCC regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to
operate it.
Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code
(Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular,
specifies that the cable ground should be connected to the grounding system of the building as close to the point of
cable entry as practical.
Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft
carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced
lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top
and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces.
Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally
tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the
Important Safety Instructions on the next page.
The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very lowpower standby mode but will not completely turn the power off. In order to completely shut the power off, you will
need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used as disconnect device,
the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner
that allows you to disconnect the power cord when desired.
1.
2.
3.
4.
5.
6.
7.
8.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,
or has been dropped.
15. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and built-up static charges. Section 810
of the National Electrical Code, ANSI/NFPA No. 70-2011 (Section 54 of Canadian Electrical Code, Part 1)
provides information with respect to proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for the grounding electrode. See following
example:
ANTENNA LEAD
IN IN
WIRE
ANTENNA
LEAD
WIRE
GROUND CLAMP
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
ANTENNA DISCHARGE
UNIT(NEC
SEC TION
810-20)
(NEC
SECTION
810-20)
Product Registration
Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be
necessary. Registration is not required for warranty coverage.
GROUNDING
CONDUCTORS
GROUNDING
CONDUC
TORS
(NECSEC
SECTION
810-21)
(NEC
TION 810-21)
Product Information
Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the
serial and model numbers in case you need them. These numbers are located on the product.
Model No. ______________________
Purchase Date __________________
Serial No._____________________________________
Dealer/Address/Phone__________________________
GROUND CLAMPS
GROUND
CLAMPS
ELECTRIC
SERVICE
ELEC TRIC
SER VICE
EQUIPMENT
EQUIPMENT
POWER
SERVICE
GROUNDING
POWER SER
VICE GROUNDING
ELEC TRODE SYSTEM
ELECTRODE
SYSTEM (NEC ART
(NECPARTH)
ART 250, PA R TH)
250,
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No XMP Toolkit : 3.1-702 Create Date : 2014:04:30 15:12:16+08:00 Metadata Date : 2014:12:24 09:39:09+08:00 Modify Date : 2014:12:24 09:39:09+08:00 Creator Tool : Adobe InDesign CS5 (7.0) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 7996 bytes, use -b option to extract), (Binary data 7412 bytes, use -b option to extract) Instance ID : uuid:e1442f5e-4e04-45f3-a838-d54d094c6b42 Document ID : xmp.did:891D2D9D2DD0E3119F6EAF0FB6F39D0A Original Document ID : xmp.did:891D2D9D2DD0E3119F6EAF0FB6F39D0A Rendition Class : proof:pdf History Action : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:891D2D9D2DD0E3119F6EAF0FB6F39D0A, xmp.iid:3086043D31D0E3119F6EAF0FB6F39D0A, xmp.iid:3186043D31D0E3119F6EAF0FB6F39D0A, xmp.iid:AA5805A732D0E3119F6EAF0FB6F39D0A, xmp.iid:9281F52D34D0E3119F6EAF0FB6F39D0A, xmp.iid:76C9033A34D0E3119F6EAF0FB6F39D0A, xmp.iid:8A88046B34D0E3119F6EAF0FB6F39D0A, xmp.iid:E207EC9C34D0E3119F6EAF0FB6F39D0A, xmp.iid:A4153C9A35D0E3119F6EAF0FB6F39D0A, xmp.iid:BD6E084436D0E3119F6EAF0FB6F39D0A, xmp.iid:E214C94936D0E3119F6EAF0FB6F39D0A, xmp.iid:F1B8499536D0E3119F6EAF0FB6F39D0A History When : 2014:04:30 14:19:18+08:00, 2014:04:30 14:32:44+08:00, 2014:04:30 14:32:44+08:00, 2014:04:30 14:42:52+08:00, 2014:04:30 14:53:47+08:00, 2014:04:30 14:54:08+08:00, 2014:04:30 14:55:30+08:00, 2014:04:30 14:56:54+08:00, 2014:04:30 15:03:59+08:00, 2014:04:30 15:08:43+08:00, 2014:04:30 15:08:53+08:00, 2014:04:30 15:11+08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Doc Change Count : 56 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Has XFA : No Page Count : 2 Creator : Adobe InDesign CS5 (7.0)EXIF Metadata provided by EXIF.tools