Tandberg Tt1260 Users Manual Instruction

2015-02-03

• Preliminary Pages
  • List of Contents
  • About this Manual
  • Acknowledgements
  • Warnings, Cautions and Notes
  • EMC Compliance
  • Contact Information
• Chapter 1: Introduction
  • Scope of this Manual
    • Who Should Use this Manual
    • What this Manual Describes
      • Identifying the Equipment
      • Marketing Codes
      • Software Versions
  • Summary of Features
    • Main Features
    • Inputs
      • ASI Inputs (Decoders)
      • L-Band Inputs
      • Remote Control
      • Frame Synchronisation
    • Outputs
      • Transport Stream Outputs
      • Video Outputs
      • Audio Outputs
      • Data Output
      • Alarm Output
    • Conditional Access and Scrambling
  • The Satellite Receiver
    • Typical Satellite System
    • Input Connections
    • What the Satellite Receiver Does
    • Over-air Software Download (TANDBERG Director Systems)
  • The Decoder
    • Typical Decoder System
    • Input Connections
    • What the Decoder Does
  • TT1260 Control Modes
    • Introduction
    • Front Panel (Local) Modes
    • Serial Remote Control Mode
    • TANDBERG Director NCP Control Mode
  • Guided Tour
    • Construction
    • Front Panel Controls
    • Front Panel LEDs
    • Bit Error Ratio Measurement
    • Conditional Access and Scrambling Options
      • VideoGuard Director
      • Remote Authorisation System (RAS 1)
      • Basic Interoperable Scrambling System (BISS)
    • Rear Panel
• Chapter 2: Installing the Equipment
  • Read This First!
    • Handling
    • Installing the Equipment
    • Lifting
  • Preliminary Checks
    • Mechanical Inspection
    • Moving the Equipment Safely
  • Installing the Equipment
    • Fixing
    • Ventilation
      • Openings in the Covers
      • Care in Positioning
      • Protection from Moisture
    • Installing Cables - Safety
  • EMC Compliance Statements
    • EN 55022/AS/NZS 3548
    • FCC
  • AC Supply Operating Voltage and Fusing - Safety Information
    • AC Power Supply
    • AC Power Supply Cord
      • General
      • Wire Colours
    • Connecting the Equipment to the AC Power Supply
  • Technical Earth Connection
  • Signal Connections
    • General
    • TT1260 Base Unit (TT1260/DIRBAS)
      • Rear Panel View
      • ASI Out
      • Audio Outputs
      • Analogue Video Output
      • Digital Video Output
      • Frame Synchronisation
      • Ethernet
      • Remote Control
      • Alarm Connector and Relay
      • RS-232 Low-speed Asynchronous Data Output
    • Alarm Relay Card (TT1260/HDC/ALRM)
      • General
      • Rear Panel View
      • Connector Details
      • Alarm Option
  • Option Card Connectors
• Chapter 3: Operating the Equipment Locally
  • Powering the Equipment
    • Switching On
    • Power-up Operating Modes
  • Front Panel Controls and Pushbuttons
  • Front Panel Operating Modes
    • General
    • Navigate Mode
    • Edit Mode
  • Using the Local Controls
    • LCD Menu Descriptions
    • Selecting a Menu Option
    • Entering a Menu Value
  • Setting Up the Input (Menu #2)
    • Satellite Receiver
    • Decoder
  • Service Configuration (Menu #3)
    • Selecting a Service
      • Setting Up a Service
      • Setting Up the Power-up Service
    • Selecting the Video Component
    • Selecting the Audio Component
      • Introduction
      • Selecting the Audio Manually
    • Setting Up Async Data/Sync Data
    • Setting Up Teletext
    • Setting Up VBI
    • Viewing the PCR PID Menu
    • Viewing the Network ID Menu
    • Setting Up the Conditional Access/Scrambling (Menu #4)
      • Introduction
      • Remote Authorisation System (RAS) (Menu #4.1)
      • VideoGuard, RAS and BISS
      • Changing the VideoGuard Customer ID (Menu #4.3.2)
      • Basic Interoperable Scrambling System (BISS) (Menu #4.4)
    • Setting up the Transport Stream Output (TSO)
      • Set-up Procedure
      • Packet Lengths
      • ASI Output Mode
  • Setting Up the Alarms (Menu #5)
  • Setting Up System Parameters (Menu #6)
  • Restarting the Unit
  • Setting up Preset Services (Menu #1)
    • Using Preset Services
    • Setting up a Preset Service
• Chapter 4: Alarms
  • Introduction
  • Location of the Alarm and Indication LEDs
  • ALARM LED
  • Relays
• Chapter 5: Options
  • Option Card Locations
  • ASI Input Card (TT1260/HWO/ASI)
    • General
    • Rear Panel View
    • Connector Details
  • QPSK Input Card (TT1260/HWO/QPSK)
    • General
    • Rear Panel View
    • Connector Details
      • L-band Inputs
      • Audio Outputs
  • 8PSK/16QAM Card (TT1260/HWO/HM)
    • General
    • Rear Panel View
    • Connector Details
  • High Speed RS-422 Data Enabler Card (TT1260/HWO/HSDATA)
    • General
    • Rear Panel View
    • Connector Details
  • QPSK/8PSK/16QAM (TT1260/SWO/16QAM)
  • QPSK/8PSK (TT1260/SWO/8PSK)
  • Signal Protection Conditional Access (TT1260/SWO/SP)
  • RAS Mode-1 Conditional Access (TT1260/SWO/RAS)
  • VideoGuard Director CA/TANDBERG Director NCP (TT1260/SWO/DIR)
  • BISS-1/BISS-E (TT1260/SWO/BISS)
  • XLR Cable (TT1260/CABLE/XLR)
• Chapter 6: Preventive Maintenance and Fault-finding
  • Routine Checks
    • Cooling Fan
    • Cleaning
  • Servicing
    • Conditions Requiring Servicing
    • Replacement Parts
    • Checks on Completion of Servicing
  • Maintenance and Support Services - Warranty
  • Fault-finding
    • General
    • Factory Default Settings
    • Preliminary Investigations
    • Remote Control
  • Changing the Equipment Fuse
  • Disposal
    • Moulded Plugs
    • Equipment
• Annex A: Glossary
• Annex B: Technical Specification
  • Output
    • International Television Standards
    • Video
      • Supported Video Resolutions
      • Supported Video Bit-rates
      • Performance Figures
      • Vertical Blanking Signals
  • Audio Decoding and Output Stage
    • General
    • MPEG Audio
    • Dolby Digital AC-3 Audio
    • Linear Audio
  • Audio Output Format
    • General
    • Analogue Audio
    • Digital Audio
    • Embedded Audio
    • Audio Routing
    • Dual Mono
    • Lip Sync
    • Supported Audio Specifications
    • Supported Audio Bit-rates
    • Analogue Audio Performance
    • Digital Audio Outputs
  • Internal Decoder
  • Input Specifications
    • QPSK Satellite Receivers
      • General
      • LNB Power and Control
    • 8PSK/16QAM Satellite Receivers
    • Decoder
    • Frame Sync Connector
  • Output Specifications
    • Video Outputs
      • Analogue Composite Video
      • Digital Video
    • Audio Outputs
    • Data Outputs
      • RS-232 Asynchronous (Low-speed) Data
      • RS-422 Synchronous (High-speed) Data
    • Remote Control Connector
    • Alarm Connectors
  • Environmental
    • Conditions
    • Physical
  • Power Supply
  • Compliance
    • Safety
    • EMC
    • CE Marking
    • C-Tick Mark
• Annex C: Menus
  • LCD Menus
    • Using the Menus
    • Menu Descriptions
  • Menu Pages - Main Menu
  • The Menu Tree
  • Presets Menu Items (#1)
  • Input Status Menu (#2)
    • ASI Menu
    • QPSK Satellite Menu
    • 8PSK/16QAM Menu
  • Service Menu (#3)
    • Video Menu
    • Audio 1 Menu
    • Audio 2 Menu
    • Async/Sync Data Menus
    • Teletext Menu
    • VBI Menu
    • PCR PID Menu
    • Network ID Menu
  • Conditional Access Menu (#4)
    • RAS Mode Menu
    • Signal Protection Menu
    • Director Menu
    • BISS Mode 1 Menu
    • Broadcaster ID Menu
    • Transport Stream Output Menu
  • Alarms Menu (#5)
    • Satellite BER Alarm Setup Menu
    • Transport Stream Alarm Setup Menu
    • Video Alarm Setup Menu
    • Audio 1 Alarm Setup Menu
    • Audio 2 Alarm Setup Menu
  • System Menu (#6)
    • Setup Menu
    • IRD Details Menu
    • System Restart Menu
• Annex D: Using the TT1260 with the TANDBERG Director System
  • Configuring the TT1260 for Use With Director
    • Getting Started
    • Using the TT1260 in the Over-air Mode
  • Response to Over-air Commands
    • General
    • Display On-screen Display (OSD) Messages
    • Store Carrier Data
    • Set Power-up Channel
    • Force Carrier Retune
    • Force Service Selection
    • Set Emergency Channel
    • Set Relays
    • Local Lockout
    • Abort NCP Command
• Annex E: Language Abbreviations
• Annex F: Factory Defaults
• Annex G: Quick Reference Guide
  • Setting Up the Input
    • Satellite Receiver
    • Decoder
  • Service Configuration
    • Setting Up a Service
    • Setting Up the Service Hunt Mode
    • Setting up a Preset Service
    • Loading a Preset Service
• Index
• Forms
  • PROFORMA INVOICE
  • Repair/service Order Form