Tait TMAB1E Mobile Transceiver User Manual DM1 FCC UserGuide

Tait Limited Mobile Transceiver DM1 FCC UserGuide

Exhibit D Users Manual per 2 1033 c3

TM9100 mobilesUser’s GuideVersion 0.1July 2004
For your safety iFor your safetyFor your safetyPlease read the following safety and compliance information before using your radio.Radio frequency exposure informationFor your own safety and to ensure you comply with the Federal Communication Commission’s (FCC) radio frequency (RF) exposure guidelines, please read the following information before using this radio.Using this radioYou should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to.It is also important that you:■Do not remove the RF Exposure label from the radio.■Ensure this RF exposure information accompanies the radio when it is transferred to other users.■Do not use the radio if you do not adhere to the guidelines on controlling your exposure to RF.Controlling your exposure to RF energyThis radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromagnetic energy (as is sunlight), and there are recommended levels of maximum RF exposure. To control your exposure to RF and comply with the maximum exposure limits for occupational/controlled environments, follow these guidelines:■Do not talk (transmit) on the radio more than the rated transmit duty cycle. This is important because
ii For your safetyFor your safetythe radio radiates more energy when it is transmit-ting than when it is receiving.■While you are transmitting (talking or sending data) on the radio, you must ensure that there is always a distance of 0.9m (35 inches) between people and the antenna. This is the minimum safe distance.■Use the radio only with Tait-approved antennas and attachments, and make only authorized modifica-tions to the antenna otherwise you could damage the radio and violate FCC regulations.For more information on what RF energy is and how to control your exposure to it, visit the FCC website at http://www.fcc.gov/oet/rfsafety/rf-faqs.html.Compliance with RF energy exposure standardsThis two-way radio complies with these RF energy exposure standards and guidelines:■United States Federal Communications Commis-sion, Code of Federal Regulations; 47 CFR §§ 1.1307, 1.1310, and 2.1091. ■American National Standards Institute (ANSI) / Insti-tute of Electrical and Electronic Engineers (IEEE) C95.1-1992■Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition.This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen.Radio frequency emissions limits in the USAPart 15 of the FCC Rules imposes RF emission limits on electronic equipment to prevent interference to reception of broadcast services.
For your safety iiiFor your safetyThis radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.Unapproved modifications or changes to radioThe radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait Electronics Ltd. Failure to do so could invalidate compliance requirements and void the user’s authority to operate the radio.Interference to radio communicationsThis radio complies with Part 15 of the FCC Rules which specifies the limits for a Class B digital device.This radio generates, uses, and can radiate RF energy. This energy may cause harmful interference to radio communications if the radio is not installed and used according to the instructions in the user guide. If this radio does cause harmful interference, you should contact your radio provider for assistance.Frequency band reserved for distress beaconsFrequency band 406 to 406.1 MHz is reserved for use by distress beacons. Transmissions should not be made within this frequency band.Safe radio operationSwitch off the radio:■at petrol filling stations or near flammable liquids or gases■in the vicinity of explosive devices and blasting zones
iv For your safetyFor your safetyUsing a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area.Interference with electronic devicesSome electronic devices may be prone to malfunction due to the lack of protection from RF energy that is present when your radio is transmitting.Examples of electronic devices that may be affected by RF energy are:■vehicular electronic systems such as fuel injection, anti-skid brakes, and cruise control■medical devices such as hearing aids and pacemak-ers■medical equipment in hospitals or health care facili-ties.Consult the manufacturer (or its representative) of the equipment to determine whether these electronic circuits will perform normally when the radio is transmitting.High temperaturesThe bottom surface of the radio and the heatsink fins can become hot during prolonged operation. Do not touch these parts of the radio.Radio protectionAlways remove the fuses from the radio power cable before charging the vehicle battery, connecting a second battery or using power from another vehicle (e.g. when “jump-starting” the vehicle).
Contents vContentsContentsFor your safety ................................................................ iRadio frequency exposure information ......................... iUsing this radio........................................................ iControlling your exposure to RF energy ................... iCompliance with RF energy exposure standards ...... iiRadio frequency emissions limits in the USA................ iiUnapproved modifications or changes to radio .......... iiiInterference to radio communications ........................ iiiFrequency band reserved for distress beacons ............ iiiSafe radio operation .................................................. iiiInterference with electronic devices............................ ivHigh temperatures ..................................................... ivRadio protection ........................................................ iv1 About this guide.......................................... 1Document conventions ............................................... 1Safety symbols used in this guide............................ 1Feedback about this manual ....................................... 1Copyright information ................................................ 2Disclaimer ................................................................... 22 About your radio ......................................... 3About your digital radio .................................................4Lack of static noise...................................................... 4Coverage .................................................................... 4Basic operation ...............................................................5Turning your radio on/off............................................ 6Adjusting the volume.................................................. 6Making calls................................................................ 6About the press-to-talk (PTT) key ................................ 7Using keys to access commonly used features ................8Emergency key............................................................ 8Viewing your function key settings.............................. 8Understanding the radio display .....................................9Display symbols........................................................... 9Using the menus to access settings ...............................10Selection keys ........................................................... 10
vi ContentsContentsScroll keys ................................................................ 10Accessing menus ...................................................... 11Accessing frequently used menus ............................. 11Using the scroll key Quick Access menu................ 11Using the left selection key Quick Access menu .... 12Understanding the radio indicators .............................. 13Alert tones ............................................................... 13Status indicators ....................................................... 14
About this guide 1About this guide1 About this guideThis user’s guide provides information about the TM9155 mobile radio.Document conventionsThe following conventions are used in this guide:Safety symbols used in this guideWithin this guide, the following symbols are used to alert you to important safety information:Warning: There is a potential risk of death or serious injury.Caution: There is the risk of minor or moderate injury to people.Important: There is a risk of equipment damage or malfunction.Feedback about this manualAny enquiries regarding this manual as well as any comments, suggestions and notifications of errors, should be addressed to support@taitworld.com or to the Support Group Manager, Tait Electronics Limited, PO Box 1645, Christchurch, New Zealand.Convention ExplanationBold text Indicates text that appears on the radio display.Note: Indicates additional information that you may find useful to know. Tip: Provides a helpful hint.
2 About this guideAbout this guideCopyright informationAll information contained in this manual is the property of Tait Electronics Limited. All rights are reserved. These manuals may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Electronics Limited. All trade names referenced are the service mark, trademark, or registered trademark of the respective manufacturers.DisclaimerIn the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Ltd reserves the right to update both the equipment or this user’s guide, without prior notice.
About your radio 3About your radio2 About your radioThis section describes all the various buttons and keys on your radio.This section covers:■About your digital radio■Basic operation■Using keys to access commonly used features■Understanding the radio display■Using the menus to access settings■Understanding the radio indicators
4 About your digital radioAbout your radioAbout your digital radioYou may notice some differences in the way digital and analog radios perform: the lack of static in low signal areas and consequently where you notice that coverage is poor.Lack of static noiseYou may notice the lack of static noise on digital channels. This lack of static is because your digital radio removes the “noise” from the transmission so that you hear only clear voice. CoverageWith analog radios, a transmission gets progressively worse when you are in fringe areas or even slightly outside normal coverage areas. In these circumstances, you are probably able to still understand the transmission despite the amount of static because the human brain can interpret speech even when it is not perfectly clear. With digital radios, the signal remains clear and then drops off quite quickly at the border of a transmission area. The reason for this is that a digital transmission is either received or it isn't.Because of this difference you may notice that digital radios have different coverage patterns to analog radios. However, the actual coverage area between an analog and a digital voice system is very similar.
Basic operation 5About your radioBasic operationThe radio controls are the PTT key, volume control, on/off key, scroll keys, selection keys and function keys. Some keys have functions assigned to both short and long key presses:The radio controls are the PTT key, power/volume control, channel selector, three-way selector control, scroll keys, selection keys, and function keys. Some keys have functions assigned to both short and long key presses:■a short key press is less than one second, and ■a long key press is more than one secondThe radio controls and their functions are described in the following sections.scroll keyson/off keyvolumecontrolmicrophonesocketPTT key(press-to-talk)reddisplay speakergreenambermicrophoneradio status LEDsfunction keys 1 to 4 left selection keyright selection key
6 Basic operationAbout your radioTurning your radio on/offA long press of the on/off key turns the radio either on or off. When the radio is first turned on, the red, green and amber LEDs flash briefly and the radio gives two short beeps..Adjusting the volumeRotate the volume control clockwise to increase the speaker volume, and counter-clockwise to decrease the volume. The raised dot indicates the current volume setting.Making calls1Select the required channel, scan group, zone or preset call.2Lift the microphone off the microphone clip.3Hold the microphone about 5 cm (2 inches) from your mouth and press the PTT key to transmit.Note: If the channel is busy, you will not be able to transmit. Wait until the red status LED has stopped flashing, and then try again.4Speak clearly into the microphone and release the PTT key when you have finished talking.volume controlon/off key
Basic operation 7About your radioAbout the press-to-talk (PTT) keyPress and hold the PTT key to talk. Release it to listen.PTT key (press-to-talk)microphone
8 Using keys to access commonly used featuresAbout your radioUsing keys to access commonly used featuresThe function keys provide quick access to the features you will use most often. The action that the keys perform will depend on how your radio has been programmed..Emergency keyYou may be able to activate emergency mode by pressing the F1 key (if your radio has been programmed in this way).Viewing your function key settingsYou can easily check which functions are assigned to the function keys, if you have forgotten.1Press Menu, scroll to Radio Information and press Select.2Scroll to Key Settings and press Select.3In the menu list, scroll to a function key and press Select to view the function assigned to it.emergency keyfunction keys 1 to 4
Understanding the radio display 9About your radioUnderstanding the radio displayThe messages and symbols you see on your radio display depends on the mode in which your radio is operating and the way it has been programmed.Display symbolsThese are the various symbols you may see on your radio display.Symbol MeaningRSSI (received signal strength indicator): the more bars, the stronger the signal being received by your radioNetwork available: your radio has access to a digital networkTransmit: your radio is transmittingLow-power transmit: your radio is transmitting on low powerZone symbol: your radio is operating in this zone (the example shown is zone 3)Scanning: your radio is monitoring a group of channels for activityMonitor or squelch override: monitor or squelch override is activeScrolling: you can use the scroll keys or to move through a list
10 Using the menus to access settingsAbout your radioUsing the menus to access settingsYou can access settings and features for your radio using the menu. The menus available will depend on the way your radio has been programmed. The selection and scroll keys enable you to select and move around the menus.Selection keysThere are two selection keys beneath the display screen. How these keys work depends on the word that appears above them on the screen.Scroll keysThe up and down scroll keys allow you to:■access the quick access menu ■scroll up and down through a list, and select items.Tip: If you press and hold the scroll keys, the scroll speed increases.right selection keyleft selection keyscroll keys
Using the menus to access settings 11About your radio■display the previous or next part of a message that is too long to be displayed on the screen.Accessing menus1To access the main menu, press the right selection key whenever Menu appears above it.2Use the scroll keys to move through the list of menus.3When the menu you want is highlighted, press Select to enter the menu you have chosen.Accessing frequently used menusDepending on how your radio has been programmed, you may have two different ‘quick access’ menus. One quick access menu is displayed when you press a scroll key, and the other when you press the left selection key. These give you easy access to the menus you use most often.Using the scroll key Quick Access menuTo use this Quick Access menu:■Press a scroll key or , and the Quick Access menu appears.
12 Using the menus to access settingsAbout your radioIn this example, the Channels menu is the Quick Access menu. You can press a scroll key or to go directly to the Channels menu.The Channels menu, with a list of your available channels and scan groups, is now displayed.Using the left selection key Quick Access menuThe text above the left selection key corresponds to the Quick Access menu, for example, Channels.To use this Quick Access menu:■Press your left selection key , and the associated menu appears.
Understanding the radio indicators 13About your radioUnderstanding the radio indicatorsThe status LED indicators and the radio’s audible tones—together with the radio display—all combine to give you information about the state of your radio.The status LED indicator and the radio’s audible tones—together with the radio display—all combine to give you information about the state of your radio.The most common operation of the indicators are described in the following sections.Alert tonesNote: If quiet or silent mode has been turned on, you will not hear any alert tones.Tone MeaningTwo short beepsRadio turned on: the radio is powered on and ready to useOne short beepRadio turned off: the radio is powered off, orValid keypress: the action you have attempted is permittedOne long, low-pitched beepInvalid keypress: the action you have attempted is not permitted, orTransmission inhibited: you have attempted to transmit but for some reason transmission is not permitted at this time
14 Understanding the radio indicatorsAbout your radioStatus indicatorsNote: The way these indicators behave may be affected by the way your radio is programmed.redgreenamberradio status LEDsLED MeaningRed (transmit)Glowing: your radio is transmittingFlashing: your transmit timer is about to expire, or your radio is stunned.Green (receive)Glowing: you are receivingFlashing: you have received a callAmber (scanning)Glowing: your radio is scanning a group of channels for activityFlashing: your radio has detected activity on a channel, and has halted on this channel

Navigation menu