TYT ELECTRONICS TH-UVF9 Two-way Radio User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	2119670
Application ID	92P/aim7hCXpxOBd/3zENg==
Document Description	User Manual 3
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	168.67kB (2108365 bits)
Date Submitted	2013-11-15 00:00:00
Date Available	2013-11-15 00:00:00
Creation Date	2012-08-28 16:13:26
Document Lastmod	2012-10-10 11:09:10
Document Title	User Manual 3

SAFETYTRAINING INFORMATION
Your TYT ELECTRONICS CO.,LTD radio generates RF electromagnetic energy during transmit
mode. This radio is designed for and classified as “Occupational Use Only”, meaning it must
be used only during the course of employment by individuals aware of the hazards, and the
ways to minimize such hazards. This radio is NOT intended for use by the “General Population”
in an uncontrolled environment.
This radio has been tested and complies with the FCC RF exposure limits for “Occupational Use Only”. In addition,
your TYT ELECTRONICS CO.,LTD radio complies with the following Standards and Guidelines with regard to RF
energy and electromagnetic energy levels and evaluation of such levels for exposure to humans:
FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to
Radio Frequency Electromagnetic Fields.
American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure
to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz.
American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially
Hazardous Electromagnetic Fields– RF and Microwave.
The following accessories are authorized for use with this product. Use of accessories other than those (listed in the
instruction) specified may result in RF exposure levels exceed the FCC requirements for wireless RF exposure.
To ensure that your expose to RF electromagnetic energy is within the FCC allowable limits for
occupational use, always adhere to the following guidelines:
DO NOT operate the radio without a proper antenna attached, as this may damaged the radio and may also cause you
to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or
antenna specifically authorized by the manufacturer for use with this radio.
DO NOT transmits for more than 50% of total radio use time (“50%duty cycle”). Transmitting more than 50% of the time
can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX indicator”
lights red. You can cause the radio to transmit by pressing the “PTT” switch.
ALWAYS keep the antenna at least 2.5 cm (1 inch) away from the body when transmitting and only use the HYT belt-clip
which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance
requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna
at least 5 cm (2 inches) from your mouth, and slightly off to one side.
The information listed above provides the user with the information needed to make him or her aware of RF
exposure, and what to do to as‐sure that this radio operates with the FCC RF exposure limits of this radio.
Electromagnetic Interference/Compatibility
During transmissions, your TYT ELECTRONICS CO.,LTD radio generates RF energy that can possibly cause
interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are
posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as
hospitals, aircraft, and blasting sites.
Occupational/Controlled Use
The radio transmitter is used in situations in which persons are exposed as consequence of their employment
provided those persons are fully aware of the potential for exposure and can exercise control over their exposure.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Modify Date                     : 2012:10:10 11:09:10+08:00
Create Date                     : 2012:08:28 16:13:26+08:00
Metadata Date                   : 2012:10:10 11:09:10+08:00
Format                          : application/pdf
Document ID                     : uuid:4db62295-86d0-4336-969e-d14ea4b7b728
Instance ID                     : uuid:a20c14d3-266b-4fb9-876c-1aedc7abed27
Has XFA                         : No
Page Count                      : 6

EXIF Metadata provided by EXIF.tools