Tait TEL0062 Hand Portable Transmitter User Manual Orca Operator s Manual
Tait Limited Hand Portable Transmitter Orca Operator s Manual
Tait >
Contents
- 1. User Guide
- 2. Operators Manual
- 3. User Guide Training Supplement
User Guide Training Supplement
![11RF Exposure Compliance & Control GuidelinesTo control your exposure and ensure compliance with the occupational/controlled environment exposure limits always adhere to the following procedures.Guidelines:■Do not remove the RF Exposure Label from the device.■User awareness instructions must accompany device when transferred to other users.■Do not use this device if the operational require-ments described herein are not met.Operating Instructions:■Transmit no more than the rated duty factor of 20% of the time. To transmit (talk), push the Push-To-Talk (PTT) button. To receive calls, release the PTT button. Transmitting 20% of the time, or less, is important because this radio generates measurable RF energy exposure only when transmitting (in terms of measuring for standards compliance).■When transmitting, hold the radio microphone 25 to 50 mm (1 to 2 inches) from your mouth.■When transmitting, keep the antenna at least 25 mm (1 inch) from any part of your body, especially your face and eyes.■If you are not using a body-worn accessory and are not using the radio in the intended use position in front of the face, then ensure the antenna and the radio are kept at least 25 mm (1 inch) from the body when transmitting. Keeping the radio at the proper distance is important because RF exposures decrease with increasing distance from the antenna.■Use only Tait approved supplied or replacement antennas, batteries, and accessories. Use of non-Tait approved antennas, batteries and accessories may](https://usermanual.wiki/Tait/TEL0062.User-Guide-Training-Supplement/User-Guide-325864-Page-1.png)
![2 2exceed the FCC RF exposure guidelines.■When worn on the body, always place the radio in a Tait approved carrying accessory for this product. Using approved body-worn accessories is important because the use of Tait or other manufacturers’ non-approved accessories may result in exposure levels which exceed the FCC’s occupational/controlled environment RF exposure limits. For a list of Tait approved accessories, please visit the following website which lists approved accessories:http://www.taitworld.com/orca.](https://usermanual.wiki/Tait/TEL0062.User-Guide-Training-Supplement/User-Guide-325864-Page-2.png)