TTE Technology WF21 WIFI Module User Manual WF21RL2510A Usermanual
TTE Technology, Inc. WIFI Module WF21RL2510A Usermanual
Users Manual
PRODUCTS USERMANUAL WF21RL2510A WIFI Module IEEE 802.11b/g/n 2T/2R Model Number: WF21RL2510A Product Description TCL WF21RL2510A is a high-gain and low power consumption wifi module . It fully complies with IEEE 802.11n and IEEE 802.11b/g feature rich wireless connectivity at high standards,delivers reliable,cost-effective,throughput from an extended distance.When 5V, USB bus and GND were connected,This module is working. Product Features ◆ Complies with IEEE 802.11g; 802.11b; 802.11n standard for 2.4GHz Wireless LAN. ◆TWO Transmit and TWO Receive path(2T2R) ◆Supports Ad-Hoc/Infrastructure modes ◆ Works with all existing network nfrastructure. ◆Capable of up to 128-Bit WEP Encryption. ◆Freedom to roam while staying connected. ◆ UP to 300 Mbps High-Speed Transfer Rate in 802.11n mode of operation. ◆ Operating Systems:Windows XP 32/64,2000,Windows 7,Vista 32/64,Linux,Macintosh ◆ Low power consumption. ◆ Easy to install and configure. Product Specification Model WF21RL2510A Product Name WIFI module Standard 802.11b/g/n Interface 4pin Interface Data Transmit Power 1,2,5.5,6,11,12,18,22,24,30,36,48,54,60 ,90,120 and maximum of 300Mbps QPSK , BPSK , CCK(802.11b) QPSK , BPSK , 16QAM ,64QAM with OFDM (802.11g) BPSK , QPSK , 16QAM ,64QAM with OFDM(802.11n) 802.11b/g/n(HT20) CH 1~CH11 for FCC 802.11n(HT40) < 18dBm Operation Mode Ad hoc, Infrastructure Operation Range Up to 300 meters in open space OS Support Windows XP 32/64,2000,Windows 7,Vista 32/64,Linux,Macintosh Security WEP, TKIP, AES, WPA, WPA2 Operating Voltage 5V±10% Operating Temperature -10 ~ 70°C ambient temperature Storage Temperature -55 ~ 125°C ambient temperature Humidity 5 to 90 % maximum (non-condensing) Transfer Rate Modulation Method Frequency Band PAGE 1 OF Version 1.0 PRODUCTS USERMANUAL WF21RL2510A FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. The module must be installed in TV set. In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Regulation information (1) This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. (2) This compliance to FCC radiation exposure limits for an uncontrolled environment, and minimum of 20cm separation between antenna and body. PAGE 2 OF Version 1.0 PRODUCTS USERMANUAL WF21RL2510A ⑶ ⑷ The end product must carry a label stating “Contains TX FCC ID: W8UWF21”. PAGE 3 OF Version 1.0
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2013:05:30 15:01:11+08:00 Create Date : 2013:05:30 15:01:11+08:00 Format : application/pdf Title : Microsoft Word - WF21RL2510A Usermanual.doc Creator : Administrator Document ID : uuid:d265a72f-1a16-41cf-bd5e-bf18767a9e27 Instance ID : uuid:a13de82f-9ecf-4cec-9d60-614a3e55136a Page Count : 3 Author : AdministratorEXIF Metadata provided by EXIF.tools