TYT ELECTRONICS MD380V DMR User Manual ID 123

Download:
Mirror Download [FCC.gov]
Document ID	2761007
Application ID	RaaF87ClLAOA8KIIzFAoMA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	500.69kB (6258590 bits)
Date Submitted	2015-09-24 00:00:00
Date Available	2015-09-24 00:00:00
Creation Date	2015-09-17 18:12:55
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2015-09-24 14:38:33
Document Title	ID--User Manual123.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	SZ084

V
136 174
V
136-174
Rated output power
1W /5W
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTICE: This radio is intended for use in occupational/controlled conditions,
where users have full knowledge of their exposure and can exercise control over
their exposure to meet FCC limits. This radio device is NOT authorized for
general population, consumer, or any other use.
This 2-way radio uses electromagnetic energy in the radio frequency (RF) spectrum to
provide communications between two or more users over a distance. It uses radio
frequency (RF) energy or radio waves to send and receive calls. RF energy is one form
of electromagnetic energy. Other forms include, but are not limited to, electric power,
sunlight and x-rays. RF energy, however, should not be confused with these other forms
of electromagnetic energy, which when used improperly can cause biological damage.
Very high levels of x-rays, for example, can damage tissues and genetic material.
TYT ELECTRONICS CO.,LTD 2-way radio complies with the following RF energy
exposure standards and guidelines:
•
•
•
United States Federal Communications Commission, Code of Federal Regulations; 47 CFR
§§ 1.1307, 1.1310, 2.1091 and 2.1093
American National Standards Institute (ANSI) / Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
To control your exposure and ensure compliance with the occupational/controlled
environment exposure limits always adhere to the following procedures.
Guidelines:
•
Do not remove the RF Exposure Label from the device.
•
User awareness instructions should accompany device when transferred to other
users.
•
Do not use this device if the operational requirements described herein are not
met.
Operating Instructions:
•
50
Transmit no more than the rated duty factor of ___%
of the time. To transmit
(talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT
50
button. Transmitting __%
of the time, or less, is important because this radio
generates measurable RF energy exposure only when transmitting (in terms of
measuring for standards compliance).
•
Hold the radio in a vertical position in front of face with the microphone (and the
other parts of the radio, including the antenna) at least one inch (2.5 cm) away
from the nose. Keeping the radio at the proper distance is important because RF
exposures decrease with distance from the antenna. Antenna should be kept
away from eyes.
•
When worn on the body, always place the radio in a TYT ELECTRONICS CO.,LTD
approved clip, holder, holster, case, or body harness for this product. Using
approved body-worn accessories is important because the use of
TYT ELECTRONICS CO.,LTD or other manufacturers non-approved accessories
may result in exposure levels, which exceed the FCC’s occupational/controlled
environment RF exposure limits.
•
If you are not using a body-worn accessory and are not using the radio in the
intended use position in front of the face, then ensure the antenna and the radio
are kept at least 2.5 cm (one inch) from the body when transmitting. Keeping the
radio at the proper distance is important because RF exposures decrease with
increasing distance from the antenna.
Use only TYT ELECTRONICS CO.,LTD approved supplied or replacement antennas,
batteries, and accessories. Use of non-manufacturer-name approved antennas,
batteries, and accessories may exceed the FCC RF exposure guidelines.
•

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Author                          : SZ084
Create Date                     : 2015:09:17 18:12:55+08:00
Modify Date                     : 2015:09:24 14:38:33+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2015:09:24 14:38:33+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : ID--User Manual123.pdf
Creator                         : SZ084
Document ID                     : uuid:5b0eac7a-2dd8-4fd2-adfa-fab0f25fdecb
Instance ID                     : uuid:1a5efc43-7157-4139-b431-198e4410b02e
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Page Count                      : 50

EXIF Metadata provided by EXIF.tools