Tagsys LIBREADERLP101 RFID Tag Reader User Manual L SA4 SHD User s Guide V1 1

Tagsys S.A. RFID Tag Reader L SA4 SHD User s Guide V1 1

Contents

Manual L-SA4 SHD Antenna

L-SA4 SHD Antenna
User's Guide
Revision 1.1
August 2010
L-SA4 SHD Antenna User's Guide
2/23 Revision 1.1 August 2010
Publishing Information
Disclaimer and Limitation of Liability
All information herein is either public information or is the property of and owned solely by TAGSYS who shall have and
keep the sole right to file patent applications or any other kind of intellectual property protection in connection with such
information.
Nothing herein shall be construed as implying or granting to you any rights, by license, grant or otherwise, under any
intellectual and/or industrial property rights of or concerning any of TAGSYS’ information.
This document can be used for informational, non-commercial, internal and personal use only provided that:
• the copyright notice below, the confidentiality and proprietary legend and this full warning notice appear in all copies.
• this document shall not be posted on any network computer or broadcast in any media and no modification of any
part of this document shall be made.
Use for any other purpose is expressly prohibited and may result in severe civil and criminal liabilities.
The information contained in this document is provided “AS IS” without any warranty of any kind. Unless otherwise
expressly agreed in writing, TAGSYS makes no warranty as to the value or accuracy of information contained herein.
The document could include technical inaccuracies or typographical errors. Changes are periodically added to the
information herein. Furthermore, TAGSYS reserves the right to make any change or improvement in the specifications
data, information, and the like described herein, at any time.
Therefore TAGSYS assumes no liability and is not responsible for customer applications or product or software that
include TAGSYS products.
TAGSYS HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE INFORMATION
CONTAINED HEREIN, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT SHALL TAGSYS BE LIABLE, WHETHER
IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OR ANY
DAMAGES WHATSOEVER INCLUDING BUT NOT LIMITED TO DAMAGES RESULTING FROM LOSS OF USE,
DATA, PROFITS, REVENUES, OR CUSTOMERS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
PERFORMANCE OF INFORMATION CONTAINED IN THIS DOCUMENT.
TAGSYS does not and shall not warrant that this product/system/equipment will be resistant to all possible attacks, and
shall not incur, and disclaims, any liability in this respect. Even if each product is compliant with current security
standards in force on the date of their design, security mechanisms' resistance necessarily evolves according to the
state-of-the-art in security and notably under the emergence of new attacks. Under no circumstances shall TAGSYS be
held liable for any third party actions, and in particular in case of any successful attack against systems or equipment
incorporating TAGSYS products.
TAGSYS disclaims any liability with respect to security for direct, indirect, incidental or consequential damages that result
from any use of its products. It is further stressed that independent testing and verification by the person using the
product is particularly encouraged, especially in any application in which defective, incorrect, or insecure functioning
could result in damage to persons or property, denial of service, or loss of privacy.
© Copyright TAGSYS 2000-2010
MS-DOS© and Windows© are registered trademarks of Microsoft Corporation.
Printed in France.
TAGSYS – 785 Voie Antiope, Athélia III, 13600 La Ciotat, France.
Tel: +33 (0) 4.42.18.89.00 / Fax: +33 (0) 4.42.18.89.01
Document Reference: DOC13754A1
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 3/23
Read This First
Welcome to the TAGSYS RFID System. This User's Guide is designed to help you get up and
running quickly using this high-quality Radio Frequency Identification (RFID) system. It describes
all you need to know about how to install and use the TAGSYS system and its associated
applications.
It provides a step-by-step guide for the following procedures:
• Installation of the L-SA4 SHD Antenna
• Configuring the product for use within your system
This guide is designed for all TAGSYS partners and for TAGSYS Expert Network customers
implementing a low-cost and high-performance RFID solution.
This document does not assume any previous knowledge of Radio Frequency Identification (RFID)
technology.
Conventions
Symbol Meaning
CAUTION: A note that advises users that a specific action could result in the loss of data or
damage the hardware.
WARNING: A note that advises users that a specific action may result in physical harm.
A note that provides additional information that helps the user performs a task or obtains the
best performance from the product.
If you need assistance
Please contact your nearest TAGSYS sales representative or the TAGSYS welcome desk at:
Telephone: +33 (0) 4 42 18 89 00
Fax: +33 (0) 4 42 18 89 01
E-Mail: info@tagsysrfid.com
Website: http://www.tagsysrfid.com
Contact for Comments
We welcome your feedback to help us provide high quality documentation.
For technical comments, please contact our welcome desk:
Telephone: +33 (0) 4 42 18 89 00
Fax: +33 (0) 4 42 18 89 01
E-Mail: info@tagsysrfid.com
Please remember to quote the Document Reference Number DOC13754A1, your job title and your
company.
L-SA4 SHD Antenna User's Guide
4/23 Revision 1.1 August 2010
Quality Issues
TAGSYS implements stringent quality controls at all stages of its manufacturing process. However,
should you find a defect with this product, please notify your TAGSYS Quality Service
representative using the dedicated Product Return Form.
Telephone: +33 (0) 4 42 18 89 36
Fax: +33 (0) 4 42 18 89 01
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 5/23
Table of Contents
PUBLISHING INFORMATION __________________________________________________________ 2
D
ISCLAIMER AND
L
IMITATION OF
L
IABILITY
__________________________________________________ 2
READ THIS FIRST ____________________________________________________________________ 3
C
ONVENTIONS
_________________________________________________________________________ 3
I
F YOU NEED ASSISTANCE
________________________________________________________________ 3
C
ONTACT FOR
C
OMMENTS
_______________________________________________________________ 3
Q
UALITY
I
SSUES
_______________________________________________________________________ 4
1
FOR YOUR SAFETY _______________________________________________________________ 7
1.1
G
ENERAL
U
SE
____________________________________________________________________ 7
1.2
C
ARE AND
M
AINTENANCE
___________________________________________________________ 7
1.3
I
MPORTANT
S
AFETY
I
NFORMATION
____________________________________________________ 7
1.3.1
O
PERATING
E
NVIRONMENT
________________________________________________________ 7
2
CERTIFICATION___________________________________________________________________ 9
2.1
O
CCUPATIONAL
H
EALTH AND
S
AFETY
N
OTICES
_________________________________________ 9
2.2
R
EGULATORY
N
OTICES
_____________________________________________________________ 9
2.2.1
I
N
E
UROPE
(CE
AND
RTTE
D
IRECTIVES
)_____________________________________________ 9
2.2.2
I
N
USA
(FCC
D
IRECTIVE
)__________________________________________________________ 9
2.2.3
I
N
C
ANADA
_____________________________________________________________________ 11
2.3
R
O
HS
AND
WEEE
D
IRECTIVES
_____________________________________________________ 11
2.3.1
R
O
HS
(R
ESTRICTION OF THE USES OF CERTAIN
H
AZARDOUS
S
UBSTANCES
)_______________ 11
2.3.2
WEEE
(W
ASTE
E
LECTRICAL AND
E
LECTRONIC
E
QUIPMENT
)____________________________ 11
3
OVERVIEW ______________________________________________________________________ 13
3.1
D
ELIVERY
K
IT
____________________________________________________________________ 14
4
INSTALLATION __________________________________________________________________ 15
4.1
S
TANDARD
I
NSTALLATION
__________________________________________________________ 15
4.2
D
ESKTOP
C
ONFIGURATION
_________________________________________________________ 15
4.3
A
CTIVE
A
REA IN
D
ESKTOP
C
ONFIGURATION
___________________________________________ 15
4.4
S
PECIFIC
I
NSTALLATION USING THE
M
OUNTING
K
IT
_____________________________________ 16
5
OPERATION _____________________________________________________________________ 17
6
MAINTENANCE __________________________________________________________________ 18
6.1
S
ERVICING THE
L-SA4
SHD
A
NTENNA
_______________________________________________ 18
6.2
A
NTENNA
T
UNING
________________________________________________________________ 18
L-SA4 SHD Antenna User's Guide
6/23 Revision 1.1 August 2010
7
TECHNICAL DATA _______________________________________________________________ 20
7.1
M
ECHANICAL
C
HARACTERISTICS
____________________________________________________ 20
7.2
E
LECTRICAL
C
HARACTERISTICS
_____________________________________________________ 20
8
WARRANTY CONDITIONS ________________________________________________________ 21
8.1
W
ARRANTY
______________________________________________________________________ 21
8.1.1
W
ARRANTY
E
XCLUSIONS
_________________________________________________________ 21
8.1.2
G
ENERAL
P
ROVISIONS
___________________________________________________________ 22
8.1.3
H
OW TO
R
ETURN
D
EFECTIVE
P
RODUCTS
____________________________________________ 22
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 7/23
1 For Your Safety
1.1 General Use
The L-SA4 SHD Antenna is designed to be rugged and reliable and to provide years of trouble-free
service. Please observe the following general tips:
• Take care not to scratch the device. Keep the device clean. When working with the device,
use only TAGSYS-approved accessories.
• This device is not waterproof and should not be exposed to rain or moisture. Under extreme
conditions, water may enter the circuitry.
• Take care not to drop the device or subject it to any strong impact.
• Protect the device from extreme temperatures.
• Do not store or use the device in any location that is extremely dusty, damp, or wet.
• Use a soft, damp cloth to clean the device. If the surface of the device becomes soiled,
clean it with a soft cloth moistened with a diluted window-cleaning solution.
1.2 Care and Maintenance
This device is a product of superior design and should be handled with care. The suggestions
below will further increase the lifetime of this device.
• Keep the device and all parts and accessories out of the reach of small children.
• Keep the device dry. Precipitation, humidity and liquids contain minerals that will corrode
electronic circuits.
• Do not use or store the device in dusty, dirty areas. Its moving parts can be damaged.
• Do not store in hot areas. High temperatures can shorten the life of electronic devices,
damage batteries and warp or melt certain plastics.
• Do not store in cold areas. When the device warms up (to its normal temperature), moisture
can form inside the device, which may damage electronic circuit boards.
• Do not attempt to open the device. Non-professional handling of the device may damage it.
• Handle the device with care. Shocks may break internal circuit boards.
• Do not clean the device with harsh chemicals, cleaning solvents or strong detergents.
Gently wipe the device with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the device. Paint may clog the device’s moving parts and prevent proper
operation.
1.3 Important Safety Information
1.3.1 Operating Environment
Follow all special regulations that are applicable in any area and always switch off the device
whenever its use is prohibited, or when it may cause interference or danger.
L-SA4 SHD Antenna User's Guide
8/23 Revision 1.1 August 2010
When connecting the device or any accessory to another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible products.
As with all RF equipment, users are advised that the equipment should only be used in its normal
operating position.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 9/23
2 Certification
2.1 Occupational Health and Safety Notices
TAGSYS Products have been designed not to exceed the limits given in the European Standard
EN 50364 “Limitation of human exposure to electromagnetic fields from devices used in Electronic
Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications” in
conjunction with the European Standard EN 50357 describing how to evaluate the exposure level.
It is the responsibility of the TAGSYS Partner to install the L-SA4 SHD Antenna as described in
TAGSYS Product Manuals or TAGSYS Documentation and with the appropriate antennas.
Modification of any TAGSYS System is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to safety norm and will void
the TAGSYS warranty.
An RF field’s survey has been carried out on all the System components, in accordance with
AS/NZS 2771.1: Radio Frequency Radiation, Part 1. According to this standard the maximum
allowable RF exposure levels (non-occupational) at 3 kHz to 300 GHz are 200 µW/cm2.
2.2 Regulatory Notices
An RFID system typically composed of an RF emission device such as the L-SA4 SHD Antenna is
subject to national regulations that may differ by country.
One important item to consider is the maximum permissible magnetic field intensity at a distance of
10 meters from the antenna that must not exceed 42 dBµA/m in Europe and 38 dBµA/m in US.
The L-SA4 SHD Antenna meets these limits.
2.2.1 In Europe (CE and RTTE Directives)
The L-SA4 SHD Antenna complies (CE Declaration of Conformity granted) with the European EMC
directive.
The L-SA4 SHD Antenna complies with the requirements of the Telecommunication Terminal
Equipment Act (FTEG) and the RTTE Directive 1995/5/EC.
Any modification of the L-SA4 SHD Antenna is prohibited without the written consent of TAGSYS.
Unauthorized modifications may void the conformity of the equipment to CE and RTTE Directives
and will void the TAGSYS warranty.
2.2.2 In USA (FCC Directive)
The L-SA4 SHD Antenna has been designed to comply with Part 15 of the FCC Rules when used
with L-P101 and Medio P200L readers. The certified base configuration is L-SA4 SHD Antenna
It is the responsibility of the TAGSYS Partner to install the L-SA4 SHD Antenna as described
in this User's Guide or in TAGSYS Documentation.
If a L-SA4 SHD Antenna is further integrated in a different product, it is the responsibility of
the manufacturer of this complementary product to obtain the required approvals for this
product.
L-SA4 SHD Antenna User's Guide
10/23 Revision 1.1 August 2010
connected to the L-P101 or Medio P200L readers which has been successfully tested with Part 15
of the FCC rules (FCC ID Number: QHKLIBREADERLP101).
L-P101 and Medio P200L
WARNING TO USERS IN THE UNITED STATES
FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIO
INTERFERENCE STATEMENT 47 CFR Section 15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and if not installed and used in accordance with the instructions
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
▪ Reorient or relocate the receiving antenna.
▪ Increase the separation between the equipment and receiver.
▪ Connect the equipment into an outlet on a circuit different to that to which the receiver is
connected.
▪ Consult the dealer or an experienced radio/TV technician for help.
NO UNAUTHORIZED MODIFICATIONS
47 CFR Section 15.21
CAUTION: This equipment may not be modified, altered, or changed in any way without signed
written permission from TAGSYS SAS. Unauthorized modification may void the equipment
authorization from the FCC and will void the TAGSYS warranty.
ANTENNA REQUIREMENT
47 CFR Section 15.203
CAUTION: This equipment must be professionally installed. The installer shall be responsible for
ensuring that the proper antenna is employed so that the limits in this part are not exceeded. Non-
professional installation or installation of the equipment with an improper antenna may void the
equipment authorization from the FCC and will void the TAGSYS warranty.
The L-P101 and Medio P200L have been designed to comply with FCC 47 CFR Part 15 Rules to
apply with the LW1, Aero-LI, L-SA3, L-SA4 and L-SA4 SHD antennas.
Operation is subject to the following two conditions: (1) The system devices may not cause harmful
interference, and (2) The system devices must accept any interference received, including
interference that may cause undesired operation.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 11/23
2.2.3 In Canada
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
2.3 RoHS and WEEE Directives
2.3.1 RoHS (Restriction of the uses of certain Hazardous Substances)
TAGSYS certifies that the L-SA4 SHD Antenna is compliant with the European Directive
2002/95/EC for the restriction in Electric and Electronic Equipments (RoHS) of the use of the
following hazardous substances:
• Lead
• Mercury
• Cadmium
• Hexavalent Chromium
• Polybrominated biphenyl flame retardants
• Polybrominated diphenyl ether flame retardants
This declaration is based on information provided by our suppliers and subcontractors.
2.3.2 WEEE (Waste Electrical and Electronic Equipment)
CAUTION: When using L-SA4 SHD with L-P101 or Medio P200L readers, one must be sure a
ferrite is placed close to power supply jack connector (2 turns as shown below). The ferrite is
provided with LSA-4 SHD antenna.
L-SA4 SHD Antenna User's Guide
12/23 Revision 1.1 August 2010
This product bears the selective sorting symbol for waste
electrical and electronic equipment (WEEE)
This means that this product must be handled pursuant to
European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment.
For further information, please contact your local or
regional authorities.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 13/23
3 Overview
The L-SA4 SHD Antenna allows multiple books or CDs/DVDs transactions (stack of books, stack
of CDs/DVDs)
The antenna provides a large area of detection (Figure 1). The L-SA4 SHD Antenna is optimized
for use with the TAGSYS L-P101, Medio P200L and L-L100 (please see Caution) readers and is
recommended for check in/out operations.
Due to its specific design, the L-SA4 SHD Antenna can be safely used in proximity with other
TAGSYS RFID products. It will work also, if properly installed; in metallic-type environments (see
Section 4, "Installation" for more details). In this case, performance may be reduced.
The antenna is provided with rubber base pads for installation in a standard desktop configuration.
Although this antenna has been specifically designed for library applications, it can also be used
for any application requiring a desktop station which has a good immunity to its environment.
The antenna has been factory calibrated to an impedance of 50 Ω which offers optimal
performance when the antenna is installed on the surface of a desk or table.
It may be necessary to retune the antenna once installed if the environment is highly metallic or if
the antenna is installed underneath the table or desk. For more information about tuning antennas,
refer to Section 6.2, "Antenna Tuning".
Optimal performance is achieved when the smart labels to be read are placed parallel to the
antenna surface and centered on the antenna surface.
Figure 1: L-SA4 SHD Antenna
L-L100 library reader is only certified in Europe.
L-SA4 SHD Antenna User's Guide
14/23 Revision 1.1 August 2010
3.1 Delivery Kit
The items listed in Table 1 are included in the delivery kit.
Table 1: Contents of the Delivery Kit
Quantity Description
1 L-SA4 SHD Antenna with one 3m-long coaxial cable and fitted with 6 ferrite beads
1 Mounting Kit including 4 brackets and associated screws and nuts
1 Cable mounting ferrite for use with L-P101 or Medio P200L
1 CD-ROM including user documentation, product software and example application
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 15/23
4 Installation
4.1 Standard Installation
The recommended installation for the L-SA4 SHD Antenna is the desktop configuration. Its thin
shape is ergonomically designed for discreet use at the circulation desk for multiple check-in/out
operations.
The L-SA4 SHD Antenna is designed for indoor use.
4.2 Desktop Configuration
The antenna is specially designed to operate:
• On wooden, synthetic or metallic desks (or those including metallic parts),
• In close proximity to other antennas.
Place the antenna on the desk and connect the BNC connector to the RF output of the L-P101,
Medio P200L or L-L100 readers.
Figure 2: Standard Desktop Installation
Active face
4.3 Active Area in Desktop Configuration
Due to the magnetic field radiated by the antenna, a restricted area must be preserved around the
antenna to prevent unwanted reading or programming tags during check in and check out
operations.
Items must be kept out from the limited active area as shown in Figure 3.
CAUTION: Always ensure that the reader unit is switched off before connecting or
disconnecting the antenna. Also, the antennas MUST be connected to the reader unit
before it is switched on.
For optimum performance, always ensure that all metallic or conductive parts are
located under the antenna.
Do not shorten or extend the supplied cable as this may affect performance.
Do not place the antenna cable close to other cables, especially power cables.
L-SA4 SHD Antenna User's Guide
16/23 Revision 1.1 August 2010
Figure 3: Active Area in Standard Configuration
50 mm (2 in.)
50 mm (2 in.)
L-SA4
263 mm (10.5 in.)
288 mm (11.5 in.)
4.4 Specific Installation using the Mounting Kit
The L-SA4 SHD Antenna is provided with a mounting kit for specific installations. This mounting kit
can be used to orient the active face of the antenna depending on your application.
Figure 4: Using the Mounting Kit (Overview)
Figure 5: Using the Mounting Kit (Close-up View)
Flat-headed screw M4x12 + washer
Active face
This configuration reduces reading or writing performance (distance). For optimum performance,
the antenna must placed above the desk and not underneath.
Always ensure that metallic or conductive parts are located under the antenna.
Metallic or conductive parts must not be present in front of the active face of the antenna.
For best performance, always request an installation compliance agreement from TAGSYS
Custom Services regarding your specific installation.
The TAGSYS Antenna Tuning Kit Device may be required to verify the tuning of antennas for
a specific installation.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 17/23
5 Operation
L-SA4 SHD Antenna can be set-up in different ways. The antenna configuration and choice of its
components depend on the individual library.
The L-SA4 SHD Antenna can be connected either to the Medio P200L, L-L100 or L-P101 readers.
The following conditions must be followed for optimal reading performance of several items at
once:
•
Use of Folio 370 tags for books and CDs/DVDs.
•
Minimum book thickness of 15 mm.
•
Maximum stack height of 150 mm with a maximum of 5 books.
•
4 different tagging positions for books (please see Tagging documentation).
Performance is based on these parameters and may vary in function of the operating conditions.
When using CD tags, we recommend spreading CDs/DVDs over the antenna area with minimum
overlapping of items as the metallic content of CDs/DVDs may prevent correct tag reading by the
antenna. We also recommend the use ob BiblioDispack® and/or SCANAVO® for up to 4
CDs/DVDs.
Table 2: Minimum Antenna Performance
Parameter L-SA4 SHD
Using a single Folio
370 tag 6 in. (150 mm.)
CDs/DVDs with 370
CD tag 4.7 in. (120 mm.)
Folio 370 ISO 6.3 in (160 mm.)
These performances have a minimum achievable. According to operating conditions they will
improve.
According to the thickness and coverage metallization of the CDs/DVDs performance will be
reduced especially when dealing with multiple CDs/DVDs packs.
L-SA4 SHD Antenna User's Guide
18/23 Revision 1.1 August 2010
6 Maintenance
6.1 Servicing the L-SA4 SHD Antenna
CAUTION: The L-SA4 SHD Antenna contains no operator serviceable parts and must only be
serviced by qualified personnel.
No regular servicing is required, except for keeping the unit clean.
It is recommended that the antenna unit be inspected at least once per year by an approved
TAGSYS technical representative.
6.2 Antenna Tuning
When the L-SA4 SHD Antenna is installed underneath the table or desk with the supplied mounting
kit, the reading performances can be significantly reduced. If this happens, it means that the table
or the desk contains metallic parts or other magnetically conductive materials.
In such cases, it is strongly recommended to use a different table made of a different material that
does not present such attenuation, or to change the location of the antenna under the table.
If this is not possible, the antenna may be re-tuned for a limited range with an aim to improve the
reading range.
To re-tune the antenna, you have to use the TAGSYS Antenna Tuning Kit and perform the
procedure described in the TAGSYS Antenna Tuning Kit documentation. The tuning capacitor of
the L-SA4 SHD Antenna is accessible from the bottom side of the antenna and is located under the
TAGSYS logo located at the top left corner of the label which specifies the product type and serial
number (Figure 6).
Two separate tuning capacitors are used to tuned both phase and amplitude of the antenna signal.
Optimum tuning and electrical cable length are necessary to allow multiple CDs/DVDs
operation.
Figure 6: Position of the Tuning Capacitor on L-SA4 SHD Antenna
Tuning Capacitors under Label
When re-tuning the antenna, please turn the tuning capacitor with care.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 19/23
Any re-tuning of the antenna will damage the label but will not void the warranty of the L-SA4 SHD
Antenna provided the tuning procedure defined in the antenna tuning kit has been followed.
CAUTION: When retuning the antenna, make sure that the antenna is not connected to the
reader and that the reader is switched off.
L-SA4 SHD Antenna User's Guide
20/23 Revision 1.1 August 2010
7 Technical Data
7.1 Mechanical Characteristics
Description Value
Housing Blue Plastic ABS UL 94-V0
Dimensions (with Cover) 288 x 263 x 21 mm. (11⅓ x 10⅓ x 0.85 in.)
Weight 2.0 kg. (4.4 lb.)
Color Pantone P536 Blue
Protection Class IP 21
Operating Temperature 0 °C to 55 °C (32 °F to 131 ° F)
Storage Temperature –25 °C to +60 °C (–13 °F to 140 °F)
Figure 7: L-SA4 SHD Antenna Dimensions (in millimeters)
288
263
17
262
230
4 x M4
(Mounting brackets)
7.2 Electrical Characteristics
Description Value
Maximum Input Power 1.2 W
Operating Frequency 13.56 MHz
Antenna Connection 50-Ω BNC Connection
Impedance 50 ± 5 Ω and 0 ± 5 °
Typical Performances (*) Reading: 6 in. (150 mm.)
(*) Tests results in laboratory with L-P101 Library reader and a Folio 370 smart label in standard
desktop configuration.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 21/23
8 Warranty Conditions
8.1 Warranty
TAGSYS warrants that its L-SA4 SHD Antenna (Product) shall comply with the functional
specifications set forth herein for a period of one year from the date of delivery to the Buyer.
This warranty is valid for the original Buyer of the Product and is not assignable or transferable to
any other party.
TAGSYS cannot be responsible in any way for, and disclaims any liability in connection with the
operation or performance of:
• any product in which the Product is incorporated;
• any equipment not supplied by TAGSYS which is attached to or used in connection with the
Product;
• the Product with any equipment.
This warranty only applies to the Product and excludes all other equipment.
Optimal operation and performance of the Product are obtained by using TAGSYS’ readers, by
applying TAGSYS installation guidelines and by having your installation reviewed by a TAGSYS’
technical consultant.
The TAGSYS warranty does not cover the installation, maintenance or service of the Product and
is strictly limited to the replacement of Products considered as defective by TAGSYS and returned
according to the return procedure defined below; in such case, TAGSYS will, at TAGSYS’ option,
either replace every defective Product by one new Product or refund the purchase price paid by
Buyer to TAGSYS for the defective Product.
8.1.1 Warranty Exclusions
The following conditions are not covered under the warranty:
• Defects or damages resulting from storage of the Product under conditions that do not
comply with TAGSYS specifications or normal usage.
• Defects or damages resulting from use of the Product in abnormal conditions (abnormal
conditions being defined as any conditions exceeding the ones stated in the product
specifications).
• Defects or damages from misuse, accident or neglect.
• Defects from improper testing, operation, maintenance or installation.
• Defects from alteration, modification except modifications or adjustments specifically
described in this Product reference guide, adjustment or repair, or any attempt to do any of
the foregoing, by anyone other than TAGSYS.
• Any action on the product that prevents TAGSYS to perform an inspection and test of the
Product in case of a warranty claim.
• Tampering with or abuse of the Product.
• Any use or incorporation by the Buyer or a third party of TAGSYS’ Product into life saving
or life support devices or systems, or any related products; TAGSYS expressly excludes
any liability for such use.
L-SA4 SHD Antenna User's Guide
22/23 Revision 1.1 August 2010
8.1.2 General Provisions
This warranty sets forth the full extent of TAGSYS responsibility regarding the Product.
In any event, TAGSYS warranty is strictly limited to (at TAGSYS’ sole option) the replacement, the
repair or refund of the Products purchase price to TAGSYS, of Products considered as defective
by TAGSYS.
The remedy provided above is in lieu and to the exclusion of all other remedies, obligations or
liabilities on the part of TAGSYS for damages, whether in contract, tort or otherwise, and including
but not limited to, damages for any defects in the Products or for any injury, damage, or loss
resulting from such defects or from any work done in connection therewith or for consequential
loss, whether based upon lost goodwill, lost resale profits, impairment of other goods or arising
from claims by third parties or otherwise.
TAGSYS disclaims any explicit warranty not provided herein and any implied warranty, guaranty or
representation as to performance, quality and absence of hidden defects, and any remedy for
breach of contract, which but for this provision, might arise by implication, operation of law, custom
of trade or course of dealing, including implied warranties of merchantability and fitness for a
particular purpose.
8.1.3 How to Return Defective Products
The Buyer shall notify TAGSYS of the defects within 15 working days after the defects are
discovered.
Defective Products must be returned to TAGSYS after assignment by a TAGSYS Quality
Department representative of an RMA (Return Material Authorization) number. No Products shall
be returned without their proof of purchase and without the acceptance number relating to the
return procedure.
All Products shall be returned with a report from the Buyer stating the complete details of the
alleged defect.
Call +33 (0) 4 42 18 89 36 for return authorization and shipping address.
If returned Products prove to be non-defective, a charge will be applied to cover TAGSYS’ analysis
cost and shipping costs.
If the warranty does not apply for returned Products (due to age, or application of a warranty
exclusion clause), a quote for replacement will be issued, and no replacement will be granted until
a valid purchase order is received. If no purchase order is received within 30 days after the date of
TAGSYS quote, TAGSYS will return the products and charge the analysis cost and shipping costs.
All replaced Products shall become the property of TAGSYS.
The Product Return Form is included on the following page. This form should accompany any
product you need to return to TAGSYS for analysis in the event of a problem.
In all cases, specific warranty conditions as described in the sales contract will
always prevail.
L-SA4 SHD Antenna User's Guide
August 2010 Revision 1.1 23/23
Product Return Form
Customer Profile:
Company: ..................................................................
Address: ....................................................................
...................................................................................
...................................................................................
City & State:...............................................................
Zip Code: ...................................................................
Country: .....................................................................
Contact Name: .........................................................
Contact e-mail: ........................................................
Contact Phone: ........................................................
Contact Fax:.............................................................
Order identification:
Product Name:...........................................................
Order Number (OEF):................................................
Invoice Number:.......................................................
Return Quantity: ......................................................
Reason for return:
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
...........................................................................................................................................................................
To inform TAGSYS of this return, please email it to
RMA@tagsysrfid.com
Address to ship the product with this document attached:
TAGSYS
QUALITY DEPARTMENT
TAGSYS – 785 Voie Antiope, Athélia III,
13600 La Ciotat, France
To inform TAGSYS of this return, please also fax it to your Customer Service Representative
+33 (0) 4 42 18 89 01
Return Procedure:
The product returned will go through stringent quality controls.
A final analysis report will be sent to you as soon as possible.
Please contact your Quality Service representative for further details.
+33 (0) 4 42 18 89 36
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE)
This means that this product must be handled pursuant to European Directive 2002/96/EC in
order to be recycled or dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.

Navigation menu