Tait TBBH5F Base Station Transceiver User Manual TB8100 Installation and Operation Manual
Tait Limited Base Station Transceiver TB8100 Installation and Operation Manual
Tait >
Operational users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 499434 |
| Application ID | eXhBrotrEb4/y522Sbhz7Q== |
| Document Description | Operational users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 23.03kB (287920 bits) |
| Date Submitted | 2004-12-21 00:00:00 |
| Date Available | 2004-12-21 00:00:00 |
| Creation Date | 2004-12-02 09:06:28 |
| Producing Software | Acrobat Distiller 4.05 for Windows |
| Document Lastmod | 2004-12-07 14:23:06 |
| Document Title | TB8100 Installation and Operation Manual |
| Document Creator | FrameMaker 6.0 |
| Document Author: | Tait Electronics Ltd |
TB7200 base station Installation and Operation Manual MBA-00005-04 Issue 4 December 2004 Tait Contact Information Tait Radio Communications http:// www.taitworld.com Corporate Head Office New Zealand Tait North Asia Tait Electronics Ltd P.O. Box 1645 Christchurch New Zealand E-mail: info@taitworld.com Website: http://www.taitworld.com Technical Support: E-mail: support@taitworld.com Website: http://support.taitworld.com Tait North America Regional Head Office - United States of America Tait North America Inc. E-mail: usa@taitworld.com Regional Head Office - Hong Kong Tait Mobile Radio (Hong Kong) Ltd E-mail: hongkong@taitworld.com Beijing Tait Mobile Radio (Hong Kong) Ltd E-mail: beijing@taitworld.com Tait South Asia Regional Head Office - Singapore Tait Electronics (Far East) Pte Ltd E-mail: singapore@taitworld.com Thailand Tait Mobile Radio Ltd E-mail: thailand@taitworld.com Canada Tait North America Inc. E-mail: canada@taitworld.com Oceania Latin America Australia Tait Electronics (Aust) Pty Ltd E-mail: australia@taitworld.com Tait Latin America E-mail: latinamerica@taitworld.com Tait Europe Regional Head Office - United Kingdom Tait Europe Ltd E-mail: teusales@tait.co.uk New Zealand Tait Communications Ltd E-mail: headoffice@tcl.tait.co.nz Note: For the addresses and phone numbers of the above regional offices refer to the TaitWorld website. TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Contents Preface Description Controls Configuration Installation Connection Functional Description Circuit Description TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Preface Scope of Manual Welcome to the TB7200 base station Installation and Operation Manual. This manual provides information on installing and operating the TB7200 hardware. Enquiries and Comments If you have any enquiries regarding this manual, or any comments, suggestions and notifications of errors, please contact Technical Support (refer to “Tait Contact Information” on page 2). Updates of Manual and Equipment In the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Ltd reserves the right to update the equipment or this manual or both without prior notice. Copyright All information contained in this manual is the property of Tait Electronics Ltd. All rights are reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Electronics Ltd. All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers. Disclaimer There are no warranties extended or granted by this manual. Tait Electronics Ltd accepts no responsibility for damage arising from use of the information contained in the manual or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions. TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Installation This chapter describes how to install the TB7200 base station in a standard 19 inch rack or cabinet. It also provides some general information on safety precautions and site requirements. We recommend that you read the entire chapter before beginning the installation. 1.1 Personal Safety 1.1.1 Explosive Environments Warning!! 1.1.2 Do not operate TB7200 base station equipment near electrical blasting caps or in an explosive atmosphere. Operating the equipment in these environments is a definite safety hazard. Proximity to RF Transmissions Do not operate the transmitter when someone is standing within 90cm (3ft) of the antenna. Do not operate the transmitter unless you have checked that all RF connectors are secure. 1.2 Equipment Safety 1.2.1 ESD Precautions Important This equipment contains devices which are susceptible to damage from static charges. You must handle these devices carefully and according to the procedures described in the manufacturers’ data books. We recommend you purchase an antistatic bench kit from a reputable manufacturer and install and test it according to the manufacturer’s instructions. Figure 1.1 shows a typical antistatic bench set-up. You can obtain further information on antistatic precautions and the dangers of electrostatic discharge (ESD) from standards such as ANSI/ESD S20.20-1999 or BS EN 100015-4 1994. TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Installation Figure 1.1 Typical antistatic bench set-up conductive wrist strap dissipative rubber bench mat common point ground (building ground or mains ground via 1M ohm series resistor) 1.2.2 Antenna Load The TB7200 base station equipment has been designed to operate safely under a wide range of antenna loading conditions. However, we strongly recommend that the transmitter should always be operated with a suitable load to prevent damage to the transmitter output power stage. 1.2.3 Equipment Grounding To ensure safe operation the TB7200 base station equipment must be correctly grounded as described in these installation instructions. 1.2.4 Installation and Servicing Personnel The TB7200 base station should be installed and serviced only by qualified personnel. 1.3 Regulatory Information 1.3.1 Distress Frequencies The 406 to 406.1MHz frequency range is reserved worldwide for use by Distress Beacons. Do not program transmitters to operate in this frequency range. Installation TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 1.3.2 FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. 1.3.3 Unauthorised Modifications Any modifications you make to this equipment which are not authorised by Tait Electronics Ltd may invalidate your compliance authority’s approval to operate the equipment. 1.4 Environmental Conditions 1.4.1 Operating Temperature Range The operating temperature range of the TB7200 base station is –30°C to +60°C (–22°F to +140°F) ambient temperature. Ambient temperature is defined as the temperature of the air at the intake to the cooling fans. 1.4.2 Humidity The humidity should not exceed 95% relative humidity through the specified operating temperature range. 1.4.3 Dust and Dirt For uncontrolled environments, the level of airborne particulates must not exceed 100µg/m3. TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Installation 8 Installation TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Controls and Connections Figure 2.1 TB7200 base station controls and connections Front View cooling fans programming port Tx/Rx programming selector switch indicator LEDs function buttons speaker volume speaker Rear View DC input system interface connector audio level set-up pots RS-232 serial port RF input (without internal duplexer) RF output (without internal duplexer) RF input/output (with internal duplexer) Side View tuning holes for optional duplexer TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004 Controls and Connections 10 Controls and Connections TB7200 Installation and Operation Manual © Tait Electronics Limited December 2004
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Producer : Acrobat Distiller 4.05 for Windows Creator : FrameMaker 6.0 Modify Date : 2004:12:07 14:23:06+14:00 Author : Tait Electronics Ltd Title : TB8100 Installation and Operation Manual Create Date : 2004:12:02 09:06:28 Page Count : 10 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools