Tait TMAH7B Mobile Transceiver User Manual TM8100 Multilingual User Guide

Tait Limited Mobile Transceiver TM8100 Multilingual User Guide

Exhibit D Users Manual per 2 1033 c3

MMA-00002-01 Issue 1 1Changes to this manualIn the interests of improving the performance, reliability or servicing of the equipment, Tait Electronics Ltd reserves the right to update both the equip-ment or this user’s manual, without prior notice.Website: For contact details and technical assistance, go tohttp://www.taitworld.com/, andhttp://support.taitworld.com/.Mise à jour de ce guideDans le but d’améliorer la performance, la fiabilité et l’entretien, Tait Electronics Ltd se réserve le droit de mettre à jour son équipement et/ou ce guide de l’utilisateur sans notification préalable.Site Web : pour nos coordonnées ou une assistance technique, consultez http://www.taitworld.com/, ethttp://support.taitworld.com/.Actualización de esta guíaCon el fin de mejorar el rendimiento, la confiabilidad o el servicio del equipamiento, Tait Electronics Ltd se reserva el derecho de actualizar tanto el equipo como esta guía del usuario sin previo aviso.Sitio en internet: Para obtener asistencia técnica y los datos acerca de cómo comunicarse con nosotros, diríjase ahttp://www.taitworld.com/, yhttp://support.taitworld.com/.更新本指南更新本指南更新本指南更新本指南为改善设备的性能、可靠性或维护,Tait 电子有限公司保留在不事先通知的情况下更新本设备或用户指南的权利。网址:网址:网址:网址:有关联系详情和技术支持,请浏览http://www.taitworld.com/,及http://support.taitworld.com/。EnglishFrançaisEspañol中中中中文文文文
2Directive 1999/5/EC Declaration of ConformityDirective 1999/5/EC Declaration of Conformityda DanskUndertegnede Tait Electronics Ltd erklærer herved, at følgende udstyr TMAB1A & TMAH5A overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.Se endvidere: http://eudocs.taitworld.com/de DeutschHiermit erklärt Tait Electronics Ltd die Übereinstimmung des Gerätes TMAB1A & TMAH5A mit den grundlegenden Anforderungen und den anderen relevan-ten Festlegungen der Richtlinie 1999/5/EG.Siehe auch: http://eudocs.taitworld.com/el ΕλληνικόςΜε την παρουσα Tait Electronics Ltd δηλωνει οτι TMAB1A & TMAH5A συµµορφωνεται προσ τισ ουσιωδεισ απαιτησεισ και τισ λοιπεσ σχετικεσ διαταξεισ τησ οδηγιασ 1999/5/ΕΚ.βλέπε και: http://eudocs.taitworld.com/en EnglishTait Electronics Ltd declares that this TMAB1A & TMAH5A complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. See also: http://eudocs.taitworld.com/es EspañolPor medio de la presente Tait Electronics Ltd declara que el TMAB1A & TMAH5A cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.Vea también: http://eudocs.taitworld.com/fi SuomiTait Electronics Ltd vakuuttaa täten että TMAB1A & TMAH5A tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimus-ten ja sitä koskevien direktiivin muiden ehtojen mukainen.Katso: http://eudocs.taitworld.com/fr FrançaisPar la présente, Tait Electronics Ltd déclare que l'appareil TMAB1A & TMAH5A est conforme aux exigences essentielles et aux autres dispositions pertinentes de la direc-tive 1999/5/CE.Voir aussi: http://eudocs.taitworld.com/it ItalianoCon la presente Tait Electronics Ltd dichiara che questo TMAB1A & TMAH5A è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla diret-tiva 1999/5/CE. Vedi anche: http://eudocs.taitworld.com/nl NederlandsHierbij verklaart Tait Electronics Ltd dat het toestel TMAB1A & TMAH5A in overeen-stemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/ EG.Zie ook: http://eudocs.taitworld.com/pt PortuguêsTait Electronics Ltd declara que este TMAB1A & TMAH5A está conforme com os requisitos essenciais e outras provisões da Directiva 1999/5/CE.Veja também: http://eudocs.taitworld.com/sv SvenskHärmed intygar Tait Electronics Ltd att denna TMAB1A & TMAH5A står I överens-stämmelse med de väsentliga egenskapsk-rav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.Se även: http://eudocs.taitworld.com/
© Tait Electronics Ltd September 2004. All rights reserved.EnglishTM8100 User’s Guide
English
About this guide 5EnglishAbout this guideThis user’s guide provides information about TM8105, TM8110 and TM8115 mobile radios and is divided into two parts.■Part 1 explains how the TM8110 and TM8115 radios oper-ate. The TM8105 radio has a control head without a user interface, so no TM8105 operating information is needed.■Part 2 outlines the installation procedure for TM8105, TM8110 and TM8115 radios, and gives the pin alloca-tions for the TM8105 programming connector.Important safety informationThis user’s guide also contains important safety information about using and installing these radios. Refer to page 10 for user safety instructions and page 24 for installation safety instructions.Safety warnings used in this guideWithin this guide, the following conventions are used to alert you to important safely information:Warning: There is a potential risk of death or serious injury.Caution: There is the risk of minor or moderate injury to people.Caution: There is a risk of equipment damage or malfunction.Feedback about this guideIf you have any enquiries regarding this guide, or any comments, suggestions and notifications of errors, please contact Technical Support at support@taitworld.com.
6About this guideEnglishCopyright informationAll information contained in this guide is the property of Tait Electronics Ltd. All rights are reserved. These guides may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Electronics Ltd. All trade names referenced are the service mark, trademark, or registered trademark of the respective manufacturers.DisclaimerThere are no warranties extended or granted by this guide. Tait Electronics Ltd accepts no responsibility for damage aris-ing from use of the information contained in the guide or of the equipment and software it describes. It is the responsibil-ity of the user to ensure that use of such information, equip-ment and software complies with the laws, rules and regulations of the applicable jurisdictions.
Your radio’s settingsUse the following table to list your radio’s programmed settings.Channel listFunction key settingsID Description ID Description
channel selection keyson/off keyvolumecontrolmicrophonesocketpress-to-talk(PTT) keyreddisplay speakergreenambermicrophone radio status LEDsfunction keys1 and 2 function keys3 and 4
Radio operation 9EnglishPart 1: Radio operationAbout this guide  .......................................................................... 5Important safety information ....................................................................... 5Safety warnings used in this guide  .............................................................. 5Feedback about this guide .......................................................................... 5Copyright information ................................................................................. 6Disclaimer .................................................................................................. 6Safety warnings  ......................................................................... 10Safe operation .......................................................................................... 10EN 60950 requirements ............................................................................ 10High temperatures .................................................................................... 10Warning: FCC RF exposure limits  .............................................................. 10Radio protection ....................................................................................... 11Getting started  ........................................................................... 12Radio controls  .......................................................................................... 12Radio indicators ........................................................................................ 14Basic operation ........................................................................... 16Turning the radio on and off ..................................................................... 16Adjusting the volume ................................................................................ 16Selecting a channel ................................................................................... 16Making a call  ........................................................................................... 16Receiving a call ......................................................................................... 17What you hear on a channel ..................................................................... 17Monitor .................................................................................................... 18Scanning .................................................................................................. 18Voting ...................................................................................................... 19Troubleshooting ......................................................................... 20When your radio won’t turn on ................................................................. 20Removing the radio from the vehicle ......................................................... 20Describing the radio’s audible tones .......................................................... 21
10 Safety warningsEnglishSafety warningsSafe operationWarning: Switch the radio off at petrol filling stations or near flammable liquids or gases.Warning: Switch the radio off in the vicinity of explosive devices and blasting zones.Warning: Using a handheld microphone or a radio while driving a vehicle may violate the laws and legisla-tion that apply in your country or state. Please check the vehicle regulations in your area.EN 60950 requirements (25 watt radios)This radio complies with the European Union standard EN 60950 when operated up to the rated 33% duty cycle of two minutes transmit and four minutes receive, and with ambient temperatures of 30°C or lower.Caution: Operation outside these limits may cause the external temperature of the radio to rise higher than this standard permits.High temperaturesCaution: The bottom surface of the radio and the heatsink fins can become hot during prolonged operation. Do not touch these parts of the radio.Warning: FCC RF exposure limitsThis product generates RF (radio frequency) energy during transmissions. This device must be restricted to work-related use in an occupational/controlled exposure environment.The radio operator must have control of the exposure condi-tions and duration of all persons exposed to the antenna of this transmitter to satisfy FCC RF exposure compliance. This device is not approved for general population use.
Safety warnings 11English■This device must only be used with authorized accessories and antennas.■The operator must ensure that the minimum safe distance of 0.9m (35 inches) between persons and the antenna is maintained during transmissions.■This minimum safe distance is based on the assumption that there is a duty cycle of 50% transmit mode to stand-by or receive modes. The radio is in transmit mode when the PTT (press-to-talk) key on the microphone is pressed and the control head red LED (light emitting diode) glows.Please refer to the following website for more information on what RF energy is and how to control your exposure to assure compliance with established RF exposure limits.Website: http://www.fcc.gov/oet/rfsafety/rf-faqs.html.Radio protectionAlways remove the fuses from the radio power cable before charging the vehicle battery, connecting a second battery or using power from another vehicle (e.g. when “jump-starting” the vehicle).
12 Getting startedEnglishGetting startedThis section provides a brief description of your radio’s basic operation. If you need further information, contact your radio provider.Radio controlsThe radio controls are the PTT key, volume control, on/off key, channel selection keys and function keys. Some keys may have functions assigned to both short and long key presses:■a short key press is defined as less than one second, and■a long key press is more than one second.The radio controls and their functions are summarized in the following diagram.
Getting started 13Englishchannel selection keyson/off keyvolumecontrolmicrophonesocketpress-to-talk(PTT) keyreddisplay speakergreenambermicrophone radio status LEDsfunction keys1 and 2 function keys3 and 4Symbol Name FunctionPTT press and hold to transmit and release to listenvolume control rotate to change the speaker volumeon/off a long press turns the radio on or offchannel selection keysmove up and down through the channel listfunction keys 1, 2, 3 and 4function keys with programmed options
14 Getting startedEnglishRadio indicatorsThe LED indicators and the radio’s audible tones all combine to give you information about the state of your radio. Although the way these indicators behave is affected by the way your radio is programmed, the following sections describe the most common operation of the radio indicators.LED IndicatorsAudible tonesFor a description of other audible tones, see “Describing the radio’s audible tones” on page 21.LED Meaningred(transmit)glowing: your radio is transmittingflashing: your transmit timer is about to expiregreen(receive andmonitor)glowing: there is activity on the current channel, even though you may not be able to hear itflashing: you have received a call with valid special signalling, or you have activated monitor or squelch overrideamber(scanning)glowing: your radio is scanning a group of chan-nels for activityflashing: your radio has detected activity on a channel, and has halted on this channelfunctionkey LEDsthe operation of these LEDs depends on the type of function programmed for each function keyTone type Meaningone short beep after the power-up beepsradio locked: you need to enter your PIN (personal identity number) before you can use the radiotwo short beepsradio turned on: the radio is powered on and ready to use
Getting started 15Englishone short beepradio turned off: the radio is being powered off, orvalid keypress: the action you have attempted is permitted, orfunction activated: a function key has been pressed and that function has been initiatedone short, low-pitched beepfunction de-activated: a function key has been pressed and the corresponding func-tion has been turned offone long, low-pitched beepinvalid keypress: the action you have attempted is not permitted, ortransmission inhibited: you have attempted to transmit but for some reason transmission is not permitted at this timethree short beepschannel now free: you were prevented from transmitting on a busy channel and that channel is now freethree beepstransmit timeout imminent: in 10 seconds your transmit timer will expire and your current transmission will be terminatedTone type Meaning
16 Basic operationEnglishBasic operationThis section describes the basic operation of your radio, including turning the radio on and off, adjusting volume, selecting channels, making calls and receiving calls.Turning the radio on and offA long press of the on/off key   turns the radio either on or off. When the radio is first turned on, the red, green and amber LEDs flash briefly and the radio gives two short beeps.Adjusting the volumeRotate the volume control clockwise to increase the speaker volume and counterclockwise to decrease the volume. The volume control also changes the volume level of the radio’s audible indicators.Selecting a channelUse the channel selection keys   or   to scroll through the channel list until the channel you want is displayed.Making a call1Select the required channel using the channel selection keys  or .2Check the green LED.If the green LED is glowing, the channel is busy and you cannot transmit.3Once the channel is clear (the green LED is off), lift the microphone off the microphone clip.4Hold the microphone about 5cm (2 inches) from your mouth and press the PTT key to transmit.5Speak clearly into the microphone and release the PTT key when you have finished talking.Note: You cannot change channels while transmitting.
Basic operation 17EnglishTransmit timerYour radio may have a transmit timer that limits the amount of time you can transmit continuously. When the transmit timer is about to expire, the red LED flashes and the radio gives three beeps. You must release the PTT before you can transmit again.Note: Your radio may be unable to transmit for a short time after the transmit timer has expired.Receiving a callWhen there is valid activity on your radio’s currently selected channel or group, the radio then unmutes and you can hear the call.If the incoming call contains special signalling that matches the signalling programmed for your radio, the green LED flashes and your radio may give a ringing tone.What you hear on a channelYour radio may be programmed so that you hear all conversa-tions on a channel, or your user group may be segregated from other user groups by using special signalling. The special signalling is used to control the muting and unmuting of your radio, so that your radio is muted when other user groups are talking and unmuted for members of your user group.There are two muting controls that operate in your radio:■signalling mute, and■squelch.Signalling muteThe radio’s signalling mute only allows the radio to unmute if the incoming call carries the tones specific to your user group. Your user group may use tones that are either audible, subaudible or both.
18 Basic operationEnglishSquelchThe radio’s squelch allows the radio to unmute only when the strength of the incoming signal is above a predetermined threshold. This means that only signals of reasonable intelli-gibility are made audible.MonitorThe monitor function is used to check that the channel is clear before you make a call. While monitor is on, the green LED flashes continually.Activating monitor1Press the monitor function key and monitor overrides the signalling mute, allowing you to hear any traffic on the channel.Note: Your radio may be programmed to activate monitor whenever the microphone is off the microphone clip.2Press the monitor function key again to turn monitor off, and the green LED no longer flashes.Activating squelch override1Press and hold the monitor function key for longer than one second to override both squelch and the signalling mute.This allows you to hear even faint and noisy signals.2Press the monitor function key again to return the radio to a quiet state.Note: Squelch cannot be overridden when the radio is scanning.ScanningThe scan function is used to monitor a programmed group of channels, looking for activity. When activity is detected on a scan group channel, the radio stops on that channel. The amber LED flashes and, if the channel signalling is valid, the
Basic operation 19Englishradio unmutes and you can hear the call. Scanning resumes when the channel is no longer busy or the signalling is no longer valid.One or two priority scan channels may be set. These channels are scanned more often than other channels and are scanned periodically when a non-priority channel is busy.Activating scanning1Place the microphone on the microphone clip.2Press the function key assigned to scanning. The amber LED glows to show that the radio is scanning.3Press the scanning function key again to cancel scanning, and the amber LED no longer glows.Nuisance deleteIf a member channel of the scan group is busy for a long time and you do not wish to hear the conversation, you can use the function key assigned to nuisance delete to temporarily delete it from the scan group.Alternatively, press and hold the scanning function key. When the scan group is next selected, the deleted channel is again part of the scan group.Note: Priority channels cannot be removed from the scan group using the nuisance delete function.VotingA group of channels carrying the same traffic can be grouped together in a voting group. When you press the function key assigned to voting, the best communication channel is always selected for you to use.Nuisance deleteIf you wish to delete one of the channels from the voting group, you can use the function key assigned to nuisance delete to temporarily delete it from the voting group.
20 TroubleshootingEnglishTroubleshootingWhen your radio won’t turn onIf the red, green and amber LEDs on the control head do not light up when the radio is turned on, it is likely that no power is reaching the radio. Check the following:■Is the power connector firmly plugged into the rear of the radio?■Are the in-line fuses in good condition?■Is the power cable securely connected to the vehicle bat-tery or power supply?If all appears to be in order, then contact your radio provider for further assistance.Removing the radio from the vehicle1Switch off the radio.2Unscrew the four thumb screws   that secure the radio to the U-bracket  .3Lift the radio clear of the U-bracket.4Disconnect the antenna   and power cable   from the rear of the radio.acdababcd
Troubleshooting 21EnglishDescribing the radio’s audible tonesThe following table summarizes the radio’s audible tones.Tone type Meaningtwo short beeps radio turned on: the radio is powered on and ready to useone short beep after the power-up beepsradio locked: you need to enter your PIN (personal identity number) before you can use the radioone long, low-pitched beepradio PIN entry unsuccessful: you need to re-enter your PINtwo short beeps radio PIN entry successful: the radio is ready to use, orradio is revived: the radio has made opera-ble by your service providerone short beep radio turned off: the radio is being powered off, orvalid keypress: the action you have attempted is permitted, orfunction activated: a function key has been pressed and that function has been initiatedone short, low-pitched beepfunction de-activated: a function key has been pressed and the corresponding func-tion has been turned offone long, low-pitched beepinvalid keypress: the action you have attempted is not permitted, ortransmission inhibited: you have attempted to transmit but for some reason transmis-sion is not permitted at this timethree short beeps channel now free: you were prevented from transmitting on a busy channel and that channel is now freethree beeps transmit timeout imminent: in 10 seconds your transmit timer will expire and your current transmission will be terminated
22 TroubleshootingEnglishone short, high-pitched beepradio is stunned: the radio has been made inoperable by your service providertwo low-pitched beepsradio's temperature is high: the radio's temperature is in the high-temperature range, but the radio will continue to operatetwo high-pitched beepsradio's temperature is very high: the radio's temperature is in the very high temperature range and all transmissions will now be at low power; if the radio's temperature rises outside this range, transmissions will be inhibitedcontinuous low-pitched toneradio system error: a system error has occurred and the radio may be inoperable (E, E1 or E2 appears in the display)two long low-high pitched tone pairs synthesizer is out-of-lock: the radio's synthesizer is out-of-lock on the current channel and you cannot operate on that channel (Lor OL flashes in the display)Tone type Meaning
Radio installation procedures 23EnglishPart 2: Radio installation proceduresInstallation warnings  ................................................................. 24Safe radio mounting  ........................................................................... 24Interference with vehicular electronics ................................................. 24Preparation when drilling holes ........................................................... 25Vehicles powered by liquefied petroleum gas (LPG)  ............................. 25Radio installation in gas or fuel tankers ............................................... 25Non-standard radio installations  ......................................................... 25Negative ground supply ...................................................................... 26Installation planning .................................................................. 27MPT 1362 code of practice  ................................................................. 27Checking equipment ........................................................................... 27Installation tools ................................................................................. 28Selecting the mounting position .......................................................... 28Radio installation  ....................................................................... 29Installing and removing the control head ............................................. 29Installing the microphone  ................................................................... 31Installing the antenna ......................................................................... 32Installing the power cable ................................................................... 32Mounting the U-bracket  ..................................................................... 34Installing the radio in the U-bracket  .................................................... 35TM8105 programming connector ........................................................ 36Checking the installation  .................................................................... 37Other installation options .................................................................... 37Tait general software licence agreement ................................. 38
24 Installation warningsEnglishInstallation warningsThe following topics are covered in this section:■safe radio mounting■interference with vehicular electronics■preparation when drilling holes■vehicles powered by liquefied petroleum gas (LPG)■radio installation in gas or fuel tankers■non-standard radio installations■negative ground supply.Safe radio mountingCaution: Observe the following precautions when mounting the radio.■Mount the radio securely so that it will not break loose in the event of a collision. An unsecured radio is dangerous to the vehicle occupants.■Mount the radio where it will not interfere with the deployment of passenger air bags.■Do not mount the radio vertically, with the control head facing down. This will violate compliance with the Euro-pean Union standard EN 60950, Safety of Information Technology Equipment.Interference with vehicular electronicsCaution: Some vehicular electronic devices may be prone to malfunction, due to the lack of protection from RF energy present when your radio is transmitting.Examples of vehicular electronic devices that may be affected by RF energy are:■electronic fuel injection systems■electronic anti-skid braking systems■electronic cruise control systems.
Installation warnings 25EnglishIf the vehicle contains such equipment, consult the vehicle manufacturer or dealer in order to determine whether these electronic circuits will perform normally when the radio is transmitting.Preparation when drilling holesCaution: When drilling holes in the vehicle, check that drill-ing at the selected points will not damage existing wiring, petrol tanks, fuel lines, brake pipes or battery cables.Vehicles powered by liquefied petroleum gas (LPG)Caution: Radio installation in vehicles powered by LPG with the LPG container in a sealed-off space within the interior of the vehicle must conform to the National Fire Protection Association Standard NFPA 58. This standard states that the radio equipment installa-tion must meet the following requirements.■The space containing the radio equipment shall be iso-lated by a seal from the space containing the LPG con-tainer and its fitting.■Outside filling connections shall be used for the LPG con-tainer and its fittings.■The LPG container space shall be vented to the outside of the vehicle.Radio installation in gas or fuel tankersSpecial conditions must be observed when installing a radio in gas and fuel tankers. Consult your radio provider or Tait-accredited service centre for more details.Non-standard radio installationsThe installation U-bracket described in this guide has been designed so that there is enough airflow around the radio to provide cooling.
26 Installation warningsEnglishIf a non-standard installation method is used, care must be taken that sufficient heat can be dissipated from the radio heatsink fins and the bottom surface of the radio chassis. For this to be achieved, there must be a gap of more than 10mm (3/8 inch) between the bottom surface of the radio chassis and the mounting surface.Negative ground supplyTM8100 radios are designed to operate only in a negative ground system.mounting surface10mm (3/8 inch)
Installation planning 27EnglishInstallation planningThe procedures outlined in this and the following sections are for installing a TM8100 radio in a vehicle, using a standard U-bracket.The following topics are covered in this section:■MPT 1362 code of practice■checking equipment■installation tools■selecting the mounting position.MPT 1362 code of practiceTM8100 radios should be installed in accordance with the MPT 1362 Code of Practice. This code of practice covers the installation of mobile radio equipment in land based vehicles and has been developed by the United Kingdom Office of Communication (Ofcom).Website: For the full text of the MPT 1362 Code of Practice, go to the Ofcom website, http://www.ofcom.org.uk/codes_guidelines/radio_comms/radio_equip_stnds/.Checking equipmentUnpack the radio and check that you have the following items:■radio control head with connecting loom■radio body■microphone with microphone clip and screws■U-bracket installation kit, consisting of:—U-bracket—thumbscrews— self-drilling screws and washers— power cable with DC connector— 10A fuses (25W radios)— 20A fuses (40W/50W radios)
28 Installation planningEnglish— fuse holders— receptacles for a remote speaker (speaker not included)— BNC or mini-UHF antenna plug.Installation toolsThe following installation tools may be required:■portable drill and drill bit■Pozidriv screwdriver■8mm (5/16 inch) socket (or Pozidriv screwdriver)■BNC or mini-UHF crimp tool■fuse crimp tool■in-line RF power meter capable of measuring forward and reflected power at the operating frequency of the radio.Microphone clip installation toolsThe following installation tools may be required for installing the microphone:■centre punch■drill bit■Pozidriv screwdriver■hammer.Selecting the mounting positionInspect the vehicle and determine the safest and most convenient location for mounting the radio.The installation must meet the following requirements:■sufficient clearance behind the radio for the heatsink and cables■a large enough flat surface so that the mounting bracket will not be distorted■no danger of the radio interfering with air bag deployment.
Radio installation 29EnglishRadio installationThe following topics are covered in this section:■installing and removing the control head■installing the microphone■installing the antenna■installing the power cable■mounting the U-bracket■installing the radio in the U-bracket■TM8105 programming connector■checking the installation■other installation options.Installing and removing the control headCaution: The control head contains devices which can be damaged by static discharges. Always install or remove the control head in a static-safe environment. Website: For information on antistatic precautions, go to the Electrostatic Discharge Association (ESD) website, http://www.esda.org.Installing the control head on the radio bodyNote: The way in which the U-bracket is mounted deter-mines which way up the control head is mounted on the radio body. The numbers in the diagram on the following page refer to the numbered steps below.1Plug the control head loom onto the control head connector.2Insert the bottom edge of the control head onto the two clips in the front of the radio chassis, then snap into place.
30 Radio installationEnglishRemoving the control headCaution: During this procedure, take care that the control-head seal is not damaged. Damage to this seal reduces environmental protection.1On the underside of the radio, insert a 5mm (3/16 inch) flat-bladed screwdriver between the control head and the control-head seal, in either position   or  .Insertion points   and   are lever points and are indi-cated on the radio chassis by a dot-dash-dot pattern (•–•).2Use the screwdriver to lift the control head off the chassis clip, then repeat in the other position.The control head can now be removed from the radio body.2121212lever pointcontrol-head sealindication of lever point12
Radio installation 31EnglishInstalling the microphoneA microphone and microphone clip are only used for radios with a user interface.Connecting the microphoneCaution: The microphone grommet must be installed when-ever the microphone is plugged into the micro-phone socket. When installed, the grommet has two functions:■to prevent damage to the microphone socket when there is movement of the microphone cord, and■to ensure that the control head is sealed against water, dust and other environmental hazards.To install the microphone:1Plug the microphone into the microphone socket.2Slide the microphone grommet along the microphone cord and push two adjacent corners of the grommet into the microphone socket cavity.3Squeeze the grommet and push the remaining corners into position.4Check that the grommet is seated correctly in the cavity.Installing the microphone clipCaution: Only install the microphone clip provided. If a non-standard microphone clip is used, the correct oper-ation of the microphone hookswitch cannot be guaranteed.Install the microphone clip in the most convenient location for the radio user. It must be installed:■within easy reach of the user, and■in such a position that the microphone PTT key cannot be inadvertently activated or jammed on.microphonegrommetcontrol head
32 Radio installationEnglishInstalling the antennaInstall the external antenna according to the supplier’s instructions. Good quality 50 ohm coaxial cable must be used, such as RG58 or UR76.Caution: The cable should be routed in a manner that mini-mizes coupling into the electronic control systems of the vehicle.Caution: Avoid sharp bends in the cable. These distort the cable and alter its electrical characteristics.Warning: RF exposure hazardTo comply with FCC RF exposure limits:1Mount the antenna at a location such that no person or persons can come closer than 0.9m (35 inches) to the antenna.2For 25W radios, the radio must be installed using an externally mounted antenna with a gain of either a 2.15dBi or 5.15dBi gain.3For 40W/50W radios:— VHF radios must be installed using an antenna mounted centrally on the vehicle roof, with a gain of 2.15dBi or 5.15dBi.— UHF radios must be installed using an antenna either mounted centrally on the vehicle roof with a gain of 2.15dBi or 5.65dBi, or mounted centrally on the trunk with a gain of 5.65dBi.Antenna termination1Run the free end of the coaxial cable to the radio’s mounting position and cut it to length, allowing 20 - 30cm (8 - 12 inches) excess.Caution: The cable should be protected from engine heat, sharp edges and from being pinched or crushed.2Terminate the free end of the cable with the BNC or mini-UHF plug.
Radio installation 33EnglishInstalling the power cableOne end of the power cable is connected to the vehicle battery and the other end plugs into the radio’s power connector. Power connectorThe power connector on 25W radios is different to the power connector on 40W/50W radios. The following tables explain the pin allocations for each power connector.25W radio power connector40W/50W radio power connectorPin Signal name Description1 AGND earth return for radio body power source2 SPK– external speaker output3 SPK+ external speaker output4 13V8_BATT DC power input for radio body and control headrear view25W radioPin Signal name Description1 13V8_BATT DC power input for radio body and control head2 SPK– external speaker output3 SPK+ external speaker output4 AGND earth return for radio body power source40W/50W radiorear view
34 Radio installationEnglishBattery supply voltageThis radio is designed to operate from a nominal 12V negative ground supply and may draw up to 8A of current (25W radios) or 15A of current (40W/50W radios). The radio will tolerate a supply voltage range of 10.8V to 16.0V at the radio.Caution: In vehicles with a supply voltage greater than 16.0V, such as many trucks, it is essential to provide a suitably rated DC to DC converter. This will isolate the radio from excessive battery voltage and provide the correct DC operating conditions.Connecting the power cableCaution: Disconnecting the vehicle’s battery may cause problems with electronic equipment, such as vehi-cle alarms, engine management systems and in-car entertainment systems. Check that the vehicle owner has the necessary information to make all electronic equipment function correctly after battery reconnection.Caution: If the battery is not disconnected, exercise extreme caution throughout the installation and install the fuses only when the installation is ready to be checked (see “Checking the installation” on page 37).1Disconnect the vehicle’s battery, unless specifically prohibited from doing so by the customer, vehicle manu-facturer, agent or supplier.2Run the power cable between the radio’s mounting posi-tion and the vehicle battery.Caution:The power cable should be protected from engine heat, sharp edges and from being pinched or crushed.3Cut the power cable to length, allowing about 20cm (8 inches) excess at the radio end.
Radio installation 35English4Cut the negative and the positive wires where the in-line fuse holders will be placed (as close to the battery as possible).Caution: Do not install the fuses until the installation is ready to be checked.5Insert each end of the negative wire into one of the in-line fuse holders and crimp them to force the metal contacts onto the wires. 6Connect the negative wire to the battery ground.7Repeat step 5 for the positive wire and connect it to the positive terminal of the battery.Mounting the U-bracketThe U-bracket can be used to install the radio on the dash-board or on any sufficiently flat surface, using the self-drilling screws and washers provided in the installation kit. Caution: When mounting the radio, check whether the mounting surface needs to be reinforced.Caution: The U-bracket must be installed using at least four screws.1If the U-bracket is being mounted over a curved surface, bend the U-bracket tabs slightly, to match the surface shape.2Drill any holes required for cables and install suitable grommets or bushings in the holes.Caution: Check that the U-bracket is not distorted when the screws are tightened.3Screw the U-bracket in the chosen mounting position using the self-drilling screws and washers provided.Tip: For more precise positioning, predrill   3 mm (1/8 inch) pilot holes for
36 Radio installationEnglishthe self-drilling screws. Reduce the hole size in metal that is less than 1mm (1/32 inch) thick.Installing the radio in the U-bracket1Connect the antenna and power cables to the rear of the radio.2Position the radio in the U-bracket so that the holes in the U-bracket line up with the holes in the radio chassis.3Screw the radio into position using the four thumb screws but without fully tightening the screws.4Position the radio in the U-bracket for best viewing angle, then tighten the thumb screws.
Radio installation 37EnglishTM8105 programming connectorThe TM8105 has a 9-way D-range plug on the control head, for remote connection. The pin allocations of the programming connector are shown in the following diagram and table.programmingconnectorPin Signal Description1RX_AUD receive audio output (after volume control)2 TXD asynchronous serial port: transmit data3MIC_AUD microphone audio input4RXD asynchronous serial port: receive data5ON_OFF hardware power on/software power off6+13V8_BATT unswitched 13.8V power supply7PTT PTT input from microphone, with hookswitch signal8AGND analogue ground9DGND digital ground
38 Radio installationEnglishChecking the installation1Insert the fuses into the power leads.2Switch on the radio to confirm that it is operational.Caution: Do not transmit yet.3Connect an in-line power meter between the radio and the antenna.4Transmit and measure the forward and reflected power levels.Less than 4% of the forward power should be reflected. If this is not achieved, check the installation, including the antenna length.5Radios with a user interface only:Once the reflected power levels are within tolerance, make a call to another party on the radio (see “Making a call” on page 16).Other installation optionsContact your radio provider for further information.
38 Tait general software licence agreementTait general software licence agreementThis legal document is an Agreement between you (the “Licensee”) and Tait Electronics Limited (“Tait”). By using any of the Software or Firmware items prior-installed in the related Tait product, included on this CD or downloaded from the Tait website, (hereinafter referred to as “the Soft-ware or Firmware”) you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, do not install and use any of the Software or Firmware. If you install and use any of the Software or Firmware that will be deemed to be acceptance of the terms of this licence agreement.The terms of this agreement shall apply subject only to any express written terms of agreement to the contrary between Tait and the Licensee.LicenceTAIT GRANTS TO YOU AS LICENSEE THE NON-EXCLUSIVE RIGHT TO USE THE SOFTWARE OR FIRMWARE ON A SINGLE MACHINE PROVIDED YOU MAY ONLY:1COPY THE SOFTWARE OR FIRMWARE INTO ANY MACHINE READABLE OR PRINTED FORM FOR BACKUP PURPOSES IN SUPPORT OF YOUR USE OF THE PROGRAM ON THE SINGLE MACHINE (CERTAIN PROGRAMS, HOWEVER, MAY INCLUDE MECHANISMS TO LIMIT OR INHIBIT COPYING, THEY ARE MARKED “COPY PROTECTED”), PROVIDED THE COPYRIGHT NOTICE MUST BE REPRODUCED AND INCLUDED ON ANY SUCH COPY OF THE SOFTWARE OR FIRMWARE; AND / OR 2MERGE IT INTO ANOTHER PROGRAM FOR YOUR USE ON THE SINGLE MACHINE (ANY PORTION OF ANY SOFTWARE OR FIRMWARE MERGED INTO ANOTHER PROGRAM WILL CONTINUE TO BE SUBJECT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT).THE LICENSEE MAY NOT DUPLICATE, MODIFY, REVERSE COMPILE OR REVERSE ASSEMBLE ANY SOFTWARE OR FIRMWARE IN WHOLE OR PART.Title to SoftwareTHIS AGREEMENT DOES NOT CONSTITUTE A CONTRACT OF SALE IN RELATION TO THE SOFTWARE OR FIRMWARE SUPPLIED TO THE LICENSEE. NOT WITHSTANDING THE LICENSEE MAY OWN THE MAGNETIC OR OTHER PHYSICAL MEDIA ON WHICH THE SOFTWARE OR FIRMWARE WAS ORIGINALLY SUPPLIED, OR HAS SUBSEQUENTLY BEEN RECORDED OR FIXED, IT IS A FUNDAMENTAL TERM OF THIS AGREEMENT THAT AT ALL TIMES TITLE AND OWNERSHIP OF THE SOFTWARE OR FIRMWARE, WHETHER ON THE ORIGINAL MEDIA OR OTHERWISE, SHALL REMAIN VESTED IN TAIT OR THIRD PARTIES WHO HAVE GRANTED LICENCES TO TAIT.Term and Termination THIS LICENCE SHALL BE EFFECTIVE UNTIL TERMINATED IN ACCORDANCE WITH THE PROVISIONS OF THIS AGREEMENT. THE LICENSEE MAY TERMI-NATE THIS LICENCE AT ANY TIME BY DESTROYING ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCIATED WRITTEN MATERIALS. THIS LICENCE WILL BE TERMINATED AUTOMATICALLY AND WITHOUT NOTICE FROM TAIT IN THE EVENT THAT THE LICENSEE FAILS TO COMPLY WITH ANY TERM OR CONDITION OF THIS AGREEMENT. THE LICENSEE AGREES TO DESTROY ALL COPIES OF THE SOFTWARE OR FIRMWARE AND ASSOCI-ATED WRITTEN MATERIALS IN THE EVENT OF SUCH TERMINATION.Limited Warranty THE SOFTWARE OR FIRMWARE IS SUPPLIED BY TAIT AND ACCEPTED BY THE LICENSEE “AS IS” WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT BEING LIMITED TO ANY IMPLIED WARRANTIES AS TO MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. THE LICENSEE ACKNOWLEDGES THAT THE SOFT-WARE OR FIRMWARE IS USED BY IT IN BUSINESS AND ACCORDINGLY TO THE MAXIMUM EXTENT PERMITTED BY LAW NO TERMS OR WARRANTIES WHICH ARE IMPLIED BY LEGISLATION SHALL APPLY TO THIS AGREEMENT. TAIT DOES NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE OR FIRMWARE WILL MEET THE LICENSEE’S REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE OR FIRMWARE WILL BE UNINTERRUPTED OR ERROR FREE.Exclusion of Liability TAIT’S ENTIRE LIABILITY AND THE LICENSEE’S EXCLUSIVE REMEDY SHALL BE THE FOLLOWING:1IN NO CIRCUMSTANCES SHALL TAIT BE UNDER ANY LIABILITY TO THE LICENSEE, OR ANY OTHER PERSON WHATSOEVER, FOR ANY DIRECT OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH ANY USE OR INABILITY OF USING THE SOFTWARE OR FIRMWARE.2TAIT WARRANTS THE OPERATION OF THE SOFTWARE OR FIRMWARE ONLY WITH THE OPERATING SYSTEM FOR WHICH IT WAS DESIGNED. USE OF THE SOFTWARE OR FIRMWARE WITH AN OPERATING SYSTEM OTHER THAN THAT FOR WHICH IT WAS DESIGNED MAY NOT BE SUPPORTED BY TAIT, UNLESS OTHERWISE EXPRESSLY AGREED BY TAIT.GeneralTHE LICENSEE CONFIRMS THAT IT SHALL COMPLY WITH THE PROVISIONS OF LAW IN RELATION TO THE SOFTWARE OR FIRMWARE.Law and Jurisdiction THIS AGREEMENT SHALL BE SUBJECT TO AND CONSTRUED IN ACCORD-ANCE WITH NEW ZEALAND LAW AND DISPUTES BETWEEN THE PARTIES CONCERNING THE PROVISIONS HEREOF SHALL BE DETERMINED BY THE NEW ZEALAND COURTS OF LAW. PROVIDED HOWEVER TAIT MAY AT ITS ELECTION BRING PROCEEDINGS FOR BREACH OF THE TERMS HEREOF OR FOR THE ENFORCEMENT OF ANY JUDGEMENT IN RELATION TO A BREACH OF THE TERMS HEREOF IN ANY JURISDICTION TAIT CONSIDERS FIT FOR THE PURPOSE OF ENSURING COMPLIANCE WITH THE TERMS HEREOF OR OBTAINING RELIEF FOR BREACH OF THE TERMS HEREOF.No Dealings THE LICENSEE MAY NOT SUBLICENSE, ASSIGN OR TRANSFER THE LICENCE OR THE PROGRAM EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT. ANY ATTEMPT OTHERWISE TO SUBLICENSE, ASSIGN OR TRANSFER ANY OF THE RIGHTS, DUTIES OR OBLIGATIONS HEREUNDER IS VOID.No Other Terms THE LICENSEE ACKNOWLEDGES THAT IT HAS READ THIS AGREEMENT, UNDERSTANDS IT AND AGREES TO BE BOUND BY ITS TERMS AND CONDI-TIONS. THE LICENSEE FURTHER AGREES THAT SUBJECT ONLY TO ANY EXPRESS WRITTEN TERMS OF AGREEMENT TO THE CONTRARY BETWEEN TAIT AND THE LICENSEE THIS IS THE COMPLETE AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN IT AND TAIT IN RELATION TO THE SOFTWARE OR FIRMWARE WHICH SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN AND ANY OTHER COMMUNICATIONS BETWEEN THE LICENSEE AND TAIT RELATING TO THE SOFTWARE OR FIRMWARE.

Navigation menu