Tait TEL0047 One way paging transmitters T836-26-1010 & T836-26 User Manual 8c300 a3 bk
Tait Limited One way paging transmitters T836-26-1010 & T836-26 8c300 a3 bk
Tait >
Contents
- 1. T836 Diagram of units
- 2. Installation Guide
- 3. Manual
T836 Diagram of units
M830-00 T836/837 General Information C1.3 The photograph in Figure 1.1 on the next page will help you to identify the main circuit blocks in the T836. There is a similar photograph in Figure 4.4 which shows the main tuning and adjustment controls. Extending both these fold-outs will allow you to refer to both photographs while using the manual. The photograph in Figure 1.2 on the next page shows the T836 front panel controls. Copyright TEL 30/04/98 C1.4 T836/837 General Information M830-00 10 Keys the transmitter (while disabling the 600Ω line and microphone audio). On LED The On LED is lit when the T836 is transmitting. RF output D-range connector (“D-range 1”) incl. audio in & DC in (refer to Section 2.2 in Part F) microcontroller Line Sensitivity Sets the gain of the 600Ω line input of the audio processor. Supply LED The Supply LED is lit when DC power is supplied to the transmitter. 8 microcontroller and CTCSS 9 duct for cabling to extra D-range (if fitted) 10 D-range Carrier Switch Microphone Socket Key: low pass filter PA exciter drive amplifier audio processor VCO regulators synthesiser For connecting a T800-80 microphone to allow local control of the transmitter. The 600Ω line is disabled when the PTT button is pressed. Figure 1.1 T836 Main Circuit Block Identification Figure 1.2 T836 Front Panel Controls 30/04/98 Copyright TEL M830-00 T836/837 General Information C1.5 The photograph in Figure 1.3 on the next page will help you to identify the main circuit blocks in the T837. There is a similar photograph in Figure 4.5 which shows the main tuning and adjustment controls. Extending both these fold-outs will allow you to refer to both photographs while using the manual. The photograph in Figure 1.4 on the next page shows the T837 front panel controls. Copyright TEL 30/04/98 C1.6 T836/837 General Information M830-00 Keys the exciter (while disabling the 600Ω line and microphone audio). RF output D-range connector (“D-range 1”) incl. audio in & DC in (refer to Section 2.2 in Part F) microcontroller On LED The On LED is lit when the T837 is transmitting. Line Sensitivity Sets the gain of the 600Ω line input of the audio processor. Supply LED The Supply LED is lit when DC power is supplied to the exciter. duct for cabling to extra D-range (if fitted) D-range Carrier Switch Microphone Socket Key: low pass filter exciter drive amplifier audio processor VCO regulators synthesiser microcontroller and CTCSS For connecting a T800-80 microphone to allow local control of the exciter. The 600Ω line is disabled when the PTT button is pressed. Figure 1.3 T837 Main Circuit Block Identification Figure 1.4 T837 Front Panel Controls 30/04/98 Copyright TEL T836/837 Functional Testing M830-00 C4.9 RV805 CTCSS level adjust CV451 SK805 PL4-1 IC700 TCXO R460 L490 CV1 RV310 temperature adjust RV330 high temperature power adjust RV320 power adjust The photograph printed at right will help you to identify the main controls used in tuning and adjusting the T836. There is a similar photograph in Figure 1.1 which shows the main circuit blocks. Extending both these fold-outs will allow you to refer to both photographs while using the manual. Copyright TEL SW230 carrier RV210 line sensitivity RV220 compression level PL205 PL220 PL215 PL210 Figure 4.4 T836 Main Tuning & Adjustment Controls 30/04/98
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Modify Date : 2000:07:28 08:14:33 Title : 8c300_a3.bk Author : daver Creator : FrameMaker 5.5.2L11a Producer : Acrobat Distiller 3.01 for Windows Create Date : 2000:07:28 08:13:45 Page Count : 5EXIF Metadata provided by EXIF.tools