TTE Technology LE32HDE5200 LED TV User Manual LE32HDE5200
TTE Technology, Inc. LED TV LE32HDE5200
LE32HDE5200 user manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1548570 |
| Application ID | tHaWA6df/B+HE+h3BbZWWQ== |
| Document Description | LE32HDE5200 user manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 159.45kB (1993130 bits) |
| Date Submitted | 2011-09-25 00:00:00 |
| Date Available | 2011-09-26 00:00:00 |
| Creation Date | 2011-07-28 14:24:18 |
| Producing Software | Adobe PDF Library 8.0 |
| Document Lastmod | 2011-07-28 14:26:46 |
| Document Title | LE32HDE5200 user manual |
| Document Creator | Adobe InDesign CS3 (5.0) |
LCD TV User’s Guide For use with models: LE32HDE5200 / LE40FHDE5200 Need Assistance? Please visit our website at www.tclusa.com or call 1-877-300-8837. Important Information CAUTION This symbol indicates that this product incorporates double insulation between hazardous main voltage and user accessible parts. When servicing, use only identical replacement parts. RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. WARNING WARNING To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. This product should not be exposed to dripping or splashing. No objects filled with liquids, such as vases, should be The TV is unstable if it is not properly attached to the base or mounted to the wall. Please follow the base or wall mounting instructions provided in the User’s Guide to ensure your safety. placed on the component. WARNING The batteries shall not be exposed to excessive heat such as sunshine, fire or the like. This symbol indicates that this product contains mercury. Special disposal of this product for environmental reasons may be required under the laws applicable to your jurisdiction. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. Refer to the identification/rating label located on the back panel of your product for its proper operating voltage. FCC regulations state that unauthorized changes or modifications to this equipment may void the user’s authority to operate it. Cable TV Installer: This reminder is provided to call your attention to Article 820-40 of the National Electrical Code (Section 54 of the Canadian Electrical Code, Part 1) which provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building as close to the point of cable entry as practical. Important: This television is a table model and is designed to sit on a firm, flat surface. Don’t place the TV on soft carpeting or similar surface because the ventilation slots on the bottom of the unit will be blocked, resulting in reduced lifetime from overheating. To assure adequate ventilation for this product, maintain a spacing of 4 inches from the top and side of the TV receiver and 2 inches from the rear of the TV receiver and other surfaces. Also, make sure the stand or base you use is of adequate size and strength to prevent the TV from being accidentally tipped over, pushed off, or pulled off. This could cause personal injury and/or damage to the TV. Refer to the Important Safety Instructions on the next page. The Power button (followed by the power symbol) on this TV and your remote control puts the TV into a very low-power standby mode but will not completely turn the power off. In order to completely shut the power off, you will need to disconnect the power cord from the outlet. The mains plug/appliance coupler is used as disconnect device, the disconnect device shall remain readily operable. Therefore, you should ensure that the TV is installed in a manner that allows you to disconnect the power cord when desired. Product Registration Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Product Information Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it here and record the serial and model numbers in case you need them. These numbers are located on the product. Model No. ______________________ Purchase Date __________________ Serial No._____________________________________ Dealer/Address/Phone___________________________ Important Safety Instructions 1. 2. 3. 4. 5. Read and follow all instructions. Keep these instructions. Heed all warnings. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Do not negate the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. 7. Protect the power cord from being walked on or pinched particularly at plugs, receptacles, and the point where it exits from the component. 8. Do not use this component near water. 9. Only use the attachments/accessories specified by the manufacturer. 10. Clean only with dry cloth. 11. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the component. When the TV is placed on a cart, use caution when moving the cart to avoid injury from tip-over. 12. Unplug this component during lightning storms or when unused for long periods of time. 13. Refer all servicing to qualified service personnel. Service is required when the component is damaged in any way, such as power supply cord or plug damage, liquid spilled on or objects falling onto the component, rain or moisture exposure, abnormal operation, or if the component has been dropped. 14. If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984 (Section 54 of Canadian Electrical Code, Part 1) provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See following example: ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT(NEC SEC TION 810-20) GROUNDING CONDUC TORS (NEC SEC TION 810-21) GROUND CLAMPS ELEC TRIC SER VICE EQUIPMENT POWER SER VICE GROUNDING ELEC TRODE SYSTEM ( NEC ART 2 50, PAR TH) Table of Contents Important Information ....................................................................................................................... 2 Important Safety Instructions .......................................................................................................... 2 Chapter 1: Connections and Setup .......................................................................................... 5 Before Initial Setup . .......................................................................................................................... 5 Check Supplied Parts ....................................................................................................................... 5 Attaching Your TV to the Table Stand ............................................................................................. 6 Mounting Your TV to the Wall . ......................................................................................................... 7 Buttons on the TV ............................................................................................................................. 8 Explanation of Jacks on TV . ............................................................................................................ 8 Choose Your Connections . .............................................................................................................. 9 Remote Control Functions ............................................................................................................... 11 Obtain the Signal ............................................................................................................................... 12 Switching on ...................................................................................................................................... 12 Switching off ...................................................................................................................................... 12 Initial Set-up ....................................................................................................................................... 13 Chapter 2: Menu Operation Menu Display ..................................................................................................................................... 14 Using Menu System .......................................................................................................................... 15 Picture Menu ...................................................................................................................................... 15 Sound Menu ....................................................................................................................................... 15 TV Menu ............................................................................................................................................. 16 Time Menu . ........................................................................................................................................ 16 Connetion Menu ................................................................................................................................ 17 USB Menu .......................................................................................................................................... 19 Parental Menu .................................................................................................................................... 20 Setup Menu ........................................................................................................................................ 22 Chapter 3: Other Information Frequently Asked Questions (FAQs) . ................................................................................................. 23 Troubleshooting ................................................................................................................................ 24 Care and Cleaning ............................................................................................................................. 26 Television Specifications . ................................................................................................................ 27 Limited Warranty................................................................................................................................ 28 Chapter 1 Connections and Setup Before Initial Setup Protect Against Power Surges • Connect all components before you plug any power cords into the wall outlet or power strip. • NEVER plug your TV into an outlet that is controlled by a wall switch. • Turn off the TV before you connect or disconnect any cables. • Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions. Safety Information • Protect components from overheating. • Don’t block ventilation holes on any of the components. Arrange the components so that air can circulate freely. • Don’t stack components. • If you place the component in a stand, make sure you allow adequate ventilation. • If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t harm other components. Avoid Audio Interference • Position cables properly; insert each cable firmly into the designated jack. • If you place components above the TV, route all cables down one side of the back of the TV instead of straight down the middle. • If your antenna uses 300-ohm twin lead cables, do not coil the cables. • Keep twin lead cables away from audio/video cables. Avoid Direct Light Don’t place the TV where sunlight or room lighting is directed toward the screen. Use soft or indirect lighting. Check Supplied Parts Check that the following parts were packed with your product. • • • • • • 1 Remote Control and 2 AAA Batteries; Audio/Video adapter cable; Comonent Video (YPbPr) adapter cable; User’s Guide; Quick Start Guide; Parts List for Table Stand (see page 6) Replacing your remote If you need to replace your remote, visit www.tclusa.com. A shipping and handling fee, and the appropriate sales tax, will be charged upon ordering. Have your Visa or MasterCard ready. Connections and Setup Attaching Your TV to the Table Stand Your TV comes without the table stand attached so that you can choose to mount your TV either to its table stand or to a wall (wall mount sold separately). If you want to mount your TV to the wall, don’t attach the table stand, remove the hinge cover and hinge. Follow the Mounting Your TV to the Wall instructions on page 7. First, remove the TV bag and place it on a large, flat surface such as a table or countertop. Remove the TV from the carton and place it face down on the TV bag. Be sure that the TV is face down to avoid scratching the screen. Then follow the steps below: Note: A for 32” model. B for 40” model . A-1 A-2 B-1 B-2 Connections and Setup Mounting Your TV to the Wall If you are mounting your TV to the wall, don’t attach the table stand, remove the hinge cover and hinge. To mount your TV to the wall, purchase a VESA wall mount. Model LE32HDE5200 Purchase a VESA 200 x 100, M4 screw Model LE40FHDE5200 Purchase a VESA 400 x 400 , M6 screw The VESA number is the horizontal and vertical measurement of the mounting holes. For example, 200x100 refers to the fact that the mounting measurements are 200mm horizontally and 100mm vertically. Notes: Follow the directions included with the wall mount to mount the TV to the wall. Caution: Your wall mount must be able to bear a minimum of five times the TV’s net weight to avoid causing damage. Connections and Setup Buttons on the TV If you cannot locate your remote, you can use the TV panel buttons on your TV to operate many TV features. CH (POWER button) Turns the TV on or to standby mode. CH+/- Selects channels stored in the channel list or acts as the up/down arrow (▲/▼) through the menu items. VOL VOL+/- Increases/decreases the volume or acts as the right/left arrow(◄/►) through the menu items.. (MENU button) Bring up the TV’s Main menu. (INPUT button) Selects the signal source. Explanation of Jacks on TV This section describes the jacks on the back panel of your TV. There are several ways to connect components. Ethernet (you must connect an Audio adpter cable with AUDIO OUT Adapter (you must connect an Audio adpter cable with two color jacks to this adpater jack first, red and white jacks for R AUDIO and L AUDIO connection) Use an RCA audio cable to connect your TV to a compatible audio receiver. (not availble in USB mode) VGA (PC IN) Connect your computer or other component with a VGA output to this jack using a 15-pin,D-sub cable. DVI/PC AUDIO IN (used for DVI/PC only) Provides audio connection when using HDMI/DVI INPUT 1 jack for DVI or when using VGA (PC IN). AV 2 IN adapter Lets you connect a component that has composite video jacks, such as a VCR or DVD player. (Note that you must connect an Audio/Video adpter cable with three color jacks to this adapter jack first, Yellow jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources, be sure to use the L AUDIO INPUT.) ANTENNA/CABLE IN Lets you connect a coaxial cable to receive the signal from your antenna, cable, or cable box. CMPT IN (Y Pb Pr) adapter Lets you connect a component that has component video jacks, such as a DVD player. (Note that you must connect a Component Video adpter cable with three color jacks to this adapter jack first: Green jack for Y, Blue jack for Pb and Red jack for Pr ) • Y Pb Pr (Component Video) Provides good picture quality because the video is separated into three signals. Use three video-grade or component video cables for the connection. CMPT AUDIO IN adapter (Note that you must connect an Audio adpter cable with two color jacks to this adapter jack first, red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources, be sure to use the L AUDIO INPUT.) Ethernet AUDIO OUT adapter DVI/PC AUDIO IN AV 2 IN adapter PC IN ANTENNA CMPT AUDIO /CABLE/SAT IN IN adapter CMPT IN adapter Connections and Setup USB1 / USB2 Allows you to connect a compatible mass storage device using a USB jack. USB 1 SPDIF(optical) - DIGITAL AUDIO OUT Use a digital optical cable to connect your TV to a compatible audio receiver. USB 2 HEADPHONE Allow you to connect headphones to listen to the sound coming from the TV. AV 1 IN adapter Lets you connect a component that has composite video jacks, such as a VCR or DVD player. (Note that you must connect an Audio/Video adpter cable with three color jacks to this adapter jack first, Yellow jack for VIDEO connection, red and white jacks for R AUDIO and L AUDIO connection. For mono audio sources, be sure to use the L AUDIO INPUT.) SPDIF (optical) HDMI 2 IN / HDMI 3 IN / HDMI 4 IN Lets you connect a component, such as a digital cable box, with an HDMI output for the best picture quality. AV 1 IN adapter HDMI 1/DVI IN (High-Definition Multimedia Interface/Digital Visual Interface) Provides an uncompressed digital connection that carries both video and audio data by way of an integrated mini-plug cable. Since HDMI technology is based on Digital Visual Interface (DVI), the jack on the back of your TV is also compatible with DVI components. Note: If using a DVI component, remember to connect the audio cable because the DVI cable carries only the picture signal, not the sound. HDMI 1 /DVI IN Choose Your Connections HDMI 2 IN HDMI 3 IN HDMI 4 IN There are several ways to connect components, such as DVD players and set-top boxes, to your TV. Please use the following chart to determine which connections are best for you. Proceed to the appropriate pages to connect your components. Note: No cables are supplied with this unit. Please purchase the necessary cables. A high-speed HDMI cable is recommended for better compatibility. Input Signal Compatability Antenna/Cable 480i, 480p, 720p, 1080i (NTSC, ATSC, and QAM formats) Composite Video 480i Component Video 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz HDMI 480i, 480p, 720p/60Hz, 1080i/60Hz, 1080p/60Hz PC VGA SVGA XGA HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Connections and Setup HDMI Connection (Best) Set-top box (Same connnection to HDMI 1 IN, HDMI 3 IN and HDMI 4 IN) Component Video Connection (Better) HDMI 2 IN HDMI cable or Pb Pr Composite Video Connection (Good) VIDEO AUDIO AUDIO AUDIO AUDIO Pr Pb Pr Pb CMPT Audio adapter cable CMPT AUDIO IN adapter VIDEO Audio/video adapter cable CMPT Video adapter cable CMPT IN adapter AV 1 IN or AV 2 IN adapter adapter INPUT TV AV1 AV2 CMPT1 CMPT2 HDMI 1 HDMI2 HDMI 3 HDMI4 HDMI/DVI Connection PC Connection VGA cable HDMI-DVI conversion cable Audio cable DVI/PC AUDIO IN HDMI 1/DVI IN 10 Audio cable DVI/PC AUDIO IN Connections and Setup Remote Control Functions (On/Off button) Turns the TV on or standby. 0-9 (Alphanumeric buttons) Enters a channel number, then press OK (or let the entry timeout). Enters a letter, a digit or a symbol in some functions. • (dot) To enter a digital channel with a sub-channel, enter the main channel; then, press the dot (•), the sub-channel, and then the OK button. INPUT Opens the Input list; then press INPUT repeatedly to select . the video input, or press (▲/▼) to highlight options, and .... press OK to select the desired option. VOL+/- Increases or decreases the TV volume. CH+/- Selects channels and external input mode. (Mute) Turns the volume on and off. (Connection) Enters the Connection menu. Goes to Yahoo main page. Goes to NETFLIX main page MENU ▲/▼◄/► Brings up the main menu or press to return to the previous . menu; to access or exit virtual keyboard. (arrows) Highlights different items in the TV menu and adjusts the menu controls. ZOOM+/- Selects the desired screen format. OK Displays Channel List menu. When the TV is in the menu . system, press to confirm your selection. BACK Returns you to the previously viewed channel. CANCEL Exits the menu. INFO If no menus are currently active, press the INFO button to . display the Channel Banner. USB TV SLEEP Goes to the USB menu. Goes to the TV mode. set the TV to turn off after a given amount of time. GUIDE Toggles the Electronic Programme Guide between on and . off. Only available for digital channels. FAV Displays the favorite channel list. CH LIST Displays the channel list menu. PIC Selects picture mode. SOUND Selects sound mode. CC Enters the CC menu. Colored Not available. buttons ◄ (Previous) Goes to the previous chapter. (Stop) Stops viewing. ► (Play/Pause) Starts, pauses or resumes viewing ► (Next) Goes to the next chapter. ◄◄ Searches backword. ►► Searches forward. 11 Connections and Setup Obtain the Signal The first step in connecting your TV is obtaining the signal. The back panel of your TV allows you to receive analog and/or digital channels by using the ANTENNA/CABLE/SAT IN. Connect the outside aerial or cable network to the ANTENNA/CABLE/SAT IN socket on the back of the TV set to ANTENNA Outdoor or indoor Antenna /CABLE/SAT IN receive off-air channels or cable channnels. • If you have a set-top box, you may need to call your cable company or satellite service provider. They may commend Or special cables to allow you to view digital channels. • The aerial socket (75 OHM - VHF / UHF / cable) can be used Or for connecting an external aerial or other equipment fitted with a modulator (video recorder, satellite receiver, etc.). We RF Coaxial recommend that you do not connect other equipment (video Wire Cable Box, (75 ohm) ( Wall Outlet) recorder, satellite receiver, etc.) to your TV set to begin with, so as not to complicate the set-up procedure with the additional steps involved. Connect them when you have finished setting up the channels. • Visit www.antennaweb.org for help in deciding what type of antenna to use in order to receive the local digital channels available to you. Enter your location, and the program will list local analog and digital stations available using your antenna. Switching on Follow the instructions on this page on how to switch on your TV set and use the remote control before going on to following pages describing how to use the channel scan procedure. 1. Insert two AAA batteries in the remote control. Precautions on using batteries: - Only use the battery types specified. - Make sure you use the correct polarity. - Do not mix new and used batteries. - Do not use rechargeable batteries. - Do not expose batteries to excessive heat such as sunshine, fire or the like, throw them in a fire, recharge them or try to open them, as this could cause them to leak or explode. - Remove the batteries from the remote control if you are not using it for a long period of time. 2. Connect the power cable to a mains socket. (If the power cable is not connected to the television, please first connect the power cable to the television.) Your TV set should only be connected to an AC supply. It must not be connected to a DC supply. If the plug is detached from the cable, do not, under any circumstances, connect it to a mains socket, as there is a risk of electric shock. 3. When powered on, if the TV set is in standby mode, press TV. Switching off on the remote control or on the TV set to turn on the To put the TV set into standby mode, press on the remote control or on the TV, the TV set remains powered up, but with low energy consumption. To switch off the TV set, unplug the mains socket from the mains outlet. 12 Connections and Setup Initial Set-up Initial Setup Initial set-up involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter. Initial Setup Please select your language: English Espanol The first time you switch the set on, the Initial setup wizard opens, which guides you through the initial setup process. Press OK to start your initial setup. (See figure 1) Back 1. Press ▲/▼ to select your language, then press OK/► to enter the next step. 2 A menu screen asks you to set the TV Location. • Choosing “Home” for the TV Location assigns the optimal picture settings for most home environments. • Choosing “Retail,” which is not Energy Star compliant, sets the unit up with predefined settings for retail displays. In this setting, the power consumption may exceed the requirements of the Energy Star® qualification. Use ▲/▼to select the desired location setting (Home/ Retail); then press OK/► to continue to the next screen. Select Initial Setup Next Exit Exit TV Locaiton Please select your TV Location: Home Retail This mode is energy star compliant. Back Select Initial Setup 3 Use ▲/▼ to select the current local time zone. Press OK/► to continue to the next screen. Auto Channel Scan Back Select Hawaii Alaska Pacific Mountain Central Eastern Atlantic Newfoundland Next Initial Setup Note: If you are using a satellite or cable set-top box, you do not have to complete the Channel Search. Exit Exit Time Zone Please select your country: 1. On the Tuner screen, select either Antenna or Cable/Sat. Press OK/► to continue to the next screen. Next Exit Exit Tuner Please select your Tuner mode: Antenna Cable 2. The Channel Scan screen is now displayed. The default choice is to scan. Press OK/► to begin the channel scan for available channels to be stored in the TV’s memory. Back Note: If you do not want to scan for channels at this time, press the OK button or right arrow ( ) to stop the scanning process. Select Initial Setup 3. The screen will change to show the progress of the scanning process. Next Exit Exit Channel Scan First, please connect antenna Scan Skip Scan 4. When the scanning is finished, the unit has completed the Initial Setup. Start channel scan now? If you skip this channel, 5. Press CLEAR to exit the Wizard and begin watching TV. Back 13 Select Next Exit Exit Chapter 2 Menu Operation Menu Display Picture ECO Picture preset Back Light 60 Off Adaptive Back Light Picture Sound Options PAP Select Menu Exit Media Smart TV Back Exit Version Info OK Menu Exit 50 Saturation 50 Tint Sharpness Color Temperature Advanced Settings Advanced Setting Balance Bass 50 Treble 50 Sound Surround On Speaker Off SPDIF Type Off Auto Volume Control Off Back MTS Exit Stereo Audio Language English Medium DNR Select Enter 50 Contrast Setup Lock Sound CEC Brightness MEPG NR Low Adaptive Luma Control Medium Flesh Tone Medium DI Film Mode Auto Blue Stretch Off Select Menu Exit Back Exit Parental Time Setup Channel Block Program Block Time Zone Input Block Time Off Sleep Timer Change Password Clean All OK Enter Select Select Menu Exit Menu Back Exit Back Exit Exit TV Setup OSD Language English Screen mode Normal DPMS Off Tuner Mode Cable Channel Scan Off Skip Channel Closed Caption System Info OK Enter Reset Default Off Select Select Menu Exit Menu Back Exit Exit 14 Back Exit Menu Operation Using Menu System This section explores the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. To access the menu system: 1. Press Menu to display the main menu. 2. Press ▲/▼/◄/► to select the desired item, then press OK to open the corresponding submenu. 3. In submenus, use ▲/▼ to select menu options, use ◄/►to set functions or change values. Press OK to activate a setting. Use OK/► to open the corresponding submenu. 4. Press Menu to return to the previous menu or press Exit to close the menu. Picture Menu The menus for adjusting the picture are used to obtain the best picture settings according to your preference, the type of program you are watching and the ambient lighting. Display the main menu by pressing Menu and select Picture, then press OK to confirm. The Picture options are as below: Note: some options may be not available for certain signal sources. Picture Mode: displays a list that lets you select one of the preset picture settings: Natural, Sports, Personal or ECO, Vibrant, Cinematic. Choose the setting that is best for your viewing environment. Note: ECO is the default setting, if you select some other options, the power consumption may change. Back Light: adjusts the backlight level which affects the overally brilliance of the picture. the menu line is grayed out by default. Only when “Adaptive Backlight”and “Light Sensor” are both set to “Off”, the menu line can be adjustable. Adaptive Back Light – This option automatically adjusts the brightness of the backlight according to the content of the incoming signal. Adaptive Backlight optimizes the picture quality and decreases power consumption. Note: When Light Sensor or Dynamic Backlight is set to Off, the power consumption may exceed the Advanced video: press OK/► to display its submenu. DNR(Dyanmic Noise reduction): diminishes picture artifacts caused by the digitizing of image motion content that may be present in the picture. . Press ◄/► to choose between these options: Off/ Low/Medium/Strong/Auto. MPEG NR (noise reduction) feature allows you to reduce visible interference caused by MPEG compression. Adaptive Luma Control ‘automatically adjusts the brightness and contrast after analysing the input signal. Flesh Tone activation of this feature may result in a more pleasing production of sky and flesh color. DI Film mode Blue Stretch HDMI Mode VGA Mode Light Sensor – When activated, this feature monitors the ambient light conditions in the room and adjusts the TV’s backlight for optimum viewing. It also serves as an energy-saving feature by lowering the backlight power level when appropriate (typically in darker conditions). Note: some options may appear in the next page of Picture menu, you can press ▲/▼ to switch. Sound Menu The Sound Menu lets you adjust audio output. Display the main menu by press Menu and select Sound, then press OK to confirm. The Sound menu appears with the following options: Balance: adjusts the amount of audio sent to the left and right speakers. Bass: adjusts for bass boost or bass attenuation. Treble: adjusts for treble boost or treble attenuation. Sound Surround: selects for the simulated surround sound feature to be On or Off. requirements of the Energy Star® qualification. Sound Mode: selects a sound mode from the list depending on the programme you are watching. Brightness: adjusts the brightness of the picture. Contrast: adjusts the difference between light and dark areas of the picture. Tint - This option adjusts the balance between the red and green levels. Speaker – Selects to turn the internal speakers On or Off. SPDIF Type – This option controls the type of audio stream sent to the Digital Audio Output jack. Available options are Dolby Digital, PCM, or Off. Saturation: adjusts the richness of colour. Sharpness: adjusts the crispness of the edges in the picture. Color Temperature - Adjusts the color temperature from cool to warm. Auto volume control : select On mode to reduce the annoying blasts in volume during commercial breaks and also amplifies softer sounds in program material. Eliminates the need to constantly adjust the volume. 15 Menu Operation MTS– This option controls the manner in which the sound comes through your speakers. Options available vary according to the input selected. • Mono (available for regular TV viewing only) – This option plays the sound in mono only. Use this setting when receiving broadcasts with weak stereo signals. • Stereo – This option splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio. • Second Audio Program (SAP) – This option plays the program’s audio in a second language, if available. . SAP audio is broadcast in mono only. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired. Audio Language– Press ◄/► to choose from the list of languages available for the program you’re watching. The language chosen becomes your preferred language for all digital channels until you turn the TV off. If the language chosen is not being broadcasted with a program, the TV plays the default language for the program (usually English in the US). TV Menu When you first used your TV you will have setup your TV for DTV / TV channels using the Initial Setup screens. If you did not do this or if your setup has changed, you can do this from the TV menu. Tuner mode: chooses the type of signal (Cable/Sat or Antenna) depending upon which equipment you have connected to the ANT/CABLE/SAT IN. Channel Scan: selects this item and press OK/► to start channel scan automatically. (Note: If you wish to stop the search, press the CLEAR button.) When you perform a Channel Scan, your TV searches for channels with signals and stores the channel information in the Channel List. Then, as you watch TV and press CH+ or CH-, your TV goes to the next or previous channel in the Channel List and skips the channels that do not have signals. If the TV signal source changes – for example, if you change from an outdoor antenna to cable TV – you will need to rescan for channels. Channel Skip: After the TV has stored all of the available channels in memory you will find that some channels will be too weak to watch comfortably or they may be channels you do not want to see, you can hide these channels in the channel list. 1 press OK/► to open Channel Skip menu. 2 use ▲/▼ highlight the channel you wish to skip; then press OK to check the highlighted channel. You can add the channel back into the Channel List by highlighting it and un-checking it. Time Menu Time Zone You can set the correct Time Zone for your area. To choose a time zone: 1. Select Time > Time Zone, then press OK/► to open Time Zone screen 2. Press ◄/► to select the time zone for your area. 3. Press the MENU button to go back to the previous screen, or press the CLEAR button to close the menu. Time: press OK/► to open Time screen Auto synchronization: use ◄/► to select On or Off. If On selected, the TV will get the time automatically from DTV signals, and the Time item cannot be adjusted. If you select Off, you should set date and time at Date and Time item. Highlight Date or Time, use ◄/► to select input space, enter the current date or time by using the number buttons. Note: if Off selected, the time set in Time option will not be memorized when turning on the TV next time, and the TV 's time will start from the default. Power on timer: use ◄/► to select Once, Daily or Off. If you select Once or Daily, you should set a time period after which the TV automatically switches to on at Timer below this item. Highlight Timer, use ◄/► to select input space, enter the on time using the number buttons. Power on channel: press OK/► to display its submenu. Highlight Select mode, use ◄/► to select Last status, the power on channel will be the last channel you watched before powered off. Or you can select User select, then press ▲/▼ to select the channel you want to watch when the TV is turned on automatically next time, and press OK to confirm. 16 Menu Operation Power off timer: use ◄/► to select Once, Daily or Off. If you select Once or Daily, you should set a time period after which the TV automatically switches to off at Timer below this item. Highlight Timer, use ◄/► to select input space, enter the off time using the digit keys. Sleep timer: sets a period of time after which the TV set goes into standby mode. Use ◄/► to set the period (120 minutes maximum). To disable this function, select Off. Connection Menu Note: you can push Settings button to customize your desired settings. 2. - Select Library > Add to Libray. - Select your personal folders or folders of other users that you can access for sharing. - Select Add and press OK to enable your adding. Share & See application 1. Select Conenctions > Share & See, then press ◄/► to select On. 2. Press Menu on the remote control and select Media, then press OK to launch Share & See applications. Stopping Share & See function Netflix You can set the correct Time Zone for your area. To choose a time zone: 1. Select Time > Time Zone, then press OK/► to open 1. Select Conenctions > Configuration > Internet connection, and set it to Off. 2. Or select Conenctions > Share & See, and set it to Off. Time Zone screen 2. Press ◄/► to select the time zone for your area. 3. Press the MENU button to go back to the previous screen, or press the CLEAR button to close the menu. You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection. Youtube You can set the correct Time Zone for your area. To choose a time zone: 1. Select Time > Time Zone, then press OK/► to open Time Zone screen 2. Press ◄/► to select the time zone for your area. 3. Press the MENU button to go back to the previous screen, or press the CLEAR button to close the menu. Share & See Note: This manual covers products with Share & See . Share & See is DLNA-compatible. Connecting to your PC Make sure to set up a wired or wireless connection from your TV to a router first. Then connect your PC to your router either through a network cable or wirelessly. Follow the steps in turn specified hereafter, then you can enjoy recorded video, picture, music and/or text files saved on your PC. Adding media from your PC for sharing Install a DLNA media server in your PC. The simple and familiar server you may install is Microsoft Windows Media Player 11. Allow your TV to share the designated files on your PC. 1. Open Microsoft Windows Media Player 11. - Select Library > Media sharing. - Check the checkbox Share my media to. - Select the icon of the TV set connected to your PC. - Select Allow to allow the TV set to access your PC, and select OK to enable your allowing. Network connection Connecting to a wired network You can attach your TV to your LAN using cable in three ways: • You can attach your TV to your LAN by connecting the LAN port on your TV to an external modem using a Cat 5 cable. • You can attach your TV to your LAN by connecting the LAN port on your TV to a IP Sharer which is connected to an external modem. Use Cat 5 cable for the connection. • Depending on how your network is configured, you may be able to attach your TV to your LAN by connecting the LAN port on your TV directly to a network wall outlet using a Cat 5 cable. Note that the wall outlet is attached to a modem or router elsewhere in your house. Select Connections > Configuration > Internet connection, then select Ethernet to connect to a wired network. Connecting to a wireless network To connect your TV to your network wirelessly, you need a wireless router or modem and a Wireless LAN adapter. Recommend connecting your Wireless Lan adapter to your TV’s USB 1 port. 1. Select Options > Network > Configuration > Interface, then select Wireless to connect to a WiFi wireless network. 2. Select Wireless setting and press OK/► to enter. 3. Connection Methods: you can setup the wireless network connection three ways. - Scan • Select Wireless setting > Scan, then press OK/►, the TV will scan all access points within range. The access points found by the TV will be displayed. • Select an available access point, then press OK/► to connect the TV to it. 17 Menu Operation Notes: Network Setup - If you select a protected access point, you will 1. Press Menu on the remote control and select have to enter the corresponding password. Press Options > Network > Configuration > Internet Menu on the remote control to display virtual connection. Press ◄/► to select On. Wait until the keyboard to enable you to enter it. connection is automatically established. - This set has a memory function of available 2. Select Options > Network > Configuration > access point, which enables your set to be Connection test, then press OK/► to check the connected to the network even if you switch on TV Internet connectivity. If it doesn't work, follow below after power off. step to make sure the connectivity. - Manual 3. Select Options > Network > Configuration > IP Select Wireless setting > Manual, then press setting, then press OK/► to enter the IP setting OK/►, you will be prompted to enter the correct menu. SSID of an available wireless router to setup the - Set Address type to Auto, it will acquire and enter connection. the needed IP address automatically. - Auto - You can follow below steps to enter your IP address If your AP supports WPS (Wi-Fi Protected manually. Setup), you can connect to the network via PIN • Set Address type to Manual, then press ▼ to go (Personal Identification Number) or PBC (Push to the first entry field. Button Configuration). WPS will automatically • Enter the IP address, Subnet mask, Default configure the SSID and WPA key in either mode. gateway, Primary DNS and Secondary DNS Select Wireless setting > Auto, then press OK/► values. Use the digit buttons to enter numbers to enter. and the arrow buttons to move from one entry • PIN: select PIN, then press OK/► to enter. field to another. Generate a random PIN code and make sure - After setting, select Options > Network > this code is installed to the AP (for the procedures, Configuration > Connection test to check the refer to your router manual), then press OK/► Internet connectivity again. again to setup the connection. 4. Select Options > Network > Configuration > • PBC: If your router has a PBC push button, select Information, then press OK/► to display the PBC, then press OK/► to enter. Press PBC push information on current connection, such as Interface, button on your router within 2 minutes after you Address type, IP address, etc.. press OK/► again. Your TV will automatically acquire all the network setting values it needs and connect to your network. 18 Menu Operation USB Functions Your TV is fitted with a USB connector that enables you to view photos, listen to music or watch videos stored on a USB storage device. Supported file formats: Picture: JPEG Music: MP3 Video: AVI, MP4, MPG, MPEG, TS… Note: some USB keys and USB products like digital cameras or mobile phones are not fully compatible with USB 2.0 standard so it may not work with the TV multimedia player. Not all USB keys or devices are compatible for the USB function. Photo To display photos if available. 1. Select Media > Photo, then press OK to enter the main file content browser. 2. In the main file content browser, use ▲/▼/◄/► to select a photo or an inner file folder. 3. Select an inner file folder, press OK to enter a sub file content browser. 4. Use ▲/▼/◄/► to select a photo in either main or sub file content browser, press Menu to display the photo menu in the folder mode. - Sort: sort folders and photos by modification Date or Name. - Edit: copy, paste or delete a selected photo. - Parser: you can select Recursive to display photos from all sub file folders. 5. Select a photo, press OK to watch, and a slide show begins from the selected photo. Press OK to pause the photo if you want to rotate or zoom the paused photo. Press Menu to display the photo menu in the browser mode. You can play, pause or rotate the photo, select different play mode, zoom mode and displaying effect, etc.. 6. Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen. Music To playback music if available. 1. Select Media center > Music, then press OK to enter the main file content browser. 2. Use ▲/▼/◄/► to select a song in either main or sub file content browser in the same way as in photo display function, press Menu to display the music menu in the folder mode. - Sort: sort folders and songs by Name, Genre, Artist or Album. - Edit: copy, paste or delete a selected song. - Parser: you can select Recursive to display songs from all sub file folders. 3. Select a song, press OK to play, and an automatic playback begins from the selected song. Press Menu to display the music menu in the browser mode. You can play or pause the song, select different play mode, etc.. 4. Press the related buttons on the remote control to perform the available functions shown on the function bar at the bottom of the TV screen. Video To watch video if available. 1. Select Media Center > Video, then press OK to enter the main file content browser. 2. Use ▲/▼/◄/► to select a video in either main or sub file content browser in the same way as in photo display function, press Menu to display the video menu in the folder mode. - Sort: sort folders and videos by Type, modification Date or Name. - Edit: copy, paste or delete a selected video. - Parser: you can select Recursive to display videos from all sub file folders. 3. Select a video, press OK to watch, and an automatic playback begins from the selected video. Press Menu to display the video menu in the browser mode. You can play or pause the video, select different play mode, screen mode and preset picture settings, etc.. 19 Menu Operation Parental Menu The choices in the US V-Chip and Canada V-Chip menus involve software inside your TV, referred to as V-Chip, which allows you to block TV programs and movies. TV programs can be blocked by age-based ratings, such as TV-MA . If available, TV programs can also be blocked by content, such as adult language (L) . Movies can only be blocked by age-based ratings . Once you block programs, you can unblock them by entering a password. By default, the software inside your TV is turned off or unlocked. V-Chip - US and Canada V-Chip reads the program’s age-based rating (TV-MA, TV-14, etc.) and content themes (Violence (V), Adult Language (L), etc.). If you have blocked the rating and/or content themes that the program contains, you receive a message that the channel is currently blocked. Change the channel or press OK to enter your password and temporarily deactivate the parental controls. Broadcasters are not required to provide content themes, so programs received with no content themes are blocked only if you block their age-based rating. You can also block programs that have been given an Exempt rating, and programs that are considered unrated. Change V-Chip Password The first time you enter the Parental menu, you must set a password in order to adjust other parental control settings. To enter a V-Chip Password, follow these steps: 1. Selelct Parental>Change Password, press OK/► to enter the Change Password screen. 5. Use the number button to enter the four-digit number for your password. 6. Re-enter the same code to confirm the password. Note: The Password must be entered before the TV will continue with Parental settings next time. The super password is 2458, If you forget your password, enter it to override any existing password. Channel Block To block a specific channel, follow these steps: 1. Select Parental > Channel Block, press OK/► to enter the next screen with channnel list on. 2. Press ▲/▼ to select the channel you wish to block. 3. Press OK to place a checkmark in the box to block that channel. When you tune to that channel, you will need to enter a password to view the channel programming. V-Chip Rating Enable You must remember to set Rating Enable to On mode to have the following V-Chip rating limits to take effect. Select Parental>V-Chip>Rating Enable, then press to turn this option on or off. US V-Chip TV Ratings You can automatically block all program ratings above a specified age-based rating level. Select Parental>V-Chip>Rating Enable, press OK/> to enter the US TV Ratings screen. In the Block TV Rating panel you can customize the program blocking of the following TV ratings: TV –Y – All children TV –Y7 – Older children TV –G – General audience TV –PG – Guidance suggested TV –14 – Strongly cautioned TV –MA – Mature audience You can also customize the TV ratings for the following content: A – Sexual dialog D – Sexual dialog L – Adult language S – Sexual situations V - Violence FV – Fantasy violence Press ▲/▼/◄/► to navigate through the TV rating options. Press the OK button to block (locked) or allow (unlocked). 20 Menu Operation US V-Chip Movie Rating Limit You can automatically block all program ratings above a specified age-based rating level. Select Parental>V-Chip>Rating Enable, press OK/> to enter the US TV Ratings screen. IIn the Block Movie Rating panel you can customize the program blocking of the following Movie ratings: G – General audience PG – Parental guidance suggested PG-13 – Recommended for children 13 years of age or older R – Mature audience NC-17 – No one under 17 years of age X – No one under 17 years of age Press ▲/▼ to navigate through the Movie rating options. Press the OK button to block (locked) or allow (unlocked). Canadian V-Chip Ratings You can automatically block all program ratings above a specified age-based rating level. Select Parental>V-Chip>Rating Enable, press OK/> to enter the US TV Ratings screen. IIn the Block Movie Rating panel you can customize the program blocking of the following Movie ratings: G – General audience PG – Parental guidance suggested PG-13 – Recommended for children 13 years of age or older R – Mature audience NC-17 – No one under 17 years of age X – No one under 17 years of age 1. Select Parental>Unrated/Exempt Ratings, press OK/> to enter the US TV Ratings screen. 2 Press ◄/► to toggle between View and Block. View All unrated programs are available. Block All unrated programs are not available. Reset Downloadable Data 1. Select Parental>Unrated/Exempt Ratings, press OK/> to enter the US TV Ratings screen. 2. Select this option to reset the downloadable V-Chip data. When you select this option, a confirmation box opens. Press ◄/► to select. 3. Press OK to reset the downloadable rating data, if present. Input Block Select Parental>Unrated/Exempt Ratings, press OK/> to display the Input Source List screen. 2. Press ▲/▼ select the video input you want to lock. then press OK to to confirm your selection. A locked / unlocked icon appears next to the selected input. When you tune to that input, you will need to enter a password to view the channel. Press ▲/▼ to navigate through the Movie rating options. Press the OK button to block (locked) or allow (unlocked) Open V-Chip - allows you to select the downloadable rating level. In the event that a new rating system is provided by the broadcaster, the new rating options would appear within this menu. Blocking Unrated/Exempt Programs The Unrated/Exempt Ratings option lets you decide if programs that the V-Chip recognizes as unrated or exempt can be viewed. Unrated TV programs may include news, sports, political, religious, local and weather programs, emergency bulletins, public announcements, and programs without ratings. The Exempt option applies to both US and Canadian unrated programs and Canadian programs rated E. 21 Menu Operation Setup Menu Closed Caption OSD Language: press ◄/► to select the preferred language (English or Espanol) for all menus. Many programs are encoded with closed captioning information, which allows you to display the audio portion of a program as text on the TV screen Note: Closed caption settings are not available for HDMI, CMPT or PC INPUTS. These settings must be set in the connected component’s menu. Closed captioning is not available on all channels at all times. Only specific programs are encoded with closed captioning information. The Setup menu allows you to configure the TV with your preferences. Display the main menu by pressing Menu and select Setup, then press OK to display its options: Screen Mode Screen format refers to the way the picture is displayed on your TV. Analog video is sent in a 4/3 format, which your TV displays in a 16/9 format. Most digital video is sent in a 16/9 format which fills your screen, but it sometimes is sent in 4/3, which does not fill your screen. It depends on how the station or component connected to your TV is formatting the video. If there are bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars. Some bars can’t be removed because of the way the format is sent by the broadcaster. Press ZOOM -/+ repeatedly to cycle through the available display formats. Press the ZOOM -/+ button on your remote to see if a different format is available for the video you are viewing. The format changes as you press the ZOOM -/+ button, and the format type is displayed at the bottom left of the screen. DPMS(Display Power Management Signaling) auto off feature setting this option to On mode allows the TV to act like a PC Monitor and go into sleep mode and turn back on by the movement of the mouse or keyboardWhen using a normal monitor on a computer and you set the computer to set the monitor to standby after a certain amount of time - the monitor is switched off (standby) when the time comes .. This TV does the same thing if it connected via its VGA port but when connected via HDMI it does not - it will stay on forever (even if the computer is switched off) .. all it’ll say is “no signal” but will not go off. When using a normal monitor on a computer and you set the computer to set the monitor to standby after a certain amount of time - the monitor is switched off (standby) when the time comes . This TV does the same thing if it connected via its VGA port but when connected via HDMI it does not - it will stay on forever (even if the computer is switched off) .. The Closed Caption options are: CC Setting – This option allows you to choose the way closed captioning information appears on the screen. Off - No captioning information displayed. On Always – Choose this option if you want captioning information to be shown whenever available. On When Muted – This option allows the closed captioning to display (when available) whenever the TV’s sound is muted. The captioning information is not displayed when the sound is not muted. Analog CC Type – This option lets you select the captioning mode used for displaying caption information, when available. If you are unsure of the differences among the modes, you may prefer to leave the closed captioned mode set to CC1, which displays complete text of the program in the primary language in your area. Digital CC Type If available, this allows you to select a closed caption service mode (1-6) for digital channels. Digital CC Preset If available, this allows you to select between Off and On options. On mode allows you to set the options below. Digital CC Style – This option lets you customize the following display options, if available: Caption Style – Select either As Broadcaster or Custom options. If you choose Custom options, the setting changes according to the options you choose. Font Size – Set the size of the digital closed caption text: Default, Small, Standard or Large. Font Style - Select a character design for the digital closed caption text. A font is a complete assortment of letters, numbers, punctuation marks, etc. in a given design. You can choose from a variety of fonts. (Default, Style 0-7). all it’ll say is “no signal” but will not go off. 22 Chapter 3 Other Information Frequently Asked Questions (FAQs) What’s the quickest way to view High Definition (HD) video? Connect an off-air antenna to the ANT/CABLE/SAT IN to view free local digital channels. You may need to purchase an antenna. (See page 10 for more information). Visit www.antennaweb.org for assistance in deciding what type of antenna to use to receive the local digital channels available to you. By entering your location, this mapping program tells you which local analog and digital stations are available using a certain antenna. Are there other ways to view High Definition (HD) video? Besides using an off-air antenna as mentioned above, you can also use a set-top box to receive digital video. Contact your cable company or satellite provider to purchase digital programming and have them connect the box to ensure you are viewing channels the best way. How do I tell an analog channel from a digital channel? Press the INFO button to display the Channel Banner. Look at the bottom right corner of the screen. The dot (•) is displayed for a digital channel. If there is no dot, it is an analog channel. Why are there bars on my screen and can I get rid of them? Most digital video is sent in a 16/9 format which fills your screen, but is sometimes sent in 4/3 which does not fill your screen. It depends on how the station or device connected to your TV is formatting the video. If there are bars on the screen, press the ZOOM -/+ button to try a different format that may eliminate the bars. Some bars can’t be removed because of the way the format is sent by the broadcaster. The format changes as you press the ZOOM -/+ button and the format type is displayed at the bottom left of the screen. For more information on screen formats, go to page 18. Why does channel search find a lot of channels, but when I try to tune to them, there’s nothing there? Some channels enabled by the cable company don’t carry programming, such as video ondemand. When channels are unavailable, your TV screen is blank or appears like snow. You probably want to remove these channels from your Channel List. Remove these in the Channel Skip Menu. Go to page 24 for more information. Why does the first channel search take a long time? If you have both analog and digital channels, the TV is looking for all available channels in the Channel List. If you do have digital channels, the TV is also searching for scrambled channels, non-scrambled channels, and each sub-channel of that digital channel. 23 Other Information Troubleshooting Most problems you encounter with your TV can be corrected by consulting the following troubleshooting list. TV Problems The TV won’t turn on. • Make sure the TV is plugged in. • Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in another device. • The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls. • Select the Button Block feature on the Parental Control menu and press OK to uncheck the box. There is no picture and no sound but the TV is on. • You may be tuned to an input with no component connected to it. If you’re trying to view a connected component, press INPUT until the picture from that component appears. • The Signal Type option may be set incorrectly. Go to page 23 for detailed instructions. • The channel may be blank. Try changing channels. • If you’re watching your VCR and it’s connected with coaxial cable to the ANT/CABLE/SAT IN jack, tune the TV to channel 3 or 4 (whichever channel is selected on the 3/4 switch on the back of your VCR). Also make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR). The sound is fine, but the picture is poor quality. • If you’re getting a black and white picture from a component you’ve connected to your TV, you might have your video cables connected to the wrong jacks. A yellow video cable connects to the yellow VIDEO INPUT jack on the side or back of your TV; three video cables or bundled component video cables (red, blue, and green) connect to the corresponding COMPONENT INPUT jacks on the back of your TV. • Check the antenna connections. Make sure all of the cables are firmly connected to the jacks. There is no sound, but the picture is fine. • The sound might be muted. Try pressing the volume up button to restore sound. • If using DVI or Y, PB, PR, remember to also connect the device’s left and right audio output jacks to the TV’s L and R AUDIO INPUT jacks. • The sound settings may not be set correctly. Go to page 22 for more information. • If your audio source has only one jack or is a (mono) audio source, make sure you have plugged the connection into the L AUDIO INPUT jack on the TV. The screen is blank. • Check your connections. If you used yellow, red, and white cables to connect, make sure they’re connected to the red, white, and yellow AUDIO/VIDEO INPUT jacks on the side or back of the TV. • If you’re trying to watch something that’s playing on a component connected to the TV (like a DVD), press INPUT until you get to the correct video input channel. • Make sure the component connected to the TV is turned on. • Try another channel. 24 Other Information The buttons on the TV panel don’t work. • The TV panel controls may be locked (disabled). Use the remote control to unlock the TV panel controls by selecting the Button Block feature in the Parental Control Menu and press the left or right arrow ( ) to uncheck the box. • Unplug the TV for 10 minutes and then plug it back in. Turn the TV on and try again. The TV turns off unexpectedly. • The electronic protection circuit may have been activated because of a power surge. Wait 30 seconds, and then turn the TV on again. If this happens frequently, the voltage in your house may be abnormally high or low. • Unplug. Wait 10 minutes. Plug in again. You can’t select a certain channel. • The channel may be blocked or not approved in the Parental Control Menu. • If using a VCR, check to make sure the TV/VCR button on the VCR is in the correct mode (press the TV/VCR button on your VCR). • Press the TV button and then try to change channels. The stereo reception is noisy. • It may be a weak station. Use the Sound Menu and Analog TV Sound to choose mono. A black box appears on the screen. • Closed captioning might be on. Check Closed Caption in the Setup menu. Go to page 26 for more instructions. You are having problems with the HDMI Connection. • Make sure the HDMI or DVI component is turned on and the cables are firmly connected. If problems still occur, turn off your component and reconnect it. Reset the power by unplugging the power cord and plugging it back in. • If you are tuned to the HDMI 1, HDMI 2 or HDMI 3 INPUT and you’re receiving Unusable Signal message onscreen, press the INFO button on the remote. If Acquiring Channel appears in the Channel Banner, the HDMI or DVI device isn’t responding. Contact the manufacturer of the HDMI or DVI device for further assistance. • If you tune to the HDMI 1, HDMI 2 or HDMI 3 INPUT and you see snow, the video goes in and out, or the video takes a long time to appear, your HDMI or DVI component is having trouble sending video information to the TV. Reconnect your device. Reset the power by unplugging the power cord and plugging it back in. If problems persist, try connecting the Y Pb Pr jacks if they are available or contact the manufacturer of the HDMI or DVI component for further assistance. • If you have black bars on each side of your picture, the component you connected might have a switch or a menu option allowing you to change the picture quality output that will fix this. Choose either 720p or 1080i. 25 Other Information The remote control doesn’t work. • Something might be between the remote and the remote light sensor on the front of the TV. Make sure there is a clear path. • The remote may not be aimed directly at the TV. • The batteries in the remote may be weak, dead, or installed incorrectly. Put new batteries in the remote. The Universal Remote control doesn’t work. This TV utilizes new remote control signals and may not be compatible with your existing universal remote (e.g. satellite box remotes, cable box remotes, and generic universal remotes, etc.). Over time, newer universal remotes will become available that should pick up the new TV codes. You are experiencing problems with V-Chip/Parental Controls. If the rating limits don’t work, you must lock the settings. Go to the Main Menu (press MENU on your remote), select Parental Control. Select V-Chip and then press the left or right arrow ( ) to proceed to the next screen. Rating Enable is highlighted. Press the left or right arrow ( ) to select On to have the rating limits take effect. The V-Chip won’t let me watch a program even though it’s not rated as violent. Maybe the movie was given an NR (Not Rated) status. After you block movie ratings, you must set NR to View Separately in order to view movies with an NR rating. What else can I do? If you’ve been through the Troubleshooting section and nothing has fixed your problem, try rebooting your TV. Note that after a reboot, you may need to run your TV through the setup process again. To do a reboot, unplug the power cord from the wall outlet or power strip. Keep your TV unplugged for about 5 minutes. Then plug in the TV and turn it on. See if the problem is fixed. If the problem remains, then please visit www.tclusa.com for updated FAQs or contact TCL Customer Support at the support number provided in your Warranty under “How To Get Service.” Care and Cleaning Caution: Turn OFF your TV before cleaning. You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help assure adequate ventilation. IMPORTANT: Never use strong cleaning agents, such as ammonia-based cleaners, or abrasive powder. These types of cleaners will damage the TV. The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary, you may use a cloth dampened with warm water. While cleaning, do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, never place drinks or vases with water on top of the TV. This could increase the risk of fire, shock hazard or damage to the TV. 26 Other Information Television Specifications Broadcasting system US System NTSC-M ATSC standard (8VSB), QAM Receiving Channels VHF2-13 UHF14-69 CATV 14-36 (A)-(W) 37-59 (AA)-(WW) 60-85 (AAA)-(ZZZ) 86-94 (86)-(94)95-99 (A-5)-(A-1) 100-135 (100)-(135) 01 (4A) Tuner type Frequency synthesized Screen refresh rate 60Hz 27 TTE Technology, Inc. (“TTE”) Limited Warranty All LCD/LED Models EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER, AND AS DESCRIBED BELOW TTE EXPRESSLY DISCLAIMS, ALL ACTUAL AND IMPLIED WARRANTIES WITH RESPECT TO ANY PRODUCT USED FOR INSTITUTIONAL OR OTHER COMMERCIAL PURPOSES (INCLUDING BUT NOT LIMITED TO RENTAL PURPOSES). What your warranty covers: Defects in materials or workmanship to the original owner of this TCL product when purchased from an Authorized Dealer of TCL brand products and packaged with this warranty statement. New LCD/LED Televisions For how long after your purchase: • Two (2) years from date of purchase for parts. • Two (2) years from date of purchase for labor. What we will do: • At TTE’s discretion, pay an Authorized TCL Service Center for both labor charges and parts to repair your television, or replace your television with a new or refurbished/remanufactured unit. See “How to get service”. How to get service: • Call 1-877-300-8837. Please have your unit’s date of purchase, place of purchase and model/ serial number ready. The model/serial number information can be found on the back of your unit. • A representative will troubleshoot your problem over the phone. If it is determined that your unit requires service, the service location will be at the sole discretion of TTE based upon the TTE Limited Warranty statement. • At the sole discretion of TTE, television screen sizes 32” and smaller will either be repaired at an Authorized TCL Service Center or directly exchanged for a new or refurbished/remanufactured unit. At the sole discretion of TTE, television screen sizes 33” through 55” will either be repaired at an Authorized TCL Service Center or repaired in-home. If repaired at an Authorized TCL Service Center, TTE is not responsible for transportation costs to the Authorized TCL Service Center. However, TTE will pay for return shipping. TTE will provide instructions for packaging and shipping the unit. Proof of purchase in the form of a bill of sale or receipted invoice from an Authorized Dealer which is evidence that the product is within the warranty period must be presented to obtain warranty service. What your warranty does not cover: • Customer instruction. (Your Owner’s Manual describes how to install, adjust, and operate your unit. Any additional information should be obtained from your Authorized Dealer.) • Installation and related adjustments. • Damage resulting from non-approved installation methods. • Signal reception problems not caused by your unit. • Damage from misuse or neglect. • Batteries. • A television that has been modified or incorporated into other products or is used for institutional or other commercial purposes (including but not limited to rental purposes). • A unit purchased or serviced outside the USA. • A unit sold as is or with all faults • Acts of nature, such as but not limited to lightning damage. • Special, incidental or consequential damages. 28 Product Registration: Please register your TCL purchase on-line at www.tclusa.com. It will make it easier to contact you should it ever be necessary. Registration is not required for warranty coverage. Limitation of Warranty: • THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT. NO VERBAL OR WRITTEN INFORMATION GIVEN BY TTE TECHNOLOGY, INC., ITS AGENTS OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE OR MODIFY THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. TTE TECHNOLOGY, INC. SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY AND WARRANTY PERIOD SET FORTH ABOVE. How State Law relates to this warranty: • Some states do not allow the exclusion nor limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. • This warranty gives you specific legal rights, and you also may have other rights that vary from state to state. If you purchased your unit outside the United States or seek warranty coverage outside the United States: This warranty does not apply. Contact your dealer for warranty information. Service calls which do not involve defective materials or workmanship are not covered by this warranty. Costs of such service calls are the sole responsibility of the purchaser. 29 ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency (EPA). ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are registered trademarks of Dolby Laboratories. This product contains technology subject to certain intellectual property rights of Microsof technology outside of this product is prohibited without the appropriate license(s) from Microsoft. Content owners use Microsoft PlayReadyTM content acess technology to protect their intellectual property, including copyrighted content. This device uses PlayReady technology to acess PlayReady protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions on content usage, content owners may require Microsoft to revoke the device’s ability to consume PlayReadyprotedcted content. Revocation should not affect unprotected content or content protected by other content access technologies. Content owners may require you to upgrade PlayReady to acess theire content. If you decline an upgrade, you will not be able to access that require the upgrade. FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Please do not send any products to the California address listed in this manual or on the carton. This will only add delays in service for your product. TTE Technology, Inc. 1255 Graphite Drive Corona, CA 92881 ©2011 TTE Technology, Inc. TCL and associated marks are trademarks of TCL S.A.used under license to TTE Corporation. Printed in China Part No.: 72-MT25NA-X001A
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Instance ID : uuid:a67ec17c-6e04-4c61-a48d-c6293eb764a0 Document ID : adobe:docid:indd:c395a83d-b65c-11e0-aae6-8a83b4a0ec54 Rendition Class : proof:pdf Derived From Instance ID : 3de573c7-b443-11e0-933e-d60e9fae878f Derived From Document ID : adobe:docid:indd:c571ad6f-b11d-11e0-a5eb-d6a1049d819a Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:683563A5E1B8E011AE1CB8F36C3E2ADB, uuid:6481954916E9DE11B6AFDCDBD7A8D66A, uuid:6481954916E9DE11B6AFDCDBD7A8D66A, uuid:3780C1A004ACDE119B889353B1110B94, uuid:3780C1A004ACDE119B889353B1110B94, uuid:642D817800ACDE119499EEE04F9CD5F6, uuid:CFCE7E4EFFFBDE1184B884F9AF1AC22C, uuid:2095683104ACDE119B889353B1110B94, uuid:9DA823D802ACDE119499EEE04F9CD5F6, uuid:F44DE6D19A3DE01189ACB25F4C3EB57B, uuid:8800ecbd-1f49-460c-9024-6eb1d4e5f4df, uuid:1C95683104ACDE119B889353B1110B94, uuid:351fd96b-1f4b-4425-a897-0e7a03b6bb35, uuid:44f22bbb-7c75-4f77-8dae-9e83fbba16e3, uuid:edb7ff61-1396-46c7-8991-38832bd2e80b, uuid:e9699c45-a21f-48eb-9a51-26aaa13121c0, uuid:1C95683104ACDE119B889353B1110B94, uuid:70a2e6cb-8d4f-4541-bf4f-de4d4f578471, uuid:1bc006c5-2ae1-42e3-bf26-bec4be734c7a, uuid:52bbe30d-4832-472d-b34c-e2295dc97a26, uuid:abc61715-c098-447d-8735-914dd52dec72, uuid:9dc11336-c776-4012-bcc1-5b293b60aec3, uuid:1C95683104ACDE119B889353B1110B94, uuid:1C95683104ACDE119B889353B1110B94, uuid:ee0ff913-ba0f-4d22-9662-360b42cc027b, uuid:C5456590AAD5DE119799FE8E5B3EC0CB, uuid:f55f19a8-0bc0-4bd7-9b60-d77c8101931f, uuid:f3f4858b-71cc-4b68-a8dc-403d6dac9ac4, uuid:77E600AFA8D5DE119D21DC2F51E58190, uuid:77E600AFA8D5DE119D21DC2F51E58190, uuid:77E600AFA8D5DE119D21DC2F51E58190, uuid:2295683104ACDE119B889353B1110B94 Manifest Reference Document ID : uuid:95B962BF18B8E011BF2CA21F22977B1D, uuid:6381954916E9DE11B6AFDCDBD7A8D66A, uuid:6381954916E9DE11B6AFDCDBD7A8D66A, uuid:3680C1A004ACDE119B889353B1110B94, uuid:3680C1A004ACDE119B889353B1110B94, uuid:632D817800ACDE119499EEE04F9CD5F6, uuid:CECE7E4EFFFBDE1184B884F9AF1AC22C, uuid:1F95683104ACDE119B889353B1110B94, uuid:99A823D802ACDE119499EEE04F9CD5F6, uuid:F34DE6D19A3DE01189ACB25F4C3EB57B, uuid:b4013bcd-7bc7-41ed-b394-8a8cd1bc9ba5, uuid:1B95683104ACDE119B889353B1110B94, uuid:937d9749-272e-407d-af89-e441a443f47c, uuid:85f2b956-1d38-460a-bd97-ec8b4e3b6d61, uuid:52323b4e-2f27-4a41-b3f2-8342dc58893c, uuid:2b6d0063-3c9a-4977-a8b6-37e8760f002c, uuid:1B95683104ACDE119B889353B1110B94, uuid:736b18ad-0660-4db3-ab0e-2ada515da91b, uuid:3f74ca75-cb3b-4d70-a517-97858709c2f0, uuid:faa07435-70bb-48f8-92ef-986d88126c31, uuid:708bea17-2686-443f-8e92-9f5ffe8e714a, uuid:e4f6e589-24b0-48e7-a2df-401eab1b8cd3, uuid:1B95683104ACDE119B889353B1110B94, uuid:1B95683104ACDE119B889353B1110B94, uuid:e4727d09-f2a7-467b-9ce7-4f0bb5f5b4b2, uuid:6EE600AFA8D5DE119D21DC2F51E58190, uuid:18e89618-cdc3-41ba-ac6b-e3a6ab289992, uuid:1f34555f-7854-4b63-95b8-2734e27e285e, uuid:70E600AFA8D5DE119D21DC2F51E58190, uuid:70E600AFA8D5DE119D21DC2F51E58190, uuid:70E600AFA8D5DE119D21DC2F51E58190, uuid:2195683104ACDE119B889353B1110B94 Create Date : 2011:07:28 14:24:18+08:00 Modify Date : 2011:07:28 14:26:46+08:00 Metadata Date : 2011:07:28 14:26:46+08:00 Creator Tool : Adobe InDesign CS3 (5.0) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 6538 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 30 Creator : Adobe InDesign CS3 (5.0)EXIF Metadata provided by EXIF.tools